Analog Devices

ADM3063EARZ - 500kbps Full-Duplex RS-485 | Analog Devices

MPN: ADM3063EARZ ✓ সক্রিয়
3.0 V to 5.5 V Vdss 14-lead SOIC_N Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADM3063EARZ সারাংশ

Analog Devices ADM3063EARZ is a 500 kbps full-duplex RS-485 transceiver operating from a 3.0 V to 5.5 V supply and housed in a 14-lead SOIC package. The device supports a 1.62 V to 5.5 V VIO logic supply option and provides enhanced bus-pin ESD protection, including IEC 61000-4-2 contact discharge of at least ±12 kV. These attributes position it as a communication interface IC within the RS-485 transceiver, interface IC, and industrial communication hierarchy.

An RS-485 transceiver combines a differential line driver and differential receiver into one physical-layer interface. The driver converts a logic-level signal into a balanced differential bus output, while the receiver converts differential bus voltage into a logic-level signal. Full-duplex operation uses separate differential transmit and receive paths, allowing a device to transmit and receive simultaneously. TIA/EIA RS-485 compliance across the complete supply range helps maintain defined bus behavior as the supply changes.

The ADM3063E family's principal features include 3.0 V to 5.5 V operation, a selectable 1.62 V to 5.5 V VIO option, and ±12 kV IEC ESD protection on the bus pins. A 500 kbps data rate supports factory automation, industrial control, building systems, and instrumentation links. The separate VIO supply allows the digital interface voltage to be selected independently from the transceiver supply, simplifying integration with processors operating at lower logic levels.

The manufacturer describes the ADM3063E as suitable for new designs and indicates that it is fully compatible with hot-swapping power-up and power-down without introducing glitches. Its protection features are aimed at industrial wiring where cables and external equipment can expose the interface to electrostatic discharge. The 14-lead SOIC_N package is a conventional surface-mount industrial option, while the family's related devices are also offered in smaller 8-lead and 10-lead packages and in LFCSP packages.

Typical applications include full-duplex industrial RS-485 links, programmable logic controller communication, factory automation equipment, building-control networks, and embedded instrumentation. The 500 kbps maximum signaling rate is appropriate for moderate-distance bus networks and point-to-point full-duplex links where simultaneous transmission and reception are required. The product family is also suitable for designs requiring hot-plug behavior when connected equipment is powered up or removed.

PCB implementation should preserve the transceiver's supply and logic pin assignments, place decoupling capacitors close to the device, and route the differential bus as a controlled impedance pair. External protection, termination, and biasing remain topology-dependent and should be designed against the actual cable length, node count, grounding method, and required common-mode margin. The manufacturer datasheet and pin-description table should govern final board connections.

This product data combines the manufacturer's device positioning with verified package, voltage, speed, ESD, lifecycle, and environmental information. It also organizes drop-in family alternatives, parameter comparisons, interface design notes, and application guidance so engineers can evaluate the ADM3063EARZ against the electrical and mechanical requirements of a specific RS-485 design.

এর জন্য ড্রপ-ইন বিকল্প ADM3063EARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ADM3063EARZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Interface Standard, Operating Temperature Range, Package, RoHS Status.

Analog Devices
Interface Standard: EIA-485 RS-485
Operating Temperature Range: -40 °C to +85 °C
Package: 14-lead SOIC, 0.154 inch (3.90 mm) width
এর সাথে তুলনা করুন ADM3063EARZ →

ADM3063EBRZ-R7

✅ ড্রপ-ইন
📦 SOIC-14
Same 500 kbps full-duplex RS-485 architecture and 14-lead SOIC footprint; ordering suffix changes the small-reel tape orientation rather than the core electrical ratings.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM3063EARZ-R7

✅ ড্রপ-ইন
📦 SOIC-14
Same 500 kbps full-duplex interface, 3.0 V to 5.5 V VCC range, 1.62 V to 5.5 V VIO option, and SOIC-14 footprint; -R7 denotes the rear-tape small-reel shipping option.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM3064EARZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 SOIC-14
1/1 transceiver · EIA-485 RS-485 · 1 driver and 1 receiver · 3.0 V to 5.5 V · 500 kbps · 50 Mbps · ±12 kV IEC ESD protected · 800 ns

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ADM3065EARZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-14
Same ADM306xE 14-lead SOIC family and 3.0 V to 5.5 V supply class; channel arrangement and maximum speed must be confirmed against the ADM3065E datasheet before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM3066EARZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-14
Same ADM306xE 14-lead SOIC family and 3.0 V to 5.5 V supply class; exact bus topology, speed, and pin-function compatibility must be confirmed against the ADM3066E datasheet.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM3063EARZ বিশেষণ

Product Type Full-duplex RS-485 transceiver
ডেটা রেট 500 kbps
VCC Operating Voltage Range 3.0 V to 5.5 V
VIO Operating Voltage Range 1.62 V to 5.5 V
Interface Standard TIA/EIA RS-485
Bus Configuration Full duplex
ESD Contact Discharge Protection At least ±12 kV per IEC 61000-4-2
ESD Air Discharge Protection At least ±12 kV per IEC 61000-4-2
HBM ESD Protection At least ±30 kV
প্যাকেজ 14-lead SOIC_N
মাউন্টিং টাইপ Surface mount
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C or -40°C to +125°C, model-dependent
Moisture Sensitivity Level MSL 1
RoHS স্ট্যাটাস RoHS3 compliant
REACH Status Unaffected
Lifecycle Recommendation Recommended for new designs
Hot-Swap Behavior Glitch-free power-up and power-down
Number of Bus Pins 4 bus pins
Number of Leads 14 leads

ADM3063EARZ 14-lead soic_n পিন কনফিগারেশন গাইড

ADM3063EARZ (14-lead soic_n প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ADM3063EARZ-এর জন্য 14-lead soic_n প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM3063EARZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADM3063EARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: PLC Industrial Communication, Factory Automation Equipment, Building Control Network, Industrial Instrumentation, Hot-Pluggable Field Equipment, Embedded Data Acquisition.

🏭

PLC Industrial Communication

The ADM3063EARZ suits a full-duplex PLC communication port requiring 500 kbps RS-485 operation and a separate logic supply for the controller interface. Its 3.0 V to 5.5 V VCC range supports regulated industrial supplies, while the 1.62 V to 5.5 V VIO range can accommodate lower-voltage digital logic. Bus-pin ESD protection of at least ±12 kV for IEC 61000-4-2 contact discharge is valuable when the transceiver connects to field wiring. Use separate transmit and receive pairs, place local decoupling close to the device, and design termination and common-mode protection for the actual cable topology.

⚙️

Factory Automation Equipment

The ADM3063EARZ can connect automation equipment to a full-duplex RS-485 field bus while preserving simultaneous command and response traffic. Its 500 kbps rate is appropriate for moderate-speed machine control and sensor networks, and the 14-lead SOIC_N package supports conventional surface-mount assembly. The specified hot-swap power-up and power-down behavior helps limit unwanted bus disturbance when connected equipment changes power state. External protection should be coordinated with the transceiver's bus-pin ESD rating, and differential routing should use a consistent pair geometry to minimize radiated emissions and susceptibility to industrial interference.

🧩

Building Control Network

For building-control equipment, the ADM3063EARZ provides a full-duplex RS-485 physical interface with logic-voltage flexibility and enhanced ESD protection on externally accessible conductors. The 1.62 V to 5.5 V VIO option supports integration with low-voltage building-controller logic, while the 500 kbps rate is suitable for supervisory control and sensor traffic. The design should maintain a defined reference ground, avoid excessive cable length, and apply termination only where required by the network topology. Protective devices should be placed near the connector so transient energy is diverted before reaching the transceiver.

🔧

Industrial Instrumentation

The ADM3063EARZ fits instrument-to-controller links where both directions of RS-485 data must remain active. A 500 kbps link rate supports measurement commands, status updates, and diagnostic information without requiring the highest bandwidth available from faster transceivers. The independent VIO supply allows the digital side to match the instrument's processor or controller directly, reducing level-shifting components. For reliable operation, place VCC and VIO bypass capacitors at their corresponding pins, route the differential bus away from switching nodes, and verify common-mode voltage at the receiver under worst-case cable and grounding conditions.

🔌

Hot-Pluggable Field Equipment

The ADM3063EARZ is appropriate for field equipment that may be powered up or powered down while connected to a live RS-485 network. Analog Devices specifically describes the ADM3063E family as compatible with hot-swapping without introducing glitches during power-up or power-down. This behavior helps reduce unwanted commands or state changes when a peripheral is inserted or removed. System designers should still control bus enable behavior, maintain the specified supply sequencing, and test the complete interface because external protection components, termination, and connector construction also influence the observed transient performance.

📊

Embedded Data Acquisition

The ADM3063EARZ can serve as the communications interface in a distributed data-acquisition module that exchanges sampled data with a supervisory controller. Full-duplex operation permits continuous command reception while telemetry is transmitted, and the 500 kbps rate is suitable for many sensor and test-data streams. Its 14-lead SOIC_N package provides a straightforward industrial PCB footprint, while the selectable logic supply supports a range of embedded processors. Layout should keep the receiver path away from high-current switching stages, use a solid ground strategy, and follow the datasheet's external network recommendations for biasing and termination.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ADM3063EBRZ-R7 Same-family full-duplex RS-485 interface in SOIC-14 ব্যবহৃত হয়: PLC Industrial Communication, Building Control Network, Hot-Pluggable Field Equipment ADM3063EARZ-R7 Same-family interface with alternate reel ordering ব্যবহৃত হয়: PLC Industrial Communication, Industrial Instrumentation, Embedded Data Acquisition ADM3064EARZ Analog Devices ব্যবহৃত হয়: Factory Automation Equipment, Hot-Pluggable Field Equipment ADM3065EARZ Related ADM306xE industrial interface device ব্যবহৃত হয়: Factory Automation Equipment, Industrial Instrumentation ADM3066EARZ Related ADM306xE communication interface ব্যবহৃত হয়: Building Control Network, Embedded Data Acquisition
What is the operating voltage of ADM3063EARZ?
The ADM3063EARZ operates from 3.0 V to 5.5 V on VCC and accepts a separate VIO logic supply from 1.62 V to 5.5 V. According to the Analog Devices ADM3063E product documentation, the device remains TIA/EIA RS-485 compliant over the full VCC supply range. The independent VIO option lets the digital interface connect to lower-voltage logic while the transceiver core uses a 3.0 V to 5.5 V supply.
What is the maximum data rate of ADM3063EARZ?
The ADM3063EARZ supports data rates up to 500 kbps. Analog Devices identifies the ADM3063E family as a 500 kbps full-duplex RS-485 transceiver, with its VCC operating range specified as 3.0 V to 5.5 V. This rate is suitable for industrial control links and instrumentation where reliable balanced signaling is needed without operating at the maximum rate of faster RS-485 devices.
What is the ADM3063EARZ pinout and package?
The ADM3063EARZ is packaged in a 14-lead SOIC_N surface-mount package and is a single full-duplex RS-485 transceiver. Use the manufacturer datasheet's pin-description table when assigning VCC, VIO, ground, logic, driver, and receiver connections. The available product results confirm the 14-SOIC package, but they do not reproduce every numbered pin name, so the complete pinout should be taken directly from the Analog Devices datasheet before PCB routing.
Where can I download the ADM3063EARZ datasheet PDF?
The official ADM3063E product page at Analog Devices provides the manufacturer documentation for the ADM3063EARZ family. The family datasheet also covers ADM3061E through ADM3068E and is available from Analog Devices' technical-documentation server. Use the manufacturer's pin-description table, electrical characteristics, and application guidance as the controlling references for footprint, supply wiring, bus protection, and operating limits.
What ESD protection does the ADM3063EARZ provide?
The ADM3063EARZ provides enhanced ESD protection on its bus pins, including IEC 61000-4-2 contact discharge of at least ±12 kV and air discharge of at least ±12 kV. Analog Devices also specifies HBM protection of at least ±30 kV. These ratings apply to the protected bus pins and should not be interpreted as immunity for every connector or external wiring condition without a complete system-level assessment.
Where can I buy ADM3063EARZ and check current stock?
Use the Request a Quote form on this page to request current ADM3063EARZ availability, lead time, and order handling from XAIPART. The manufacturer identifies the ADM3063E family as recommended for new designs, and distributor listings identify the exact ADM3063EARZ part as available. Current stock and lead time should be confirmed through the quotation process because they can change with demand and inventory movement.
What is the price of ADM3063EARZ?
The current price of ADM3063EARZ should be requested through the Request a Quote form on this page so the result reflects the exact package suffix, quantity, and current market condition. The part is identified as a 14-lead SOIC_N RS-485 transceiver from Analog Devices. No fixed price should be inferred from general distributor listings because commercial terms and inventory can change without notice.
What is the lead time for ADM3063EARZ?
The current ADM3063EARZ lead time should be confirmed through the Request a Quote form on this page. The exact ordering code is the 14-lead SOIC_N ADM3063EARZ, and the manufacturer lists the ADM3063E family as recommended for new designs. Quote confirmation is the appropriate method for obtaining a current lead time and minimum-order quantity for the requested quantity.
Is ADM3063EARZ in stock?
Use the Request a Quote form on this page for the current ADM3063EARZ stock position. Distributor search listings identify the exact component and indicate that purchases may ship immediately, but availability can change after those listings were captured. A written quotation will also identify the package suffix, quantity, delivery schedule, and any applicable order conditions for the requested order.
What is the difference between ADM3063EARZ and ADM3063EBRZ-R7?
The ADM3063EARZ and ADM3063EBRZ-R7 are identified as 14-lead SOIC versions of the same 3.0 V to 5.5 V, 500 kbps full-duplex RS-485 transceiver family. Their meaningful ordering difference is the rear-tape, small-reel packaging designation rather than a change in the quoted core interface specifications. Both therefore retain the SOIC-14 footprint and offer the same functional family architecture.
When should I choose ADM3063EARZ over another RS-485 transceiver?
Choose the ADM3063EARZ when a design requires a 500 kbps full-duplex RS-485 interface, a 3.0 V to 5.5 V transceiver supply, an independent 1.62 V to 5.5 V logic supply, and enhanced bus-pin ESD protection. According to Analog Devices documentation, the device also supports glitch-free hot-swap power transitions. A different family member should be selected only when its bus topology, speed, supply arrangement, package, or protection requirements are a better match.
Is ADM3063EARZ suitable for industrial automation?
The ADM3063EARZ is suitable for industrial automation interfaces that require 500 kbps full-duplex RS-485 communication and robust protection on externally accessible bus conductors. Its 3.0 V to 5.5 V VCC range, 1.62 V to 5.5 V VIO option, and IEC 61000-4-2 protection of at least ±12 kV are particularly relevant to factory equipment, PLC links, and building-control equipment.
What is the best drop-in replacement for ADM3063EARZ?
The ADM3063EBRZ-R7 is the closest identified drop-in alternative because it uses the same 14-lead SOIC package and belongs to the same 500 kbps full-duplex RS-485 family. The ADM3063EARZ-R7 designation is also associated with the same device family, although it differs primarily in tape-and-reel ordering rather than adding a distinct electrical function. Review the manufacturer ordering guide before substituting suffix codes.
Can ADM3063EARZ replace a generic RS-485 transceiver?
The ADM3063EARZ can replace a compatible RS-485 transceiver only when the existing circuit matches its full-duplex architecture, 14-lead SOIC footprint, supply arrangement, logic levels, and pin functions. A half-duplex transceiver normally requires a shared driver and receiver bus connection and therefore cannot be assumed to be pin-compatible. Verify every numbered connection and the external termination, fail-safe bias, and protection network before substitution.
What are the key specifications of ADM3063EARZ that engineers should know?
The key ADM3063EARZ specifications are a 500 kbps maximum data rate, full-duplex RS-485 operation, a 3.0 V to 5.5 V VCC range, and a 1.62 V to 5.5 V VIO range. The 14-lead SOIC_N package also includes bus-pin protection rated at least ±12 kV for IEC 61000-4-2 contact discharge. Analog Devices also describes glitch-free hot-swap power-up and power-down behavior.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM3063EARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADM3063EARZ for a full-duplex RS-485 interface that must operate at up to 500 kbps, use a 3.0 V to 5.5 V transceiver supply, and support a separate 1.62 V to 5.5 V logic supply. Its bus-pin ESD ratings and hot-swap-oriented power behavior make it particularly suitable for industrial equipment connected to external cabling. The ADM3063EBRZ-R7 and ADM3063EARZ-R7 are appropriate when reel orientation or shipment format matters; both preserve the same SOIC-14 electrical family. Consider ADM3064EARZ, ADM3065EARZ, or ADM3066EARZ only after confirming their exact pin functions, channel arrangement, speed, protection, and supply requirements against the manufacturer datasheet. Do not use a half-duplex transceiver as a board-level substitute without changing the bus wiring, termination, and direction-control circuitry.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADM3063EBRZ-R7 ADM3063EARZ-R7 ADM3064EARZ ADM3065EARZ ADM3066EARZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14
Product Type Full-duplex RS-485 transceiver Full-duplex RS-485 transceiver Full-duplex RS-485 transceiver ADM3064E family RS-485 transceiver ADM3065E family RS-485 transceiver ADM3066E family RS-485 transceiver
VCC Operating Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V family range 3.0 V to 5.5 V family range 3.0 V to 5.5 V family range

মূল পার্থক্যসমূহ

  • Independent low-voltage logic interface (বনামADM3063EBRZ-R7)
  • Full-duplex operation at 500 kbps (বনামADM3064EARZ)
  • Enhanced bus-pin ESD protection (বনামADM3065EARZ)
  • Glitch-free power-state transitions (বনামADM3066EARZ)

ডিজাইন নোট

Place the VCC and VIO decoupling capacitors immediately adjacent to their respective supply pins, with the shortest possible ground-return paths. Route the RS-485 driver and receiver connections as differential pairs, maintaining continuous reference to the board ground plane where the system design permits it. Keep the interface away from high-current switching nodes and use a solid, low-impedance ground strategy to reduce common-mode conversion and susceptibility to industrial noise.

Do not substitute a half-duplex transceiver without redesigning the bus topology. A full-duplex ADM3063E normally uses separate driver and receiver differential pairs, unlike a half-duplex interface that multiplexes one pair and requires direction control. Also confirm that the connector, cable, grounding, external protection, and termination network are compatible with the transceiver's common-mode limits; successful communication at short distances does not guarantee performance on a long industrial bus.

Treat the two conductors of each differential pair as a controlled-impedance structure and avoid routing over splits in the ground plane. Avoid placing test-point stubs that create visible discontinuities on high-speed RS-485 edges. Because the bus can carry fast 500 kbps signaling with fast rise times, minimize connector branches and unnecessary trace length, and verify the completed board for radiated emissions and ESD susceptibility under its intended enclosure and cable configuration.

Observe the distinct VCC and VIO supply ranges: VCC operates from 3.0 V to 5.5 V, while VIO supports 1.62 V to 5.5 V. Do not assume that both pins may use any supply within the VCC range. Confirm the logic thresholds against the connected controller, maintain the required bypass capacitance, and use the manufacturer's power-up and power-down recommendations when the equipment can be connected to a live bus.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component is identified as RoHS3 compliant and REACH unaffected, with MSL 1. No manufacturer statement for AEC-Q100 qualification, lead-free status, halogen-free status, or conflict-minerals compliance was available for the exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADM3063EARZ datasheet ADM3063EARZ pinout ADM3063EARZ datasheet pdf ADM3063EARZ equivalent ADM3063EARZ replacement ADM3063EARZ cross reference ADM3063EARZ footprint ADM3063EARZ application circuit ADM3063EARZ vs ADM3063EBRZ-R7 Analog Devices ADM3063EARZ ADM3063EARZ 500kbps RS-485 ADM3063EARZ SOIC-14 pinout ADM3063EARZ ESD protection ADM3063EARZ industrial communication ADM3063EARZ price and stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices ADM3063EARZ ADM3063EBRZ-R7 ADM3063EARZ-R7 ADM3064EARZ ADM3065EARZ ADM3066EARZ RS-485 TIA/EIA RS-485 full-duplex transceiver communication interface IC industrial communication differential line driver differential receiver ESD protection IEC 61000-4-2 hot-swap SOIC-14 SOIC family surface mount VIO logic supply common-mode voltage RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন