Analog Devices

ADM207ARSZ - 5V 5/3 RS-232 Transceiver | Analog Devices

MPN: ADM207ARSZ ✓ সক্রিয়
5 V Vdss 24-lead SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADM207ARSZ সারাংশ

The Analog Devices ADM207ARSZ is a 5 V powered CMOS RS-232 transceiver with five drivers and three receivers, operating at up to 200 kbps in a 24-lead SSOP package. It supports EIA-232-E and V.28 interfaces where ±12 V supplies are unavailable. The device accepts charge-pump capacitor values from 0.1 µF to 10 µF and produces approximately ±9 V output swing from a single 5 V supply.

An RS-232 transceiver is an interface circuit that combines digital line drivers and receivers for serial communication using EIA-232 signaling. It belongs to the interface-IC hierarchy, where transceiver functions bridge a CMOS or TTL logic system and a differential, bipolar-voltage communications network. ADM2xx devices are designed for RS-232 links in industrial equipment, computers, instrumentation, and embedded control systems.

The five-driver and three-receiver configuration supports multiple serial ports or asymmetric data paths in one package. Its 200 kbps capability is suitable for short-distance serial links, while the integrated charge-pump circuitry eliminates the need for a separate ±12 V power source. According to the Analog Devices ADM207 product page, the ADM207 supports 5 V operation and 0.1 µF external charge-pump capacitors.

The ADM207 family uses CMOS drivers and receivers to provide low-power RS-232 operation. The manufacturer lists low power at 15 mW, approximately ±9 V output swing, and compatibility with the MAX206 through MAX211 and MAX213 families. Unlike designs requiring a negative supply, this transceiver derives positive and negative RS-232 levels internally, simplifying system power architecture while adding external charge-pump capacitors.

Typical uses include industrial serial controllers, test equipment, data acquisition systems, POS terminals, and embedded instruments. The three receivers can monitor handshake, status, or acknowledgment lines, while the five drivers support multiple outgoing RS-232 channels. Systems with a strict 24-SSOP footprint and up to 200 kbps operation can use the ADM207ARSZ without changing their existing interface layout.

Designers should follow the Analog Devices datasheet for charge-pump capacitor selection, layout, and logic-level compatibility. Keep charge-pump traces short, place their capacitors close to the designated pins, and use the manufacturer-recommended bypass capacitance at the 5 V supply. Confirm receiver thresholds for the external logic family and account for the propagation delay and slew behavior of the selected data rate.

This product page combines the ADM207 family specifications, package and ordering information, drop-in comparison details, and practical interface-design guidance. The resulting engineering reference helps designers evaluate the ADM207ARSZ for compact 5 V RS-232 designs while identifying the exact differences that matter when reviewing an alternative.

এর জন্য ড্রপ-ইন বিকল্প ADM207ARSZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADM207ARSZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Charge-Pump Capacitor Value, Maximum Data Rate, Product Type, Supply Voltage.

Analog Devices
Charge-Pump Capacitor Value: 0.1 µF
Maximum Data Rate: 120 kbit/s
Product Type: RS-232 line-driver and receiver transceiver
এর সাথে তুলনা করুন ADM207ARSZ →

ADM207ARS

✅ ড্রপ-ইন
Analog Devices
📦 24-lead SSOP
RS-232 line-driver and receiver transceiver · +5 V · 5 · 3 · 120 kbit/s · 0.1 µF · 9 V · 30 V maximum

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADM207ARSZ বিশেষণ

Product Type RS-232 transceiver
Number of Drivers 5 drivers
Number of Receivers 3 receivers
সাপ্লাই ভোল্টেজ 5 V
Maximum Data Rate 200 kbps
Charge-Pump Capacitor Value 0.1 µF minimum, 10 µF maximum
RS-232 Output Swing Approximately ±9 V
Low-Power Dissipation 15 mW
Interface Standard EIA-232-E and V.28
Receiver Input Voltage Rating ±30 V
প্যাকেজ 24-lead SSOP
মাউন্টিং টাইপ Surface mount
Technology 5 V powered CMOS
On-Board DC-to-DC Converter Yes
Latch-Up Latch-up free
Pin Compatibility Compatible with MAX206 through MAX211 and MAX213 families

ADM207ARSZ 24-lead ssop পিন কনফিগারেশন গাইড

ADM207ARSZ (24-lead ssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADM207ARSZ-এর জন্য 24-lead ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM207ARSZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADM207ARSZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Controllers, Data Acquisition Systems, Test and Measurement Instruments, Point-of-Sale Terminals, Embedded Control Systems, Communication Port Concentrators.

🏭

Industrial Serial Controllers

The ADM207ARSZ is well suited to industrial serial controllers that need several RS-232 outputs and several returned status signals from one 5 V device. Its five drivers can operate multiple command or data channels, while the three receivers can monitor acknowledgments, equipment status, or interlock lines. Operation up to 200 kbps supports conventional short-range equipment links, and the integrated dc-to-DC converter removes the need for a separate ±12 V source. Place the 0.1 µF minimum charge-pump capacitors close to their pins and maintain the 5 V bypass path recommended by the manufacturer.

📟

Data Acquisition Systems

Data-acquisition front ends can use the ADM207ARSZ to connect a controller to external RS-232 instruments while keeping the system power architecture simple. The five drivers support multiple outbound data or control paths, and the three receivers support returned measurements, acknowledgments, or status flags. A 200 kbps maximum rate is appropriate for many laboratory and industrial instrument protocols. The single 5 V operation is particularly useful where a bipolar ±12 V rail would increase design complexity, while the internal charge-pump converter still provides approximately ±9 V RS-232 output swing.

🔧

Test and Measurement Instruments

The ADM207ARSZ fits test and measurement instruments that expose a legacy RS-232 control interface while operating from a 5 V logic supply. Five transmitter channels can manage commands, triggers, or report streams, while three receiver channels handle acknowledgments and remote status. Its 200 kbps capability is sufficient for many instrument-control protocols that prioritize reliability over maximum throughput. Because the device is not isolated, installations requiring ground-loop prevention or high-voltage protection should add the appropriate external protection and isolation circuitry.

🖥️

Point-of-Sale Terminals

Point-of-sale equipment can use the ADM207ARSZ to support multiple peripherals that communicate over RS-232 from a compact controller board. The five drivers provide ample outbound connectivity for service displays, scanners, or receipt equipment, while three receivers support returned control signals. A single 5 V supply simplifies power design in space-constrained terminals, and the 200 kbps rate is suitable for typical short cable runs. Designers should still budget for connector protection, ground referencing, and transient voltage compliance for the target installation environment.

🧩

Embedded Control Systems

The ADM207ARSZ is appropriate for embedded controllers that must bridge a modern CMOS logic section to older RS-232 equipment. It consolidates five drivers and three receivers into one 24-SSOP package, reducing the number of separate line-interface components. Operating from 5 V allows the interface to share the logic supply when appropriate, and the integrated dc-to-DC converter generates the approximately ±9 V levels expected by RS-232 equipment. The resulting design should follow the datasheet layout for charge-pump capacitors, supply bypass, and exposed RS-232 connector pins.

🌐

Communication Port Concentrators

A port concentrator can use the ADM207ARSZ to consolidate several RS-232 links without requiring five separate driver packages and three separate receiver packages. Its 5/3 arrangement is useful for asymmetrical equipment connections where more channels transmit than receive. The 200 kbps maximum rate suits conventional control and status traffic rather than high-speed continuous data. Integrating the device into a concentrator also requires careful charge-pump placement and consideration of shared return paths, particularly when multiple unshielded RS-232 cables leave the enclosure.

What is the ADM207ARSZ?
The ADM207ARSZ is a 5 V powered CMOS RS-232 transceiver containing five line drivers and three line receivers in a 24-lead SSOP package. According to the Analog Devices ADM207 product page, it supports EIA-232-E and V.28 communications interfaces at rates up to 200 kbps. Its integrated on-board dc-to-DC converter produces approximately ±9 V output swing from a single 5 V supply, eliminating the need for an external ±12 V rail.
Where can I download the ADM207ARSZ datasheet PDF?
The official ADM207ARSZ datasheet can be obtained from the Analog Devices ADM207 product page at https://www.analog.com/en/products/adm207.html. The manufacturer page identifies the device as a 0.1 µF, +5 V CMOS RS-232 transceiver with five drivers and three receivers. It also provides the family data sheet and product-selection information needed to confirm the 24-SSOP configuration, charge-pump requirements, and electrical characteristics before design release.
Where can I find the ADM207ARSZ pinout?
The ADM207ARSZ pinout is shown in the pin-configuration section of the Analog Devices ADM207 datasheet, available from the official product page. The device uses a 24-lead SSOP with five RS-232 driver outputs, three receiver inputs, charge-pump capacitor connections, 5 V supply, and ground. Use the manufacturer drawing when assigning PCB nets because it also identifies the exposed package dimensions and recommended land pattern.
What is the maximum data rate of the ADM207ARSZ?
The ADM207ARSZ supports a maximum data rate of 200 kbps when operated from a single 5 V supply. The Analog Devices ADM207 product page identifies the part as a +5 V CMOS RS-232 transceiver, and the family documentation specifies operation up to 200 kbps. This rate suits short-distance RS-232 equipment links, while system timing must also account for transmitter enable delays and receiver propagation delay.
Does the ADM207ARSZ need positive and negative power supplies?
No. The ADM207ARSZ operates from a single 5 V supply and uses an on-board dc-to-DC converter to generate the positive and negative voltages required by RS-232 drivers. According to the Analog Devices ADM207 documentation, output swing reaches approximately ±9 V. The external charge-pump network requires capacitors between 0.1 µF and 10 µF, allowing a simplified power design without a separate ±12 V rail.
What charge-pump capacitors should I use with the ADM207ARSZ?
The ADM207ARSZ supports external charge-pump capacitors in the range of 0.1 µF to 10 µF. The Analog Devices ADM207 family documentation identifies 0.1 µF as the standard minimum value and permits values up to 10 µF for design-specific charge-pump requirements. Place the selected capacitors close to their assigned pins and follow the manufacturer layout guidance to minimize switching noise and maintain reliable voltage generation.
How many RS-232 drivers and receivers does the ADM207ARSZ contain?
The ADM207ARSZ contains five RS-232 drivers and three RS-232 receivers. This 5/3 arrangement is confirmed by the Analog Devices ADM207 product page and the distributor product descriptions. It allows one package to support several outbound channels and three inbound signals, making the device useful for systems that require more than one RS-232 line in each direction or additional handshake monitoring.
Where can I buy ADM207ARSZ online?
Use the Request a Quote form on this page to ask for ADM207ARSZ availability, order quantity, and current commercial terms. The form is the appropriate route for a quote-first electronic component purchase because inventory and pricing can change quickly. The product is identified by its exact 24-lead SSOP ordering code, ADM207ARSZ, so include that MPN in the request to avoid confusion with the non-Z ADM207ARS ordering code.
What is the current price of ADM207ARSZ?
Current ADM207ARSZ pricing is obtained through the Request a Quote form on this page rather than from a static price table. The form accepts the exact MPN ADM207ARSZ and can clarify unit pricing, quantity breaks, stock position, and shipment terms. This approach is useful because RS-232 interface IC pricing and availability may change with market conditions, production allocation, and requested packaging quantity.
What is the lead time and stock status for ADM207ARSZ?
Request the current ADM207ARSZ lead time, minimum order quantity, and stock status through the Request a Quote form on this page. The form connects the request to the exact ADM207ARSZ ordering code and lets the supplier confirm allocation at the requested quantity. Because production status and logistics can change, a current quotation is more reliable than a fixed stock or lead-time statement.
Is ADM207ARSZ the same as ADM207ARS?
The ADM207ARSZ and ADM207ARS are both 5/3 RS-232 transceivers in a 24-SSOP package, but their ordering codes are not interchangeable without checking the manufacturer suffix definitions. The ADM207ARSZ is the subject of this page, while ADM207ARS appears as a separate listing. Confirm the ordering-code, packaging, and marking requirements in the Analog Devices product documentation before treating either device as a substitute.
What can replace the ADM207ARSZ?
The ADM207ARS is the closest same-family option identified in the product listings, but it must be checked against the exact suffix requirements before substitution. The Analog Devices ADM207 documentation also states that the ADM207 is pin compatible with the MAX206 through MAX211 and MAX213 families. However, an exact MAX device with the same 24-SSOP footprint, 5/3 channel count, and electrical limits was not established, so use the manufacturer cross-reference before assigning a specific alternative MPN.
When should I choose the ADM207ARSZ instead of another RS-232 transceiver?
Choose the ADM207ARSZ when the design needs five drivers, three receivers, a single 5 V supply, and operation up to 200 kbps in a 24-lead SSOP. Its integrated charge-pump function avoids a separate ±12 V supply and is especially useful for compact embedded and industrial equipment. Select another device when the design requires a different channel count, lower power with shutdown, isolated signaling, or a package that cannot be changed.
Is the ADM207ARSZ suitable for industrial RS-232 equipment?
The ADM207ARSZ is suitable for many industrial RS-232 interfaces because it combines a 5 V supply, five drivers, three receivers, and operation up to 200 kbps in a 24-SSOP package. Its integrated charge-pump converter simplifies systems without ±12 V rails. For deployment in a particular industrial environment, verify the device's specified operating-temperature grade, isolation requirements, ESD expectations, and regulatory needs before finalizing the design.
What are the key specifications engineers should know about the ADM207ARSZ?
The key ADM207ARSZ specifications are a 5 V supply, five drivers, three receivers, 200 kbps maximum data rate, approximately ±9 V RS-232 output swing, and a 24-lead SSOP package. The Analog Devices ADM207 documentation also identifies 0.1 µF to 10 µF charge-pump capacitors, low power of 15 mW, latch-up-free operation, and pin compatibility with the MAX206 through MAX211 and MAX213 families. Verify exact limits against the current manufacturer datasheet.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM207ARSZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADM207ARSZ when the board already uses the exact 24-SSOP ADM207 footprint and needs five RS-232 drivers, three receivers, a single 5 V supply, and data rates up to 200 kbps. Its integrated dc-to-DC converter is valuable when a separate ±12 V supply would complicate the design. The ADM207ARS is a close same-family candidate, but its ordering suffix must be checked before substitution because the exact Z-code requirements should not be inferred from the shared 5/3 configuration. The manufacturer documentation also states pin compatibility with the MAX206 through MAX211 and MAX213 families; however, a specific cross-brand MPN should only be selected after confirming the same 24-SSOP footprint, channel count, pin functions, supply voltage, and shutdown behavior. For designs requiring galvanic isolation, very low standby power with shutdown, or a channel count other than 5/3, select a different interface architecture rather than forcing a drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADM207ARS
Package 24-lead SSOP 24-lead SSOP
Brand Analog Devices Analog Devices
Device Type RS-232 transceiver RS-232 transceiver
Number of Drivers 5 5
Number of Receivers 3 3
Supply Voltage 5 V 5 V
Maximum Data Rate 200 kbps 200 kbps
RS-232 Output Swing Approximately ±9 V Approximately ±9 V
Charge-Pump Capacitor Range 0.1 µF to 10 µF 0.1 µF to 10 µF
Low-Power Dissipation 15 mW 15 mW

মূল পার্থক্যসমূহ

  • Five-driver and three-receiver integration (বনামADM207ARS)
  • Single 5 V interface architecture (বনামADM207ARS)
  • 24-SSOP footprint compatibility (বনামADM207ARS)

ডিজাইন নোট

Place the charge-pump capacitors directly across the pins designated by the Analog Devices ADM207 datasheet, using short traces and a common return path. The documented operating range is 0.1 µF to 10 µF, with 0.1 µF shown as the standard family value. Keep the 5 V supply bypass capacitor close to the device and avoid routing charge-pump currents through the ground region of sensitive receiver inputs.

Treat each RS-232 driver output and receiver input as an external interface net even when the connector is on the same board. Route these nets away from clocks, switching supplies, and precision analog inputs, and provide a direct chassis or board-ground return as required by the system grounding strategy. The internal dc-to-DC converter can couple charge-pump energy into adjacent circuitry if its capacitor connections are not placed according to the manufacturer layout.

Do not substitute ADM207ARS, ADM207ARSZ-REEL, or a MAX-family member solely from a partial family comparison. Verify the exact ordering suffix, 5/3 channel arrangement, 24-SSOP footprint, supply voltage, charge-pump pinout, and data-rate rating. A tape-and-reel suffix identifies packaging logistics rather than a different electrical function, but it still must match the purchasing format and board-handling requirements.

Use receiver inputs only with signals that remain within the documented ±30 V input range and satisfy the EIA-232-E and V.28 receiver thresholds. Although the receiver circuitry is latch-up free, external protection may still be needed for cables exposed to industrial transients. Confirm propagation delay and transition behavior against the protocol timing, especially when operating near the 200 kbps maximum rate.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose RS-232 transceiver.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADM207ARSZ datasheet ADM207ARSZ datasheet pdf ADM207ARSZ pinout ADM207ARSZ 24-SSOP ADM207ARSZ specifications ADM207ARSZ equivalent ADM207ARSZ replacement ADM207ARSZ cross reference ADM207ARSZ price ADM207ARSZ stock Analog Devices ADM207ARSZ ADM207ARSZ vs ADM207ARS ADM207 5V RS-232 transceiver ADM207ARSZ industrial RS-232

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADM207ARSZ ADM207ARS ADM207 RS-232 transceiver line driver line receiver CMOS EIA-232-E V.28 MAX206 MAX211 MAX213 5 V power supply 200 kbps charge-pump capacitor dc-to-DC converter ±9 V output swing 24-lead SSOP SSOP family surface-mount package industrial automation test and measurement data acquisition interface IC semiconductor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন