ADM207ARSZ - 5V 5/3 RS-232 Transceiver | Analog Devices
MPN: ADM207ARSZ ✓ فعالADM207ARSZ جائزہ
An RS-232 transceiver is an interface circuit that combines digital line drivers and receivers for serial communication using EIA-232 signaling. It belongs to the interface-IC hierarchy, where transceiver functions bridge a CMOS or TTL logic system and a differential, bipolar-voltage communications network. ADM2xx devices are designed for RS-232 links in industrial equipment, computers, instrumentation, and embedded control systems.
The five-driver and three-receiver configuration supports multiple serial ports or asymmetric data paths in one package. Its 200 kbps capability is suitable for short-distance serial links, while the integrated charge-pump circuitry eliminates the need for a separate ±12 V power source. According to the Analog Devices ADM207 product page, the ADM207 supports 5 V operation and 0.1 µF external charge-pump capacitors.
The ADM207 family uses CMOS drivers and receivers to provide low-power RS-232 operation. The manufacturer lists low power at 15 mW, approximately ±9 V output swing, and compatibility with the MAX206 through MAX211 and MAX213 families. Unlike designs requiring a negative supply, this transceiver derives positive and negative RS-232 levels internally, simplifying system power architecture while adding external charge-pump capacitors.
Typical uses include industrial serial controllers, test equipment, data acquisition systems, POS terminals, and embedded instruments. The three receivers can monitor handshake, status, or acknowledgment lines, while the five drivers support multiple outgoing RS-232 channels. Systems with a strict 24-SSOP footprint and up to 200 kbps operation can use the ADM207ARSZ without changing their existing interface layout.
Designers should follow the Analog Devices datasheet for charge-pump capacitor selection, layout, and logic-level compatibility. Keep charge-pump traces short, place their capacitors close to the designated pins, and use the manufacturer-recommended bypass capacitance at the 5 V supply. Confirm receiver thresholds for the external logic family and account for the propagation delay and slew behavior of the selected data rate.
This product page combines the ADM207 family specifications, package and ordering information, drop-in comparison details, and practical interface-design guidance. The resulting engineering reference helps designers evaluate the ADM207ARSZ for compact 5 V RS-232 designs while identifying the exact differences that matter when reviewing an alternative.
کے لیے ڈراپ اِن متبادل ADM207ARSZ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADM207ARSZ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Charge-Pump Capacitor Value, Maximum Data Rate, Product Type, Supply Voltage.
ADM207ARS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ADM207ARSZ تفصیلات
| Product Type | RS-232 transceiver |
| Number of Drivers | 5 drivers |
| Number of Receivers | 3 receivers |
| سپلائی وولٹیج | 5 V |
| Maximum Data Rate | 200 kbps |
| Charge-Pump Capacitor Value | 0.1 µF minimum, 10 µF maximum |
| RS-232 Output Swing | Approximately ±9 V |
| Low-Power Dissipation | 15 mW |
| Interface Standard | EIA-232-E and V.28 |
| Receiver Input Voltage Rating | ±30 V |
| پیکیج | 24-lead SSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Technology | 5 V powered CMOS |
| On-Board DC-to-DC Converter | Yes |
| Latch-Up | Latch-up free |
| Pin Compatibility | Compatible with MAX206 through MAX211 and MAX213 families |
ADM207ARSZ 24-lead ssop پن کنفیگریشن گائیڈ
ADM207ARSZ (24-lead ssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADM207ARSZ.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ADM207ARSZ کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Serial Controllers, Data Acquisition Systems, Test and Measurement Instruments, Point-of-Sale Terminals, Embedded Control Systems, Communication Port Concentrators.
Industrial Serial Controllers
The ADM207ARSZ is well suited to industrial serial controllers that need several RS-232 outputs and several returned status signals from one 5 V device. Its five drivers can operate multiple command or data channels, while the three receivers can monitor acknowledgments, equipment status, or interlock lines. Operation up to 200 kbps supports conventional short-range equipment links, and the integrated dc-to-DC converter removes the need for a separate ±12 V source. Place the 0.1 µF minimum charge-pump capacitors close to their pins and maintain the 5 V bypass path recommended by the manufacturer.
تجویز کردہ
Data Acquisition Systems
Data-acquisition front ends can use the ADM207ARSZ to connect a controller to external RS-232 instruments while keeping the system power architecture simple. The five drivers support multiple outbound data or control paths, and the three receivers support returned measurements, acknowledgments, or status flags. A 200 kbps maximum rate is appropriate for many laboratory and industrial instrument protocols. The single 5 V operation is particularly useful where a bipolar ±12 V rail would increase design complexity, while the internal charge-pump converter still provides approximately ±9 V RS-232 output swing.
تجویز کردہ
Test and Measurement Instruments
The ADM207ARSZ fits test and measurement instruments that expose a legacy RS-232 control interface while operating from a 5 V logic supply. Five transmitter channels can manage commands, triggers, or report streams, while three receiver channels handle acknowledgments and remote status. Its 200 kbps capability is sufficient for many instrument-control protocols that prioritize reliability over maximum throughput. Because the device is not isolated, installations requiring ground-loop prevention or high-voltage protection should add the appropriate external protection and isolation circuitry.
تجویز کردہ
Point-of-Sale Terminals
Point-of-sale equipment can use the ADM207ARSZ to support multiple peripherals that communicate over RS-232 from a compact controller board. The five drivers provide ample outbound connectivity for service displays, scanners, or receipt equipment, while three receivers support returned control signals. A single 5 V supply simplifies power design in space-constrained terminals, and the 200 kbps rate is suitable for typical short cable runs. Designers should still budget for connector protection, ground referencing, and transient voltage compliance for the target installation environment.
تجویز کردہ
Embedded Control Systems
The ADM207ARSZ is appropriate for embedded controllers that must bridge a modern CMOS logic section to older RS-232 equipment. It consolidates five drivers and three receivers into one 24-SSOP package, reducing the number of separate line-interface components. Operating from 5 V allows the interface to share the logic supply when appropriate, and the integrated dc-to-DC converter generates the approximately ±9 V levels expected by RS-232 equipment. The resulting design should follow the datasheet layout for charge-pump capacitors, supply bypass, and exposed RS-232 connector pins.
تجویز کردہ
Communication Port Concentrators
A port concentrator can use the ADM207ARSZ to consolidate several RS-232 links without requiring five separate driver packages and three separate receiver packages. Its 5/3 arrangement is useful for asymmetrical equipment connections where more channels transmit than receive. The 200 kbps maximum rate suits conventional control and status traffic rather than high-speed continuous data. Integrating the device into a concentrator also requires careful charge-pump placement and consideration of shared return paths, particularly when multiple unshielded RS-232 cables leave the enclosure.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ADM207ARSZ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ADM207ARS |
|---|---|---|
| Package | 24-lead SSOP | 24-lead SSOP |
| Brand | Analog Devices | Analog Devices |
| Device Type | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 5 | 5 |
| Number of Receivers | 3 | 3 |
| Supply Voltage | 5 V | 5 V |
| Maximum Data Rate | 200 kbps | 200 kbps |
| RS-232 Output Swing | Approximately ±9 V | Approximately ±9 V |
| Charge-Pump Capacitor Range | 0.1 µF to 10 µF | 0.1 µF to 10 µF |
| Low-Power Dissipation | 15 mW | 15 mW |
اہم امتیازی خصوصیات
- Five-driver and three-receiver integration (بمقابلہADM207ARS)
- Single 5 V interface architecture (بمقابلہADM207ARS)
- 24-SSOP footprint compatibility (بمقابلہADM207ARS)
ڈیزائن نوٹس
Place the charge-pump capacitors directly across the pins designated by the Analog Devices ADM207 datasheet, using short traces and a common return path. The documented operating range is 0.1 µF to 10 µF, with 0.1 µF shown as the standard family value. Keep the 5 V supply bypass capacitor close to the device and avoid routing charge-pump currents through the ground region of sensitive receiver inputs.
Treat each RS-232 driver output and receiver input as an external interface net even when the connector is on the same board. Route these nets away from clocks, switching supplies, and precision analog inputs, and provide a direct chassis or board-ground return as required by the system grounding strategy. The internal dc-to-DC converter can couple charge-pump energy into adjacent circuitry if its capacitor connections are not placed according to the manufacturer layout.
Do not substitute ADM207ARS, ADM207ARSZ-REEL, or a MAX-family member solely from a partial family comparison. Verify the exact ordering suffix, 5/3 channel arrangement, 24-SSOP footprint, supply voltage, charge-pump pinout, and data-rate rating. A tape-and-reel suffix identifies packaging logistics rather than a different electrical function, but it still must match the purchasing format and board-handling requirements.
Use receiver inputs only with signals that remain within the documented ±30 V input range and satisfy the EIA-232-E and V.28 receiver thresholds. Although the receiver circuitry is latch-up free, external protection may still be needed for cables exposed to industrial transients. Confirm propagation delay and transition behavior against the protocol timing, especially when operating near the 200 kbps maximum rate.
تعمیل کی معلومات
The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this general-purpose RS-232 transceiver.