ADF4118BRUZ - 3 GHz Integer-N PLL | Analog Devices
MPN: ADF4118BRUZ ✓ Hoạt độngADF4118BRUZ Tóm tắt
A phase-locked loop, or PLL, is a feedback-controlled timing system that locks an output frequency to a stable reference. A frequency synthesizer is a PLL-based timing component used to produce programmable RF local-oscillator signals. The ADF4118 family combines a digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for wireless receiver and transmitter signal chains.
The ADF4118BRUZ reaches an RF input frequency of up to 3 GHz and operates from a 2.7 V to 5.5 V power supply. Its integer-N architecture uses programmable counters to establish the required division ratio. A three-wire serial interface supports digital control, while digital lock detect provides a status indication for system sequencing. Separate VP support allows extended tuning-voltage operation in 3 V systems.
The internal architecture is designed for low-noise frequency generation in RF upconversion and downconversion paths. Its programmable reference divider and A/B counters provide flexible ratio programming, while the dual-modulus prescaler supports the required RF input division range. The 3 GHz capability makes the ADF4118BRUZ appropriate for RF communications equipment operating below that upper limit.
Typical uses include wireless receiver local oscillators, wireless transmitter upconversion loops, radio-frequency instrumentation, and low-power RF communication modules. The 2.7 V minimum supply supports compact 3 V systems when the circuit topology and tuning voltage remain within the device's operating limits. The 16-lead TSSOP package also allows reuse of compact surface-mount boards rather than requiring a large through-hole footprint.
When designing around the ADF4118BRUZ, calculate the required prescaler, B-counter, and A-counter values from the reference frequency and target RF input before programming the device. Keep the RF input and charge-pump loop-filter layout compact to reduce phase noise and unwanted coupling. Confirm the maximum input frequency, lock behavior, and component tolerances against the manufacturer datasheet before releasing the PCB.
This page combines the manufacturer's core specifications with application guidance, practical design notes, and a compatibility-focused replacement assessment. It highlights where the ADF4118BRUZ fits RF frequency-synthesis designs and helps engineers distinguish exact package options from functionally similar PLL devices that cannot replace it on an existing PCB.
Bộ thay thế dễ dàng lắp đặt cho ADF4118BRUZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADF4118BRUZ (cùng hình factor và footprint) — khác nhau ở A Counter, Charge Pump, Package, Device Type, Phase Detector.
ADF4118BRU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADF4118BRUZ Thông số kỹ thuật
| Device Type | Integer-N RF PLL frequency synthesizer |
| Maximum RF Input Frequency | 3.0 GHz |
| Supply Voltage Range | +2.7 V to +5.5 V |
| Điện áp cung cấp | 6.5 mA |
| Number of Channels | 1 |
| Reference Divider | Programmable |
| A Counter | 5-bit programmable |
| B Counter | Programmable |
| Prescaler | Dual-modulus P/P+1 |
| Phase Detector | Low-noise digital phase-frequency detector |
| Charge Pump | Precision charge pump |
| Serial Interface | 3-wire serial interface |
| Lock Detection | Digital lock detect |
| Power-Down Function | Supported |
| Separate VP Supply | Supported |
| Hộp | 16-lead TSSOP, 4.40 mm width |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân ADF4118BRUZ 16-lead tssop, 4.40 mm width
Cấu hình chân cho ADF4118BRUZ (16-lead tssop, 4.40 mm width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADF4118BRUZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADF4118BRUZ phù hợp cho 6 Áp dụngs: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, RF Communication Module, RF Test and Measurement Instrument, Radio-Frequency Data Converter, Industrial RF Control System.
Wireless Receiver Local Oscillator
The ADF4118BRUZ fits a wireless receiver local-oscillator loop that must accept an RF signal as high as 3.0 GHz. Its single-channel integer-N architecture combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and programmable A and B counters for programmable RF division. The 2.7 V to 5.5 V supply range supports both 3 V and 5 V system partitioning. Place the device near the RF input and loop filter to minimize trace sensitivity, and use digital lock detect to confirm that the receiver mixer can safely enable.
Được đề xuất
Wireless Transmitter Upconversion
The ADF4118BRUZ can generate the programmable local-oscillator reference used in RF transmitter upconversion. Its maximum RF input frequency of 3.0 GHz supports high-frequency RF synthesis while the dual-modulus P/P+1 prescaler and programmable counters establish the required division ratio. A 6.5 mA supply-current specification and a 2.7 V minimum supply are useful for compact power-sensitive transmitters. The 3-wire interface allows the radio controller to set the frequency, while lock detect provides a sequencing signal before the transmit path is enabled.
Được đề xuất
RF Communication Module
The ADF4118BRUZ is appropriate for compact RF communication modules requiring an integer-N local oscillator without a larger mixed-signal synthesizer package. Its 16-lead TSSOP body is 4.40 mm wide and uses surface mounting, which supports dense module layouts. The 2.7 V to 5.5 V operating range accommodates 3 V battery-powered circuitry and higher-voltage front ends. Keep the reference oscillator and charge-pump loop filter close to the device, and use the power-down function to reduce consumption when the radio is idle.
Được đề xuất
RF Test and Measurement Instrument
The ADF4118BRUZ can serve as the programmable RF reference generator inside a compact test or measurement instrument. Its programmable reference divider, 5-bit A counter, programmable B counter, and dual-modulus prescaler allow the required channel ratios to be established for frequencies below the 3.0 GHz maximum. The serial interface simplifies automated control, and digital lock detect can be used as an interlock. Accurate layout, stable reference sourcing, and a well-designed charge-pump loop filter are essential for repeatable phase and frequency performance.
Được đề xuất
Radio-Frequency Data Converter
The ADF4118BRUZ can provide a programmable local oscillator for RF sampling, modulation, or demodulation circuits requiring an integer-N solution. Its 3.0 GHz RF input capability covers high-frequency mixer inputs, while the 6.5 mA supply-current specification supports low-power instrumentation. The device is especially useful where a fixed reference must be converted into multiple programmable RF frequencies. Designers should preserve short RF paths, use a low-inductance loop-filter layout, and verify that the programmed divider values remain valid across the intended channel range.
Được đề xuất
Industrial RF Control System
The ADF4118BRUZ can support industrial RF-control and telemetry systems that use a stable reference to derive a programmable RF operating signal. The single-channel integer-N PLL provides a compact implementation, while the 3-wire interface allows a controller to change operating parameters. Its 2.7 V to 5.5 V supply range is practical for mixed industrial voltage rails, and the TSSOP package simplifies assembly. In a factory environment, apply the device within its specified electrical limits and isolate sensitive RF and charge-pump nodes from noisy power and switching circuitry.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADF4118BRUZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADF4118BRU |
|---|---|---|
| Manufacturer | Analog Devices | Analog Devices |
| Package | 16-lead TSSOP, 4.40 mm width | 16-lead TSSOP |
| Device Type | Integer-N RF PLL frequency synthesizer | Integer-N frequency synthesizer |
| Maximum RF Input Frequency | 3.0 GHz | 3.0 GHz |
| Supply Voltage Range | +2.7 V to +5.5 V | +2.7 V to +5.5 V |
| Supply Current | 6.5 mA | 6.5 mA |
| Serial Interface | 3-wire serial interface | 3-wire serial interface |
| Number of Channels | 1 | 1 |
| Architecture | Digital PFD, precision charge pump, programmable reference divider, A/B counters, dual-modulus prescaler | Digital PFD, precision charge pump, programmable reference divider, A/B counters, dual-modulus prescaler |
| Power-Down and Lock Detect | Power-down mode and digital lock detect | Power-down mode and digital lock detect |
Bảo phân biệt quan trọng
- Supports RF input frequencies up to 3.0 GHz (vsADF4107BRU-REEL)
- Uses the established ADF4118 integer-N architecture (vsADF4154BRU)
- Supports a 3 V-oriented supply arrangement (vsADF4116BRUZ)
Ghi chú thiết kế
Place the charge-pump components and loop filter directly beside their associated ADF4118BRUZ pins, and minimize the loop-filter trace area. Keep the RF input path short and away from digital serial-interface traces. A compact, symmetrical layout helps preserve intended loop dynamics and reduces coupling from switching or high-current circuitry.
Decouple the supply pins with capacitors selected according to the Analog Devices manufacturer datasheet and the impedance characteristics of the selected reference source. Separate VP handling is important in 3 V systems because it supports extended tuning-voltage operation. Verify the supply, VP, charge-pump, and signal amplitudes under worst-case operating conditions before fabrication.
Do not treat equal package dimensions as proof of drop-in compatibility. Although the ADF4118BRUZ and ADF4107BRU-REEL use 16-lead TSSOP packages, their pin functions and internal architectures differ. Use the ADF411x manufacturer pin-description table and verify reference, RF, serial-interface, charge-pump, and lock-detect assignments before making any substitution.
Program the prescaler, B counter, and A counter from the target reference and RF frequencies before hardware release. Confirm that every channel setting produces a valid divider ratio and that the loop bandwidth supports the intended modulation or hopping rate. Re-evaluate lock time and reference phase-noise requirements whenever the channel spacing or reference frequency changes.
Thông tin tuân thủ
Compliance attributes are not stated in the manufacturer's product-page excerpt or the ADF411x datasheet excerpt.