Microchip Technology

A3P125-1PQ208 - 125K Gate Flash FPGA | Microchip Technology

MPN: A3P125-1PQ208 ✓ সক্রিয়
1.5 V Vdss 208-pin PQFP Package Flash-based CMOS Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

A3P125-1PQ208 সারাংশ

The Microchip Technology A3P125-1PQ208 is a 125,000-system-gate flash-based FPGA in a 208-pin PQFP package, with 3,072 logic cells, 133 configurable I/O pins, and 36,864 bits of block RAM. It is a ProASIC3 device built on a 130 nm CMOS process and operates from a 1.5 V core supply. The package is a 28 mm × 28 mm plastic quad flat package with a 0.50 mm terminal pitch.

An FPGA is a programmable semiconductor whose logic, interconnect, and I/O resources are configured after manufacture. Within the broader semiconductor hierarchy, this device is a field-programmable gate array, then a programmable logic device, and finally an integrated circuit. The ProASIC3 family combines flash configuration storage with user-programmable logic blocks, making it suitable for designs requiring flexible post-build configuration, interface adaptation, and modest logic density without a mask change.

The A3P125 device family provides 125,000 system gates and 3,072 logic cells. Its architecture includes 144 kbits of optional true dual-port SRAM across the broader family, while the A3P125 listing identifies 36,864 bits of embedded block RAM. The 133 user I/O pins support external interfaces and allow PCB designers to route signals around the device according to board-level constraints.

Programmable logic is organized into logic array blocks connected by a programmable interconnect. The 130 nm, seven-layer CMOS implementation supports integration of flash configuration memory, logic, RAM, and I/O in one monolithic device. This architecture is useful for control logic, protocol bridging, industrial interfaces, embedded instrumentation, and low-volume customization where field updates are valuable.

Typical applications include industrial automation, communications interface conditioning, test and measurement equipment, embedded control, and security or access-control systems. The device is particularly relevant when a design needs moderate logic capacity, numerous external connections, and nonvolatile FPGA configuration in a conventional 208-pin QFP package.

PCB implementation requires careful planning for the 0.50 mm package pitch, 208 external terminals, a 1.5 V core supply, configuration programming interface, decoupling, and signal-integrity control. Because the package has a large number of fine-pitch leads, inspect the manufacturer pin-assignment and land-pattern documentation before routing or defining board-library symbols.

This page combines the exact orderable-part specifications, package identity, source documentation, orderable family variants, and practical design considerations needed to evaluate the A3P125-1PQ208 for a programmable-logic design.

এর জন্য ড্রপ-ইন বিকল্প A3P125-1PQ208 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible A3P125-1PQ208 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package Dimensions, Package Type, Configuration Memory, Logic Cells / Logic Blocks, Product Type.

Microchip Technology
Package Dimensions: 28 x 28 mm
Package Type: 208-pin plastic QFP
Configuration Memory: Flash-based
এর সাথে তুলনা করুন A3P125-1PQ208 →
Microchip Technology
Package Dimensions: 28 mm x 28 mm
Package Type: 208-BFQFP plastic QFP
Logic Cells / Logic Blocks: 3,072 logic cells
এর সাথে তুলনা করুন A3P125-1PQ208 →

A3P125-PQ208

✅ ড্রপ-ইন
Microchip Technology
📦 PQFP-208
Field Programmable Gate Array (FPGA) · ProASIC3 · 125,000 gates · 3,072 logic blocks · 36,864 bits · 133 I/Os · 208 pins · Flash-based

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

A3P125-PQ208I

✅ ড্রপ-ইন
Microchip Technology
📦 PQFP-208
ProASIC3 flash-based field-programmable gate array · 125,000 gates · 3,072 logic cells · 36,864 bits · 133 I/Os · CMOS · Nonvolatile flash · 130 nm CMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

A3P125-1PQ208Y

✅ ড্রপ-ইন
📦 PQFP-208
Same listed 125,000 system gates, 3,072 logic cells, 133 I/O pins, and 208-terminal PQFP package; Y-suffix characteristics require verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQG208

