A3P600L-FG256 - 600K Low-Power Flash FPGA | Microchip
MPN: A3P600L-FG256 ✓ সক্রিয়A3P600L-FG256 সারাংশ
A Flash FPGA is a programmable logic device that stores its configuration in non-volatile memory. Unlike SRAM-based FPGAs, the ProASIC3L architecture retains its programmed configuration after power removal, eliminating separate configuration PROM or loader circuitry. Within the product hierarchy, A3P600L belongs to the Flash FPGA family, then to the ProASIC3L family, then to programmable logic devices and semiconductors.
The A3P600L-FG256 combines 600,000 equivalent gates with as many as 350 MHz performance in the standard FG256 configuration. Its 177 I/O sites support integration of control logic, data acquisition, communications, and general-purpose digital functions. Non-volatile configuration, FlashFreeze technology and on-chip programming support reduce system complexity by keeping the FPGA operational without continuous configuration reloads.
The ProASIC3L architecture provides reprogrammability and deterministic logic implementation for industrial, communications, instrumentation and embedded-control systems. Its 1.2 V core operation is consistent with modern low-voltage digital systems. The 256-ball package also uses a 1 mm ball pitch in a 17 mm by 17 mm body, allowing high pin density without requiring a very large board area.
Typical uses include industrial automation controllers, serial-interface bridges, protocol converters, data-capture systems, embedded instrumentation and low-power embedded processing. The 177 available I/O sites are especially useful when several buses, status signals and external interfaces must coexist with the programmable logic fabric. FlashFreeze operation can support systems that require controlled low-power states while preserving configuration.
PCB design should follow the manufacturer's package, power, decoupling and high-speed layout guidance. The 1.2 V core rail should be supplied with suitable local decoupling, while programming and configuration signals require clean routing. Because a 256-ball BGA has a 1 mm pitch, board assembly and inspection capabilities should be confirmed before committing to the package.
This product page combines the manufacturer's ProASIC3L family information, package details, verified ordering data and practical engineering guidance. It also organizes same-package replacement options and comparison criteria so engineers can assess timing grade, temperature grade, power architecture and lifecycle requirements before designing a board.
এর জন্য ড্রপ-ইন বিকল্প A3P600L-FG256 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible A3P600L-FG256 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Process Technology, Configuration Memory, Core Supply Voltage, Family.
A3P600L-FG256I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →A3P600L-FG256Y
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P600L-FGG256I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P600L-1FGG256Y
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P600-FG256I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →A3P600-FG256
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →A3P600L-FG256 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| FPGA Family | ProASIC3L |
| Equivalent Logic Gates | 600,000 gates |
| Configurable Logic Blocks | 13,824 CLBs |
| Maximum I/O | 177 I/O |
| Maximum Performance | 350 MHz |
| Core Voltage | 1.2 V |
| Core Voltage Range | 1.2 V to 1.5 V |
| Process Technology | 130 nm CMOS |
| Configuration Memory | Non-volatile Flash |
| প্যাকেজ | 256-ball PBGA |
| Package Body Size | 17 mm x 17 mm |
| Package Height | 1.60 mm |
| Ball Pitch | 1 mm |
| মাউন্টিং টাইপ | Surface mount |
| Low-Power Architecture | ProASIC3L FlashFreeze architecture |
A3P600L-FG256 1.60 mm পিন কনফিগারেশন গাইড
A3P600L-FG256 (1.60 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি A3P600L-FG256.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
A3P600L-FG256 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, Data Acquisition and Signal Conditioning, Communication Protocol Converter, Embedded Instrumentation, Network and Interface Aggregation, Low-Power Embedded Control.
Industrial Automation Controller
The A3P600L-FG256 is suitable for a compact industrial controller that combines sequencing, machine-state monitoring and several communication interfaces. Its 13,824 configurable logic blocks provide enough parallelism for control algorithms, while 177 I/O sites allow digital inputs, outputs and serial interfaces to coexist in one device. The 1.2 V core supports low-voltage logic families commonly used in modern control hardware. Because the ProASIC3L configuration is stored in non-volatile Flash, the controller can retain its programmed logic through power cycles without a separate configuration PROM. FlashFreeze operation can also reduce activity-related power consumption when the system must preserve state during inactive periods.
সুপারিশকৃত
Data Acquisition and Signal Conditioning
The A3P600L-FG256 can implement parallel acquisition logic, digital filtering, thresholding and data formatting in a single programmable device. With 13,824 configurable logic blocks, it can balance multiple datapaths instead of forcing a design into a small microcontroller. The 177 I/O sites provide substantial connectivity for parallel converters, memory interfaces and control signals. Its listed 350 MHz capability creates ample timing margin for many two- or multi-cycle acquisition pipelines. Non-volatile Flash configuration is useful in unattended instruments because the acquisition algorithm remains stored after power removal, reducing the need for an external configuration loader and allowing immediate restart into a defined acquisition state.
সুপারিশকৃত
Communication Protocol Converter
A3P600L-FG256 is well suited to bridging serial, parallel and packet-oriented interfaces by running multiple conversion paths concurrently. The 600,000-equivalent-gate device can host framing logic, FIFOs, checksum engines and interface controllers, while 177 I/O sites support external transceivers and control signals. The 1.2 V core enables integration with contemporary low-voltage interface devices. Flash configuration preserves routing tables, protocol state machines and optional bitstreams across field updates, while FlashFreeze behavior can help maintain low power in links that idle intermittently. Timing closure must be performed for the selected speed grade, and the same-package alternatives require checking of their suffix-specific performance limits.
সুপারিশকৃত
Embedded Instrumentation
The A3P600L-FG256 can serve as the programmable control core in an embedded measurement instrument when deterministic parallel logic and extensive I/O are more valuable than a fixed microcontroller architecture. Its 13,824 configurable logic blocks can implement acquisition pipelines, calibration tables, motor or relay sequencing and local display-control logic. The 256-ball PBGA exposes 177 user I/O sites, reducing the need for external I/O expanders in densely connected designs. A 1.2 V core and 130 nm Flash FPGA architecture support integration into mixed-signal systems where control logic sits alongside converters and amplifiers. Non-volatile configuration is particularly useful for instruments that must retain calibration or sequencing logic after unexpected power loss.
সুপারিশকৃত
Network and Interface Aggregation
The A3P600L-FG256 can consolidate several interface engines, status registers and buffer-management functions in a single FPGA. With 600,000 equivalent gates and 177 I/O sites, it accommodates parallel datapaths, memory interfaces and external PHY connections without splitting the design across multiple programmable devices. The listed 350 MHz maximum supports clocked logic operating below the device limit, although the final system timing depends on routing, I/O standards and the selected grade. Non-volatile Flash configuration allows network adapters and protocol bridges to preserve their bitstream and control tables without an external boot PROM. The 1 mm pitch PBGA also demands careful fanout, via planning and assembly control during PCB layout.
সুপারিশকৃত
Low-Power Embedded Control
The A3P600L-FG256 fits embedded-control designs that need programmable logic while retaining configuration during low-power states. The ProASIC3L family's FlashFreeze architecture provides a way to freeze logic activity without using a conventional SRAM-only FPGA's external configuration reload path. Its 13,824 configurable logic blocks can execute control sequences, monitor interlocks and coordinate actuators, while 177 I/O sites provide direct access to sensors and discrete outputs. The 1.2 V core reduces the switching burden associated with higher-voltage programmable logic. Actual standby power and wake behavior depend on the implemented clocking, I/O activity and FlashFreeze configuration, so these conditions should be measured at the board level during design validation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা A3P600L-FG256 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | A3P600L-FG256I | A3P600L-FG256Y | A3P600L-FGG256I | A3P600-FG256 | A3P600-FG256I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-ball PBGA | 256-ball PBGA | 256-ball PBGA | 256-ball PBGA | 256-ball PBGA | 256-ball PBGA |
| FPGA Family | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3 | ProASIC3 |
| Equivalent Logic Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| I/O Sites | 177 I/O | 177 I/O | 177 I/O | 177 I/O | 177 I/O | 177 I/O |
| Configuration Memory | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash |
| Low-Power Architecture | ProASIC3L with FlashFreeze | ProASIC3L with FlashFreeze | ProASIC3L with FlashFreeze | ProASIC3L with FlashFreeze | Standard ProASIC3 | Standard ProASIC3 |
মূল পার্থক্যসমূহ
- Low-power ProASIC3L architecture with FlashFreeze (বনামA3P600-FG256)
- High logic density with extensive user I/O (বনামA3P600L-FG256I)
- Single-device consolidation for 256-ball designs (বনামA3P600-FG256I)
ডিজাইন নোট
The A3P600L-FG256 uses a 1.2 V core supply. Place the manufacturer's recommended decoupling capacitors close to the corresponding power balls and keep the core and I/O supply return paths continuous through the BGA footprint. Verify each rail's allowable voltage, sequencing and noise limits against the manufacturer electrical-characteristics table before finalizing the power tree. Avoid routing high-current digital return paths beneath sensitive I/O or clocking nets.
The FG256 package uses a 1 mm ball pitch on a 17 mm by 17 mm body, so PCB escape routing requires careful via placement and controlled impedance. Follow the manufacturer package drawing and recommended land pattern for pad, solder-mask and paste geometry. Confirm the board builder's minimum line width, via diameter, annular ring and solder-mask bridge capability. Also plan test access and programming connectivity before the BGA footprint becomes fixed.
Assign clock, programming and high-speed interface nets according to the manufacturer layout guidance, and provide a continuous return path beneath each routed clock or data trace. Place external memory, interface transceivers and decoupling in locations that minimize loop area and preserve signal access to the BGA balls. After routing, run signal-integrity and timing simulations with the actual PCB stack-up, including the effects of the 1 mm-pitch package escape region.
Do not treat A3P600 and A3P600L ordering codes as identical without checking the family-specific power behavior. Both can use a 256-ball package and 600,000 equivalent gates, but the ProASIC3L option is the relevant choice when low-power and FlashFreeze behavior are required. Also verify the suffix-specific speed, temperature, package-ball and qualification requirements before releasing a production order or reusing an existing design.
কমপ্লায়েন্স তথ্য
The manufacturer family information identifies an industrial and commercial Flash FPGA product line, but no explicit RoHS, REACH, lead-free, halogen-free or conflict-minerals declaration was found in the cited product material. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified device.