ADS8345EB - 16-Bit 100-kSPS 8-Channel ADC | Texas Instruments
MPN: ADS8345EB ✓ সক্রিয়ADS8345EB সারাংশ
An ADC converts an analog voltage into a numerical representation for measurement, control, logging, or signal processing. The ADS8345EB belongs to the SAR ADC hierarchy, where an internal sample-and-hold circuit and successive-approximation converter produce one digital code per conversion. Its integrated eight-channel multiplexer reduces external analog-switch complexity, while the synchronous serial interface supports controlled data transfer to a microcontroller or digital signal processor.
Key features include 16-bit resolution, a maximum conversion rate of 100 kSPS, and 85 dB SINAD according to the Texas Instruments product page. The reference voltage can vary from 500 mV to half the supply voltage, with corresponding differential input range of ±VREF. The ADS8345 also includes a shutdown mode that reduces power dissipation when conversions are not required.
The converter uses a charge-balancing SAR architecture and an onboard multiplexer. According to the manufacturer datasheet, typical power dissipation is 8 mW at a 100-kSPS throughput rate with a 5 V supply. This low power supports portable and remotely powered measurement systems, although actual board-level consumption depends on the reference, digital interface activity, and external circuitry.
Typical applications include multichannel data acquisition, industrial process control, test and measurement equipment, portable data loggers, personal digital assistants, and battery-operated instrumentation. The serial interface can also provide economical isolation when the digital side is separated from the analog measurement front end. The device is offered in QSOP-20 and SSOP-20 packages and is specified over −40°C to +85°C.
Design the analog front end so that source impedance, settling time, and the acquisition period satisfy the ADC sampling requirements. Keep the reference network close to the REF pins, provide solid grounding, and place input and reference bypass capacitors near the device. Confirm signal polarity and channel selection against the pin-description table in the manufacturer datasheet before finalizing the PCB.
This product page combines the manufacturer specifications, package information, drop-in family relationships, and practical selection guidance into one engineering-oriented reference. It highlights where the ADS8345EB fits, how it differs from pin-compatible lower-resolution devices, and which circuit-level checks matter before deployment in precision data-acquisition systems.
এর জন্য ড্রপ-ইন বিকল্প ADS8345EB — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ADS8345EB (একই form factor এবং footprint) — পার্থক্য রয়েছে Operating Temperature Range, Resolution, Typical Power Dissipation.
ADS8344EB
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ADS7844EB
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADS8345EB সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| রেজোলিউশন | 16 bit |
| Maximum Conversion Rate | 100 kSPS |
| Input Configuration | 8 single-ended or 4 differential channels |
| Input Architecture | Fully differential SAR ADC |
| Analog Input Type | Bipolar |
| Supply Voltage Range | 2.7 V to 5 V |
| Reference Voltage Range | 500 mV to VCC/2 |
| Differential Input Range | ±VREF |
| Signal-to-Noise Plus Distortion | 85 dB |
| Typical Power Dissipation | 8 mW at 100 kSPS and 5 V supply |
| Digital Interface | Synchronous serial interface |
| Shutdown Mode | Yes |
| অপারেটিং তাপমাত্রার পরিসর | -40°C to +85°C |
| Package Options | QSOP-20 and SSOP-20 |
| Target MPN Package | 20-pin SSOP |
| মাউন্টিং টাইপ | Surface mount |
ADS8345EB 20-pin ssop পিন কনফিগারেশন গাইড
ADS8345EB (20-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADS8345EB.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ADS8345EB এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Monitoring, Portable Data Logging, Test and Measurement Equipment, Remote Data Acquisition, Battery-Powered Instrumentation, Personal Digital Assistants and Embedded Sensors.
Industrial Process Monitoring
The ADS8345EB fits industrial process monitoring because it combines eight analog inputs with 16-bit resolution and a 100-kSPS maximum conversion rate. The integrated multiplexer allows a controller to scan multiple pressure, temperature, level, or position signals without requiring a separate analog switch for every channel. A 2.7 V to 5 V single supply simplifies low-voltage instrument design, while the adjustable 500 mV to VCC/2 reference permits the analog span to match the transducer and conditioning circuitry. The −40°C to +85°C device range supports many industrial environments. Engineers should still verify common-mode limits, input settling, isolation strategy, and EMC performance in the finished equipment.
সুপারিশকৃত
Portable Data Logging
The ADS8345EB supports portable data-logging systems that must acquire several low-bandwidth analog measurements while consuming little power. Its 8 mW typical dissipation at 100-kSPS and 5 V operation is useful when energy is limited, and the shutdown mode can reduce consumption during inactive intervals. Eight single-ended inputs or four differential inputs provide flexibility for sensor aggregation, while 16-bit codes preserve fine numerical detail for later analysis. The synchronous serial interface reduces wiring to a digital controller. For battery-operated equipment, optimize conversion rate, reference circuitry, and serial activity rather than assuming the headline power figure applies to every operating condition.
