Analog Devices

ADF4118BRUZ - 3 GHz Integer-N PLL | Analog Devices

MPN: ADF4118BRUZ ✓ সক্রিয়
+2.7 V to +5.5 V Vdss 6.5 mA Id 16-lead TSSOP, 4.40 mm width Package 3.0 GHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADF4118BRUZ সারাংশ

The Analog Devices ADF4118BRUZ is a single-channel, integer-N radio-frequency phase-locked-loop frequency synthesizer with a maximum RF input frequency of 3 GHz, a 2.7 V to 5.5 V supply range, and a 16-lead TSSOP package. The device operates from a 4.40 mm-wide package and provides a 3-wire serial interface for programming its frequency-generation functions.

A phase-locked loop, or PLL, is a feedback-controlled timing system that locks an output frequency to a stable reference. A frequency synthesizer is a PLL-based timing component used to produce programmable RF local-oscillator signals. The ADF4118 family combines a digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for wireless receiver and transmitter signal chains.

The ADF4118BRUZ reaches an RF input frequency of up to 3 GHz and operates from a 2.7 V to 5.5 V power supply. Its integer-N architecture uses programmable counters to establish the required division ratio. A three-wire serial interface supports digital control, while digital lock detect provides a status indication for system sequencing. Separate VP support allows extended tuning-voltage operation in 3 V systems.

The internal architecture is designed for low-noise frequency generation in RF upconversion and downconversion paths. Its programmable reference divider and A/B counters provide flexible ratio programming, while the dual-modulus prescaler supports the required RF input division range. The 3 GHz capability makes the ADF4118BRUZ appropriate for RF communications equipment operating below that upper limit.

Typical uses include wireless receiver local oscillators, wireless transmitter upconversion loops, radio-frequency instrumentation, and low-power RF communication modules. The 2.7 V minimum supply supports compact 3 V systems when the circuit topology and tuning voltage remain within the device's operating limits. The 16-lead TSSOP package also allows reuse of compact surface-mount boards rather than requiring a large through-hole footprint.

When designing around the ADF4118BRUZ, calculate the required prescaler, B-counter, and A-counter values from the reference frequency and target RF input before programming the device. Keep the RF input and charge-pump loop-filter layout compact to reduce phase noise and unwanted coupling. Confirm the maximum input frequency, lock behavior, and component tolerances against the manufacturer datasheet before releasing the PCB.

This page combines the manufacturer's core specifications with application guidance, practical design notes, and a compatibility-focused replacement assessment. It highlights where the ADF4118BRUZ fits RF frequency-synthesis designs and helps engineers distinguish exact package options from functionally similar PLL devices that cannot replace it on an existing PCB.

এর জন্য ড্রপ-ইন বিকল্প ADF4118BRUZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADF4118BRUZ (একই form factor এবং footprint) — পার্থক্য রয়েছে A Counter, Charge Pump, Package, Device Type, Phase Detector.

Analog Devices
A Counter: 5-bit
Charge Pump: Precision charge pump with selectable currents
Package: 16-TSSOP, 0.173 inch width, 4.40 mm width
এর সাথে তুলনা করুন ADF4118BRUZ →
Analog Devices
A Counter: Programmable
Package: 16-TSSOP, 0.173 inch width, 4.40 mm width
Phase Detector: Low-noise digital PFD
এর সাথে তুলনা করুন ADF4118BRUZ →

ADF4118BRU

✅ ড্রপ-ইন
Analog Devices
📦 16-lead TSSOP
RF PLL frequency synthesizer · Single, Integer-N · 1 circuit · 3.0 GHz · Dual-modulus P/P+1 · Low-noise digital PFD

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADF4118BRUZ বিশেষণ

Device Type Integer-N RF PLL frequency synthesizer
Maximum RF Input Frequency 3.0 GHz
Supply Voltage Range +2.7 V to +5.5 V
সাপ্লাই কারেন্ট 6.5 mA
Number of Channels 1
Reference Divider Programmable
A Counter 5-bit programmable
B Counter Programmable
Prescaler Dual-modulus P/P+1
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Serial Interface 3-wire serial interface
Lock Detection Digital lock detect
Power-Down Function Supported
Separate VP Supply Supported
প্যাকেজ 16-lead TSSOP, 4.40 mm width
মাউন্টিং টাইপ Surface Mount

ADF4118BRUZ 16-lead tssop, 4.40 mm width পিন কনফিগারেশন গাইড

ADF4118BRUZ (16-lead tssop, 4.40 mm width প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADF4118BRUZ-এর জন্য 16-lead tssop, 4.40 mm width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADF4118BRUZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADF4118BRUZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, RF Communication Module, RF Test and Measurement Instrument, Radio-Frequency Data Converter, Industrial RF Control System.

🌐

Wireless Receiver Local Oscillator

The ADF4118BRUZ fits a wireless receiver local-oscillator loop that must accept an RF signal as high as 3.0 GHz. Its single-channel integer-N architecture combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and programmable A and B counters for programmable RF division. The 2.7 V to 5.5 V supply range supports both 3 V and 5 V system partitioning. Place the device near the RF input and loop filter to minimize trace sensitivity, and use digital lock detect to confirm that the receiver mixer can safely enable.

📡

Wireless Transmitter Upconversion

The ADF4118BRUZ can generate the programmable local-oscillator reference used in RF transmitter upconversion. Its maximum RF input frequency of 3.0 GHz supports high-frequency RF synthesis while the dual-modulus P/P+1 prescaler and programmable counters establish the required division ratio. A 6.5 mA supply-current specification and a 2.7 V minimum supply are useful for compact power-sensitive transmitters. The 3-wire interface allows the radio controller to set the frequency, while lock detect provides a sequencing signal before the transmit path is enabled.

📱

RF Communication Module

The ADF4118BRUZ is appropriate for compact RF communication modules requiring an integer-N local oscillator without a larger mixed-signal synthesizer package. Its 16-lead TSSOP body is 4.40 mm wide and uses surface mounting, which supports dense module layouts. The 2.7 V to 5.5 V operating range accommodates 3 V battery-powered circuitry and higher-voltage front ends. Keep the reference oscillator and charge-pump loop filter close to the device, and use the power-down function to reduce consumption when the radio is idle.

📺

RF Test and Measurement Instrument

The ADF4118BRUZ can serve as the programmable RF reference generator inside a compact test or measurement instrument. Its programmable reference divider, 5-bit A counter, programmable B counter, and dual-modulus prescaler allow the required channel ratios to be established for frequencies below the 3.0 GHz maximum. The serial interface simplifies automated control, and digital lock detect can be used as an interlock. Accurate layout, stable reference sourcing, and a well-designed charge-pump loop filter are essential for repeatable phase and frequency performance.

📡

Radio-Frequency Data Converter

The ADF4118BRUZ can provide a programmable local oscillator for RF sampling, modulation, or demodulation circuits requiring an integer-N solution. Its 3.0 GHz RF input capability covers high-frequency mixer inputs, while the 6.5 mA supply-current specification supports low-power instrumentation. The device is especially useful where a fixed reference must be converted into multiple programmable RF frequencies. Designers should preserve short RF paths, use a low-inductance loop-filter layout, and verify that the programmed divider values remain valid across the intended channel range.

🏭

Industrial RF Control System

The ADF4118BRUZ can support industrial RF-control and telemetry systems that use a stable reference to derive a programmable RF operating signal. The single-channel integer-N PLL provides a compact implementation, while the 3-wire interface allows a controller to change operating parameters. Its 2.7 V to 5.5 V supply range is practical for mixed industrial voltage rails, and the TSSOP package simplifies assembly. In a factory environment, apply the device within its specified electrical limits and isolate sensitive RF and charge-pump nodes from noisy power and switching circuitry.

What is the ADF4118BRUZ used for?
The ADF4118BRUZ is a single-channel integer-N RF PLL frequency synthesizer used to generate programmable local-oscillator signals in wireless receivers and transmitters. According to the Analog Devices ADF4116/ADF4117/ADF4118 datasheet, Rev. D, it combines a digital phase-frequency detector, precision charge pump, programmable reference divider, A and B counters, and a dual-modulus prescaler. Its maximum RF input frequency is 3.0 GHz.
What are the key specifications of ADF4118BRUZ that engineers should know?
The ADF4118BRUZ supports RF input frequencies up to 3.0 GHz from a 2.7 V to 5.5 V supply and draws 6.5 mA. It is a single integer-N channel with a programmable reference divider, 5-bit A counter, programmable B counter, dual-modulus P/P+1 prescaler, and 3-wire serial interface. The device is packaged in a 16-lead TSSOP measuring 4.40 mm wide, according to the Analog Devices manufacturer datasheet.
What is the operating voltage of ADF4118BRUZ?
The ADF4118BRUZ operates from 2.7 V to 5.5 V. The Analog Devices ADF4116/ADF4117/ADF4118 datasheet, Rev. D, identifies this range as the ADF4117 and ADF4118 supply specification and also notes separate VP support for extended tuning voltage in 3 V systems. Designers should confirm signal amplitudes and charge-pump requirements against the complete datasheet tables before finalizing a 2.7 V implementation.
Where can I download the ADF4118BRUZ datasheet PDF?
The official ADF4118BRUZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4116_4117_4118.pdf. The document is titled RF PLL Frequency Synthesizers Data Sheet, Rev. D, and covers the ADF4116, ADF4117, and ADF4118 family. Use its pin-description table, electrical characteristics, and application information when assigning board connections and setting programming values.
Where can I find the ADF4118BRUZ pinout?
The ADF4118BRUZ pinout is defined in the pin-description and package drawings in the official Analog Devices RF PLL Frequency Synthesizers Data Sheet, Rev. D. The device uses a 16-lead TSSOP package with a 4.40 mm body width. Use the manufacturer drawing when assigning the 3-wire serial interface, power pins, charge-pump connection, reference input, RF input, lock-detect output, and VP connection.
Where can I buy ADF4118BRUZ online?
Use the Request a Quote form on this page to request ADF4118BRUZ pricing, stock confirmation, and current lead time from XAIPART. The component is identified as a production single integer-N 3.0 GHz PLL in a 16-lead TSSOP package. Providing the intended quantity and delivery schedule with the request helps establish a current commercial quotation.
What is the price of ADF4118BRUZ?
Use the Request a Quote form on this page for the current ADF4118BRUZ quotation. Commercial pricing can vary with order quantity, delivery schedule, and supply conditions, so a static figure would not represent a current offer. Submit the required quantity, target date, and packaging preference through the form for an actionable response.
What is the lead time for ADF4118BRUZ?
The current ADF4118BRUZ lead time should be requested through the Request a Quote form on this page. Lead time depends on the quantity ordered, production availability, and the delivery schedule requested. The manufacturer lists the ADF4118 family as production, but a current order-specific schedule is required for procurement planning.
Is ADF4118BRUZ in stock?
Request current ADF4118BRUZ inventory through the Request a Quote form on this page. Stock status changes with order size and supply conditions, so the purchasing team should submit the required quantity and target delivery date for confirmation. The device is available as a production Analog Devices PLL in a 16-lead TSSOP package.
ADF4118BRUZ vs ADF4118BRU: which is the correct orderable part?
ADF4118BRUZ and ADF4118BRU identify orderable configurations of the Analog Devices ADF4118 frequency synthesizer, and both are associated with the same 16-lead TSSOP device family. Their exact packing code and temperature-grade treatment must be confirmed in the manufacturer ordering information before substitution. Use the Request a Quote form and provide the required suffix so procurement can match the correct device configuration.
Is ADF4118BRUZ the same as ADF4107BRU-REEL?
No definitive drop-in equivalence should be assumed between the ADF4118BRUZ and ADF4107BRU-REEL. The cross-reference information identifies both as 16-lead TSSOP devices but explicitly states that pin functions and internal architecture must be checked against their respective datasheets. The ADF4107 family targets a different frequency range, so board-level verification is required before any replacement.
What is the best drop-in replacement for ADF4118BRUZ?
ADF4118BRU is the closest documented same-family ordering option for the ADF4118BRUZ, subject to confirmation of packing and temperature-grade requirements. No cross-manufacturer part has been confirmed as pin-to-pin and parametrically equivalent. Verify the 16-lead pin assignment, 3.0 GHz upper RF frequency, 2.7 V to 5.5 V supply range, and production-status requirements before approving a substitution.
Can ADF4118BRUZ replace ADF4118BRUZ-RL7?
The ADF4118BRUZ and ADF4118BRUZ-RL7 are closely related ADF4118 order codes, but the final suffix can encode packing or grade information that must not be ignored. Check the manufacturer ordering guide and the receiving device's specified temperature grade before substitution. For production purchasing, state the exact required MPN in the Request a Quote form to avoid an incorrect suffix or reel configuration.
When should I choose ADF4118BRUZ over another PLL?
Choose the ADF4118BRUZ when the design needs a single-channel integer-N RF PLL that accepts signals up to 3.0 GHz, operates from 2.7 V to 5.5 V, and fits a 16-lead TSSOP footprint. Its programmable counters, dual-modulus prescaler, 3-wire interface, lock detect, and power-down function suit receiver and transmitter local-oscillator loops. Select another PLL when its RF range, architecture, or pinout better matches the system.
Is ADF4118BRUZ suitable for a 3 V wireless receiver?
The ADF4118BRUZ is suitable for many 3 V RF designs because its stated supply range begins at 2.7 V and includes separate VP support for extended tuning voltage in 3 V systems. The Analog Devices manufacturer datasheet also lists digital lock detect and power-down support for system control. Final suitability depends on the RF input level, charge-pump voltage, reference amplitude, and channel spacing used by the receiver.
What can replace ADF4118BRUZ?
ADF4118BRU is the closest same-family alternative identified for the ADF4118BRUZ, while ADF4118BRUZ-RL7 and ADF4118BRUZ-RL are related order codes whose suffix meaning must be checked in the manufacturer ordering guide. A true drop-in replacement must preserve the 16-lead pin functions, 3.0 GHz RF capability, 2.7 V to 5.5 V operation, and required temperature grade. No verified cross-brand equivalent is established here.
What is the best Analog Devices equivalent for ADF4118BRUZ?
The closest Analog Devices orderable candidate identified is ADF4118BRU, with ADF4118BRUZ-RL7 and ADF4118BRUZ-RL offering related suffix options. Compatibility depends on whether the change affects only reel packaging, temperature grade, or another ordering attribute. Consult the ADF411x family datasheet and ordering information before treating any of them as an interchangeable production replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADF4118BRUZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADF4118BRUZ when the receiver, transmitter, or test system requires a single-channel integer-N PLL accepting RF input frequencies up to 3.0 GHz from a 2.7 V to 5.5 V supply. Its programmable reference divider, A and B counters, dual-modulus prescaler, 3-wire interface, digital lock detect, and power-down mode support compact RF signal-chain designs. ADF4118BRU is the closest documented same-family order code, but confirm suffix, temperature grade, and packing requirements before substituting it. Do not select the ADF4107 family solely because it also uses a 16-lead TSSOP package; its architecture and frequency range must be validated against the target board. A cross-manufacturer replacement is appropriate only after a manufacturer-confirmed pin mapping and parametric comparison establish true drop-in operation.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADF4118BRU
Manufacturer Analog Devices Analog Devices
Package 16-lead TSSOP, 4.40 mm width 16-lead TSSOP
Device Type Integer-N RF PLL frequency synthesizer Integer-N frequency synthesizer
Maximum RF Input Frequency 3.0 GHz 3.0 GHz
Supply Voltage Range +2.7 V to +5.5 V +2.7 V to +5.5 V
Supply Current 6.5 mA 6.5 mA
Serial Interface 3-wire serial interface 3-wire serial interface
Number of Channels 1 1
Architecture Digital PFD, precision charge pump, programmable reference divider, A/B counters, dual-modulus prescaler Digital PFD, precision charge pump, programmable reference divider, A/B counters, dual-modulus prescaler
Power-Down and Lock Detect Power-down mode and digital lock detect Power-down mode and digital lock detect

