MAX3485CPA+ vs MAX3485EPA+ তুলনা

. বিস্তৃত সাথে-সাথে তুলনা MAX3485CPA+ নির্দিষ্ট Maxim Integrated ও MAX3485EPA+ নির্দিষ্ট Analog Devices. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ সক্রিয়
Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ সক্রিয়

বিশিষ্টতা তুলনা

পারামিটার MAX3485CPA+ MAX3485EPA+
ব্র্যান্ড Maxim Integrated Analog Devices
ক্যাটাগরি Interface ICs Interface ICs
লাইফসাইকেল স্ট্যাটাস সক্রিয় সক্রিয়
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
সাপ্লাই ভোল্টেজ 3.3 V —
ডেটা রেট Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
প্যাকেজ 8-pin PDIP 8-pin PDIP
মাউন্টিং টাইপ Through hole Through-hole
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
অপারেটিং তাপমাত্রা [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: device ESD rating] [DATA_NEEDED: ESD protection rating]
সাপ্লাই কারেন্ট [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Slew Rate [DATA_NEEDED: driver slew-rate value] —
RoHS স্ট্যাটাস [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Supply Voltage Range — 3 V to 3.6 V
Transmission Data Rate — Up to 10 Mbps
Driver Count — 1
Receiver Count — 1
Supported Standards — RS-422 and RS-485
Driver Protection — Short-circuit current limiting and thermal shutdown
Driver Output State During Thermal Shutdown — High impedance
Driver Slew Control — Slew-rate limited
Receiver Fail-Safe Feature — Yes
Operating Voltage — 3.3 V nominal
Power Dissipation — [DATA_NEEDED: power dissipation specification]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

ডেটাসফেইট ও সম্বল

সমস্ত পণ্যগুলি ব্রাউজ করুন BOM তৈরি করুন রিকোয়েস্ট কোয়ুট