সুপারিশকৃত
Test and Measurement Equipment
The ADS8345EB is appropriate for bench instruments and portable measurement systems requiring multiple analog channels and relatively high numerical precision. Its 16-bit resolution, 100-kSPS throughput, and 85 dB SINAD specification provide a useful balance between resolution, speed, and power. The eight-channel multiplexer can consolidate several sensor front ends behind one converter, reducing board area and synchronization complexity. Adjusting VREF from 500 mV to VCC/2 lets the designer optimize the bipolar input range for the analog signal chain. The serial interface is suitable for connecting to a microcontroller or DSP while keeping the analog and digital routing areas well separated.
সুপারিশকৃত
Remote Data Acquisition
The ADS8345EB can be used at the remote end of a data-acquisition link because its synchronous serial interface supports economical isolation between analog measurement circuitry and a digital controller. The converter accepts multiple bipolar inputs while keeping the interface compact, making it suitable for distributed sensor nodes that transmit sampled measurements to a central processor. Its low typical power dissipation of 8 mW at 100-kSPS and 5 V is beneficial where power must travel over the isolation barrier. Isolation components and digital timing still require separate engineering, and the reference and input networks should remain on the analog side to prevent converter noise from crossing into the communication circuitry.
সুপারিশকৃত
Battery-Powered Instrumentation
The ADS8345EB fits battery-powered instrumentation because it combines a 2.7 V to 5 V single-supply operating range, low typical power dissipation, and a shutdown function. Eight single-ended inputs or four fully differential inputs can serve compact sensor packages, while 16-bit conversion data supports precise control, calibration, or logging functions. The synchronous serial interface consumes fewer signal lines than a parallel ADC, helping conserve connector pins and PCB area. Power budgeting should include reference current, digital-interface transitions, regulator efficiency, and any external signal-conditioning components. Activating shutdown during idle periods can further reduce system energy use when continuous conversion is unnecessary.
সুপারিশকৃত
Personal Digital Assistants and Embedded Sensors
The ADS8345EB can serve compact embedded products that combine touch, position, biomedical, or environmental sensing with a digital controller. The manufacturer identifies personal digital assistants and portable multichannel data loggers as typical ADS8345 applications. Eight single-ended channels reduce the need for multiple converters, while the 16-bit output captures small changes in sensor-derived voltages. The 2.7 V minimum supply supports integration with low-energy digital systems, and the synchronous serial interface provides a straightforward connection to a microcontroller. Layout must minimize coupling from switching nodes into the analog inputs and reference network, particularly when the sensor signal is small relative to the selected ±VREF range.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS8345EB — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADS8344EB | ADS7844EB |
|---|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 12 bit | 12 bit |
| Pin Compatibility | Reference device | Pin-for-pin compatible per Texas Instruments | Pin-for-pin compatible per Texas Instruments |
মূল পার্থক্যসমূহ
- Higher nominal conversion resolution (বনামADS8344EB)
- Higher nominal conversion resolution (বনামADS7844EB)
- Manufacturer-confirmed pin compatibility for PCB reuse (বনামADS8344EB)
ডিজাইন নোট
Route the ADS8345EB analog inputs as short, quiet traces and place their bypass or protection components close to the relevant pins. Keep the serial interface and any digital return paths away from the reference and analog-input nodes. The device supports eight single-ended or four differential channels, so use the manufacturer's pin-description table when assigning multiplexed inputs. A solid ground plane and careful partitioning between analog and digital circuitry help prevent switching activity from appearing as measurement error.
Budget the reference network as part of the converter's power consumption rather than treating supply current alone as the total load. The manufacturer reports 8 mW typical dissipation at 100-kSPS and a 5 V supply, but actual consumption depends on conversion activity and external circuitry. Keep bypass capacitors close to the supply and reference pins, use a low-noise reference source, and verify shutdown behavior against the end-product duty cycle before sizing a battery or regulator.
Do not select a pin-compatible replacement solely from package dimensions. Although Texas Instruments identifies the ADS8344 and ADS7844 as pin-for-pin compatible with the ADS8345, those 12-bit alternatives provide four fewer nominal resolution bits than the 16-bit ADS8345EB. Check resolution, input range, acquisition time, reference implementation, interface timing, and operating limits in every applicable datasheet. Preserve the original ADC's required measurement accuracy before releasing a substitute to production.
কমপ্লায়েন্স তথ্য
The verified manufacturer and distributor information does not provide explicit compliance statements for this ordering code.