MAX3485CPA+ vs MAX3485EPA+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3485CPA+ tarafından Maxim Integrated ve MAX3485EPA+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MAX3485CPA+ | MAX3485EPA+ |
|---|---|---|
| Marka | Maxim Integrated | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 interface transceiver |
| Besleme Gerilimi | 3.3 V | — |
| Veri Hızı | Up to 10 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Communication Standard | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Montaj Türü | Through hole | Through-hole |
| Transceiver Configuration | Half-duplex transceiver | — |
| Low-Power Operation | 3.3 V low-power transceiver | — |
| EMI and Reflection Control | Slew-rate-limited driver intended to minimize EMI and cable reflections | — |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| ESD Protection | [DATA_NEEDED: device ESD rating] | [DATA_NEEDED: ESD protection rating] |
| Besleme Akımı | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Differential Output | [DATA_NEEDED: differential output voltage specifications] | — |
| Receiver Input Range | [DATA_NEEDED: receiver differential input range] | — |
| Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Slew Rate | [DATA_NEEDED: driver slew-rate value] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Transmission Data Rate | — | Up to 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-422 and RS-485 |
| Driver Protection | — | Short-circuit current limiting and thermal shutdown |
| Driver Output State During Thermal Shutdown | — | High impedance |
| Driver Slew Control | — | Slew-rate limited |
| Receiver Fail-Safe Feature | — | Yes |
| Operating Voltage | — | 3.3 V nominal |
| Power Dissipation | — | [DATA_NEEDED: power dissipation specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |