AD746JN - Dual 500ns Precision BiFET Op Amp | Analog Devices
部品番号: AD746JN ✓ 生産中AD746JN 概要
A BiFET operational amplifier is a voltage-amplifier built around junction field-effect transistor input devices. These low-noise inputs provide high input impedance, low bias current, and low offset current, placing the amplifier within the operational-amplifier hierarchy of signal-conditioning ICs used for precision analog measurement, buffering, filtering, and audio signal paths. The AD746 combines that low-input-current architecture with closely matched amplifier characteristics on the same die.
The AD746JN provides fast single-pole settling to within 0.01% in 500 ns, making it useful where acquisition systems require rapid recovery after a large input transition. Its stated total harmonic distortion of 0.0001% supports demanding audio applications, while the monolithic dual-amplifier construction gives closely matched AC and DC characteristics. The 110 pA bias current is particularly useful with high-impedance sensors, and the 80 dB open-loop gain supports precision closed-loop gain configurations.
The dual amplifier can implement two independent signal-conditioning channels or can be configured as a differential amplifier when its two amplifiers are interconnected appropriately. The device supports instrumentation and precision signal-chain requirements where low input current, high open-loop gain, fast settling, and low distortion are important. Its operating supply range also accommodates conventional ±15 V laboratory and industrial analog systems as well as lower-voltage designs operating from a single +9 V to +36 V rail.
Typical uses include input buffering for 12-bit and 14-bit ADCs or DACs, precision measurement front ends, audio signal conditioning, sample-and-hold signal paths, and active filters. A dual package reduces board area when two amplifier channels are required. It is particularly appropriate when the signal source has high source impedance, because the 110 pA bias current limits the voltage error introduced across that source resistance.
Designers should follow the manufacturer datasheet for pin connections, supply bypass capacitors, input and output voltage limits, and common-mode range. Decoupling should place a suitable ceramic capacitor close to the positive and negative supply pins, while input routing should minimize leakage and stray capacitance. Because a dual amplifier shares a package, thermal performance and channel-to-channel matching should be considered before assigning each channel to different thermal or source-impedance conditions.
This product page combines the AD746JN electrical characteristics, package details, practical application guidance, and verified drop-in replacement information in one engineering-focused reference. It also highlights where the JFET-input architecture, settling performance, low distortion, and dual-channel construction make AD746JN a strong choice for precision buffering and instrumentation.
ドロップイン代替品: AD746JN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD746SQ/883B
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD746JN 最大定格&電気的特性
| Amplifier Type | Dual precision BiFET operational amplifier |
| Number of Circuits | 2 circuits |
| Internal Circuit Configuration | Two AD744 BiFET amplifiers on one monolithic die |
| Supply Voltage Range | 9 V to 36 V total |
| Dual-Supply Operating Range | ±4.5 V to ±18 V |
| Single-Supply Operating Range | +4.5 V to +18 V |
| Input Bias Current | 110 pA |
| Input Offset Current | 0.00035 uA |
| Open-Loop Gain | 80 dB |
| Slew Rate | 75 V/us |
| Settling Time | 500 ns to 0.01% |
| Total Harmonic Distortion | 0.0001% |
| Signal Converter Compatibility | Buffer amplifier for 12-bit or 14-bit DACs and ADCs |
| パッケージ | 8-pin PDIP, 0.300 inch pitch, 7.62 mm |
| 実装タイプ | Through-hole |
AD746JN ピン構成
| ピン 1 | OUTA — Amplifier A output |
| ピン 2 | -INA — Amplifier A inverting input |
| ピン 3 | +INA — Amplifier A non-inverting input |
| ピン 4 | V- — Negative supply connection |
| ピン 5 | +INB — Amplifier B non-inverting input |
| ピン 6 | -INB — Amplifier B inverting input |
| ピン 7 | OUTB — Amplifier B output |
| ピン 8 | V+ — Positive supply connection |
主な用途
AD746JN の用途: 6 件s: High-Impedance Instrumentation, ADC and DAC Signal Conditioning, Precision Active Filtering, Low-Distortion Audio Buffering, Sample-and-Hold Signal Paths, Legacy Test and Measurement Equipment.
High-Impedance Instrumentation
The AD746JN fits precision instrumentation front ends because its 110 pA input bias current limits the voltage error produced by a high source impedance. Two amplifiers can be used for input amplification and buffering without consuming two separate packages. The 80 dB open-loop gain supports accurate closed-loop amplification, while the 75 V/us slew rate preserves response to rapidly changing sensor waveforms. Designers should still verify common-mode range, input capacitance, and noise performance against the sensor and filter requirements.
おすすめ
ADC and DAC Signal Conditioning
The AD746JN is suitable for buffering 12-bit and 14-bit ADCs or DACs because the manufacturer identifies it for converter-buffer use and specifies 500 ns settling to within 0.01%. Its dual architecture can condition two converter channels or provide gain and buffering functions in one package. The 0.0001% THD specification also helps preserve signal fidelity in higher-resolution analog paths. Verify converter output impedance, acquisition timing, capacitive loading, and settling margin in the complete interface.
おすすめ
Precision Active Filtering
The AD746JN suits precision active-filter implementations where both offset current and high open-loop gain influence the usable signal range. Its 80 dB open-loop gain reduces closed-loop gain error, while the dual BiFET inputs provide low bias current for filters connected to high-impedance sources. The 75 V/us slew rate helps preserve large-signal behavior, and 500 ns settling supports rapid transient recovery. Component tolerances, noise, stability, and the datasheet's recommended compensation network remain essential filter-design considerations.
おすすめ
Low-Distortion Audio Buffering
The AD746JN provides a low-distortion signal path for audio buffering because the manufacturer specifies 0.0001% THD and closely matched AC characteristics between the two monolithic channels. These characteristics are useful in balanced audio stages, crossover networks, and precision line-level buffers where channel mismatch would be undesirable. The dual package reduces board area for stereo implementations. Check the exact frequency response, output drive, supply configuration, and required output swing before finalizing an audio circuit.
おすすめ
Sample-and-Hold Signal Paths
The AD746JN's 500 ns settling to within 0.01% makes it useful in sample-and-hold signal paths where the amplifier must recover rapidly after an acquisition interval. Its dual channels can support separate signal operations when channel matching and common supply noise are acceptable. The low 110 pA bias current is valuable with high-impedance switches and sensor nodes. Designers should account for switch charge injection, hold leakage, amplifier input capacitance, and the timing relationship between acquisition and conversion.
おすすめ
Legacy Test and Measurement Equipment
The 8-pin PDIP package and broad 9 V to 36 V total supply range make the AD746JN practical for repair and modernization of legacy precision test equipment. Its two amplifiers can replace dual-stage analog sections while retaining through-hole PCB compatibility. The 110 pA input bias current is useful with high-impedance probes and sensors, and the 80 dB open-loop gain supports accurate closed-loop behavior. A redesign should verify the original common-mode range, output swing, pin orientation, and temperature requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD746JN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD746SQ/883B |
|---|---|---|
| Package | 8-pin PDIP, 0.300 inch pitch, 7.62 mm | 8-pin PDIP-style ceramic package |
| Brand | Analog Devices | Analog Devices |
| Amplifier Type | Dual precision BiFET operational amplifier | AD746-family dual precision BiFET operational amplifier |
| Number of Circuits | 2 circuits | 2 circuits |
主な差別化要因
- Dual matched amplifier channels in one package (vs AD746SQ/883B)
- Fast precision settling (vs AD746SQ/883B)
- Low input bias current for high-impedance sources (vs AD746SQ/883B)
- Low distortion for precision analog and audio paths (vs AD746SQ/883B)
設計ノート
Place the positive and negative supply bypass capacitors directly beside the AD746JN supply pins, with the shortest possible ground-return path. The 8-pin PDIP footprint makes through-hole lead spacing easy to accommodate, but lead inductance and long supply traces can still degrade performance. Follow the capacitor recommendations and pin arrangement in the manufacturer datasheet, and avoid routing high-impedance input traces beneath or parallel to switching-current paths.
Treat the two non-inverting inputs as high-impedance nodes. The specified 110 pA input bias current helps with high-source-impedance sensors, but leakage from PCB contamination, relay contacts, or adjacent power circuitry can still exceed the amplifier's bias current. Use guarding, clean board assembly practices, and sufficient spacing from noisy nets. For fast 500 ns settling, keep input and feedback traces short and terminated consistently with the source impedance.
Do not infer the full common-mode or output-voltage range from the 9 V to 36 V supply rating. Check input and output limits against the selected ±4.5 V to ±18 V operating mode, especially near the supply rails. Also confirm that a proposed AD746SQ/883B replacement has the same pin functions, acceptable package dimensions, required temperature range, and appropriate qualification for the finished equipment.
The AD746JN is intended for precision analog signal conditioning rather than driving low-impedance loads. Check output drive and capacitive-load stability using the manufacturer guidance before connecting the output to a long cable, ADC sampling network, or large shunt. Bypass energy is best used at the supply pins, where it reduces supply ripple and common-mode disturbance on both closely matched amplifier channels.
コンプライアンス情報
The manufacturer product and datasheet pages do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact orderable part in the retrieved text. Request the applicable environmental declaration before production release.