ADM207ARSZ - 5V 5/3 RS-232 Transceiver | Analog Devices
MPN: ADM207ARSZ ✓ NakahandaADM207ARSZ Ulas
An RS-232 transceiver is an interface circuit that combines digital line drivers and receivers for serial communication using EIA-232 signaling. It belongs to the interface-IC hierarchy, where transceiver functions bridge a CMOS or TTL logic system and a differential, bipolar-voltage communications network. ADM2xx devices are designed for RS-232 links in industrial equipment, computers, instrumentation, and embedded control systems.
The five-driver and three-receiver configuration supports multiple serial ports or asymmetric data paths in one package. Its 200 kbps capability is suitable for short-distance serial links, while the integrated charge-pump circuitry eliminates the need for a separate ±12 V power source. According to the Analog Devices ADM207 product page, the ADM207 supports 5 V operation and 0.1 µF external charge-pump capacitors.
The ADM207 family uses CMOS drivers and receivers to provide low-power RS-232 operation. The manufacturer lists low power at 15 mW, approximately ±9 V output swing, and compatibility with the MAX206 through MAX211 and MAX213 families. Unlike designs requiring a negative supply, this transceiver derives positive and negative RS-232 levels internally, simplifying system power architecture while adding external charge-pump capacitors.
Typical uses include industrial serial controllers, test equipment, data acquisition systems, POS terminals, and embedded instruments. The three receivers can monitor handshake, status, or acknowledgment lines, while the five drivers support multiple outgoing RS-232 channels. Systems with a strict 24-SSOP footprint and up to 200 kbps operation can use the ADM207ARSZ without changing their existing interface layout.
Designers should follow the Analog Devices datasheet for charge-pump capacitor selection, layout, and logic-level compatibility. Keep charge-pump traces short, place their capacitors close to the designated pins, and use the manufacturer-recommended bypass capacitance at the 5 V supply. Confirm receiver thresholds for the external logic family and account for the propagation delay and slew behavior of the selected data rate.
This product page combines the ADM207 family specifications, package and ordering information, drop-in comparison details, and practical interface-design guidance. The resulting engineering reference helps designers evaluate the ADM207ARSZ for compact 5 V RS-232 designs while identifying the exact differences that matter when reviewing an alternative.
Mga alternatibo na pwedeng ilagay na ADM207ARSZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ADM207ARSZ (parehas na form factor at footprint) — pagkakaiba sa Charge-Pump Capacitor Value, Maximum Data Rate, Product Type, Supply Voltage.
ADM207ARS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ADM207ARSZ Mga Spesipikasyon
| Product Type | RS-232 transceiver |
| Number of Drivers | 5 drivers |
| Number of Receivers | 3 receivers |
| Volte ng Pagbibigay | 5 V |
| Maximum Data Rate | 200 kbps |
| Charge-Pump Capacitor Value | 0.1 µF minimum, 10 µF maximum |
| RS-232 Output Swing | Approximately ±9 V |
| Low-Power Dissipation | 15 mW |
| Interface Standard | EIA-232-E and V.28 |
| Receiver Input Voltage Rating | ±30 V |
| Packhaging | 24-lead SSOP |
| Uri ng Pagpapasok | Surface mount |
| Technology | 5 V powered CMOS |
| On-Board DC-to-DC Converter | Yes |
| Latch-Up | Latch-up free |
| Pin Compatibility | Compatible with MAX206 through MAX211 and MAX213 families |
Gabay sa Pin Configuration ng ADM207ARSZ 24-lead ssop
Pin configuration para sa ADM207ARSZ (24-lead ssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ADM207ARSZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ADM207ARSZ ay nararapat para sa 6 aplikasyons: Industrial Serial Controllers, Data Acquisition Systems, Test and Measurement Instruments, Point-of-Sale Terminals, Embedded Control Systems, Communication Port Concentrators.
Industrial Serial Controllers
The ADM207ARSZ is well suited to industrial serial controllers that need several RS-232 outputs and several returned status signals from one 5 V device. Its five drivers can operate multiple command or data channels, while the three receivers can monitor acknowledgments, equipment status, or interlock lines. Operation up to 200 kbps supports conventional short-range equipment links, and the integrated dc-to-DC converter removes the need for a separate ±12 V source. Place the 0.1 µF minimum charge-pump capacitors close to their pins and maintain the 5 V bypass path recommended by the manufacturer.
Inirekomenda
Data Acquisition Systems
Data-acquisition front ends can use the ADM207ARSZ to connect a controller to external RS-232 instruments while keeping the system power architecture simple. The five drivers support multiple outbound data or control paths, and the three receivers support returned measurements, acknowledgments, or status flags. A 200 kbps maximum rate is appropriate for many laboratory and industrial instrument protocols. The single 5 V operation is particularly useful where a bipolar ±12 V rail would increase design complexity, while the internal charge-pump converter still provides approximately ±9 V RS-232 output swing.
Inirekomenda
Test and Measurement Instruments
The ADM207ARSZ fits test and measurement instruments that expose a legacy RS-232 control interface while operating from a 5 V logic supply. Five transmitter channels can manage commands, triggers, or report streams, while three receiver channels handle acknowledgments and remote status. Its 200 kbps capability is sufficient for many instrument-control protocols that prioritize reliability over maximum throughput. Because the device is not isolated, installations requiring ground-loop prevention or high-voltage protection should add the appropriate external protection and isolation circuitry.
Inirekomenda
Point-of-Sale Terminals
Point-of-sale equipment can use the ADM207ARSZ to support multiple peripherals that communicate over RS-232 from a compact controller board. The five drivers provide ample outbound connectivity for service displays, scanners, or receipt equipment, while three receivers support returned control signals. A single 5 V supply simplifies power design in space-constrained terminals, and the 200 kbps rate is suitable for typical short cable runs. Designers should still budget for connector protection, ground referencing, and transient voltage compliance for the target installation environment.
Inirekomenda
Embedded Control Systems
The ADM207ARSZ is appropriate for embedded controllers that must bridge a modern CMOS logic section to older RS-232 equipment. It consolidates five drivers and three receivers into one 24-SSOP package, reducing the number of separate line-interface components. Operating from 5 V allows the interface to share the logic supply when appropriate, and the integrated dc-to-DC converter generates the approximately ±9 V levels expected by RS-232 equipment. The resulting design should follow the datasheet layout for charge-pump capacitors, supply bypass, and exposed RS-232 connector pins.
Inirekomenda
Communication Port Concentrators
A port concentrator can use the ADM207ARSZ to consolidate several RS-232 links without requiring five separate driver packages and three separate receiver packages. Its 5/3 arrangement is useful for asymmetrical equipment connections where more channels transmit than receive. The 200 kbps maximum rate suits conventional control and status traffic rather than high-speed continuous data. Integrating the device into a concentrator also requires careful charge-pump placement and consideration of shared return paths, particularly when multiple unshielded RS-232 cables leave the enclosure.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ADM207ARSZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ADM207ARS |
|---|---|---|
| Package | 24-lead SSOP | 24-lead SSOP |
| Brand | Analog Devices | Analog Devices |
| Device Type | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 5 | 5 |
| Number of Receivers | 3 | 3 |
| Supply Voltage | 5 V | 5 V |
| Maximum Data Rate | 200 kbps | 200 kbps |
| RS-232 Output Swing | Approximately ±9 V | Approximately ±9 V |
| Charge-Pump Capacitor Range | 0.1 µF to 10 µF | 0.1 µF to 10 µF |
| Low-Power Dissipation | 15 mW | 15 mW |
Pangunahing mga Pagkakaiba
- Five-driver and three-receiver integration (kumpara saADM207ARS)
- Single 5 V interface architecture (kumpara saADM207ARS)
- 24-SSOP footprint compatibility (kumpara saADM207ARS)
Talaan ng Disenyo
Place the charge-pump capacitors directly across the pins designated by the Analog Devices ADM207 datasheet, using short traces and a common return path. The documented operating range is 0.1 µF to 10 µF, with 0.1 µF shown as the standard family value. Keep the 5 V supply bypass capacitor close to the device and avoid routing charge-pump currents through the ground region of sensitive receiver inputs.
Treat each RS-232 driver output and receiver input as an external interface net even when the connector is on the same board. Route these nets away from clocks, switching supplies, and precision analog inputs, and provide a direct chassis or board-ground return as required by the system grounding strategy. The internal dc-to-DC converter can couple charge-pump energy into adjacent circuitry if its capacitor connections are not placed according to the manufacturer layout.
Do not substitute ADM207ARS, ADM207ARSZ-REEL, or a MAX-family member solely from a partial family comparison. Verify the exact ordering suffix, 5/3 channel arrangement, 24-SSOP footprint, supply voltage, charge-pump pinout, and data-rate rating. A tape-and-reel suffix identifies packaging logistics rather than a different electrical function, but it still must match the purchasing format and board-handling requirements.
Use receiver inputs only with signals that remain within the documented ±30 V input range and satisfy the EIA-232-E and V.28 receiver thresholds. Although the receiver circuitry is latch-up free, external protection may still be needed for cables exposed to industrial transients. Confirm propagation delay and transition behavior against the protocol timing, especially when operating near the 200 kbps maximum rate.
Impormasyon ng Pagsunod sa Kautusan
The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose RS-232 transceiver.