Microchip Technology

A3P125-PQ208I - 125K Gate Flash FPGA | Microchip Technology

MPN: A3P125-PQ208I ✓ সক্রিয়
208-BFQFP plastic QFP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

A3P125-PQ208I সারাংশ

The Microchip Technology A3P125-PQ208I is a ProASIC3 field-programmable gate array with 125,000 system gates, 3,072 logic cells, and 133 user I/Os in a 208-pin BFQFP package. It is a flash-based CMOS FPGA built on a 130 nm, 7-layer metal process with six copper layers.

An FPGA is a programmable digital semiconductor used to implement logic functions, interfaces, control systems, and signal processing by configuring an internal array of configurable logic blocks and routing resources. The ProASIC3 family combines nonvolatile flash configuration with a single-chip, reprogrammable implementation, allowing a design to be updated without using a separate configuration memory device. Its architecture falls within the broader FPGA and CPLD hierarchy of programmable logic semiconductors.

The A3P125 device provides 36,864 internal SRAM bits and up to 133 user I/Os according to the product listing. Its configurable architecture supports system-level logic consolidation, while flash-based configuration provides Instant On operation after programming. The 208-pin plastic QFP package measures 28 mm by 28 mm, has a 0.50 mm terminal pitch, and is 3.40 mm high. The suffix I denotes the ordering configuration listed by Microchip Technology for this device.

A key implementation advantage is migration support within the ProASIC3 family. Microchip's A3P250 migration application note identifies A3P125 as a lower-logic-density destination and emphasizes package-based pin compatibility within the family. This makes the A3P125-PQ208I relevant to prototype-to-production consolidation and ASIC-like embedded control designs, subject to device-specific timing, resource, and I/O validation.

Typical uses include industrial control and automation, communications infrastructure, instrumentation, embedded protocol handling, and low-volume ASIC replacement. The 133 I/O count provides substantial board-level connectivity, while 3,072 logic cells can implement control logic, state machines, interfaces, and parallel data-processing functions in one programmable device.

Designers should verify the exact I/O standards, supported clocking resources, available PLL and memory resources, power requirements, and programming configuration in the Microchip A3P125 documentation. PCB design must follow the 208-pin package drawing, provide clean power and ground distribution, and reserve programming and configuration resources for the intended toolchain and system architecture.

This product overview combines the manufacturer specifications, package information, logic-capacity details, migration guidance, application analysis, and drop-in ordering alternatives into a design-focused reference. It also highlights verification points that engineers should check before reusing an existing 208-pin ProASIC3 PCB or transferring a design from a larger device.

এর জন্য ড্রপ-ইন বিকল্প A3P125-PQ208I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible A3P125-PQ208I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package Dimensions, Package Type, Configuration Memory, Metal Layers, Process Technology.

Microchip Technology
Package Dimensions: 28 mm × 28 mm × 3.40 mm
Package Type: 208-pin PQFP
Configuration Memory: Flash-based CMOS
এর সাথে তুলনা করুন A3P125-PQ208I →
Microchip Technology
Configuration Memory: Flash-based
Metal Layers: 7 layers
Process Technology: 130 nm
এর সাথে তুলনা করুন A3P125-PQ208I →
Microchip Technology
Package Dimensions: 28 x 28 mm
Package Type: 208-pin plastic QFP
Configuration Memory: Flash-based
এর সাথে তুলনা করুন A3P125-PQ208I →

A3P125-PQ208

✅ ড্রপ-ইন
Microchip Technology
📦 208-BFQFP
Field Programmable Gate Array (FPGA) · ProASIC3 · 125,000 gates · 3,072 logic blocks · 36,864 bits · 133 I/Os · 208 pins · Flash-based

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

A3P125-PQG208

✅ ড্রপ-ইন
📦 208-BFQFP
Related 208-pin ordering code with 0% change in the listed 125,000 gates and 3,072 logic cells; qualification and lifecycle must be verified

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQG208I

✅ ড্রপ-ইন
📦 208-BFQFP
Related industrial ordering code with the same listed logic capacity and 208-pin format, but the commercial record identifies it as discontinued

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQ208IY

✅ ড্রপ-ইন
📦 208-BFQFP
Related 208-pin ProASIC3 ordering code with the same 125,000-gate and 3,072-logic-cell core; exact grade and temperature require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQ208YI

✅ ড্রপ-ইন
📦 208-BFQFP
Related 208-pin ProASIC3 ordering code with the same 125,000-gate and 3,072-logic-cell core; exact qualification and temperature require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

A3P125-PQ208I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type ProASIC3 flash-based field-programmable gate array
System Gates 125,000 gates
Logic Cells / Logic Blocks 3,072 logic cells
Internal SRAM 36,864 bits
User I/O Count 133 I/Os
Logic Family CMOS
Configuration Technology Nonvolatile flash
Process Technology 130 nm CMOS
Metal Layers 7 layers, including 6 copper layers
Package Type 208-BFQFP plastic QFP
Package Dimensions 28 mm x 28 mm
Package Height 3.40 mm
Terminal Pitch 0.50 mm
Total Pins 208 pins
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস unknown
REACH Status unknown

A3P125-PQ208I 3.40 mm পিন কনফিগারেশন গাইড

A3P125-PQ208I (3.40 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

A3P125-PQ208I-এর জন্য 3.40 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি A3P125-PQ208I.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

A3P125-PQ208I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation and PLC Control, Communications Protocol Consolidation, Test and Measurement Instrumentation, ASIC Replacement and Design Consolidation, Embedded Protocol and Interface Bridge, Aerospace and Defense Control Logic.

🏭

Industrial Automation and PLC Control

The A3P125-PQ208I fits programmable industrial controllers because its 3,072 logic cells can implement sequencing, state machines, interlocks, and communication logic while 133 I/Os connect field inputs and outputs. The flash-based ProASIC3 architecture retains its configuration after power cycling, supporting deterministic startup without a separate configuration PROM. Its 208-pin BFQFP also provides enough physical connectivity for multiple buses, discrete sensors, actuator drivers, and status indicators. Before release, verify the industrial temperature grade, logic levels, I/O tolerances, timing constraints, and isolation requirements against the equipment specification.

🌐

Communications Protocol Consolidation

The A3P125-PQ208I can consolidate parallel interface logic, packet framing, buffering, and protocol state machines in a single programmable device. Its 125,000 system gates and 36,864 internal SRAM bits are useful for designs that require more combinational logic and board-level connectivity than a small microcontroller provides, without moving to a larger FPGA. Use the available I/Os for synchronous and asynchronous interface signals, and select I/O standards supported by the exact device. Timing closure, clock-domain relationships, serial interfaces, and available PLL resources must be confirmed before assigning the device.

🔧

Test and Measurement Instrumentation

In instrumentation, the A3P125-PQ208I can implement acquisition sequencing, trigger logic, digital calibration, and control functions while its 133 I/Os connect sensors, ADC interfaces, relay drivers, and displays. The nonvolatile flash configuration supports repeatable field operation, while the 3,072 logic cells allow parallel datapath and control functions to share one FPGA. Designers should use the manufacturer timing and power guidance to define clock constraints, I/O voltage, termination, and drive strength. Signal-integrity planning is especially important when the device interfaces with high-speed analog-to-digital converters or long external buses.

🖥️

ASIC Replacement and Design Consolidation

The A3P125-PQ208I is appropriate for low-to-medium-volume logic consolidation where an ASIC-like fixed function can instead be implemented in reprogrammable flash-based logic. Its 3,072 logic cells and 125,000 system gates support control paths, datapaths, and board interfaces in one package, while 36,864 internal SRAM bits provide local storage for buffers and state. The device can also support design evolution because stored configurations may be revised during qualification or production. Engineering should validate timing closure, resource utilization, pin assignments, configuration security, and any software or firmware dependencies before committing to a production release.

🔧

Embedded Protocol and Interface Bridge

The A3P125-PQ208I can serve as a bridge between legacy parallel interfaces and newer serial or mixed-signal systems because it combines substantial programmable logic with 133 user I/Os. Examples include translating bus formats, buffering asynchronous data, generating control strobes, and implementing test or fault logic around an existing processor. The 36,864-bit internal SRAM allows local FIFO-like structures where required, although the actual usable memory organization must be checked in the device documentation. Pin reassignment, I/O standard support, clock-domain crossing, and asynchronous timing constraints are the principal checks before using this device as a drop-in logic companion.

✈️

Aerospace and Defense Control Logic

The A3P125 family is suitable for evaluating nonvolatile FPGA logic in control, sequencing, and interface applications where programmable updates and a substantial number of I/Os are useful. The A3P125-PQ208I provides 3,072 logic cells, 125,000 system gates, and 133 user I/Os for integrating command decoding, telemetry handling, or redundant monitoring functions. Flash-based configuration enables the stored logic to remain available after power loss. Qualification for an aerospace program cannot be inferred from the base ordering code alone: designers must confirm the exact temperature grade, screening, radiation, reliability, export-control, and long-term availability requirements with the manufacturer.

What is the A3P125-PQ208I?
The A3P125-PQ208I is a Microchip Technology ProASIC3 flash-based FPGA with 125,000 system gates, 3,072 logic cells, 36,864 internal SRAM bits, and 133 user I/Os. The manufacturer product page identifies the A3P125 as a low-density ProASIC3 device offering reprogrammability and a single-chip implementation. It is packaged in a 208-pin BFQFP measuring 28 mm by 28 mm with a 0.50 mm pitch.
How many logic cells and gates does the A3P125-PQ208I have?
The A3P125-PQ208I provides 3,072 logic cells and 125,000 system gates. These figures describe the programmable capacity of the ProASIC3 device and are reported on Microchip's A3P125 product page and in the manufacturer product listing. Capacity is not interchangeable with performance: clock targets, routing, memory, I/O standards, and timing closure must still be evaluated against the design requirements.
What package does the A3P125-PQ208I use?
The A3P125-PQ208I uses a 208-pin BFQFP plastic QFP package. The listed package dimensions are 28 mm by 28 mm, with a height of 3.40 mm and a terminal pitch of 0.50 mm. According to Microchip's A3P125 documentation, package dimensions and pin assignments must be taken from the package drawing associated with the selected ordering code.
Is the A3P125-PQ208I pin compatible with A3P250 devices?
The A3P125 can be used as a lower-density migration option for some A3P250 designs when the package and relevant pins remain compatible. Microchip's A3P250 migration application note specifically covers A3P250, A3P125, A3P060, and A3P030 and focuses on package-based pin compatibility. It does not mean every A3P250 design can be migrated unchanged, so users should check pin functions, resources, timing, and I/O standards.
What can replace the A3P125-PQ208I?
The closest ordering-code alternatives are the A3P125-PQ208, A3P125-PQG208, and A3P125-PQG208I, all associated with the 208-pin ProASIC3 package family. Their suitability depends on the exact qualification, temperature, and commercial ordering requirements. The A3P125-PQ208IY and A3P125-PQ208YI may also be relevant after their device-specific temperature and package details are checked. No unqualified cross-manufacturer drop-in was confirmed.
Is A3P125-PQ208I the same as A3P125-PQG208I?
The A3P125-PQ208I and A3P125-PQG208I share the ProASIC3 A3P125 device and 208-pin QFP format, but their complete ordering codes must be compared before substitution. The PQ and PQG distinctions can reflect package, grade, or ordering-code differences, and the available commercial result identifies PQG208I as discontinued. Use Microchip's ordering information and device documentation to confirm qualification, temperature, marking, and lifecycle requirements.
What is the best Microchip Technology equivalent for A3P125-PQ208I?
The best-supported equivalent is an A3P125 ordering code that retains the 208-pin footprint and the required device grade. Microchip's A3P125 product family and the migration application note support A3P125 as a lower-density option within the ProASIC3 portfolio. Because available commercial records use several 208-pin ordering codes, the exact suffix must be selected using temperature, qualification, lifecycle, and marking requirements rather than package similarity alone.
Where to download the A3P125-PQ208I datasheet PDF?
The authoritative starting point is Microchip Technology's A3P125 product page at https://www.microchip.com/en-us/product/A3P125. From that page, select the ProASIC3 data sheet, package drawing, ordering information, and migration documents relevant to the A3P125. The A3P250 migration application note also provides useful context for package-compatible movement among ProASIC3 density options.
Where can I find the A3P125-PQ208I pinout?
The pinout should be taken from the 208-pin package drawing and pin-description material associated with Microchip's A3P125 documentation. The device is listed as a 208-pin BFQFP with 0.50 mm pitch. Because the detailed pin table is not reproduced on this page, assign PCB signals directly from the manufacturer package drawing and verify every power, ground, configuration, and user I/O connection.
How much SRAM and user I/O does the A3P125-PQ208I provide?
The A3P125-PQ208I provides 36,864 bits of internal SRAM and 133 user I/Os according to the Microchip product listing. These resources support buffers, state storage, control logic, and external connections. Available memory organization, dedicated configuration pins, and the number of usable I/Os for a specific design should be confirmed in the device pin table and programming documentation.
Is the A3P125-PQ208I suitable for industrial control systems?
The A3P125-PQ208I is suitable for many industrial control functions because it combines 3,072 logic cells, 133 I/Os, and nonvolatile flash configuration in a single programmable device. Its 208-pin package provides extensive connectivity for sensors, actuators, communications, and control logic. Final suitability depends on the required I/O voltage, environmental grade, timing, functional safety requirements, and operating temperature range.
What is the power consumption of the A3P125-PQ208I?
The available manufacturer overview does not provide a single power-consumption value for the A3P125-PQ208I, so no numerical figure should be assumed. Power depends on core voltage, I/O voltage, configuration state, switching activity, clock rate, and enabled peripherals. Review the ProASIC3 power datasheet or hardware design guidance for the selected clocking, I/O, and voltage configuration before completing thermal and power-budget calculations.
Where can I buy the A3P125-PQ208I and what is its lead time?
Use the Request a Quote form on this page to request the current price, stock status, minimum order quantity, and lead time for the exact A3P125-PQ208I ordering code. The distributor result states that the part can ship today, but inventory and delivery schedules can change. Requiring the complete suffix in the quotation helps avoid confusion with related A3P125 208-pin ordering codes.
Is the A3P125-PQ208I currently active?
The A3P125-PQ208I is listed as a Microchip Technology ProASIC3 FPGA available through a current distributor product record, and the A3P125 remains part of the manufacturer's ProASIC3 offering. Related ordering codes such as A3P125-PQG208I are specifically described as discontinued in another commercial result. Lifecycle status should therefore be confirmed by MPN at quotation time, particularly for long-running industrial programs.
What are the key specifications engineers should know about A3P125-PQ208I?
The principal A3P125-PQ208I specifications are 125,000 system gates, 3,072 logic cells, 36,864 internal SRAM bits, 133 user I/Os, and a 208-pin BFQFP package. Microchip describes the underlying implementation as 130 nm flash-based CMOS with a seven-layer, six-copper-layer process. The device is suited to embedded control, communications, instrumentation, and ASIC-like programmable logic where nonvolatile configuration and substantial I/O connectivity are valuable.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা A3P125-PQ208I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the A3P125-PQ208I when the design needs 3,072 logic cells, 125,000 system gates, 36,864 internal SRAM bits, and 133 user I/Os in a 208-pin flash-based QFP. It is a strong fit for industrial control, communications, instrumentation, and ASIC-style consolidation where nonvolatile configuration and extensive board connectivity matter. Select A3P125-PQ208 when the I-grade designation is unnecessary and the procurement organization prefers that ordering code. Evaluate A3P125-PQG208 only after confirming the exact package and grade details. A3P125-PQG208I should be approached cautiously because a commercial record identifies it as discontinued. The PQ208IY and PQ208YI variants are useful when their exact temperature and qualification characteristics match the program. For all candidates, verify the pin table, supported I/O standards, timing, power limits, configuration method, and lifecycle before approving a substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য A3P125-PQ208 A3P125-PQG208 A3P125-PQG208I A3P125-PQ208IY A3P125-PQ208YI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 208-BFQFP 208-BFQFP 208-BFQFP 208-BFQFP 208-BFQFP 208-BFQFP
System Gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates 125,000 gates
Logic Cells / Logic Blocks 3,072 logic cells 3,072 logic cells 3,072 logic cells 3,072 logic cells 3,072 logic cells 3,072 logic cells
Configuration Technology Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash
Package Dimensions 28 mm x 28 mm, 0.50 mm pitch 28 mm x 28 mm, 0.50 mm pitch 28 mm x 28 mm, 0.50 mm pitch 28 mm x 28 mm, 0.50 mm pitch 28 mm x 28 mm, 0.50 mm pitch 28 mm x 28 mm, 0.50 mm pitch

মূল পার্থক্যসমূহ

  • Exact 125,000-gate ProASIC3 resource configuration (বনামA3P125-PQ208)
  • Industrial I ordering designation with an active commercial listing (বনামA3P125-PQG208I)
  • Nonvolatile flash configuration in a 208-pin surface-mount package (বনামA3P125-PQ208YI)
  • 133 user I/Os support high board-level connectivity (বনামA3P125-PQ208IY)

ডিজাইন নোট

Treat the A3P125-PQ208I as a fine-pitch 208-pin QFP rather than a generic 208-pin footprint. Use the manufacturer package drawing to define pad dimensions, solder-mask clearance, and paste apertures for the 0.50 mm pitch. Confirm courtyard, thermal relief, and assembly tolerances against the PCB fabricator's capability. Signal and power assignments should come directly from the A3P125 package documentation because ordering-code differences do not by themselves guarantee identical pin functions.

Plan the power tree before layout by assigning core and I/O supply domains from the exact device documentation. Decoupling should follow the capacitance, voltage, and ESR guidance associated with the selected supply rails, with short connections and adequate ground reference. Because the public product overview does not state maximum current, static power, or dynamic power, determine those limits from Microchip's power guidance and include startup, I/O-load, and clocking scenarios in the budget.

Assign clocks and high-speed interfaces only after checking the A3P125's supported I/O standards and timing constraints. Keep clock traces short, provide a continuous ground reference, and use the device's recommended input, output, and termination techniques. For migrated designs, compare pin functions and edge relationships rather than relying only on package dimensions; a matching footprint does not guarantee that a clock, configuration pin, or voltage-sensitive I/O can be connected identically.

Do not substitute an A3P125 ordering code solely because it also contains 208 pins. Confirm the exact ordering information, temperature grade, qualification status, device marking, lifecycle status, and configuration compatibility for every alternative. Microchip's A3P250 migration note supports pin-compatibility analysis within the ProASIC3 family, but it still requires design-level timing, resource, and I/O verification. A related PQG208I record is identified as discontinued, so procurement planning must use the full suffix.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. Confirm environmental and qualification status with Microchip Technology using the complete MPN.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

a3p125 vqg100i a3p125 pqg208i a3p125 pqg208 a3p125 tqg144 a3p125 vqg100 a3p125 fgg144 actel a3p125 A3P125-PQ208I datasheet A3P125-PQ208I pinout A3P125-PQ208I equivalent A3P125-PQ208I replacement A3P125-PQ208I price Microchip A3P125-PQ208I A3P125-PQ208I 208 pin QFP

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology A3P125-PQ208I A3P125 ProASIC3 A3P125-PQ208 A3P125-PQG208 A3P125-PQG208I A3P125-PQ208IY A3P125-PQ208YI FPGA CPLD programmable logic semiconductor flash-based CMOS field-programmable gate array logic cell system gate nonvolatile flash Instant On 130 nm CMOS seven-layer metal six copper layers internal SRAM user I/O 208-BFQFP QFP package 0.50 mm pitch surface mount industrial control communications instrumentation ASIC replacement RoHS REACH AEC-Q100
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন