MAX3485CPA+ vs MAX3485EPA+ 比較

詳細並排比較 MAX3485CPA+ 由 Maxim Integrated 與 MAX3485EPA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ 啟用中
Analog Devices
MAX3485EPA+ MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3485EPA+ ✓ 啟用中

規格比較

參數 MAX3485CPA+ MAX3485EPA+
品牌 Maxim Integrated Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type RS-485/RS-422 transceiver RS-485/RS-422 interface transceiver
供應電壓 3.3 V —
資料速率 Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
封裝 8-pin PDIP 8-pin PDIP
安裝類型 Through hole Through-hole
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
工作溫度 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
ESD Protection [DATA_NEEDED: device ESD rating] [DATA_NEEDED: ESD protection rating]
供應電流 [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Slew Rate [DATA_NEEDED: driver slew-rate value] —
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Supply Voltage Range — 3 V to 3.6 V
Transmission Data Rate — Up to 10 Mbps
Driver Count — 1
Receiver Count — 1
Supported Standards — RS-422 and RS-485
Driver Protection — Short-circuit current limiting and thermal shutdown
Driver Output State During Thermal Shutdown — High impedance
Driver Slew Control — Slew-rate limited
Receiver Fail-Safe Feature — Yes
Operating Voltage — 3.3 V nominal
Power Dissipation — [DATA_NEEDED: power dissipation specification]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價