✅ ড্রপ-ইন
📦 PQFP-208
Same A3P125 family resource level and 208-pin PQFP format; the PQG208 ordering suffix must be checked for grade and timing differences.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQG208I

✅ ড্রপ-ইন
📦 PQFP-208
Same A3P125 family, 208-pin PQFP format, and 1.5KLE-class resource listing; the I ordering suffix changes the device grade and temperature range.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-1PQ208 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type ProASIC3 Field Programmable Gate Array (FPGA) IC
System Gates 125,000 gates
Logic Cells 3,072 logic cells
Logic Blocks 3,072 Logic Array Blocks
User I/O 133 I/O pins
Block RAM 36,864 bits
Configuration Memory Flash-based CMOS
Process Technology 130 nm CMOS
Metal Layers 7 layers, including 6 copper layers
Core Supply Voltage 1.5 V
অপারেটিং তাপমাত্রা 0 °C to 70 °C
Package Type 208-pin PQFP
Package Dimensions 28 mm × 28 mm × 3.40 mm
Terminal Pitch 0.50 mm
Logic Family CMOS
Programmable Architecture ProASIC3 flash FPGA with optional Soft ARM support

A3P125-1PQ208 28 mm × 28 mm × 3.40 mm পিন কনফিগারেশন গাইড

A3P125-1PQ208 (28 mm × 28 mm × 3.40 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

A3P125-1PQ208-এর জন্য 28 mm × 28 mm × 3.40 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি A3P125-1PQ208.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

A3P125-1PQ208 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation and Control, Communications Interface Conditioning, Test and Measurement Equipment, Embedded Instrumentation and Data Acquisition, Access Control and Security Systems, Embedded Control and Instrumentation.

🏭

Industrial Automation and Control

The A3P125-1PQ208 fits industrial control logic that combines deterministic sequencing with a substantial number of external signals. Its 3,072 logic cells and 125,000 system gates provide capacity for state machines, interlocks, counters, and communication logic, while 133 user I/O pins simplify connections to sensors, actuators, and field-bus transceivers. The 1.5 V core architecture is appropriate for a modern programmable-logic power plan, although the 0 °C to 70 °C rating must be checked against the enclosure temperature. For an enclosure that regularly exceeds 70 °C, select an explicitly industrial-rated A3P125 ordering variant rather than assuming suffix interchangeability.

🌐

Communications Interface Conditioning

The A3P125-1PQ208 is useful as a configurable interface-conditioning FPGA between processors, transceivers, and legacy peripheral logic. With 3,072 logic cells, 36,864 bits of block RAM, and 133 user I/O pins, it can support protocol conversion, framing, buffering, timing alignment, and status monitoring without requiring a mask change. The flash-based ProASIC3 configuration also supports field upgrades after deployment. Engineering attention should remain on interface timing, I/O standards, clocking, and pin assignment because the device's 0.50 mm PQFP lead pitch can constrain escape routing on multilayer boards.

🔧

Test and Measurement Equipment

The A3P125-1PQ208 can implement sequencing, acquisition control, trigger logic, instrument bus arbitration, and front-panel state management in modular test equipment. Its 133 configurable I/O pins provide ample connections for sensors, relays, displays, and communication controllers, while the integrated flash configuration allows the instrument logic to be revised without replacing the assembled PCB. Block RAM can hold temporary measurement records, status vectors, or communication buffers. A disciplined clock, reset, and power design is essential because measurements depend on deterministic behavior even when the external interface appears asynchronous.

📊

Embedded Instrumentation and Data Acquisition

The A3P125-1PQ208 is appropriate for data-acquisition front ends that need channel control, sampling sequencing, digital filtering, and communication formatting in one programmable device. The A3P125 family's 3,072 logic cells can implement control pipelines and interface state machines, while 36,864 bits of block RAM support buffering and calibration data. The 133 I/O pins allow direct connection to multiplexers, converters, and status inputs. Designers should partition the logic into clocked domains, define reset behavior for every sequential block, and validate I/O timing against the selected external component timing specifications.