মূল পার্থক্যসমূহ

  • Supports RF input frequencies up to 3.0 GHz (বনামADF4107BRU-REEL)
  • Uses the established ADF4118 integer-N architecture (বনামADF4154BRU)
  • Supports a 3 V-oriented supply arrangement (বনামADF4116BRUZ)

ডিজাইন নোট

Place the charge-pump components and loop filter directly beside their associated ADF4118BRUZ pins, and minimize the loop-filter trace area. Keep the RF input path short and away from digital serial-interface traces. A compact, symmetrical layout helps preserve intended loop dynamics and reduces coupling from switching or high-current circuitry.

Decouple the supply pins with capacitors selected according to the Analog Devices manufacturer datasheet and the impedance characteristics of the selected reference source. Separate VP handling is important in 3 V systems because it supports extended tuning-voltage operation. Verify the supply, VP, charge-pump, and signal amplitudes under worst-case operating conditions before fabrication.

Do not treat equal package dimensions as proof of drop-in compatibility. Although the ADF4118BRUZ and ADF4107BRU-REEL use 16-lead TSSOP packages, their pin functions and internal architectures differ. Use the ADF411x manufacturer pin-description table and verify reference, RF, serial-interface, charge-pump, and lock-detect assignments before making any substitution.

Program the prescaler, B counter, and A counter from the target reference and RF frequencies before hardware release. Confirm that every channel setting produces a valid divider ratio and that the loop bandwidth supports the intended modulation or hopping rate. Re-evaluate lock time and reference phase-noise requirements whenever the channel spacing or reference frequency changes.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance attributes are not stated in the manufacturer's product-page excerpt or the ADF411x datasheet excerpt.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADF4118BRUZ datasheet ADF4118BRUZ datasheet pdf ADF4118BRUZ pinout ADF4118BRUZ specifications ADF4118BRUZ 3 GHz PLL ADF4118BRUZ TSSOP pinout ADF4118BRUZ equivalent ADF4118BRUZ replacement ADF4118BRUZ vs ADF4118BRU ADF4118BRUZ vs ADF4107BRU-REEL Analog Devices ADF4118BRUZ ADF4118BRUZ price ADF4118BRUZ stock ADF4118BRUZ local oscillator ADF4118BRUZ RF synthesizer

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADF4118BRUZ ADF4118 ADF4118BRU ADF4117BRUZ ADF4116BRUZ phase-locked loop PLL integer-N frequency synthesizer RF local oscillator digital phase-frequency detector PFD precision charge pump programmable reference divider dual-modulus prescaler 3-wire serial interface digital lock detect power-down mode separate VP supply 16-lead TSSOP TSSOP family surface-mount package wireless receiver wireless transmitter RF upconversion RF downconversion
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন