Analog Devices

AD746JN - Dual 500ns Precision BiFET Op Amp | Analog Devices

MPN: AD746JN ✓ সক্রিয়
9 V to 36 V total Vdss 110 pA Id 8-pin PDIP, 0.300 inch pitch, 7.62 mm Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

AD746JN সারাংশ

The Analog Devices AD746JN is a dual precision BiFET operational amplifier with two AD744 amplifier circuits on one monolithic die, 500 ns settling to 0.01%, and an 8-pin PDIP package. Its headline characteristics include an 80 dB open-loop gain, 110 pA input bias current, 0.00035 uA input offset current, and a 75 V/us slew rate. The device operates from 9 V to 36 V total supply, equivalent to +4.5 V to +18 V for single-supply operation or ±4.5 V to ±18 V for dual-supply operation.

A BiFET operational amplifier is a voltage-amplifier built around junction field-effect transistor input devices. These low-noise inputs provide high input impedance, low bias current, and low offset current, placing the amplifier within the operational-amplifier hierarchy of signal-conditioning ICs used for precision analog measurement, buffering, filtering, and audio signal paths. The AD746 combines that low-input-current architecture with closely matched amplifier characteristics on the same die.

The AD746JN provides fast single-pole settling to within 0.01% in 500 ns, making it useful where acquisition systems require rapid recovery after a large input transition. Its stated total harmonic distortion of 0.0001% supports demanding audio applications, while the monolithic dual-amplifier construction gives closely matched AC and DC characteristics. The 110 pA bias current is particularly useful with high-impedance sensors, and the 80 dB open-loop gain supports precision closed-loop gain configurations.

The dual amplifier can implement two independent signal-conditioning channels or can be configured as a differential amplifier when its two amplifiers are interconnected appropriately. The device supports instrumentation and precision signal-chain requirements where low input current, high open-loop gain, fast settling, and low distortion are important. Its operating supply range also accommodates conventional ±15 V laboratory and industrial analog systems as well as lower-voltage designs operating from a single +9 V to +36 V rail.

Typical uses include input buffering for 12-bit and 14-bit ADCs or DACs, precision measurement front ends, audio signal conditioning, sample-and-hold signal paths, and active filters. A dual package reduces board area when two amplifier channels are required. It is particularly appropriate when the signal source has high source impedance, because the 110 pA bias current limits the voltage error introduced across that source resistance.

Designers should follow the manufacturer datasheet for pin connections, supply bypass capacitors, input and output voltage limits, and common-mode range. Decoupling should place a suitable ceramic capacitor close to the positive and negative supply pins, while input routing should minimize leakage and stray capacitance. Because a dual amplifier shares a package, thermal performance and channel-to-channel matching should be considered before assigning each channel to different thermal or source-impedance conditions.

This product page combines the AD746JN electrical characteristics, package details, practical application guidance, and verified drop-in replacement information in one engineering-focused reference. It also highlights where the JFET-input architecture, settling performance, low distortion, and dual-channel construction make AD746JN a strong choice for precision buffering and instrumentation.

এর জন্য ড্রপ-ইন বিকল্প AD746JN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

AD746SQ/883B

✅ ড্রপ-ইন
📦 8-pin PDIP
Ceramic-qualified package option with the same AD746-family dual BiFET architecture; temperature grade and qualification differ from the standard AD746JN

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

AD746JN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Dual precision BiFET operational amplifier
Number of Circuits 2 circuits
Internal Circuit Configuration Two AD744 BiFET amplifiers on one monolithic die
Supply Voltage Range 9 V to 36 V total
Dual-Supply Operating Range ±4.5 V to ±18 V
Single-Supply Operating Range +4.5 V to +18 V
Input Bias Current 110 pA
Input Offset Current 0.00035 uA
Open-Loop Gain 80 dB
Slew Rate 75 V/us
Settling Time 500 ns to 0.01%
Total Harmonic Distortion 0.0001%
Signal Converter Compatibility Buffer amplifier for 12-bit or 14-bit DACs and ADCs
প্যাকেজ 8-pin PDIP, 0.300 inch pitch, 7.62 mm
মাউন্টিং টাইপ Through-hole

AD746JN পিন কনফিগারেশন

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
পিন 1 OUTA — Amplifier A output
পিন 2 -INA — Amplifier A inverting input
পিন 3 +INA — Amplifier A non-inverting input
পিন 4 V- — Negative supply connection
পিন 5 +INB — Amplifier B non-inverting input
পিন 6 -INB — Amplifier B inverting input
পিন 7 OUTB — Amplifier B output
পিন 8 V+ — Positive supply connection

সাধারণ ব্যবহার

AD746JN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Impedance Instrumentation, ADC and DAC Signal Conditioning, Precision Active Filtering, Low-Distortion Audio Buffering, Sample-and-Hold Signal Paths, Legacy Test and Measurement Equipment.

🏭

High-Impedance Instrumentation

The AD746JN fits precision instrumentation front ends because its 110 pA input bias current limits the voltage error produced by a high source impedance. Two amplifiers can be used for input amplification and buffering without consuming two separate packages. The 80 dB open-loop gain supports accurate closed-loop amplification, while the 75 V/us slew rate preserves response to rapidly changing sensor waveforms. Designers should still verify common-mode range, input capacitance, and noise performance against the sensor and filter requirements.

📺

ADC and DAC Signal Conditioning

The AD746JN is suitable for buffering 12-bit and 14-bit ADCs or DACs because the manufacturer identifies it for converter-buffer use and specifies 500 ns settling to within 0.01%. Its dual architecture can condition two converter channels or provide gain and buffering functions in one package. The 0.0001% THD specification also helps preserve signal fidelity in higher-resolution analog paths. Verify converter output impedance, acquisition timing, capacitive loading, and settling margin in the complete interface.

🔧

Precision Active Filtering

The AD746JN suits precision active-filter implementations where both offset current and high open-loop gain influence the usable signal range. Its 80 dB open-loop gain reduces closed-loop gain error, while the dual BiFET inputs provide low bias current for filters connected to high-impedance sources. The 75 V/us slew rate helps preserve large-signal behavior, and 500 ns settling supports rapid transient recovery. Component tolerances, noise, stability, and the datasheet's recommended compensation network remain essential filter-design considerations.

🎧

Low-Distortion Audio Buffering

The AD746JN provides a low-distortion signal path for audio buffering because the manufacturer specifies 0.0001% THD and closely matched AC characteristics between the two monolithic channels. These characteristics are useful in balanced audio stages, crossover networks, and precision line-level buffers where channel mismatch would be undesirable. The dual package reduces board area for stereo implementations. Check the exact frequency response, output drive, supply configuration, and required output swing before finalizing an audio circuit.

📱

Sample-and-Hold Signal Paths

The AD746JN's 500 ns settling to within 0.01% makes it useful in sample-and-hold signal paths where the amplifier must recover rapidly after an acquisition interval. Its dual channels can support separate signal operations when channel matching and common supply noise are acceptable. The low 110 pA bias current is valuable with high-impedance switches and sensor nodes. Designers should account for switch charge injection, hold leakage, amplifier input capacitance, and the timing relationship between acquisition and conversion.

🖥️

Legacy Test and Measurement Equipment

The 8-pin PDIP package and broad 9 V to 36 V total supply range make the AD746JN practical for repair and modernization of legacy precision test equipment. Its two amplifiers can replace dual-stage analog sections while retaining through-hole PCB compatibility. The 110 pA input bias current is useful with high-impedance probes and sensors, and the 80 dB open-loop gain supports accurate closed-loop behavior. A redesign should verify the original common-mode range, output swing, pin orientation, and temperature requirements.

What is the AD746JN?
The AD746JN is a dual precision BiFET operational amplifier from Analog Devices, containing two AD744 amplifiers on one monolithic die in an 8-pin PDIP package. According to the manufacturer datasheet, it combines 110 pA input bias current, 80 dB open-loop gain, a 75 V/us slew rate, and 500 ns settling to within 0.01%. The closely matched AC and DC characteristics make the device particularly useful for instrumentation, precision buffering, and audio signal conditioning.
What are the key specifications of AD746JN that engineers should know?
The AD746JN is a dual 8-pin PDIP precision amplifier with an 80 dB open-loop gain, 110 pA input bias current, 0.00035 uA input offset current, and 75 V/us slew rate. According to the Analog Devices datasheet, the amplifier settles to within 0.01% in 500 ns and operates from 9 V to 36 V total supply. These figures support 12-bit or 14-bit converter buffering, high-impedance instrumentation, low-distortion audio paths, and precision active filtering.
What is the operating voltage range of AD746JN?
The AD746JN operates from 9 V to 36 V total supply voltage. The Analog Devices datasheet identifies a dual-supply range of ±4.5 V to ±18 V, which corresponds to +4.5 V to +18 V in a single-supply arrangement. The 8-pin PDIP configuration and broad supply range let the device be used in conventional precision analog systems based on ±15 V rails or lower-voltage designs using a single supply.
Where can I download the AD746JN datasheet PDF?
The official AD746JN datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ad746.pdf. The document covers the dual AD744-based architecture, electrical characteristics, supply arrangements, settling behavior, distortion, pin connections, and application information. Use the pin-description table in that manufacturer datasheet when assigning the eight package terminals on a PCB.
Where can I find the AD746JN pinout?
The AD746JN uses an 8-pin PDIP package with the standard dual operational-amplifier arrangement: pins 1 and 7 are the two outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is the negative supply, and pin 8 is the positive supply. According to the Analog Devices AD746 datasheet, verify all electrical limits and connection details against its pin-description table before layout release.
What is the best drop-in replacement for AD746JN?
AD746SQ/883B is the closest documented drop-in candidate because it is an AD746-family dual precision BiFET amplifier in an 8-pin PDIP-style package and retains the target's core amplifier architecture. Compatibility still requires checking the qualified temperature grade, ceramic-package dimensions, supply ratings, and exact pin mapping for the finished assembly. The cross-reference search did not establish enough evidence to certify additional manufacturer alternatives as pin-to-pin drop-ins.
What can replace AD746JN without changing the 8-pin footprint?
AD746SQ/883B is the documented candidate for an 8-pin-footprint replacement because it belongs to the AD746 dual BiFET amplifier family and uses the same numbered dual-amplifier arrangement. According to the manufacturer family information, the two channels share a monolithic die and therefore retain close AC and DC matching. Verify mechanical tolerances, operating-temperature requirements, and quality qualification before using it in a production redesign.
AD746JN vs AD746SQ/883B - which is better for a legacy instrument?
The AD746JN is generally the better choice for a conventional commercial or industrial instrument using a plastic 8-pin PDIP footprint, while AD746SQ/883B is better suited when a qualified ceramic-package option is specifically required. Both are AD746-family dual BiFET precision amplifiers, but temperature grade, package construction, and qualification requirements can determine suitability. Compare those requirements against the original instrument specification rather than selecting solely by nominal gain and bandwidth.
When should I choose AD746JN over another precision op amp?
Choose the AD746JN when the design requires two matched low-bias-current amplifiers, fast 500 ns settling to within 0.01%, and a 9 V to 36 V total supply range in an 8-pin PDIP footprint. Its 110 pA bias current is advantageous for high-impedance sources, while its 0.0001% THD supports sensitive audio circuits. Select another device when lower power, rail-to-rail inputs, or a surface-mount package is more important than these precision BiFET characteristics.
Is AD746JN suitable for ADC and DAC buffering?
The AD746JN is suitable for buffering 12-bit and 14-bit ADCs and DACs when the signal bandwidth remains within the amplifier's capabilities. According to the Analog Devices datasheet, its 500 ns settling to within 0.01% allows it to recover rapidly after large input excursions, and its low distortion supports high-fidelity signal paths. Input capacitance, source settling time, gain error, and output drive must still be checked for the particular converter.
Where can I buy AD746JN online?
Use the Request a Quote form on this page to request AD746JN availability, commercial terms, and lead time from XAIPART. The form provides a direct purchasing path without embedding a static price that may change with inventory or quantity. Specify the required quantity, 8-pin PDIP package, and any temperature-grade or legacy-instrument requirements when submitting the request.
What is the price of AD746JN?
AD746JN pricing depends on order quantity, stock position, and supply conditions, so use the Request a Quote form on this page for the current unit and volume terms. The form is the appropriate route for obtaining a current commercial quotation for the exact AD746JN MPN. For long-term or legacy production planning, ask the supplier to confirm sourcing continuity and the expected lead time in the same request.
Is AD746JN in stock and what is its lead time?
Current AD746JN stock and lead time should be confirmed through the Request a Quote form on this page. Submit the required quantity and note whether the part is needed for prototype, production, or long-term legacy support. Because this is an 8-pin PDIP precision amplifier, an authorized sourcing response can also confirm whether the requested grade remains available in the required package and temperature range.
What is the best Analog Devices equivalent for AD746JN?
AD746SQ/883B is the best-supported Analog Devices-family candidate because it retains the AD746 dual BiFET precision-amplifier architecture and an 8-pin PDIP-style implementation. The two parts are closely related, but package construction, qualification, and temperature grade can distinguish them in legacy equipment. Compare the manufacturer datasheet pin table and environmental requirements before approving it as a drop-in replacement.
Does the AD746JN meet RoHS and REACH requirements?
RoHS and REACH status must be confirmed for the exact AD746JN orderable configuration through the Request a Quote form and the applicable manufacturer environmental documentation. The AD746JN is an older dual precision BiFET amplifier, so a compliant status should not be inferred solely from its general-purpose catalog listing. If your finished equipment requires a signed material-declaration record, request that documentation before production approval.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AD746JN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the AD746JN when a legacy or precision analog design needs two closely matched JFET-input amplifiers in an 8-pin PDIP package. Its 110 pA input bias current is useful with high-impedance sensors, its 500 ns settling supports converter buffering, and its 0.0001% THD benefits low-distortion audio paths. Select AD746SQ/883B when a ceramic-package, qualified AD746-family option is more appropriate for the assembly or environmental requirements. Other Analog Devices amplifier families may be better when low-power operation, rail-to-rail inputs, or a surface-mount package is essential. Those alternatives can improve system flexibility, but they are not direct 8-pin PDIP drop-ins for the AD746JN and may require PCB changes. For any replacement, verify pin functions, supply range, common-mode range, output swing, stability, temperature grade, and package dimensions rather than relying on nominal amplifier type alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য AD746SQ/883B
Package 8-pin PDIP, 0.300 inch pitch, 7.62 mm 8-pin PDIP-style ceramic package
Brand Analog Devices Analog Devices
Amplifier Type Dual precision BiFET operational amplifier AD746-family dual precision BiFET operational amplifier
Number of Circuits 2 circuits 2 circuits

মূল পার্থক্যসমূহ

  • Dual matched amplifier channels in one package (বনামAD746SQ/883B)
  • Fast precision settling (বনামAD746SQ/883B)
  • Low input bias current for high-impedance sources (বনামAD746SQ/883B)
  • Low distortion for precision analog and audio paths (বনামAD746SQ/883B)

ডিজাইন নোট

Place the positive and negative supply bypass capacitors directly beside the AD746JN supply pins, with the shortest possible ground-return path. The 8-pin PDIP footprint makes through-hole lead spacing easy to accommodate, but lead inductance and long supply traces can still degrade performance. Follow the capacitor recommendations and pin arrangement in the manufacturer datasheet, and avoid routing high-impedance input traces beneath or parallel to switching-current paths.

Treat the two non-inverting inputs as high-impedance nodes. The specified 110 pA input bias current helps with high-source-impedance sensors, but leakage from PCB contamination, relay contacts, or adjacent power circuitry can still exceed the amplifier's bias current. Use guarding, clean board assembly practices, and sufficient spacing from noisy nets. For fast 500 ns settling, keep input and feedback traces short and terminated consistently with the source impedance.

Do not infer the full common-mode or output-voltage range from the 9 V to 36 V supply rating. Check input and output limits against the selected ±4.5 V to ±18 V operating mode, especially near the supply rails. Also confirm that a proposed AD746SQ/883B replacement has the same pin functions, acceptable package dimensions, required temperature range, and appropriate qualification for the finished equipment.

The AD746JN is intended for precision analog signal conditioning rather than driving low-impedance loads. Check output drive and capacitive-load stability using the manufacturer guidance before connecting the output to a long cable, ADC sampling network, or large shunt. Bypass energy is best used at the supply pins, where it reduces supply ripple and common-mode disturbance on both closely matched amplifier channels.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product and datasheet pages do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact orderable part in the retrieved text. Request the applicable environmental declaration before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

AD746JN datasheet AD746JN datasheet pdf AD746JN pinout AD746JN 8 pin PDIP AD746JN 500 ns settling AD746JN 110 pA input bias current AD746JN 80 dB open loop gain AD746JN drop in replacement AD746JN cross reference AD746JN vs AD746SQ/883B Analog Devices AD746JN AD746JN price AD746JN stock AD746JN lead time AD746JN ADC DAC buffer

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices AD746JN AD746SQ/883B AD744 BiFET operational amplifier JFET operational amplifier precision operational amplifier dual amplifier monolithic die instrumentation amplifier application ADC buffer DAC buffer precision active filter audio signal conditioning 110 pA input bias current 80 dB open-loop gain 75 V/us slew rate 500 ns settling time 0.0001% THD 8-pin PDIP DIP package family through-hole technology high-impedance signal conditioning sample-and-hold amplifier
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন