XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX60-11FFG672C ✗ জীবনকালের সমাপ্তিXC4VFX60-11FFG672C সারাংশ
An FPGA is a semiconductor whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. The Virtex-4 FX family combines configurable logic blocks with dedicated processing, memory, clocking, and high-speed serial resources. This hierarchy places the XC4VFX60 in the FPGA and CPLD category, where parallel programmable logic, embedded hard processors, and high-speed I/O can support complete digital subsystems on one device.
Key resources include 4,276,224 RAM bits, two embedded PowerPC 405 processor cores, and as many as 16 RocketIO multi-gigabit transceivers. The device provides 352 user I/Os and operates from a nominal 1.2 V core supply, with a reported range of 1.14 V to 1.26 V. These resources make the FPGA suitable for parallel data processing, embedded control, telecommunications, industrial equipment, and high-speed serial interfaces.
The Virtex-4 FX architecture is implemented on 90 nm copper CMOS technology. Its combination of 6,320 configurable logic blocks and hard processor cores allows designers to partition a design between programmable logic and dedicated embedded processing. The 1,181 MHz figure is the maximum internal clock stated for this family, rather than a guarantee that every design or I/O interface will operate at that rate.
Typical applications include telecom line cards, industrial control systems, network interface equipment, high-speed protocol bridges, embedded processors, and test systems requiring substantial parallel logic. The 672-ball FCBGA also provides a large pin count for high-speed differential pairs, memory connections, clocks, and programmable I/O. The number of available RocketIO channels depends on the selected device, package, pin configuration, and design constraints.
Designers should verify the exact bank voltages, pin assignments, configuration requirements, and differential I/O rules against the AMD package pinout files before layout release. A 27 mm by 27 mm BGA requires careful escape routing, adequate via access, and a thermal design that accounts for the concentration of power and ground balls beneath the device.
This page combines the device architecture, package characteristics, configuration guidance, drop-in family alternatives, and application-oriented design notes. It also provides search-focused technical comparisons for engineers evaluating PCB reuse, speed-grade substitution, temperature-grade substitution, and FPGA resource planning.
এর জন্য ড্রপ-ইন বিকল্প XC4VFX60-11FFG672C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC4VFX60-11FFG672C (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Process Technology, AEC-Q100 Qualification, Speed Grade, Core Supply Voltage.
XC4VFX60-10FFG672C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC4VFX60-12FFG672C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC4VFX60-11FFG672I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC4VFX60-10FFG672I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC4VFX60-12FFG672I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC4VFX60-11FFG672C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs |
| Maximum Internal Frequency | 1,181 MHz |
| Total RAM | 4,276,224 bits |
| Embedded Processor Cores | 2 PowerPC 405 RISC cores |
| RocketIO Transceivers | Up to 16 multi-gigabit transceivers |
| RocketIO Data Rate | 622 Mb/s to 6.5 Gb/s |
| User I/O Count | 352 I/Os |
| Core Supply Voltage | 1.14 V to 1.26 V, nominal 1.2 V |
| Process Technology | 90 nm copper CMOS |
| প্যাকেজ | 672-ball FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| অপারেটিং তাপমাত্রা | 0°C to 85°C |
| Device Logic Family | CMOS |
| Combinatorial CLB Delay | 0.17 ns per CLB |
| Speed Grade | -11 |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
XC4VFX60-11FFG672C 27 mm x 27 mm পিন কনফিগারেশন গাইড
XC4VFX60-11FFG672C (27 mm x 27 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC4VFX60-11FFG672C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC4VFX60-11FFG672C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Telecommunications Line Cards, High-Speed Network Interface Equipment, Industrial Control and Automation, Embedded Processor Subsystems, High-Speed Data Acquisition and Signal Processing, Aerospace and Defense Test Equipment.
Telecommunications Line Cards
The XC4VFX60-11FFG672C fits telecommunications line-card designs that combine high-throughput serial links with substantial configurable logic. Its up to 16 RocketIO transceivers can operate from 622 Mb/s to 6.5 Gb/s, while 56,880 logic cells support packet processing, framing, buffering, and control functions. The two embedded PowerPC 405 cores allow software to handle supervisory or real-time tasks without offloading every function to programmable logic. Use the 352 user I/Os for parallel management interfaces and slower external connectivity, then verify each transceiver's legal encoding, reference clock, and lane allocation for the target protocol.
সুপারিশকৃত
High-Speed Network Interface Equipment
The XC4VFX60-11FFG672C is suitable for network interface equipment that separates high-speed serial traffic from parallel packet-processing logic. RocketIO transceivers can provide multi-gigabit physical interfaces, while the 6,320 CLBs implement routing, classification, queues, and protocol adaptation. Its 4,276,224 RAM bits support buffering and working storage, and the two PowerPC 405 cores can supervise the FPGA configuration or handle control-plane software. The maximum 1,181 MHz internal frequency provides substantial timing headroom for many designs, but actual interface throughput must be established through placement, timing analysis, and board-level signal-integrity validation.
সুপারিশকৃত
Industrial Control and Automation
The XC4VFX60-11FFG672C supports industrial control and automation systems that combine deterministic parallel logic with embedded processor functionality. The commercial-temperature version operates from 0°C to 85°C, making it appropriate for controlled indoor equipment that remains within that range. Engineers can map machine-control, sequencing, and I/O arbitration into 6,320 CLBs while the two PowerPC 405 cores handle supervisory tasks or real-time control code. Its 352 user I/Os provide substantial connectivity for digital and analog interfaces, although every external driver and transceiver must be checked against the device's I/O standard, voltage, and timing limits.
সুপারিশকৃত
Embedded Processor Subsystems
The XC4VFX60-11FFG672C is useful when a design needs programmable hardware and embedded software in one FPGA. Two hard PowerPC 405 RISC cores can execute firmware or application tasks, while 56,880 logic cells accelerate parallel algorithms, custom peripherals, or data movement. The device's 4,276,224 RAM bits provide on-chip storage, and 352 user I/Os can connect the subsystem to external memories and control logic. This partition reduces reliance on external glue logic, but partitioning must be planned carefully because fixed hard blocks and dedicated resources are not interchangeable with general-purpose configurable logic.
সুপারিশকৃত
High-Speed Data Acquisition and Signal Processing
The XC4VFX60-11FFG672C can implement parallel data acquisition, filtering, correlation, or other fixed-function signal processing beside embedded control. Its 6,320 configurable logic blocks allow wide pipelines to operate concurrently, while the 4,276,224 RAM bits support sample buffers, look-up tables, and working memory. The two processor cores can coordinate control flow and configuration, and the 352 user I/Os provide interfaces for converters, memory devices, and synchronization signals. For very high-rate links, use RocketIO with suitable clocking and equalization, and verify analog-interface timing independently because the maximum internal frequency does not determine external converter bandwidth.
সুপারিশকৃত
Aerospace and Defense Test Equipment
The XC4VFX60-11FFG672C can be used in ground-based aerospace and defense test systems where programmable logic, embedded processors, and high-speed serial communication are required. Its 16 potential RocketIO channels support multi-gigabit test interfaces, while the large programmable fabric can implement protocol engines, capture logic, and timing checks. The two PowerPC 405 cores can coordinate test sequences and maintain control interfaces, and 352 user I/Os support instrumentation and trigger signals. The commercial C temperature grade limits direct use to 0°C to 85°C, so deployed environments outside that range should use an appropriately qualified device and formal procurement process.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC4VFX60-11FFG672C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC4VFX60-10FFG672C | XC4VFX60-12FFG672C | XC4VFX60-11FFG672I | XC4VFX60-10FFG672I | XC4VFX60-12FFG672I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm |
| Logic Cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs |
| Total RAM | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits |
| User I/O Count | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os |
| Embedded Processor Cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores |
| RocketIO Transceivers | Up to 16 transceivers, 622 Mb/s to 6.5 Gb/s | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers |
মূল পার্থক্যসমূহ
- Preserves the complete resource configuration across ordering-code alternatives (বনামXC4VFX60-11FFG672I)
- Offers a one-step speed-grade upgrade without changing the core resource counts (বনামXC4VFX60-10FFG672C)
- Highest listed same-family speed-grade option retains the target architecture (বনামXC4VFX60-12FFG672C)
- Combines programmable logic, embedded processors, and serial transceivers in one FPGA (বনামXC4VFX60-10FFG672I)
ডিজাইন নোট
Use the AMD Virtex-4 package pinout file as the authoritative ball map for the 672-footprint PCB. Keep configuration pins, dedicated clock inputs, RocketIO balls, power, ground, and user I/O clearly separated in the schematic-to-PCB review. Place all prescribed decoupling capacitors close to their associated supply balls, maintain the package's via and ball-pitch requirements, and avoid routing high-speed differential pairs beneath areas that cannot support controlled impedance.
The nominal core voltage is 1.2 V, with a reported operating range of 1.14 V to 1.26 V. Use separate, low-impedance distribution for the core and I/O supply banks, and verify regulator sequencing against the AMD device guidance. Estimated: power equals core voltage multiplied by core current plus the voltage and current of each active I/O bank; actual consumption depends on clocking, utilization, I/O standards, and state. Generate a project-specific power estimate after synthesis and implementation.
A 27 mm by 27 mm FCBGA concentrates many power and ground connections beneath the device, but package size alone does not establish safe dissipation. Route power and ground planes into the ball field, minimize thermal discontinuities, and provide an uninterrupted top-layer or multilayer copper heat-spreading path where mechanical and assembly rules permit. Estimated: junction rise equals device dissipation multiplied by the effective board thermal resistance; verify that the resulting junction temperature remains below the device limit at the worst ambient and activity condition.
RocketIO links require controlled-impedance routing, appropriate layer transitions, matched reference-clock distribution, and the device's documented termination and bypass arrangements. Do not infer usable throughput from the 1,181 MHz maximum internal clock; serialize and deserialize interfaces, clock relationships, coding constraints, and board losses determine link performance. Run post-route timing and signal-integrity simulations with realistic layer stacks and verify the final design on hardware across required temperature and voltage conditions.
Avoid treating all XC4VFX60 ordering codes as interchangeable without checking the speed suffix, temperature suffix, package code, configuration bitstream, and exact device name. The -10 and -12 variants change the speed-grade index, while I and C identify different temperature classes. A valid replacement still requires an unchanged 672-ball footprint, compatible power behavior, acceptable timing margin, and a configuration file generated for the substituted MPN. Record the final device identity in the design archive and manufacturing BOM.
কমপ্লায়েন্স তথ্য
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. The FFG672 package code is retained as part of the ordering identity, but it must not be treated as a standalone lead-free compliance claim.