Microchip Technology

A3P600L-FG256 - 600K Low-Power Flash FPGA | Microchip

Teilenummer: A3P600L-FG256 ✓ Aktiv
1.2 V Vdss 256-ball PBGA Package Non-volatile Flash Memory
MOQ: 1 |

A3P600L-FG256 Übersicht

The Microchip A3P600L-FG256 is a low-power, non-volatile Flash FPGA in the ProASIC3L family, providing 600,000 equivalent logic gates, 13,824 configurable logic blocks and 177 I/O sites in a 256-ball PBGA package. The device combines a 1.2 V core with a 130 nm CMOS process and supports the ProASIC3 family architecture for reprogrammable digital logic.

A Flash FPGA is a programmable logic device that stores its configuration in non-volatile memory. Unlike SRAM-based FPGAs, the ProASIC3L architecture retains its programmed configuration after power removal, eliminating separate configuration PROM or loader circuitry. Within the product hierarchy, A3P600L belongs to the Flash FPGA family, then to the ProASIC3L family, then to programmable logic devices and semiconductors.

The A3P600L-FG256 combines 600,000 equivalent gates with as many as 350 MHz performance in the standard FG256 configuration. Its 177 I/O sites support integration of control logic, data acquisition, communications, and general-purpose digital functions. Non-volatile configuration, FlashFreeze technology and on-chip programming support reduce system complexity by keeping the FPGA operational without continuous configuration reloads.

The ProASIC3L architecture provides reprogrammability and deterministic logic implementation for industrial, communications, instrumentation and embedded-control systems. Its 1.2 V core operation is consistent with modern low-voltage digital systems. The 256-ball package also uses a 1 mm ball pitch in a 17 mm by 17 mm body, allowing high pin density without requiring a very large board area.

Typical uses include industrial automation controllers, serial-interface bridges, protocol converters, data-capture systems, embedded instrumentation and low-power embedded processing. The 177 available I/O sites are especially useful when several buses, status signals and external interfaces must coexist with the programmable logic fabric. FlashFreeze operation can support systems that require controlled low-power states while preserving configuration.

PCB design should follow the manufacturer's package, power, decoupling and high-speed layout guidance. The 1.2 V core rail should be supplied with suitable local decoupling, while programming and configuration signals require clean routing. Because a 256-ball BGA has a 1 mm pitch, board assembly and inspection capabilities should be confirmed before committing to the package.

This product page combines the manufacturer's ProASIC3L family information, package details, verified ordering data and practical engineering guidance. It also organizes same-package replacement options and comparison criteria so engineers can assess timing grade, temperature grade, power architecture and lifecycle requirements before designing a board.

Drop-in-Alternativen für A3P600L-FG256 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit A3P600L-FG256 (gleiche Bauform und Footprint) – abweichend in Package, Process Technology, Configuration Memory, Core Supply Voltage, Family.

Microchip Technology
Package: 256-LBGA / FBGA (17x17 mm, 1 mm pitch)
Process Technology: 130-nm, 7-layer metal (6 copper), flash-based CMOS
Core Supply Voltage: 1.425 V to 1.575 V (1.5 V nominal)
Vergleichen mit A3P600L-FG256 →
Microchip Technology
Package: 256-LBGA (FBGA-256)
Core Supply Voltage: 1.5 V
Vergleichen mit A3P600L-FG256 →
Microchip Technology
Package: 256-ball FBGA (LBGA)
Process Technology: 130 nm flash
Configuration Memory: On-chip flash (nonvolatile, single-chip)
Vergleichen mit A3P600L-FG256 →

A3P600L-FG256I

✅ Drop-In
Microchip Technology
📦 256-ball PBGA
ProASIC3L · 600000 gates · 177 · 110592 bits · 1.2 V · 130 nm flash · On-chip flash (nonvolatile, single-chip) · 256-ball FBGA (LBGA)

Preis auf Anfrage

Datenblatt ansehen →

A3P600L-FG256Y

✅ Drop-In
📦 256-ball PBGA
Same ProASIC3L device and 256-ball footprint with 13,824 logic cells and 600,000 equivalent gates; the Y suffix changes the specified temperature grade.

📋 Referenzalternative (nicht im Katalog)

A3P600L-FGG256I

✅ Drop-In
📦 256-ball PBGA
Same ProASIC3L capacity and 256-ball format; FGG ordering code changes the package/ball designation and temperature suffix while retaining 600,000 equivalent gates.

📋 Referenzalternative (nicht im Katalog)

A3P600L-1FGG256Y

✅ Drop-In
📦 256-ball PBGA
Same ProASIC3L family and 256-ball format with 13,824 logic cells and 600,000 equivalent gates; speed and temperature suffixes differ from the target ordering code.

📋 Referenzalternative (nicht im Katalog)

A3P600-FG256I

✅ Drop-In
Microchip Technology
📦 256-ball PBGA
Field Programmable Gate Array (FPGA) · ProASIC3 · 600,000 · 13,824 VersaTiles (7K logic elements per Mouser) · 110,592 · 177 · 1.5 V

Preis auf Anfrage

Datenblatt ansehen →

A3P600-FG256

✅ Drop-In
Microchip Technology
📦 256-ball PBGA
ProASIC3 (Flash FPGAs) · 600000 · 7K LEs (VersaTiles) · 110592 bits (True Dual-Port) · 177 · 1.425 V to 1.575 V (1.5 V nominal) · 130-nm, 7-layer metal (6 copper), flash-based CMOS · Approx. 231 MHz

Preis auf Anfrage

Datenblatt ansehen →

A3P600L-FG256 Grenzwerte & elektrische Eigenschaften

FPGA Family ProASIC3L
Equivalent Logic Gates 600,000 gates
Configurable Logic Blocks 13,824 CLBs
Maximum I/O 177 I/O
Maximum Performance 350 MHz
Core Voltage 1.2 V
Core Voltage Range 1.2 V to 1.5 V
Process Technology 130 nm CMOS
Configuration Memory Non-volatile Flash
Gehäuse 256-ball PBGA
Package Body Size 17 mm x 17 mm
Package Height 1.60 mm
Ball Pitch 1 mm
Montageart Surface mount
Low-Power Architecture ProASIC3L FlashFreeze architecture

A3P600L-FG256 1.60 mm Pinbelegungsleitfaden

Pinbelegung für A3P600L-FG256 (1.60 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für A3P600L-FG256 im 1.60 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für A3P600L-FG256.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

A3P600L-FG256 ist geeignet für 6 Anwendungs: Industrial Automation Controller, Data Acquisition and Signal Conditioning, Communication Protocol Converter, Embedded Instrumentation, Network and Interface Aggregation, Low-Power Embedded Control.

🏭

Industrial Automation Controller

The A3P600L-FG256 is suitable for a compact industrial controller that combines sequencing, machine-state monitoring and several communication interfaces. Its 13,824 configurable logic blocks provide enough parallelism for control algorithms, while 177 I/O sites allow digital inputs, outputs and serial interfaces to coexist in one device. The 1.2 V core supports low-voltage logic families commonly used in modern control hardware. Because the ProASIC3L configuration is stored in non-volatile Flash, the controller can retain its programmed logic through power cycles without a separate configuration PROM. FlashFreeze operation can also reduce activity-related power consumption when the system must preserve state during inactive periods.

📊

Data Acquisition and Signal Conditioning

The A3P600L-FG256 can implement parallel acquisition logic, digital filtering, thresholding and data formatting in a single programmable device. With 13,824 configurable logic blocks, it can balance multiple datapaths instead of forcing a design into a small microcontroller. The 177 I/O sites provide substantial connectivity for parallel converters, memory interfaces and control signals. Its listed 350 MHz capability creates ample timing margin for many two- or multi-cycle acquisition pipelines. Non-volatile Flash configuration is useful in unattended instruments because the acquisition algorithm remains stored after power removal, reducing the need for an external configuration loader and allowing immediate restart into a defined acquisition state.

🌐

Communication Protocol Converter

A3P600L-FG256 is well suited to bridging serial, parallel and packet-oriented interfaces by running multiple conversion paths concurrently. The 600,000-equivalent-gate device can host framing logic, FIFOs, checksum engines and interface controllers, while 177 I/O sites support external transceivers and control signals. The 1.2 V core enables integration with contemporary low-voltage interface devices. Flash configuration preserves routing tables, protocol state machines and optional bitstreams across field updates, while FlashFreeze behavior can help maintain low power in links that idle intermittently. Timing closure must be performed for the selected speed grade, and the same-package alternatives require checking of their suffix-specific performance limits.

🔧

Embedded Instrumentation

The A3P600L-FG256 can serve as the programmable control core in an embedded measurement instrument when deterministic parallel logic and extensive I/O are more valuable than a fixed microcontroller architecture. Its 13,824 configurable logic blocks can implement acquisition pipelines, calibration tables, motor or relay sequencing and local display-control logic. The 256-ball PBGA exposes 177 user I/O sites, reducing the need for external I/O expanders in densely connected designs. A 1.2 V core and 130 nm Flash FPGA architecture support integration into mixed-signal systems where control logic sits alongside converters and amplifiers. Non-volatile configuration is particularly useful for instruments that must retain calibration or sequencing logic after unexpected power loss.

🖥️

Network and Interface Aggregation

The A3P600L-FG256 can consolidate several interface engines, status registers and buffer-management functions in a single FPGA. With 600,000 equivalent gates and 177 I/O sites, it accommodates parallel datapaths, memory interfaces and external PHY connections without splitting the design across multiple programmable devices. The listed 350 MHz maximum supports clocked logic operating below the device limit, although the final system timing depends on routing, I/O standards and the selected grade. Non-volatile Flash configuration allows network adapters and protocol bridges to preserve their bitstream and control tables without an external boot PROM. The 1 mm pitch PBGA also demands careful fanout, via planning and assembly control during PCB layout.

⚡

Low-Power Embedded Control

The A3P600L-FG256 fits embedded-control designs that need programmable logic while retaining configuration during low-power states. The ProASIC3L family's FlashFreeze architecture provides a way to freeze logic activity without using a conventional SRAM-only FPGA's external configuration reload path. Its 13,824 configurable logic blocks can execute control sequences, monitor interlocks and coordinate actuators, while 177 I/O sites provide direct access to sensors and discrete outputs. The 1.2 V core reduces the switching burden associated with higher-voltage programmable logic. Actual standby power and wake behavior depend on the implemented clocking, I/O activity and FlashFreeze configuration, so these conditions should be measured at the board level during design validation.

Zusammenfassung der empfohlenen Produkte

A3P600L-FG256I Microchip Technology Verwendet in: Industrial Automation Controller, Communication Protocol Converter, Low-Power Embedded Control A3P600L-FG256Y Alternate ProASIC3L grade with the same 256-ball resource configuration Verwendet in: Industrial Automation Controller, Network and Interface Aggregation A3P600-FG256 Microchip Technology Verwendet in: Data Acquisition and Signal Conditioning, Network and Interface Aggregation A3P600-FG256I Microchip Technology Verwendet in: Data Acquisition and Signal Conditioning, Embedded Instrumentation A3P600L-FGG256I ProASIC3L configuration with alternate FGG256 ordering code Verwendet in: Communication Protocol Converter, Low-Power Embedded Control A3P600L-1FGG256Y Same-family ProASIC3L speed and temperature option Verwendet in: Embedded Instrumentation
What is the Microchip A3P600L-FG256?
The Microchip A3P600L-FG256 is a ProASIC3L low-power Flash FPGA with 600,000 equivalent gates, 13,824 configurable logic blocks and up to 177 I/O sites. According to the manufacturer datasheet, it uses non-volatile Flash configuration, operates from a 1.2 V core supply and is packaged in a 256-ball PBGA. It is intended for designs requiring dense programmable logic without a separate configuration memory device.
How many logic gates and I/O sites does A3P600L-FG256 have?
The A3P600L-FG256 provides 600,000 equivalent logic gates, 13,824 configurable logic blocks and 177 I/O sites. The manufacturer datasheet identifies the device as part of the ProASIC3L Flash FPGA family. These resources support parallel control logic, data paths, bus interfaces and communication engines within one programmable device, making the part useful for consolidated control and interface designs.
What is the maximum clock frequency of A3P600L-FG256?
The A3P600L-FG256 is listed with a maximum clock frequency of 350 MHz for the standard FG256 configuration. According to the manufacturer product information, speed-grade variants and package options can have different maximum operating frequencies, so the exact ordering code must be checked before using 350 MHz in a timing closure. The number is a device capability rather than a guaranteed system-level performance.
What package and pin pitch are used by A3P600L-FG256?
The A3P600L-FG256 uses a 256-ball plastic BGA package measuring 17 mm by 17 mm, with a 1 mm ball pitch and a stated package height of 1.60 mm. The manufacturer package information identifies it as PBGA256. The package key used for pin and footprint review is therefore the 256-ball BGA, but exact ball assignments should be taken from the manufacturer pinout table.
Where can I download the A3P600L-FG256 datasheet PDF?
The official A3P600L manufacturer product page is the best starting point for the A3P600L-FG256 datasheet PDF and related programming documentation. According to the manufacturer product page, the device belongs to the ProASIC3L low-power Flash FPGA family. Use the same family documentation for electrical characteristics, package drawings, pin definitions, programming and FlashFreeze behavior, while confirming the exact FG256 ordering code.
Where can I find the A3P600L-FG256 pinout?
The A3P600L-FG256 pinout is found in the manufacturer datasheet's FG256 package pin-description and package-outline tables. The device has 256 terminals in a PBGA arrangement, but the complete ball-number-to-signal mapping cannot be reproduced reliably without the official package table. Use the manufacturer pin-description table when assigning PCB nets, power balls, configuration pins and programmable I/O.
Does the A3P600L-FG256 retain its configuration when power is removed?
Yes. The A3P600L-FG256 uses non-volatile Flash configuration memory, so its programmed configuration remains after power is removed. According to the manufacturer datasheet, this eliminates the need for a separate configuration PROM in many designs. The device also includes FlashFreeze capabilities for controlling power consumption while preserving the stored configuration.
What can replace an A3P600L-FG256 on the same 256-ball PCB?
The closest documented replacements are same-package ProASIC3 and ProASIC3L variants such as A3P600L-FG256I, A3P600L-FG256Y and A3P600L-FGG256I, subject to speed-grade and temperature-grade requirements. A3P600-FG256 and A3P600-FG256I use the same 256-ball format but are not ProASIC3L low-power devices. Confirm pin compatibility, voltage, timing, temperature and design-tool support before substitution.
A3P600L-FG256 vs A3P600-FG256: which is better for a low-power design?
The A3P600L-FG256 is generally the better choice for a low-power design because it belongs to the ProASIC3L family and supports FlashFreeze operation. The A3P600-FG256 is the standard ProASIC3 member in the same 256-ball format and offers a different power and feature trade-off. Both provide approximately 600,000 equivalent gates, so the decision should emphasize power behavior, timing, temperature grade and available design tools.
When should I choose A3P600L-FG256 over A3P600L-FG256I?
Choose A3P600L-FG256I when the board requires the documented industrial temperature-grade suffix and your qualification environment falls within that grade's limits. Choose the unsuffixed A3P600L-FG256 when its specified operating range covers the design and the industrial suffix is unnecessary. The manufacturer suffix and family documentation should be checked before locking the component into a regulated production design.
Is A3P600L-FG256 suitable for industrial automation and instrumentation?
Yes, the A3P600L-FG256 fits industrial automation and instrumentation when its voltage, timing and temperature qualifications match the system requirements. Its 13,824 configurable logic blocks support complex control and data-processing functions, while 177 I/O sites provide substantial interface capacity. Non-volatile Flash configuration also simplifies systems that cannot afford configuration reload after every power interruption.
Where to buy A3P600L-FG256 online and what is its current lead time?
Use the Request a Quote form on this XAIPART page to request A3P600L-FG256 pricing, stock confirmation, minimum order quantity and current lead time. The manufacturer product page remains the authoritative source for lifecycle and family information, but current channel availability can change. Submit the exact A3P600L-FG256 ordering code and required quantity so the quote reflects the correct device.
What is the price of A3P600L-FG256?
Current A3P600L-FG256 pricing is obtained through the Request a Quote form on this page because commercial terms and availability can vary with quantity and sourcing conditions. The form should be used for the exact FG256 ordering code, including any required temperature-grade or packaging suffix. Microchip product information identifies the device as an active member of the ProASIC3L family.
Is A3P600L-FG256 in stock?
Stock status for A3P600L-FG256 should be confirmed through the Request a Quote form on this page, where quantity and current channel availability can be checked for the exact ordering code. Manufacturer product information confirms that A3P600L remains part of the ProASIC3L product family, but family-level listing does not by itself guarantee stock for every package and grade combination.
What is the best cross-brand equivalent for A3P600L-FG256?
No cross-brand drop-in equivalent is established for the A3P600L-FG256 in the available cross-reference results. A true replacement must match the 256-ball footprint, 1.2 V core, 600,000-gate class, non-volatile configuration behavior, I/O assignments and timing requirements. Cross-brand FPGA devices with different architecture or package details should be treated as functional migrations requiring a complete pin and design-tool assessment, not drop-in substitutions.
What are the key specifications of A3P600L-FG256 that engineers should know?
The key specifications are 600,000 equivalent gates, 13,824 configurable logic blocks, 177 I/O sites, a 1.2 V core, up to 350 MHz listed performance, non-volatile Flash configuration and a 256-ball PBGA package. According to the manufacturer datasheet and package information, the device is built on a 130 nm CMOS process and uses a 1 mm ball pitch in a 17 mm by 17 mm package.

