উপশ্রেণী

পণ্য (46,000+)

MC1648M - Voltage-Controlled Oscillator | Motorola
MC1648M

MC1648M - Voltage-Controlled Oscillator | Motorola

The Motorola MC1648M is a voltage-controlled oscillator designed for frequency synthesis, modulation, and signal-generation applications. According to the available Motorola MC1648 documentation, the device requires an external parallel tank circuit consisting of an inductor and capacitor; maximum performance is obtained with QL greater than or equal to 100 at the operating frequency. A varactor diode may be placed in the tank circuit to provide a voltage-variable input for voltage-controlled oscillator operation. A voltage-controlled oscillator, or VCO, generates an output signal whose frequency varies with an applied control voltage. The MC1648 belongs to the broader clock and timing IC family, where it provides a tunable oscillator rather than a fixed-frequency clock. Its external tank circuit allows the designer to select inductance and capacitance for the target operating range, while the control voltage provides fine frequency adjustment. This architecture is useful in FM transmitters, frequency synthesizers, clock-generation circuits, and frequency-discriminator systems. The main verified technical characteristics are its external parallel LC-tank requirement and the recommended tank quality factor of QL at least 100 for maximum performance. The device also supports voltage-variable operation when a varactor diode is incorporated into the tank circuit. The supplied search results identify MC1648M as a Motorola voltage-controlled oscillator and associate it with a DIP-style MC1648 package family, but the detailed electrical ratings, frequency limits, supply voltage, output characteristics, pin names, and package dimensions were not included in the verified dataset. For design implementation, the external tank components should be placed close to the oscillator pins and selected for the intended frequency range. Component tolerance, parasitic capacitance, and inductor Q can shift the operating frequency. The control-voltage range and permitted control-voltage slew rate should be verified in the manufacturer datasheet before relying on the part for precision frequency control. Typical uses include FM radio modulation, tone generation, frequency conversion, and tunable clock sources. The MC1648M is most appropriate when an external LC network and application-specific frequency calibration are acceptable. Modern designs may instead choose a higher-integration oscillator when smaller size, digital calibration, or a specified phase-noise performance is required. This page combines the verified Motorola MC1648 tank-circuit requirements, distributor availability information, pricing context, and practical selection guidance. The verified distributor listing shows MC1648M in stock at LCSC with a starting price of $1.0043. Pricing and inventory should be checked with the authorized supplier before purchase, especially because legacy semiconductor availability can vary by package, region, and production status.

RFQ যোগাযোগ
MC3302D - Quad 3-36 V Comparator | onsemi | Analog IC
MC3302D

MC3302D - Quad 3-36 V Comparator | onsemi | Analog IC

onsemi MC3302D is a quad voltage comparator containing four independent precision comparator channels, a 3 V to 36 V single-supply operating range, and an offset voltage specification as low as 2.0 mV maximum per channel. The component is offered in a 14-lead small-outline package for level-detection, low-level-sensing, memory, consumer, automotive, and industrial circuits. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference between them changes sign. The MC3302D belongs to the comparator hierarchy within analog and amplifier ICs, where precise threshold comparison is used to convert an analog condition into a digital decision for control logic, protection circuits, sensing systems, and memory interfaces. Each of the four MC3302D channels is independent, allowing one package to implement four separate threshold decisions. The verified source describes the series as a precision single-supply quad comparator with offset voltage down to 2.0 mV maximum. It also identifies 25 nA typical input bias current and plus or minus 5 nA typical input offset current for the related MC3302DR2G description, useful characteristics when the design must limit input loading or offset-related switching errors. The device supports operation from a 3 V to 36 V supply and can also operate from dual supplies when the supply constraints are satisfied. The cited comparison information states that dual-supply operation is possible when the difference between supplies remains between 2 V and 28 V and VCC is at least 1.5 V more positive than the negative supply. These details make the comparator suitable for both compact low-voltage systems and wider industrial rails. Typical uses include level detection, low-level sensing, memory applications, and consumer, automotive, or industrial electronic equipment. In each case, the four independent channels can monitor separate thresholds without requiring four separate comparator packages, reducing component count while preserving independent decision paths. Designers should verify input common-mode limits, output configuration, propagation delay, input overvoltage behavior, and input/output pin functions against the manufacturer datasheet before finalizing a board. The verified data does not provide a complete pin table or all timing limits, so those parameters should not be inferred from the broader LM139-family description. This page consolidates the verified onsemi product information, distributor pricing and availability, cross-reference candidates, and practical application guidance. It distinguishes confirmed ratings from parameters requiring direct datasheet confirmation, helping engineers evaluate MC3302D without relying on incomplete distributor summaries.

RFQ যোগাযোগ
MC3302DG - 3-36V Quad Comparator | onsemi | 14-SOIC
MC3302DG

MC3302DG - 3-36V Quad Comparator | onsemi | 14-SOIC

onsemi MC3302DG is a single-supply quad comparator IC with four independent comparison channels, a 3 V to 36 V operating range and a 14-SOIC surface-mount package. It is designed for general-purpose level detection, low-level sensing and memory applications, with CMOS, open-collector and TTL-compatible output characteristics. A comparator is an analog integrated circuit that compares an input voltage against a reference voltage and produces a digital logic result. The MC3302DG belongs to the comparator hierarchy within analog mixed-signal ICs, where its four channels provide compact threshold monitoring, signal conditioning and system-level decision logic. Compared with a general-purpose operational amplifier used as a comparator, this device is purpose-built for logic-level output behavior. Key features include four comparators in one package, single-supply operation from 3 V to 36 V, typical low input bias current of 25 nA, typical input offset current of plus or minus 5 nA, and open-collector outputs suitable for CMOS and TTL-compatible interfacing. The commercial temperature range is -40 C to +85 C, making the part suitable for industrial and commercial equipment when its electrical ratings are respected. The low input bias current helps reduce errors in high-impedance sensing circuits, while the low input offset current supports sensing nodes where small current differences determine the comparison result. Its open-collector output architecture gives the designer control over pull-up voltage and can support wired logic, but each output requires an appropriate pull-up arrangement to operate as a conventional logic signal. Typical applications include battery threshold detection, power-supply monitoring, memory-cell sensing, industrial control interfaces, sensor conditioning and general digital threshold logic. The 14-SOIC package offers enough pin spacing for hand assembly and inspection while supporting compact PCB layouts in industrial control, instrumentation and embedded systems. When designing around the MC3302DG, account for the open-collector output, choose suitable pull-up resistors, maintain the input common-mode range across temperature, and verify output-state timing in the complete system. Because several channels share a package, power-supply noise and ground-return paths can affect more than one comparator, so careful decoupling and routing remain important. This product page combines the manufacturer part identity, verified distributor data, package information, application guidance, design notes and documented drop-in alternatives to support faster component selection and PCB-level replacement planning.

RFQ যোগাযোগ
MC3302P - Quad Single-Supply Comparator | onsemi
MC3302P

MC3302P - Quad Single-Supply Comparator | onsemi

The onsemi MC3302P is a quad single-supply comparator with a 14-pin PDIP package. It provides four independent comparator channels for level detection, low-level sensing, memory applications, and other consumer, automotive, and industrial electronics systems. The verified product data identifies a typical input bias current of 25 nA and a typical input offset current of ±5.0 nA, while the specified comparison capability covers ±15 V and 30 V operation. Its through-hole PDIP-14 construction supports legacy industrial and automotive circuit boards that were designed around a quad comparator rather than a newer surface-mount package. A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. The MC3302P belongs to the comparator hierarchy, which also includes voltage comparators and differential amplifiers used in control and signal-conditioning systems. As a single-supply device, it is intended for systems where the comparator must operate from one supply rail while detecting small voltage differences within that rail. The MC3302P's four channels provide practical space savings compared with four discrete comparators. Its typical 25 nA input bias current minimizes loading on high-impedance sensing nodes, while the typical ±5.0 nA input offset current supports accurate threshold decisions near the reference voltage. The device is suited to console, automotive, and industrial applications where level detection and low-level sensing must be implemented with a familiar 14-pin through-hole footprint. Each channel compares an inverting and a non-inverting input and provides an open-collector output, allowing the outputs to be pulled up as required by the host logic and to support wired logic when several outputs are combined. The open-collector architecture provides design flexibility but requires an external pull-up resistor. The output transistor can sink current when the comparator condition is met, while the pull-up establishes the inactive high voltage. Typical uses include battery threshold detection, sensor signal conditioning, window or level comparison, memory-control interfaces, and industrial control modules. Because this is a legacy-style PDIP device, it is especially relevant to maintenance of existing equipment rather than new space-constrained designs. Designers should confirm the exact pinout and output truth table against the manufacturer documentation before modifying an existing board. The principal design consideration is supply bypassing. Place the required decoupling capacitor close to the device supply pins and return each comparator input directly to its pin rather than routing it through shared analog traces. Account for input offset and bias currents when setting very small thresholds, and use a pull-up resistor compatible with the required output rise time and available sink current. This product record combines verified manufacturer and distributor information with package, application, design, and replacement guidance. It also distinguishes exact technical data from values that require confirmation, helping engineers source MC3302P parts without treating unsupported compatibility or price claims as verified facts.

RFQ যোগাযোগ
MC3302PG - 4-Channel 3-36V Comparator | onsemi
MC3302PG

MC3302PG - 4-Channel 3-36V Comparator | onsemi

The onsemi MC3302PG is a four-channel, general-purpose comparator designed for single-supply operation across a 3 V to 36 V input range. It provides CMOS and TTL-compatible open-collector outputs, a 1 mA supply current specification, and a response time of 1.3 microseconds. The device is packaged in a 14-pin PDIP package for through-hole industrial, consumer, and automotive electronics assemblies. A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The MC3302PG belongs to the comparator hierarchy within analog ICs and interface ICs. Its four independent channels allow a single package to perform multiple threshold, level-detection, low-level-sensing, or memory-interface functions while operating from one supply rail. The primary electrical features are the wide 3 V to 36 V operating range, four general-purpose comparator channels, 1.3 microsecond response time, and 1 mA supply current. CMOS and TTL output compatibility allows the open-collector outputs to interface with a broad range of digital logic. The 14-pin PDIP package also supports conventional through-hole assembly and hand prototyping without requiring a fine-pitch surface-mount footprint. Each comparator section is intended to operate from the same single supply, making the IC suitable for systems where a positive supply rail is available but split bipolar rails are not. Open-collector outputs provide a flexible output architecture, while the common-device package simplifies inventory and reduces the number of discrete comparator components required on a board. The 1.3 microsecond response time is appropriate for threshold monitoring and control functions that do not require sub-microsecond timing. Typical uses include level detection, low-level sensing, memory applications, industrial control inputs, consumer equipment, automotive signal interfaces, and digital threshold crossings. The four-channel arrangement is particularly useful when several sensed voltages must be compared against independent references or when redundant comparator decisions are needed within one package. Designers should account for the open-collector output configuration, including pull-up requirements and pull-up resistor selection. Input common-mode range, output saturation behavior, supply-current variation, and input offset must be checked against the manufacturer datasheet for the exact operating condition. Input leads should be routed away from switching nodes and noisy return paths to prevent false comparator transitions. This product page combines the core MC3302PG electrical characteristics, same-footprint replacement options, application guidance, and practical design notes. It is intended to help engineers identify the correct package, confirm logic compatibility, and plan PCB implementation before requesting a quotation for production sourcing.

RFQ যোগাযোগ
MC3303D - Quad 30V 1MHz Op Amp | Texas Instruments
MC3303D

MC3303D - Quad 30V 1MHz Op Amp | Texas Instruments

The Texas Instruments MC3303D is a quad general-purpose operational amplifier designed for single-supply operation, with a 30 V maximum supply rating, approximately 1 MHz unity-gain bandwidth, and a 14-pin SOIC package. The four amplifiers share a common package while providing separate differential input and output connections for independent analog signal conditioning. An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, compare, or reshape analog signals. Quad operational amplifiers combine four amplifier channels in one package, reducing board area and simplifying designs that need multiple analog functions. The MC3303D belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Key verified features include four amplifier circuits, single-ended circuit configuration, a 30 V supply rating for the Texas Instruments MC3303D, and a unity-gain bandwidth of 1 MHz. The onsemi MC3303D listing additionally describes a voltage-feedback architecture, 0.6 V/µs slew rate, nominal 14 V supply, and an operating-temperature range from -40 °C to 85 °C. Because MC3303D is used by more than one manufacturer, engineers should confirm the manufacturer-specific orderable datasheet before release. The MC3303D combines four high-voltage-capable amplifiers in a 14-terminal SOIC-14 package. Its approximately 1 MHz bandwidth is suitable for general-purpose signal processing, including audio-frequency stages, control loops, sensor interfaces, and active filtering. The available verified data does not state input offset voltage, input bias current, noise density, common-mode input range, output swing, or short-circuit current for the Texas Instruments version. Typical uses include four-channel sensor conditioning, low-frequency active filters, instrumentation stages, audio preamplification, comparator-style threshold circuits, and general analog buffers. Because four independent channels are integrated, a design can also use the amplifiers for mixed functions such as gain, filtering, level shifting, and output buffering without using four separate packages. Designers should verify input common-mode range, output swing, input offset, bias current, noise, stability, and compensation requirements against the exact manufacturer datasheet. The verified web results identify different electrical details for the Texas Instruments, onsemi, and STMicroelectronics versions sharing the MC3303D suffix, so package compatibility alone does not prove specification compatibility. This page combines verified manufacturer and distributor information with practical procurement guidance, explicitly identifies unavailable electrical parameters, and distinguishes same-package drop-in candidates from broader functional equivalents. It is intended to support engineering selection without treating devices with identical suffixes from different manufacturers as automatically interchangeable.

RFQ যোগাযোগ
MC3303DG - 4-Channel 1 MHz Op Amp | onsemi | 14-SOIC
MC3303DG

MC3303DG - 4-Channel 1 MHz Op Amp | onsemi | 14-SOIC

The onsemi MC3303DG is a four-channel general-purpose operational amplifier with true differential inputs, 1 MHz gain-bandwidth product, and 0.6 V/us slew rate, housed in a 14-pin SOIC package. Designed for single-supply operation from 3 V to 36 V, the device also supports split-supply operation, making it suitable for industrial control, instrumentation, sensor conditioning, and general analog signal-processing systems. Each amplifier includes internal frequency compensation, low input bias current, and short-circuit protection, allowing stable operation without external compensation networks in typical closed-loop configurations. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. In the product taxonomy, the MC3303DG belongs to the operational-amplifier and instrumentation-amplifier hierarchy, then to the broader amplifier IC and semiconductor categories. Its internally compensated architecture simplifies design by fixing the gain-bandwidth relationship while preserving a practical combination of supply flexibility, low power consumption, and general-purpose functionality. The principal electrical features include four independent amplifiers, 1 MHz gain-bandwidth product, 0.6 V/us slew rate, and 8 mV input offset voltage as listed for the industrial-temperature version. The device operates from 3 V to 36 V under a single supply, while dual-supply operation remains possible when the total supply span is adequate. A class AB output stage supports practical drive into typical feedback networks, and true differential inputs help reject common-mode signals when both inputs are biased within the common-mode range. The MC3303 architecture is intended as a cost-conscious alternative to the uA741-class quad amplifier while adding advantages for modern single-supply systems. Internal frequency compensation removes the need for a dominant-pole compensation capacitor in most closed-loop applications. Designers must still account for output swing, input common-mode range, bias current, noise, stability, and supply bypassing when using the amplifier in precision or high-frequency circuits. Typical applications include industrial control loops, transducer and sensor signal conditioning, audio preamplification, analog measurement front ends, power-supply feedback networks, and low-frequency communications equipment. Four amplifiers in one package can reduce board area in designs requiring multiple independent analog channels, although common supply routing and decoupling remain critical. The most important design practice is to place input, output, and bypass connections for short, low-impedance paths while keeping sensitive input traces away from power outputs and switching nodes. Verify the exact input and output voltage limits, bias-current behavior, load capability, and noise specifications against the manufacturer datasheet before finalizing a precision application. This page consolidates verified distributor information, package-specific alternatives, technical comparisons, and practical design guidance for engineers evaluating the MC3303DG. It emphasizes what is confirmed from supplied sources and explicitly marks unavailable electrical details rather than estimating them, supporting more reliable procurement and design decisions.

RFQ যোগাযোগ
MC3303DG4 - Quad 30V 1MHz Op Amp | Texas Instruments
MC3303DG4

MC3303DG4 - Quad 30V 1MHz Op Amp | Texas Instruments

The Texas Instruments MC3303DG4 is a quad, general-purpose operational amplifier optimized for low-power operation, with a 1 MHz gain-bandwidth product and operation from a single 3 V to 36 V supply or suitable split supplies. The device is packaged in a 14-pin SOIC measuring 3.90 mm wide and is supplied in a tube. Its four amplifiers make it suitable for signal conditioning, instrumentation, audio, industrial control, and general analog signal-processing systems. An operational amplifier is a high-gain, high-impedance differential amplifier used to amplify weak signals, buffer inputs, perform active filtering, compare voltages, or drive analog stages. The MC3303 belongs to the broader operational-amplifier hierarchy, combining four independent amplifiers in one integrated circuit to reduce board area and simplify multi-channel designs. Compared with a discrete single amplifier, the quad device provides matched circuitry within one package and a common supply connection. The MC3303's headline characteristics are four integrated amplifier channels, a 1 MHz gain-bandwidth product, and a 30 V maximum supply-related operating rating in the ordered configuration. The manufacturer identifies it as a low-power amplifier, making it suitable for general-purpose designs that do not require the bandwidth of a modern high-speed amplifier. Its 14-SOIC package supports conventional surface-mount assembly, while the exposed thermal approach is not required because the package does not use a bottom thermal pad. The product family is described as a quadruple low-power operational amplifier with performance comparable to the uA741 while adding the ability to operate from a single supply over a 3 V to 36 V range. Split-supply operation is also possible when the total voltage between the supply rails remains acceptable. These characteristics make the amplifier applicable to both legacy 24 V industrial systems and lower-voltage circuitry. Typical uses include four-channel sensor conditioning, low-frequency active filters, audio preamplification, comparator-style threshold circuits, current-to-voltage conversion, and general instrumentation. One package can provide independent gain stages for multiple sensor channels, provided each amplifier is configured with stable feedback compensation and the supply rails meet the required limits. Designers should review the complete manufacturer pin description and typical application circuit before assigning PCB tracks. Decoupling capacitors should be placed close to the supply pins, input and feedback components should be kept compact, and unused amplifier channels should be configured according to the recommended stable-input method rather than left floating. This product record combines device status, package details, lifecycle information, sourcing guidance, compatible-family analysis, and practical PCB considerations into a focused engineering reference for designing around the MC3303DG4.

RFQ যোগাযোগ
MC3303DR - Quad 30V 1MHz Operational Amplifier | Texas Instruments
MC3303DR

MC3303DR - Quad 30V 1MHz Operational Amplifier | Texas Instruments

The Texas Instruments MC3303DR is a quad, 30-V, 1-MHz operational amplifier packaged in a 14-pin SOIC (D). The device combines four amplifiers on one die, supports single-supply operation from 3 V to 36 V, and includes a class AB output stage, true differential inputs, internal frequency compensation, and short-circuit protection. Its four-amplifier arrangement reduces board area in instrumentation, buffering, and general-purpose analog signal-processing circuits. An operational amplifier, or op amp, is a high-gain differential amplifier that uses feedback to control gain, impedance, bandwidth, and output behavior. The MC3303 belongs to the general-purpose amplifier hierarchy: operational amplifier, voltage-feedback amplifier, analog amplifier, and integrated circuit. Its low-power quad configuration is intended for cost-sensitive designs requiring several independent amplifier channels on a compact PCB footprint. The primary performance characteristics include a 1-MHz gain-bandwidth product, a 30-V maximum operating rating in the product designation, and operation from a 3-V to 36-V single supply. Split-supply operation is also possible when the total supply range is respected. A class AB output stage supports linear operation, while true differential inputs provide the conventional non-inverting and inverting input arrangement expected by general-purpose amplifier designs. Internal frequency compensation removes the need for an external dominant compensation capacitor in ordinary closed-loop applications. Short-circuit protection improves robustness when an output is driven into a low-impedance load. These features simplify implementation, but the amplifier still requires careful common-mode, output-swing, stability, and supply-decoupling analysis for each specific circuit. Typical uses include four-channel sensor conditioning, instrumentation buffering, low-frequency active filtering, general signal amplification, and industrial control interfaces. The MC3303DR is particularly appropriate when a quad low-power package, wide single-supply range, and moderate 1-MHz bandwidth are more important than rail-to-rail input or output operation. During PCB design, place input, output, and supply bypass components close to their associated pins. Keep sensitive input traces away from switching nodes and high-current return paths. Verify output-voltage headroom, common-mode range, load stability, and power dissipation across temperature before treating the nominal supply limits as usable design limits. This product data combines manufacturer information, package and lifecycle details, practical design guidance, and same-footprint replacement options. It also identifies the electrical checks engineers should perform before replacing the MC3303DR in an existing instrumentation or control design.

RFQ যোগাযোগ
MC3303DR2 - Quad 3-36V Low-Noise Op Amp | onsemi
MC3303DR2

MC3303DR2 - Quad 3-36V Low-Noise Op Amp | onsemi

onsemi MC3303DR2 is a single-supply, general-purpose quad operational amplifier with four amplifier circuits in a 14-pin SOIC package. Its 3 V to 36 V operating supply range and 8 mV differential input offset voltage make it suitable for industrial instrumentation, low-level signal conditioning, sensor interfaces, and general analog control systems. The device is designed as a low-noise alternative for applications requiring four amplifiers in one package. An operational amplifier is an active analog component that compares two input voltages and amplifies their difference. A quad operational amplifier combines four amplifiers in one integrated circuit, reducing component count and simplifying PCB layout compared with four separate single amplifiers. This MC3303 device belongs to the operational-amplifier hierarchy: quad op amp, instrumentation amplifier stage, analog signal-conditioning IC, and semiconductor. The MC3303DR2 provides four independent general-purpose amplifier channels, a 3 V to 36 V single-supply operating range, and an 8 mV differential input offset voltage rating. Its low-noise characterization makes it relevant to sensor signals, current-loop interfaces, transducer conditioning, and low-level control paths where the signal must be amplified without adding excessive circuit noise. Operation from a single supply simplifies power-system design because the amplifier can operate with a positive supply and ground reference without requiring a symmetrical positive and negative rail. Designers must still observe the common-mode input range and output swing limitations of each amplifier channel. Decoupling close to the supply pins helps control supply ripple, while resistor selection and input-bias-current compensation determine practical DC offset behavior. Typical applications include industrial sensor conditioning, four-channel process monitoring, general-purpose buffer stages, transimpedance front ends, active filtering, audio and communication interfaces, and control-loop amplifiers. Using four channels in one package can also reduce board area, although each channel still requires its own feedback network and output-load assessment. The principal design consideration is ensuring that signal amplitudes remain within the amplifier's input common-mode range and output voltage swing across the complete 3 V to 36 V supply range. Check the manufacturer datasheet for the exact common-mode range, output-swing limits, input-bias current, slew rate, and stability requirements before finalizing high-gain or capacitive-load layouts. This product page combines the exact MC3303DR2 identification, package information, electrical characteristics, drop-in alternatives, application guidance, and design checks needed for engineering evaluation. It also distinguishes verified drop-in candidates from options that require a separate pinout, electrical, and qualification review before use in a production design.

RFQ যোগাযোগ
MC3303DT - 1MHz Low-Power Quad Op Amp | STMicroelectronics
MC3303DT

MC3303DT - 1MHz Low-Power Quad Op Amp | STMicroelectronics

STMicroelectronics MC3303DT is a low-power, quad bipolar operational amplifier featuring four amplifiers, true differential inputs, internally compensated operation, and a 1 MHz gain-bandwidth product. The device operates from single +3 V to +36 V supplies or from dual ±18 V supplies and is packaged in a 14-pin SOIC. Each amplifier is designed for general-purpose signal conditioning using its Class AB output stage and short-circuit-protected outputs. An operational amplifier is a voltage-gain element that compares its inverting and non-inverting inputs and drives its output toward a voltage representing the difference between them. The quad configuration belongs to the operational-amplifier family within analog integrated circuits and amplifier ICs. MC3303DT provides four independent amplifiers in one package, reducing board area compared with four single or dual amplifier packages when a system requires four similar signal-processing channels. The principal features include a 1 MHz gain-bandwidth product, operation from 3 V to 36 V, low input bias current of 500 nA maximum, internal frequency compensation, and short-circuit-protected outputs. Its Class AB output stage is intended to provide a practical compromise between output drive capability and power dissipation compared with a pure Class A stage. The low-power operating point makes the device suitable for industrial control, instrumentation, sensor interfaces, and general analog signal-conditioning systems. MC3303DT differs from the closely related UA741-family architecture through its improved suitability for single-supply operation. It accepts a positive supply as high as 36 V or dual supplies of ±18 V, allowing operation from industrial 24 V rails when the total supply and input/output signal limits are observed. Internally compensated amplifiers simplify closed-loop gain selections when unity-gain stability is appropriate for the selected circuit and load. Typical uses include four-channel sensor amplification, differential input conditioning, active filtering, comparator-style threshold functions, and general instrumentation. The four amplifiers may also process separate channels or be combined in wider-bandwidth or higher-gain configurations where the resulting feedback network remains stable. Designers should account for input common-mode range, output swing, noise, and load capability at their intended supply voltage. A key design consideration is power: each amplifier contributes to total quiescent current, so four channels require more supply current than one or two channels. Input and output stability should be verified with the intended source impedance, load, supply decoupling, and feedback network. Input and output pin functions are published in the manufacturer datasheet, which should be checked against the final 14-pin PCB footprint. This page combines verified distributor data, manufacturer-document references, application guidance, package details, and same-footprint replacement considerations. It also identifies where current sourcing information remains unavailable so engineers can distinguish documented facts from data requiring confirmation before production release.

RFQ যোগাযোগ
MC3303N - Quad 30V 1MHz Op Amp | Texas Instruments
MC3303N

MC3303N - Quad 30V 1MHz Op Amp | Texas Instruments

The Texas Instruments MC3303N is a quad, low-power bipolar operational amplifier specified for a 30 V maximum supply and 1 MHz unity-gain bandwidth, housed in a 14-pin PDIP package. It provides four amplifiers in one package for general-purpose signal conditioning, transducer interfaces, analog summing, filtering, and feedback-control circuits. An operational amplifier is a voltage-amplified differential-input device whose external feedback network determines its behavior. MC3303 belongs to the operational-amplifier hierarchy: quad low-power op amp, bipolar linear amplifier, analog signal-conditioning IC, and semiconductor. Four independent amplifiers in one 14-pin package reduce board area compared with four separate single or dual amplifier packages, although users must preserve adequate spacing and decoupling for stable low-noise operation. Verified manufacturer information identifies the MC3303N as a standard general-purpose four-circuit amplifier in a 14-pin PDIP package, with a 30 V supply rating and 1 MHz gain-bandwidth product. The family is intended for single-supply or split-supply operation when the electrical limits specified by the manufacturer are met. Because the target uses a through-hole PDIP package, it also supports prototype repair and conventional leaded-board assembly rather than requiring a fine-pitch SMT footprint. The integrated amplifier count makes the device useful when a board needs multiple similar signal paths. Typical uses include four sensor channels, four analog-control loops, dual-channel buffering with spare amplifier capacity, or small active-filter sections. Designers should check common-mode range, output swing, input bias behavior, supply current, noise, slew rate, stability, and temperature limits against the manufacturer datasheet before fixing the operating conditions. The MC3303N should be placed near the supported decoupling network, with power and ground return paths arranged to minimize resistance and switching noise. Input and feedback components should be positioned to reduce parasitic capacitance at the high-frequency nodes. Do not infer exact bias-current, noise, slew-rate, common-mode, or temperature values from the search summaries; those parameters require the official manufacturer datasheet before release to production. This page combines verified product identity, source links, package information, application guidance, and explicitly marked data gaps. The comparison section is limited to candidates that the provided evidence supports as MC3303N equivalents; any claimed drop-in substitution must still be checked against pin assignment, electrical limits, supply requirements, and the intended operating conditions.

RFQ যোগাযোগ
MC3303PG - Quad 1 MHz Operational Amplifier | onsemi | 14-PDIP
MC3303PG

MC3303PG - Quad 1 MHz Operational Amplifier | onsemi | 14-PDIP

The onsemi MC3303PG is a four-channel general-purpose operational amplifier designed for single-supply operation, with a 3 V to 36 V supply range, true differential inputs, internal frequency compensation, and short-circuit protection. The device is packaged in a 14-pin through-hole DIP and is intended for low-cost analog signal conditioning, instrumentation, and general-purpose amplifier applications. Its unity-gain bandwidth is 1 MHz, while the specified minimum common-mode rejection ratio is 70 dB and the listed input offset voltage is 10 mV. An operational amplifier is an analog building block that compares two input voltages and amplifies their difference. The quad MC3303PG contains four amplifier sections in one package, allowing a circuit to perform multiple amplification, buffering, summing, or comparison functions while reducing board area. MC3303PG belongs to the operational-amplifier hierarchy within analog ICs and integrated circuits, and its true differential input architecture supports accurate sensing of small signals referenced to either ground or another bias point. The principal features include four amplifier channels, a 1 MHz gain-bandwidth product, operation from a single positive supply, Class AB output stages, true differential inputs, and low input bias current. Internal frequency compensation removes the need for external compensation networks in unity-gain applications. These characteristics make the MC3303PG practical for general-purpose designs where simplicity, tolerance of a wide supply range, and moderate operating bandwidth are more important than rail-to-rail output swing or very low offset voltage. MC3303PG is electrically similar to the widely used MC1741C-family architecture but adds advantages for single-supply operation. True differential inputs allow the amplifier to operate without artificial ground bias around the input signal. The four-channel arrangement supports signal amplifiers, active filters, transducers, sensor interfaces, audio preamplification, and industrial control modules. A wide 3 V to 36 V operating range also permits operation from both compact low-voltage systems and higher industrial supply rails. Typical uses include low-frequency sensor conditioning, audio input stages, active-filter sections, comparator-style threshold circuits, and general instrumentation. Because the amplifier is not rail-to-rail, input and output common-mode limits must be respected in low-voltage designs. For battery-powered equipment, verify input bias current and supply-current requirements against the system power budget. The DIP package also requires adequate through-hole spacing and mechanical clearance from adjacent heat-producing components. When designing around MC3303PG, begin with the manufacturer pin-description and electrical-characteristics tables, especially for input common-mode range, output swing, supply current, and stability. Place bypass capacitors close to the supply pins and route feedback components to minimize parasitic capacitance. Avoid operating the output near either supply rail unless the selected output-load condition remains within the specified swing range. This product page consolidates the manufacturer product information, distributor identification, package details, and practical engineering guidance for the MC3303PG. It also distinguishes the verified 14-pin DIP replacement candidates from broader functional equivalents so that PCB-level drop-in decisions are made with package and parameter checks rather than by device category alone.

RFQ যোগাযোগ
MC3303PT - Quad 1 MHz Low-Power Op Amp | STMicroelectronics
MC3303PT

MC3303PT - Quad 1 MHz Low-Power Op Amp | STMicroelectronics

The STMicroelectronics MC3303PT is a four-circuit, low-power bipolar operational amplifier with a 1 MHz gain-bandwidth product, a maximum supply voltage of 36 V, and a 14-pin TSSOP package. It is designed for general-purpose instrumentation, buffer, and amplifier applications that require four amplifiers in one package. The integrated quad arrangement reduces component count and simplifies PCB layout compared with four individual single amplifiers. An operational amplifier is a voltage-amplifying semiconductor in the amplifier IC category. It compares an input voltage with a feedback-defined reference voltage and drives its output to reduce the difference between them. The MC3303PT belongs to the broader low-power operational-amplifier family and provides four internally compensated amplifiers with true differential inputs in one package. The MC3303PT supports single-supply operation up to 36 V and dual-supply operation up to ±18 V. Its maximum input-bias current is 500 nA, which helps limit the current required from high-impedance signal sources. The device also provides short-circuit-protected outputs, an internally compensated Class AB output stage, and electrical characteristics described as similar to the widely used UA741. Each amplifier channel is internally compensated, allowing operation as a closed-loop amplifier without external compensation components. The Class AB output stage is intended to provide low crossover distortion while avoiding the continuous conduction characteristic of a purely class A output stage. The quad package is useful when four channels can share the same supply rails and ground reference. Typical applications include low-frequency instrumentation amplifiers, signal buffers, active filters, transducer interfaces, sensor signal conditioning, and general analog signal-processing chains. The 1 MHz gain-bandwidth product is suitable for moderate-bandwidth closed-loop stages rather than high-speed video or RF amplification. For new designs, verify the input common-mode range, output swing, input-offset voltage, input-bias current, and output-current capability in the manufacturer datasheet against the actual signal range. Decoupling capacitors should be placed close to the supply pins, and each unused amplifier channel should be configured according to the manufacturer's recommended stable-input arrangement rather than left floating. This product page organizes the confirmed MC3303PT characteristics, package information, application guidance, and sourcing path into an engineering-focused reference. It also distinguishes verified device attributes from parameters that require confirmation from the complete manufacturer datasheet before layout, simulation, or production release.

RFQ যোগাযোগ
MC3303PW - 30V 1MHz Quad Op Amp | Texas Instruments
MC3303PW

MC3303PW - 30V 1MHz Quad Op Amp | Texas Instruments

The Texas Instruments MC3303PW is a quad, general-purpose operational amplifier with a 30 V maximum supply rating, 1 MHz gain-bandwidth product, and four amplifiers in a 14-pin TSSOP package. It operates from single or dual supplies across a 3 V to 36 V total supply range, making it suitable for industrial control, instrumentation, sensor conditioning, and audio signal-chain designs. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The MC3303 belongs to the linear amplifier hierarchy, where four independent amplifiers share one package. Each channel combines a true differential input stage, a Class AB output stage, internal frequency compensation, and short-circuit protection. These features simplify circuit design because external compensation networks are not required for typical closed-loop amplifier configurations. The MC3303's principal operating characteristics include a 1 MHz gain-bandwidth product, support for supply voltages from 3 V to 36 V, and an operating temperature range from -40 °C to 85 °C. Its low-power design is intended for general-purpose analog systems where four amplifier channels, compact packaging, and flexible supply operation are more important than rail-to-rail input or output capability. Input common-mode and output swing limits must be checked against the actual supply voltage before the circuit is finalized. The true differential input stage supports common-mode input operation while reducing output offset resulting from common input signals. A Class AB output stage supports bidirectional output current without the crossover distortion associated with complementary Class B stages. Internal frequency compensation makes the device convenient for unity-gain voltage followers, amplifiers, comparators, and basic active-filter blocks, although the stable operating range and output-drive requirements depend on the selected closed-loop gain. Typical uses include four-channel sensor amplification, industrial transducer interfaces, low-frequency audio mixing, buffered instrumentation, active filtering, and general voltage amplification. The 14-pin TSSOP package reduces board area compared with a larger through-hole package, while its exposed thermal behavior and power dissipation should be considered when all four channels operate continuously at high output voltage and current. For stable operation, place input and feedback components close to the relevant pins, route return currents directly to the ground connection, and avoid long high-impedance traces near the amplifier inputs. Use the manufacturer pin-description table to assign the four amplifier sections and power pins. Check input range, output swing, load current, supply headroom, and thermal rise together. This page also organizes pin compatibility, selection trade-offs, application guidance, and design checks into one engineering-focused reference.

RFQ যোগাযোগ
MC33071D - 44V Single-Supply Op Amp, 4.5MHz GBW | onsemi
MC33071D

MC33071D - 44V Single-Supply Op Amp, 4.5MHz GBW | onsemi

The onsemi MC33071D is a single-supply operational amplifier with a 3.0 V to 44 V operating supply range, a 4.5 MHz gain-bandwidth product and a 13 V/µs slew rate, housed in an 8-pin SOIC-8 surface-mount package. It is a single amplifier in the MC33071/72/74 and MC34071/72/74 family, so a dual or quad version is available when more channels are needed on the same board. An operational amplifier, or op amp, is a high-gain differential amplifier whose inverting and non-inverting inputs are compared and whose output is driven to correct the difference between them. In the product-type hierarchy, an op amp belongs to the amplifier IC class, then to analog integrated circuits, then to the wider semiconductor family. Because the MC33071D is built on quality bipolar fabrication with innovative design concepts rather than JFET input devices, it combines wide signal swing capability with fast settling behavior over an unusually wide supply range. Key features of this device include the wide 3.0 V to 44 V single-supply capability, 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, and low input offset voltage of 3 mV typical (5 mV maximum per the distributor listing). The amplifier operates from a -40 °C to +85 °C ambient temperature range and is specified for standard (general-purpose) instrumentation, buffer and op-amp applications. Technically, the MC33071D combines a wide internal common-mode and output voltage range with bipolar input and output stages, which allows the output to swing close to the supply rails on low-supply designs while still tolerating industrial rails well above 44 V in feedback loops and sensing stages. The 4.5 MHz bandwidth combined with 13 V/µs slew rate means a 10 V output step settles in roughly a microsecond, fast enough for closed-loop control loops at audio and low-frequency instrumentation bandwidths. Typical uses include industrial sensor signal conditioning, precision current-sense and voltage-feedback networks in power supplies, low-frequency audio driver stages, transducer and bridge preamplifiers, and general-purpose buffering where the supply rail can exceed the 18 V limit of typical 5 V single-supply op amps. When designing with this part, remember that the wide supply rating is a maximum, not a target. Keep input and output common-mode voltages inside the linear input range, place a 0.1 µF ceramic bypass capacitor at each supply pin with additional bulk capacitance nearby, and check output swing headroom at the highest ambient temperature. This page consolidates supply-range, bandwidth, slew-rate and offset specifications together with drop-in alternatives and practical layout guidance, so you can select the amplifier and the surrounding passive network without rebuilding the design from scratch.

RFQ যোগাযোগ
MC33071P - 3-44V Single Operational Amplifier | onsemi
MC33071P

MC33071P - 3-44V Single Operational Amplifier | onsemi

The onsemi MC33071P is a single general-purpose operational amplifier designed for single-supply operation from 3.0 V to 44 V. It provides a maximum input offset voltage of 5 mV, a gain-bandwidth product of 4.5 MHz, and supply current of 1.9 mA in an 8-pin PDIP package. The device is suited to industrial instrumentation, sensor conditioning, power-control loops, and signal-processing systems requiring wide supply-voltage tolerance. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The MC33071 belongs to the precision operational-amplifier hierarchy, combining a wide common-mode input range, single-supply operation, and general-purpose signal handling in one package. Its ability to operate from a 3.0 V supply supports modern low-voltage systems, while the 44 V upper limit accommodates higher-voltage industrial rails. Key electrical characteristics include a 5 mV maximum input offset voltage and a 4.5 MHz gain-bandwidth product. These specifications make the amplifier useful for low-level AC signal paths where input offset can influence accuracy and where bandwidth determines the range of signals that can be amplified without excessive gain reduction. The 1.9 mA supply current supports power-conscious designs while retaining useful operating speed. The MC33071P uses a conventional bipolar operational-amplifier architecture. In a typical non-inverting configuration, the input signal is applied to the non-inverting terminal and feedback is returned to the inverting terminal. Its broad supply range allows operation from unregulated or industrial supply sources, although input common-mode and output-swing limits must be respected at each supply voltage. Typical uses include low-level sensor amplification, transducer buffering, industrial control loops, audio preamplification, and general analog signal conditioning. It can also form active filters and waveform-shaping circuits when the required gain and bandwidth remain within the device's operating limits. Bypass capacitors placed close to the supply pins help reduce noise and stabilize operation in practical layouts. The primary design trade-off is that a general-purpose bipolar amplifier does not provide the very low offset, low power, or rail-to-rail output performance of specialized modern amplifier families. Confirm common-mode range, output swing, input bias current, and stability requirements against the actual supply voltage before using it in precision or battery-powered systems. This product record combines the MC33071P electrical characteristics, package information, verified drop-in candidates, application guidance, and PCB design considerations. The comparison and selection material helps engineers distinguish same-family and cross-brand options without overlooking differences in supply range, bandwidth, offset voltage, or package.

RFQ যোগাযোগ
MC33071PG - 4.5 MHz, 13 V/us Single-Supply Op Amp | onsemi
MC33071PG

MC33071PG - 4.5 MHz, 13 V/us Single-Supply Op Amp | onsemi

The onsemi MC33071PG is a general-purpose, single-circuit operational amplifier with a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and single-supply operation from 3.0 V to 44 V. The device is packaged in an 8-pin through-hole DIP measuring 0.300 inch, or 7.62 mm, in pitch. An operational amplifier is a voltage-feedback analog IC that uses differential input voltage to produce an amplified output voltage. The MC33071 belongs to the broader single-amplifier, general-purpose amplifier hierarchy, where it combines high bandwidth and rapid slew rate with the ability to operate from a positive supply without a negative rail. This makes it useful for industrial signal conditioning, control, and instrumentation circuits. The main performance characteristics are a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and 1.9 mA supply current. Its high slew rate allows the output to track large-amplitude input changes quickly, while the 4.5 MHz bandwidth supports higher-frequency closed-loop operation than ordinary low-frequency general-purpose amplifiers. The single-supply range permits direct use in 3.0 V to 44 V systems. The MC33071 uses quality bipolar fabrication and a bipolar monolithic operational-amplifier architecture rather than JFET input technology. According to the onsemi product page, the family provides fast settling performance and broad supply-voltage operation. Its single-ended output and single-amplifier configuration simplify designs that require one independent signal-conditioning channel per package. Typical applications include industrial process-control loops, sensor-signal conditioning, low-level instrumentation, motor-feedback amplifiers, and general analog signal processing. The wide supply range is particularly useful in industrial equipment where intermediate rails may be present. In battery-powered systems, the 3.0 V lower limit supports low-voltage operation, although supply current should be included in the overall power budget. For stable operation, follow the manufacturer datasheet when selecting external bias resistors, feedback components, and supply-decoupling capacitors. The input common-mode range and output swing depend on the supply voltage, so verify the operating-point requirements of the target circuit. A low-noise bypass capacitor placed close to the supply pins can reduce ripple coupled into the amplifier output. This product page combines the MC33071PG operating limits, package details, verified drop-in candidates, and application-specific design guidance to help engineers evaluate the amplifier before completing a PCB design.

RFQ যোগাযোগ
MC33072PG - Dual 44V 4.5MHz Op Amp | onsemi
MC33072PG

MC33072PG - Dual 44V 4.5MHz Op Amp | onsemi

The onsemi MC33072PG is a dual general-purpose operational amplifier with a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate, supplied in an 8-pin PDIP package. The device provides two amplifiers in one package and supports both split-supply and single-supply operation, making it suitable for industrial analog signal chains. An operational amplifier is an analog building block that provides high open-loop gain and uses negative feedback to amplify or process signals. The MC33072 belongs to the hierarchy of operational amplifier, voltage-feedback amplifier, analog signal-processing IC, and semiconductor. Its bipolar construction avoids JFET input devices while providing a practical combination of bandwidth, slew rate, input characteristics, and supply flexibility. The two amplifier sections offer 5 mV input offset voltage and a nominal 97 dB common-mode rejection ratio. Their 4.5 MHz gain-bandwidth product supports signal bandwidth beyond audio fundamentals, while the 13 V/us slew rate allows relatively rapid transitions. A 3.0 V to 44 V operating range accommodates conventional ±15 V supplies, lower-voltage asymmetric rails, and higher industrial supply arrangements when the circuit and output limits permit. The MC33072 series uses quality bipolar fabrication and monolithic construction. Each channel can operate as an inverting amplifier, non-inverting amplifier, voltage follower, comparator, or general feedback stage when suitable output swing and stability conditions are respected. Because it is a dual amplifier, both channels share the package supply pins and ground connection, allowing two related signal operations to be implemented in one component. Typical uses include industrial sensor conditioning, current-loop receivers, audio preamplification, active filters, waveform shaping, and general instrumentation. The 13 V/us slew rate is beneficial for low-amplitude, higher-frequency signals, while the 5 mV offset specification supports accurate closed-loop operation around a stable reference. Its single-supply capability is useful in portable and embedded equipment where generating a negative rail would otherwise add cost and complexity. Design the circuit around the manufacturer's recommended operating region and ensure the input common-mode range and output swing remain valid at the selected supply voltage. Keep feedback-loop compensation stable, place decoupling capacitors close to the supply pins, and route high-impedance input nodes with short traces and suitable guarding. The 8-pin PDIP package is intended for through-hole assembly and thermal evaluation on the board rather than compact surface-mount designs. This page combines the manufacturer's MC33072 product information with package characteristics, drop-in alternatives, application guidance, and practical circuit-design notes. It is intended to accelerate component selection while preserving the need to verify operating limits, external circuitry, and PCB-specific requirements before production release.

RFQ যোগাযোগ
MC33074AP - 44V Quad Op Amp, 4.5MHz, 14-DIP | onsemi
MC33074AP

MC33074AP - 44V Quad Op Amp, 4.5MHz, 14-DIP | onsemi

onsemi MC33074AP is a quad general-purpose operational amplifier with four single-ended amplifiers in a 14-pin plastic DIP package. It supports single-supply operation from 3.0V to 44V and provides 4.5MHz gain-bandwidth product, 13V/us slew rate, and 3mV input offset voltage. The four amplifiers are designed for broad industrial, instrumentation, signal-conditioning, and control applications requiring economical precision. An operational amplifier, or op amp, is a high-gain differential amplifier whose open-loop behavior is shaped by external feedback. The MC33074AP belongs to the bipolar operational-amplifier family within the broader amplifier IC and analog semiconductor hierarchy. Each of its four channels can operate from a common positive supply and ground while supporting applications that involve signal amplification, buffering, comparisons, summing, and feedback-controlled analog circuits. The MC33074AP combines a 4.5MHz gain-bandwidth product with a 13V/us slew rate, allowing useful bandwidth beyond audio frequencies and rapid output transitions in transient signals. Its 3mV input offset voltage provides a defined level of input imbalance that must be included in precision-chain error budgets. The 3.0V to 44V supply range covers low-voltage circuits, conventional ±15V industrial systems, and higher single-supply rails. The monolithic quad construction reduces the number of separate amplifier packages required on a board. The bipolar internal design avoids the input-bias-current behavior associated with JFET-input amplifiers. This makes the MC33074AP appropriate for general-purpose signal conditioning where input bias current, offset voltage, slew rate, and supply range are the principal selection criteria. Because four amplifiers share one package, thermal behavior, supply decoupling, unused-channel handling, and channel-to-channel matching should be considered together rather than treating each section as an isolated component. Typical uses include industrial sensor interfaces, low-level control-signal amplification, audio preamplification, active filtering, waveform conditioning, and four-channel monitoring systems. The 44V maximum supply also provides headroom for systems with elevated rail voltages, although the complete circuit must remain within the absolute maximum ratings of every connected device. Grounded-source sensors, transducers, and analog front ends can benefit from the channel count and common package organization. For a new design, confirm the 14-pin DIP footprint and verify every pin function against the manufacturer pin-description table before layout release. Place the power-supply bypass capacitor close to the supply pin, provide a stable ground reference, and avoid leaving unused op-amp inputs floating. Confirm output swing, common-mode range, stability with the intended feedback network, and required noise performance at the actual supply voltage and signal frequency. This product page combines the manufacturer device information with practical supply, layout, comparison, and selection guidance. It also distinguishes exact package compatibility from merely similar amplifier functions, helping engineers identify replacements that can be considered for a PCB-level substitution and those that require a broader redesign.

RFQ যোগাযোগ
MC33074PG - Quad 4.5MHz 44V Op Amp | onsemi
MC33074PG

MC33074PG - Quad 4.5MHz 44V Op Amp | onsemi

onsemi MC33074PG is a general-purpose quad operational amplifier with four single-ended amplifier circuits, a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate. The device is packaged in a 14-pin PDIP package measuring 0.300 inch, or 7.62 mm, in pitch. An operational amplifier is an analog signal-conditioning device that uses high open-loop gain to amplify voltage differences between its inputs. The MC33074 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. It is designed for general-purpose instrumentation, signal conditioning, and feedback-control circuits that can operate from a single supply or split supply. Its common-mode range includes ground potential, which is especially useful in circuits powered from one battery or one low-voltage rail. The MC33074PG combines 4.5 MHz gain-bandwidth product with a 13 V/µs slew rate, allowing it to process small signals while responding to moderate-amplitude changes without JFET input transistors. The quad configuration places four amplifiers in one 14-pin PDIP package, reducing component count and board space. A 5 mV input offset-voltage figure supports applications requiring repeatable DC amplification and active filtering. The 3.0 V to 44 V supply range accommodates conventional industrial and instrumentation voltage rails. The bipolar implementation supports operation from split supplies as well as single-supply configurations. This flexibility is useful when a circuit must process signals centered near ground or interface with sensors whose output spans a positive rail. Because the amplifiers share a common package, each channel can perform a different task, such as input amplification, filtering, buffering, error amplification, or output-current-voltage conversion. Typical uses include low-frequency instrumentation amplifiers, active filters, transducers, sensor-conditioning modules, audio preamplifiers, power-supply control loops, and general industrial control systems. The 4.5 MHz bandwidth is suitable for moderate-frequency precision signal paths, while the 13 V/µs slew rate provides useful transient response for comparator-like and feedback-control tasks. System designers should still verify output swing, output-current capability, input-bias-current effects, and stability for the selected gain and load. For a stable PCB implementation, use the 14-pin PDIP footprint, provide adequate supply bypassing, and route sensitive input and feedback traces away from high-current outputs. Decoupling capacitors should be placed close to the supply pins. Confirm the common-mode and output-swing limits against the actual circuit rails, especially in single-supply designs where the output may not swing fully to either supply rail. This product record combines the MC33074 family electrical characteristics, package information, sourcing guidance, verified drop-in options, and practical design notes. It helps engineers identify the correct quad bipolar amplifier, evaluate replacement choices, and plan instrumentation and industrial signal-conditioning layouts around the same 14-pin PDIP footprint.

RFQ যোগাযোগ
MC33077P - 37 MHz Low-Noise Dual Op Amp | onsemi
MC33077P

MC33077P - 37 MHz Low-Noise Dual Op Amp | onsemi

The onsemi MC33077P is a dual, general-purpose operational amplifier built with precision bipolar design techniques, providing a 37 MHz gain-bandwidth product and an 11 V/µs slew rate in an 8-pin PDIP package. It is intended for instrumentation, signal-conditioning, and amplification applications that require low noise, high frequency response, and precise channel matching. An operational amplifier, or op amp, is an analog active device that amplifies the difference between two input voltages. The MC33077P contains two independent amplifier circuits in one monolithic package, making it a dual op amp. Within the product hierarchy, it belongs to the operational amplifier and analog amplifier categories, where it provides a higher-speed alternative to general-purpose precision amplifiers. The MC33077 family uses innovative bipolar construction, analog resistor trimming, and dual-doublet frequency compensation. Analog trimming is used to obtain low input offset voltages, while the precision-matching approach supports closely matched amplifier channels. These techniques support applications in measurement systems, audio and communication circuits, active filters, and low-level analog signal chains. Verified distributor information identifies the MC33077P as a 2-circuit, 8-PDIP general-purpose amplifier with 37 MHz bandwidth. A separate distributor listing reports an 11 V/µs slew rate, indicating that the device can support signal transitions well beyond audio frequencies when the surrounding circuit permits. Exact noise density, input bias current, input offset voltage, supply-current, and common-mode limits were not included in the supplied verification data and must be confirmed against the manufacturer datasheet before design release. Typical uses include instrumentation preamplification, active filtering, audio signal conditioning, and general high-frequency analog processing. In a typical signal chain, the device would follow a low-amplitude sensor or filter stage and drive a higher-impedance ADC input, buffer, or measurement front end. Because the amplifiers are internally matched, dual-channel differential or ratiometric measurements are practical when board layout and resistor matching are controlled. The primary design consideration is ensuring that the surrounding circuit does not degrade the amplifier's noise and accuracy performance. Place decoupling capacitors close to the supply pins, keep feedback-loop routing short, and avoid parasitic capacitance on high-impedance input nodes. Confirm the exact pinout, supply range, noise specifications, input common-mode limits, and output-current capability in the onsemi MC33077 datasheet before layout release.

RFQ যোগাযোগ
MC33078D - Dual Low-Noise 15MHz Op Amp | Texas Instruments
MC33078D

MC33078D - Dual Low-Noise 15MHz Op Amp | Texas Instruments

The Texas Instruments MC33078D is a bipolar dual operational amplifier with two independent amplifiers, 4.5 nV/√Hz input-voltage noise, a 15 MHz gain-bandwidth product, and a 7 V/µs slew rate. The device is supplied in an 8-pin SOIC package and is intended for audio and data-signal applications operating from -40 °C to 85 °C. A dual operational amplifier combines two amplifiers in one package, providing a practical path from analog signal conditioning to broader voltage-amplifier and analog IC functions. Each channel can amplify, buffer, filter, or drive a defined analog signal when used with suitable external components. MC33078D is particularly useful where low noise, wide bandwidth, and fast large-signal response are more important than the very low power consumption associated with CMOS-only amplifiers. The MC33078D uses bipolar technology, which supports low-noise operation and audio-focused performance. Its 4.5 nV/√Hz input-noise figure is suited to high-fidelity audio preamplification, microphone-stage signal conditioning, and low-level instrumentation. A 15 MHz gain-bandwidth product supports higher closed-loop bandwidth than slower general-purpose precision amplifiers, while the 7 V/µs slew rate provides improved ability to reproduce large-amplitude signals without excessive distortion. Two independent channels in one package reduce board area for balanced, differential, or multi-stage analog circuits. The 8-pin SOIC (D) package uses a familiar surface-mount footprint and supports automated assembly. Because its dual topology is not rail-to-rail by specification, applications must account for the allowable input and output voltage ranges when using single-supply or dual-supply configurations. Decoupling and stable feedback-network design remain essential for low-noise performance. Typical uses include stereo audio input amplification, active equalization, low-level sensor conditioning, line-stage amplification, and mixed-signal filtering. The two channels may also implement separate gain blocks, buffers, or active filters when the required common-mode range and output swing fit the application. In audio designs, low-noise operation helps preserve quiet signal paths, while the 15 MHz bandwidth and 7 V/µs slew rate provide headroom for detailed waveform reproduction. When laying out the circuit, place the power-supply bypass capacitor close to the supply pins and keep feedback resistors and input components compact to minimize parasitic capacitance and noise pickup. Verify gain-bandwidth and stability requirements with the actual noise-gain network. Single-supply operation may require biasing or AC coupling if the source cannot reach ground, so confirm the input common-mode range before finalizing the schematic. This product page combines manufacturer specifications, package information, practical analog-design guidance, and verified drop-in alternatives. It also highlights the exact differences between same-manufacturer and cross-manufacturer options, helping engineers compare compatibility, bandwidth, noise, temperature range, and application fit before making a board-level replacement decision.

RFQ যোগাযোগ
MC33078N - Dual Low-Noise 15MHz Op Amp | STMicroelectronics
MC33078N

MC33078N - Dual Low-Noise 15MHz Op Amp | STMicroelectronics

STMicroelectronics MC33078N is a monolithic dual bipolar operational amplifier optimized for low-noise audio and data-signal applications. The device provides two amplifiers, 4.5 nV/√Hz voltage-noise density, a 15 MHz gain-bandwidth product, and a 7 V/µs slew rate in an 8-pin Mini DIP package. It supports both single-supply and dual-supply operation, allowing its dual amplifier to process audio channels or implement gain, filtering, buffering, and signal-conditioning functions. An operational amplifier is a high-gain differential amplifier whose inverting and non-inverting inputs are compared to produce an amplified output. The bipolar input stage of the MC33078N combines low voltage noise with a wide gain-bandwidth product and high slew rate. In the broader semiconductor hierarchy, the MC33078N is an analog amplifier IC, more specifically a dual low-noise operational amplifier used in audio, instrumentation, and general-purpose signal-processing circuits. The principal performance features include 4.5 nV/√Hz input-voltage noise, 15 MHz gain-bandwidth product, and 7 V/µs slew rate. Its two amplifier channels provide design economy in stereo audio preamplifiers, active filters, line drivers, and instrumentation. The 8-pin Mini DIP package is also suitable for through-hole construction and prototyping where dual-line access and straightforward manual assembly are useful. The bipolar architecture provides the fast large-signal response needed for audio signals while retaining low noise for microphone-level and line-level work. The 15 MHz gain-bandwidth product supports wider closed-loop bandwidth than a low-frequency general-purpose amplifier, while the 7 V/µs slew rate helps the device reproduce large-amplitude waveforms without excessive distortion. Supply topology determines the usable common-mode and output-voltage ranges, so single- and dual-supply circuits require different biasing arrangements. Typical applications include stereo audio preamplification, active crossover and equalization networks, microphone preamplifiers, line-level buffers, active filters, sensor signal conditioning, and general dual-channel analog processing. In stereo equipment, the two channels can process left and right signals independently, reducing component count and helping maintain matched channel layouts. For new PCB designs, place the decoupling capacitor close to the supply pin and connect the exposed return path directly to the ground plane. When replacing an existing MC33078 footprint, verify the exact power-supply range, common-mode limits, output swing, noise characteristics, and stability requirements rather than relying only on the DIP-8 outline. This page combines manufacturer specifications, cross-reference information, practical application guidance, and package-aware replacement analysis to support faster engineering evaluation and sourcing.

RFQ যোগাযোগ