🔒

Access Control and Security Systems

The A3P125-1PQ208 can consolidate credential readers, alarm inputs, access outputs, and communications logic in a compact programmable platform. Its 125,000 system gates are sufficient for multiple credential protocols, event logging, debounce and qualification logic, and supervisory state machines, while flash-based configuration simplifies controlled firmware or bitstream maintenance. Security designs should add appropriate authentication, key protection, tamper response, and update rollback mechanisms rather than relying on FPGA configuration alone. The 208-pin package also leaves flexibility for peripheral drivers and isolated interface signaling.

🖥️

Embedded Control and Instrumentation

The A3P125-1PQ208 serves well in embedded controllers that combine fixed control functions with adaptable I/O, diagnostics, and field-programmable behavior. Its 133 user I/O pins can support digital sensors, actuators, communication ports, and local human interfaces, while 3,072 logic cells accommodate supervisory logic around a host processor. Flash configuration allows controlled updates, and the 130 nm CMOS implementation is consistent with a straightforward 1.5 V core power architecture. Before layout, assign I/O standards and termination carefully, then verify every external timing path against the published AC characteristics.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

A3P125-PQ208I Microchip Technology ব্যবহৃত হয়: Industrial Automation and Control, Test and Measurement Equipment, Access Control and Security Systems A3P125-PQ208 Microchip Technology ব্যবহৃত হয়: Industrial Automation and Control, Test and Measurement Equipment, Access Control and Security Systems A3P125-1PQ208Y Related 208-terminal ProASIC3 configuration for protocol-control logic ব্যবহৃত হয়: Communications Interface Conditioning, Embedded Instrumentation and Data Acquisition A3P125-PQG208 Package-compatible ProASIC3 alternative for interface bridging ব্যবহৃত হয়: Communications Interface Conditioning, Embedded Control and Instrumentation A3P125-PQG208I Package-compatible ProASIC3 option with an industrial ordering designation ব্যবহৃত হয়: Embedded Instrumentation and Data Acquisition, Embedded Control and Instrumentation
What are the key specifications of A3P125-1PQ208 that engineers should know?
The A3P125-1PQ208 is a 125,000-system-gate, flash-based FPGA with 3,072 logic cells, 36,864 bits of block RAM, 133 user I/O pins, and a 1.5 V core supply in a 208-pin PQFP package. According to the Microchip Technology A3P125 product page and device documentation, it uses a 130 nm CMOS process with seven metal layers and is packaged in a 28 mm × 28 mm body with a 0.50 mm pitch.
Where to download the A3P125-1PQ208 datasheet PDF?
The official A3P125 family documentation is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/A3P125. The device-specific listings also identify the A3P125-1PQ208 as a ProASIC3 FPGA with a 208-pin PQFP package. Use the package pin-assignment, DC characteristics, switching characteristics, and recommended operating conditions sections when releasing the PCB and power design.
Where can I find the A3P125-1PQ208 pinout?
The A3P125-1PQ208 pin assignments are documented in the package pin-assignment section of the manufacturer ProASIC3 documentation, linked from the Microchip Technology A3P125 product page. The device uses a 208-pin PQFP with a 0.50 mm pitch. Assign every power, ground, configuration, clock, and user I/O signal from that table rather than inferring pin names from package position alone.
What is the A3P125-1PQ208 used for?
The A3P125-1PQ208 is used for moderate-density programmable logic with 125,000 system gates, 3,072 logic cells, and 133 user I/O pins. Its flash-based configuration supports designs in industrial control, communications interfaces, test equipment, embedded instrumentation, and access-control systems. The 208-pin PQFP package provides more external connectivity than smaller ProASIC3 package options while retaining a standard 0.50 mm pitch.
Can A3P125-PQ208 replace A3P125-1PQ208?
A3P125-PQ208 is a closely related ProASIC3 orderable variant with the same 208-pin PQFP package and the same listed 125,000 system gates, 3,072 logic cells, and 133 I/O pins. According to Microchip ordering information, suffix differences distinguish device configuration, speed, or temperature characteristics, so verify the specific suffix requirements and timing specifications before approving it as a production replacement.
What is the difference between A3P125-1PQ208 and A3P125-PQ208I?
Both devices are ProASIC3 A3P125 devices in the 208-pin PQFP package with 125,000 system gates and 3,072 logic cells. Their documented ordering suffixes distinguish their electrical or environmental ratings, so the temperature grade, speed grade, and operating limits must be checked against the original design requirements. A footprint-compatible package alone does not establish that every timing and temperature condition is equivalent.
Is A3P125-1PQ208 suitable for industrial control systems?
The A3P125-1PQ208 is suitable for industrial-control functions when its 0 °C to 70 °C operating range, 1.5 V core supply, and available I/O budget match the enclosure environment. Its flash-based configuration and 3,072 logic cells are useful for deterministic control, sequencing, and interface logic. Industrial systems requiring a wider temperature range should select an explicitly industrial-rated orderable variant.
A3P125-1PQ208 vs XC2C384-7PQ208C - which is better for a new design?
The A3P125-1PQ208 provides 125,000 system gates and 3,072 logic cells, while the XC2C384-7PQ208C belongs to a different FPGA family and has a different architecture and device naming system. Both use a 208-pin PQFP format, but a shared package does not prove electrical, software, or functional drop-in compatibility. The A3P125 is preferable when its ProASIC3 resources and 130 nm flash architecture match the design.
When should I choose A3P125-1PQ208 over A3P125-PQ208?
Choose the A3P125-1PQ208 when the design requires the exact suffix specified for its timing, temperature, or qualification requirements. A3P125-PQ208 is a related device in the same ProASIC3 family and package, but suffix-specific characteristics must be compared before substitution. The A3P125-1PQ208 is listed for 0 °C to 70 °C operation and 1.5 V core supply.
What can replace A3P125-1PQ208?
A3P125-PQ208, A3P125-PQ208I, and A3P125-1PQ208Y are package-compatible ProASIC3 alternatives identified by family documentation and distributor records. Their orderable suffixes must be checked for temperature, speed, and qualification differences before using one as a replacement. The A3P125-1PQ208Y is documented as a 208-terminal PQFP device with 133 configurable I/O pins.
Is A3P125-1PQ208 the same as A3P125-PQG208?
Both names refer to closely related A3P125 ProASIC3 devices in the 208-pin PQFP form, but the ordering suffix must still be checked before substitution. The A3P125-PQG208 listing identifies an in-stock 208-pin device, while the A3P125-1PQ208 is specified for 0 °C to 70 °C operation. Package equivalence does not by itself guarantee identical timing or temperature ratings.
Where to buy A3P125-1PQ208 online?
Use the Request a Quote form on this page to request A3P125-1PQ208 availability, order quantities, and current commercial terms. The target is an exact, traceable orderable part with a 208-pin PQFP package, so the request should include the full A3P125-1PQ208 MPN and the required delivery quantity. This avoids accidentally substituting a related A3P125 suffix.
What is the price of A3P125-1PQ208?
The current commercial price for A3P125-1PQ208 is obtained through the Request a Quote form on this page rather than a static listing price. Quote review should use the exact A3P125-1PQ208 MPN, including the speed and package suffix. Related A3P125 variants may have different availability, qualification, or commercial terms and should not be priced as the target part without confirmation.
What is the lead time and stock status of A3P125-1PQ208?
Current stock, lead time, and minimum order quantity for A3P125-1PQ208 should be confirmed through the Request a Quote form on this page. The exact MPN is 208-pin PQFP, and a related suffix cannot be assumed to have identical allocation. Include the required quantity, production schedule, and delivery location when submitting the request.
Does A3P125-1PQ208 support nonvolatile configuration?
Yes, the A3P125-1PQ208 belongs to the flash-based ProASIC3 family, so its configuration memory is integrated on the FPGA rather than implemented as an external configuration PROM. This architecture supports reprogramming during development and field updates when the board design, security controls, and device programming procedure permit it.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা A3P125-1PQ208 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose A3P125-1PQ208 when the design needs a ProASIC3 FPGA with 125,000 system gates, 3,072 logic cells, 36,864 bits of block RAM, and 133 user I/O pins in a 208-pin PQFP package. It is well suited to industrial control, interface conditioning, test equipment, and embedded instrumentation where flash-based configuration and moderate logic capacity are important. A3P125-PQ208, A3P125-PQ208I, and A3P125-1PQ208Y are same-family package alternatives, but each ordering suffix must be checked for speed, temperature, and qualification requirements before substitution. A3P125-PQG208 and A3P125-PQG208I provide additional package-code options that likewise require suffix verification. XC2C384-7PQ208C has the same general PQFP-208 format but is not a drop-in functional replacement because it belongs to a different FPGA architecture and resource set.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য A3P125-PQ208 A3P125-PQ208I A3P125-1PQ208Y A3P125-PQG208 A3P125-PQG208I
Package PQFP-208 PQFP-208 PQFP-208 PQFP-208 PQFP-208 PQFP-208
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology

মূল পার্থক্যসমূহ

  • Exact A3P125 family resource configuration (বনামXC2C384-7PQ208C)
  • Direct same-family package reuse (বনামA3P125-PQ208)
  • Flash-based configuration for field updates (বনামA3P125-PQ208I)

ডিজাইন নোট

Use the manufacturer package drawing and pin-assignment table as the authority for the 208-lead land pattern, pad dimensions, and exposed assembly geometry. The PQFP body is 28 mm × 28 mm with a 0.50 mm terminal pitch, so the footprint must be checked against the exact assembly and land-pattern recommendations rather than generated only from pitch and lead count. Preserve solder-mask and copper-clearance rules for fine-pitch leads, and inspect the assembled board with adequate magnification.

Build the 1.5 V core rail from the manufacturer DC and switching characteristics, including tolerance, ripple, startup, and current requirements. Place local high-frequency decoupling close to the device's supply pins and keep the return path continuous through the ground plane. Because the exact recommended capacitor values and configuration-pin requirements are not stated here, use the manufacturer power-circuit and decoupling guidance for the selected package and operating temperature.

Separate sensitive configuration, clock, and programming signals from noisy interface routing where practical. Apply the manufacturer's I/O standard and signal-integrity guidance to every user pin, and terminate unused inputs according to the device recommendations. The 133 user I/O pins provide substantial routing flexibility, but the 0.50 mm package pitch makes fan-out and layer-transition planning important. Review clock topology, reset distribution, and timing exceptions before placement and routing sign-off.

Do not treat every A3P125 suffix as automatically interchangeable. Confirm the exact speed grade, temperature range, configuration option, and ordering requirements for A3P125-1PQ208 and the proposed substitute. A package-compatible replacement must still be checked against timing, I/O behavior, supply requirements, and device identifiers in the programming toolchain. A successful footprint fit is necessary for a drop-in candidate but is not sufficient for functional equivalence.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit compliance statements are present in the manufacturer, distributor, or datasheet-index records used for this product. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from current manufacturer documentation before release.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

a3p125 vqg100i a3p125 pqg208i a3p125 pqg208 a3p125 tqg144 a3p125 vqg100 a3p125 fgg144 actel a3p125 A3P125-1PQ208 datasheet A3P125-1PQ208 pinout A3P125-1PQ208 replacement A3P125-1PQ208 equivalent A3P125-1PQ208 footprint A3P125-1PQ208 price A3P125-1PQ208 stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology A3P125-1PQ208 A3P125 ProASIC3 FPGA CPLD programmable logic device integrated circuit semiconductor flash-based configuration CMOS 130 nm process technology logic array block system gates block RAM true dual-port SRAM user I/O PQFP-208 QFN family surface mount SMD industrial automation test and measurement equipment embedded control communication interface
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন