XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F100F512ABXQMA1 ✓ NakahandaXMC4400F100F512ABXQMA1 Ulas
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. In the system hierarchy, the XMC4400 is an MCU, a more specific form of embedded processor and semiconductor. Unlike a general-purpose desktop CPU, an MCU is designed around deterministic control, communication, and real-time system tasks, with its peripherals and memory optimized for embedded products.
The device's principal characteristics include an Arm Cortex-M4 processor core, 120 MHz operating frequency, 32-bit architecture, and 512 KB of flash. Infineon identifies the XMC4400-F100F512-BA as an industrial 32-bit microcontroller with a 10/100 Ethernet MAC. The PG-LQFP-100-11 package provides 100 externally accessible connections for digital control, communications, clocking, power, debug, and analog-interface requirements.
The Cortex-M4 architecture uses the Arm Thumb instruction set and supports efficient interrupt-driven control software. Its floating-point capability makes it suitable for applications that combine digital control with numerical processing. The integrated Ethernet MAC supports connected industrial equipment, although the complete electrical design still requires the external magnetics, clocking, protection, and connector implementation described by Infineon.
Typical uses include industrial Ethernet controllers, factory automation equipment, motor-control systems, building automation interfaces, connected measurement instruments, and embedded network gateways. The 120 MHz processing rate provides useful headroom for communication stacks, supervisory control, diagnostics, and real-time control tasks when the software architecture and interrupt latency are designed together.
PCB planning should begin with the manufacturer's pin-description table and reference design because the 100-pin package contains dedicated power, ground, debug, Ethernet, analog, and digital functions. Pay particular attention to ground distribution, decoupling, clock source selection, Ethernet magnetics placement, and programming or debug access before finalizing the board layout.
This product record combines the manufacturer ordering information, package and memory details, Ethernet function description, and source links needed for engineering review. It also organizes replacement considerations and design guidance so engineers can assess fit, firmware impact, and layout compatibility before committing a new design.
Mga alternatibo na pwedeng ilagay na XMC4400F100F512ABXQMA1 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XMC4400F100F512ABXQMA1 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Flash Organization, Flash Memory, Architecture.
XMC4400F100F512BAXQMA1
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XMC4400F100F512BAXUMA1
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XMC4400F100K512BAXQMA1
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XMC4400F100K512BAXUMA1
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XMC4500F100K1024ACXQSA1
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XMC4400F100F512ABXQMA1 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Ethernet MAC | 10/100 Ethernet MAC |
| Packhaging | PG-LQFP-100-11 |
| Bilang ng Pin | 100 pins |
| Uri ng Pagpapasok | Surface mount |
| Product Family | XMC4000 |
| Product Grade | Industrial |
| Core Count | 1 core |
| Instruction Set | Arm Thumb |
| Ethernet Support | 10/100 Ethernet MAC |
Gabay sa Pin Configuration ng XMC4400F100F512ABXQMA1 pg-lqfp-100-11
Pin configuration para sa XMC4400F100F512ABXQMA1 (pg-lqfp-100-11 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XMC4400F100F512ABXQMA1.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XMC4400F100F512ABXQMA1 ay nararapat para sa 6 aplikasyons: Industrial Ethernet Controller, Factory Automation Equipment, Motor Control System, Building Automation Gateway, Connected Measurement Instrument, Embedded Network Gateway.
Industrial Ethernet Controller
The XMC4400F100F512ABXQMA1 fits an industrial Ethernet controller because its 120 MHz Arm Cortex-M4 core can execute protocol processing and supervisory logic while the integrated 10/100 Ethernet MAC handles wired communications. The 512 KB flash provides room for bootloader code, network stacks, diagnostics, and control functions. The 100-pin PG-LQFP-100-11 package also provides more external connections than compact MCUs. Implement the physical network interface according to Infineon's reference layout, including suitable isolation or magnetics, controlled clocking, and protection appropriate to the installation environment.
Inirekomenda
Factory Automation Equipment
The XMC4400F100F512ABXQMA1 is suitable for factory automation modules that combine deterministic control with centralized communications. Its 120 MHz Cortex-M4 core can service interrupts, communication tasks, diagnostics, and machine-state logic, while the 10/100 Ethernet MAC supports connection to supervisory systems. The 100-pin LQFP package allows direct attachment of sensors, actuators, encoders, and digital field-bus interfaces. Engineers should partition real-time and non-real-time tasks, validate worst-case interrupt latency, and use the Infineon pin description and common-ground requirements to establish a reliable industrial control board.
Inirekomenda
Motor Control System
The XMC4400F100F512ABXQMA1 can serve as the supervisory processor in an industrial motor-control system because the 120 MHz Cortex-M4 core supports fast control-loop execution, fault handling, and communications. The 10/100 Ethernet MAC allows the controller to exchange commands, operating data, and diagnostics with a higher-level controller. Its 100-pin package provides sufficient pin count for digital interfaces and supporting functions. Power-stage timing, analog measurements, protection, and ground separation must be designed independently of the MCU, while software should include deterministic task scheduling and comprehensive fault recovery.
Inirekomenda
Building Automation Gateway
The XMC4400F100F512ABXQMA1 is appropriate for a building automation gateway that aggregates sensor information, controls connected equipment, and maintains wired network communication. The 512 KB flash can support a bootloader, protocol handlers, configuration storage, and device management logic, while the Cortex-M4 core leaves processing capacity for local decisions. The 100-pin package offers broader peripheral connectivity than a minimal microcontroller. Design the product for reliable 24-hour operation by including watchdog recovery, brownout handling, secure firmware update procedures, and diagnostics for communications and field-bus errors.
Inirekomenda
Connected Measurement Instrument
The XMC4400F100F512ABXQMA1 can support connected measurement instruments that combine signal processing, control, data formatting, and Ethernet reporting. Its 120 MHz 32-bit Cortex-M4 core is well suited to interrupt-driven acquisition and real-time calculations, and its 512 KB flash provides capacity for measurement firmware and communication protocols. The 100-pin package makes it practical to connect external converters, reference signals, status indicators, and communications circuitry. Accuracy and noise performance depend on the analog front end and grounding, so keep sensitive analog and digital return paths separated and follow the manufacturer's recommended reference layouts.
Inirekomenda
Embedded Network Gateway
The XMC4400F100F512ABXQMA1 suits an embedded network gateway where a real-time MCU must bridge local interfaces to a 10/100 Ethernet network. Its Cortex-M4 performance supports protocol translation, data filtering, remote diagnostics, and local control, while the integrated Ethernet MAC reduces the need for a separate network controller. With 512 KB flash, the device can hold networking, update, and application layers within a single package. For a production gateway, define update rollback behavior, manage boot settings safely, validate network timing, and isolate external cabling with appropriately rated protection components.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XMC4400F100F512ABXQMA1 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XMC4400F100F512BAXQMA1 | XMC4400F100F512BAXUMA1 | XMC4400F100K512BAXQMA1 | XMC4400F100K512BAXUMA1 | XMC4500F100K1024ACXQSA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Product Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4500 |
| Core Count | 1 core | 1 core | 1 core | 1 core | 1 core | 1 core |
| Industrial Qualification | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
Pangunahing mga Pagkakaiba
- Exact XMC4400-F100F512-BA core and memory configuration (kumpara saXMC4500F100K1024ACXQSA1)
- Integrated 10/100 Ethernet MAC in the XMC4000 industrial platform (kumpara saXMC4300F100K256BAXQMA1)
- Same 120 MHz Arm Cortex-M4 performance class (kumpara saXMC4500F100K1024ACXQSA1)
Talaan ng Disenyo
Build the PCB from the Infineon PG-LQFP-100-11 land pattern and pin-description table rather than inferring connections from a generic 100-pin symbol. Preserve the common-ground concept by connecting all designated VSS, VSSA, and VSSO pins to the intended ground plane. Review exposed-pad requirements in the package drawing, place input and output capacitors close to their assigned pins, and keep the 120 MHz clock and Ethernet differential routes away from noisy switching stages.
Treat the Ethernet and clock paths as controlled-impedance signals from the outset. Follow Infineon's Ethernet reference layout for magnetics, termination, and isolation placement, and avoid introducing unnecessary stubs beneath the MCU or network interface. Provide continuous reference planes and a deliberate grounding strategy so that switching currents from motors, relays, or external power converters do not flow through the processor and analog signal-return paths.
Do not treat an ordering-code similarity as proof of interchangeability. The target contains XMC4400-F100F512-BA, while nearby XMC4400 and XMC4500 order codes can differ in flash capacity, qualification, temperature grade, or shipment form. Before substitution, compare the complete Infineon ordering table, pin-description table, electrical characteristics, errata, and reference manual. Firmware should also be retested for register, peripheral, and initialization differences.
Separate clean MCU supplies from analog and high-current loads where the system architecture permits. Place the required decoupling network directly at the relevant supply pins and follow the datasheet's voltage and capacitance requirements. Use a controlled power sequence for Ethernet and external circuitry, and verify brownout behavior during startup, firmware update, load transients, and communication faults. Confirm absolute maximum and recommended operating conditions for the exact ordering variant.
Impormasyon ng Pagsunod sa Kautusan
The XMC4400-F100F512-BA is identified as an industrial microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for this exact ordering code require confirmation from the manufacturer or shipment documentation.