Technische Referenzdaten für A3P600L-FG256 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose A3P600L-FG256 when the design benefits from non-volatile Flash configuration, ProASIC3L low-power behavior and FlashFreeze control while retaining 600,000 equivalent gates and 177 I/O sites in a 256-ball PBGA. Choose A3P600L-FG256I when the industrial temperature suffix is required for the operating environment, or A3P600L-FG256Y when that documented grade better matches the qualification specification. A3P600L-FGG256I and A3P600L-1FGG256Y remain same-package ProASIC3L options, but their ordering suffixes must be checked for timing, ball designation and temperature requirements. Choose A3P600-FG256 or A3P600-FG256I only when the standard ProASIC3 architecture is acceptable and low-power FlashFreeze behavior is not required. Before substituting any option, verify pin assignments, I/O standards, speed grade, voltage, temperature range, programming support and timing closure.

Vergleich mit Alternativen

Parameter Dieses Produkt A3P600L-FG256I A3P600L-FG256Y A3P600L-FGG256I A3P600-FG256 A3P600-FG256I
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 256-ball PBGA 256-ball PBGA 256-ball PBGA 256-ball PBGA 256-ball PBGA 256-ball PBGA
FPGA Family ProASIC3L ProASIC3L ProASIC3L ProASIC3L ProASIC3 ProASIC3
Equivalent Logic Gates 600,000 gates 600,000 gates 600,000 gates 600,000 gates 600,000 gates 600,000 gates
I/O Sites 177 I/O 177 I/O 177 I/O 177 I/O 177 I/O 177 I/O
Configuration Memory Non-volatile Flash Non-volatile Flash Non-volatile Flash Non-volatile Flash Non-volatile Flash Non-volatile Flash
Low-Power Architecture ProASIC3L with FlashFreeze ProASIC3L with FlashFreeze ProASIC3L with FlashFreeze ProASIC3L with FlashFreeze Standard ProASIC3 Standard ProASIC3

Wichtigste Unterscheidungsmerkmale

  • Low-power ProASIC3L architecture with FlashFreeze (vs. A3P600-FG256)
  • High logic density with extensive user I/O (vs. A3P600L-FG256I)
  • Single-device consolidation for 256-ball designs (vs. A3P600-FG256I)

Designhinweise

The A3P600L-FG256 uses a 1.2 V core supply. Place the manufacturer's recommended decoupling capacitors close to the corresponding power balls and keep the core and I/O supply return paths continuous through the BGA footprint. Verify each rail's allowable voltage, sequencing and noise limits against the manufacturer electrical-characteristics table before finalizing the power tree. Avoid routing high-current digital return paths beneath sensitive I/O or clocking nets.

The FG256 package uses a 1 mm ball pitch on a 17 mm by 17 mm body, so PCB escape routing requires careful via placement and controlled impedance. Follow the manufacturer package drawing and recommended land pattern for pad, solder-mask and paste geometry. Confirm the board builder's minimum line width, via diameter, annular ring and solder-mask bridge capability. Also plan test access and programming connectivity before the BGA footprint becomes fixed.

Assign clock, programming and high-speed interface nets according to the manufacturer layout guidance, and provide a continuous return path beneath each routed clock or data trace. Place external memory, interface transceivers and decoupling in locations that minimize loop area and preserve signal access to the BGA balls. After routing, run signal-integrity and timing simulations with the actual PCB stack-up, including the effects of the 1 mm-pitch package escape region.

Do not treat A3P600 and A3P600L ordering codes as identical without checking the family-specific power behavior. Both can use a 256-ball package and 600,000 equivalent gates, but the ProASIC3L option is the relevant choice when low-power and FlashFreeze behavior are required. Also verify the suffix-specific speed, temperature, package-ball and qualification requirements before releasing a production order or reusing an existing design.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer family information identifies an industrial and commercial Flash FPGA product line, but no explicit RoHS, REACH, lead-free, halogen-free or conflict-minerals declaration was found in the cited product material. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified device.

Ähnliche Suchanfragen

A3P600L-FG256 datasheet A3P600L-FG256 pinout A3P600L-FG256 datasheet pdf A3P600L-FG256 equivalent A3P600L-FG256 replacement A3P600L-FG256 cross reference A3P600L-FG256 vs A3P600-FG256 A3P600L-FG256 footprint A3P600L-FG256 price A3P600L-FG256 stock Microchip A3P600L-FG256 A3P600L 256 PBGA pinout

Verwandte Bauteile & Begriffe

Microchip Technology Microsemi Corporation A3P600L-FG256 A3P600L-FG256I A3P600L-FG256Y A3P600L-FGG256I A3P600L-1FGG256Y A3P600-FG256 A3P600-FG256I ProASIC3L ProASIC3 Flash FPGA FPGA CPLD programmable logic device semiconductor non-volatile Flash configuration FlashFreeze 600,000 equivalent gates 13,824 configurable logic blocks 177 I/O 1.2 V core voltage 130 nm CMOS 256-ball PBGA
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen