A3P125-1PQ208 - 125K Gate Flash FPGA | Microchip Technology
MPN: A3P125-1PQ208 ✓ فعالA3P125-1PQ208 نمای کلی
An FPGA is a programmable semiconductor whose logic, interconnect, and I/O resources are configured after manufacture. Within the broader semiconductor hierarchy, this device is a field-programmable gate array, then a programmable logic device, and finally an integrated circuit. The ProASIC3 family combines flash configuration storage with user-programmable logic blocks, making it suitable for designs requiring flexible post-build configuration, interface adaptation, and modest logic density without a mask change.
The A3P125 device family provides 125,000 system gates and 3,072 logic cells. Its architecture includes 144 kbits of optional true dual-port SRAM across the broader family, while the A3P125 listing identifies 36,864 bits of embedded block RAM. The 133 user I/O pins support external interfaces and allow PCB designers to route signals around the device according to board-level constraints.
Programmable logic is organized into logic array blocks connected by a programmable interconnect. The 130 nm, seven-layer CMOS implementation supports integration of flash configuration memory, logic, RAM, and I/O in one monolithic device. This architecture is useful for control logic, protocol bridging, industrial interfaces, embedded instrumentation, and low-volume customization where field updates are valuable.
Typical applications include industrial automation, communications interface conditioning, test and measurement equipment, embedded control, and security or access-control systems. The device is particularly relevant when a design needs moderate logic capacity, numerous external connections, and nonvolatile FPGA configuration in a conventional 208-pin QFP package.
PCB implementation requires careful planning for the 0.50 mm package pitch, 208 external terminals, a 1.5 V core supply, configuration programming interface, decoupling, and signal-integrity control. Because the package has a large number of fine-pitch leads, inspect the manufacturer pin-assignment and land-pattern documentation before routing or defining board-library symbols.
This page combines the exact orderable-part specifications, package identity, source documentation, orderable family variants, and practical design considerations needed to evaluate the A3P125-1PQ208 for a programmable-logic design.
جایگزینهای drop-in برای A3P125-1PQ208 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای A3P125-1PQ208 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package Dimensions, Package Type, Configuration Memory, Logic Cells / Logic Blocks, Product Type.
A3P125-PQ208
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P125-PQ208I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←A3P125-1PQ208Y
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
A3P125-PQG208
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
A3P125-PQG208I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
A3P125-1PQ208 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | ProASIC3 Field Programmable Gate Array (FPGA) IC |
| System Gates | 125,000 gates |
| Logic Cells | 3,072 logic cells |
| Logic Blocks | 3,072 Logic Array Blocks |
| User I/O | 133 I/O pins |
| Block RAM | 36,864 bits |
| Configuration Memory | Flash-based CMOS |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers, including 6 copper layers |
| Core Supply Voltage | 1.5 V |
| دمای کاری | 0 °C to 70 °C |
| Package Type | 208-pin PQFP |
| Package Dimensions | 28 mm × 28 mm × 3.40 mm |
| Terminal Pitch | 0.50 mm |
| Logic Family | CMOS |
| Programmable Architecture | ProASIC3 flash FPGA with optional Soft ARM support |
راهنمای پیکربندی پین A3P125-1PQ208 28 mm × 28 mm × 3.40 mm
پیکربندی پین برای A3P125-1PQ208 (پکیج 28 mm × 28 mm × 3.40 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای A3P125-1PQ208.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
A3P125-1PQ208 مناسب است برای 6 کاربردs: Industrial Automation and Control, Communications Interface Conditioning, Test and Measurement Equipment, Embedded Instrumentation and Data Acquisition, Access Control and Security Systems, Embedded Control and Instrumentation.
Industrial Automation and Control
The A3P125-1PQ208 fits industrial control logic that combines deterministic sequencing with a substantial number of external signals. Its 3,072 logic cells and 125,000 system gates provide capacity for state machines, interlocks, counters, and communication logic, while 133 user I/O pins simplify connections to sensors, actuators, and field-bus transceivers. The 1.5 V core architecture is appropriate for a modern programmable-logic power plan, although the 0 °C to 70 °C rating must be checked against the enclosure temperature. For an enclosure that regularly exceeds 70 °C, select an explicitly industrial-rated A3P125 ordering variant rather than assuming suffix interchangeability.
پیشنهادی
Communications Interface Conditioning
The A3P125-1PQ208 is useful as a configurable interface-conditioning FPGA between processors, transceivers, and legacy peripheral logic. With 3,072 logic cells, 36,864 bits of block RAM, and 133 user I/O pins, it can support protocol conversion, framing, buffering, timing alignment, and status monitoring without requiring a mask change. The flash-based ProASIC3 configuration also supports field upgrades after deployment. Engineering attention should remain on interface timing, I/O standards, clocking, and pin assignment because the device's 0.50 mm PQFP lead pitch can constrain escape routing on multilayer boards.
پیشنهادی
Test and Measurement Equipment
The A3P125-1PQ208 can implement sequencing, acquisition control, trigger logic, instrument bus arbitration, and front-panel state management in modular test equipment. Its 133 configurable I/O pins provide ample connections for sensors, relays, displays, and communication controllers, while the integrated flash configuration allows the instrument logic to be revised without replacing the assembled PCB. Block RAM can hold temporary measurement records, status vectors, or communication buffers. A disciplined clock, reset, and power design is essential because measurements depend on deterministic behavior even when the external interface appears asynchronous.
پیشنهادی
Embedded Instrumentation and Data Acquisition
The A3P125-1PQ208 is appropriate for data-acquisition front ends that need channel control, sampling sequencing, digital filtering, and communication formatting in one programmable device. The A3P125 family's 3,072 logic cells can implement control pipelines and interface state machines, while 36,864 bits of block RAM support buffering and calibration data. The 133 I/O pins allow direct connection to multiplexers, converters, and status inputs. Designers should partition the logic into clocked domains, define reset behavior for every sequential block, and validate I/O timing against the selected external component timing specifications.
پیشنهادی
Access Control and Security Systems
The A3P125-1PQ208 can consolidate credential readers, alarm inputs, access outputs, and communications logic in a compact programmable platform. Its 125,000 system gates are sufficient for multiple credential protocols, event logging, debounce and qualification logic, and supervisory state machines, while flash-based configuration simplifies controlled firmware or bitstream maintenance. Security designs should add appropriate authentication, key protection, tamper response, and update rollback mechanisms rather than relying on FPGA configuration alone. The 208-pin package also leaves flexibility for peripheral drivers and isolated interface signaling.
پیشنهادی
Embedded Control and Instrumentation
The A3P125-1PQ208 serves well in embedded controllers that combine fixed control functions with adaptable I/O, diagnostics, and field-programmable behavior. Its 133 user I/O pins can support digital sensors, actuators, communication ports, and local human interfaces, while 3,072 logic cells accommodate supervisory logic around a host processor. Flash configuration allows controlled updates, and the 130 nm CMOS implementation is consistent with a straightforward 1.5 V core power architecture. Before layout, assign I/O standards and termination carefully, then verify every external timing path against the published AC characteristics.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای A3P125-1PQ208 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | A3P125-PQ208 | A3P125-PQ208I | A3P125-1PQ208Y | A3P125-PQG208 | A3P125-PQG208I |
|---|---|---|---|---|---|---|
| Package | PQFP-208 | PQFP-208 | PQFP-208 | PQFP-208 | PQFP-208 | PQFP-208 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
تفاوتهای کلیدی
- Exact A3P125 family resource configuration (در مقابلXC2C384-7PQ208C)
- Direct same-family package reuse (در مقابلA3P125-PQ208)
- Flash-based configuration for field updates (در مقابلA3P125-PQ208I)
یادداشتهای طراحی
Use the manufacturer package drawing and pin-assignment table as the authority for the 208-lead land pattern, pad dimensions, and exposed assembly geometry. The PQFP body is 28 mm × 28 mm with a 0.50 mm terminal pitch, so the footprint must be checked against the exact assembly and land-pattern recommendations rather than generated only from pitch and lead count. Preserve solder-mask and copper-clearance rules for fine-pitch leads, and inspect the assembled board with adequate magnification.
Build the 1.5 V core rail from the manufacturer DC and switching characteristics, including tolerance, ripple, startup, and current requirements. Place local high-frequency decoupling close to the device's supply pins and keep the return path continuous through the ground plane. Because the exact recommended capacitor values and configuration-pin requirements are not stated here, use the manufacturer power-circuit and decoupling guidance for the selected package and operating temperature.
Separate sensitive configuration, clock, and programming signals from noisy interface routing where practical. Apply the manufacturer's I/O standard and signal-integrity guidance to every user pin, and terminate unused inputs according to the device recommendations. The 133 user I/O pins provide substantial routing flexibility, but the 0.50 mm package pitch makes fan-out and layer-transition planning important. Review clock topology, reset distribution, and timing exceptions before placement and routing sign-off.
Do not treat every A3P125 suffix as automatically interchangeable. Confirm the exact speed grade, temperature range, configuration option, and ordering requirements for A3P125-1PQ208 and the proposed substitute. A package-compatible replacement must still be checked against timing, I/O behavior, supply requirements, and device identifiers in the programming toolchain. A successful footprint fit is necessary for a drop-in candidate but is not sufficient for functional equivalence.
اطلاعات انطباق
No explicit compliance statements are present in the manufacturer, distributor, or datasheet-index records used for this product. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from current manufacturer documentation before release.