Texas Instruments

ADS8345EB - 16-Bit 100-kSPS 8-Channel ADC | Texas Instruments

MPN: ADS8345EB ✓ Hoạt động
2.7 V to 5 V Vdss QSOP-20 and SSOP-20 Package
MOQ: 1 |

ADS8345EB Tóm tắt

Texas Instruments ADS8345EB is a 16-bit, 100-kSPS, eight-channel successive-approximation analog-to-digital converter with fully differential inputs and a synchronous serial interface, packaged in a 20-pin SSOP. It supports eight single-ended input channels or four differential input channels and operates from a single 2.7 V to 5 V supply.

An ADC converts an analog voltage into a numerical representation for measurement, control, logging, or signal processing. The ADS8345EB belongs to the SAR ADC hierarchy, where an internal sample-and-hold circuit and successive-approximation converter produce one digital code per conversion. Its integrated eight-channel multiplexer reduces external analog-switch complexity, while the synchronous serial interface supports controlled data transfer to a microcontroller or digital signal processor.

Key features include 16-bit resolution, a maximum conversion rate of 100 kSPS, and 85 dB SINAD according to the Texas Instruments product page. The reference voltage can vary from 500 mV to half the supply voltage, with corresponding differential input range of ±VREF. The ADS8345 also includes a shutdown mode that reduces power dissipation when conversions are not required.

The converter uses a charge-balancing SAR architecture and an onboard multiplexer. According to the manufacturer datasheet, typical power dissipation is 8 mW at a 100-kSPS throughput rate with a 5 V supply. This low power supports portable and remotely powered measurement systems, although actual board-level consumption depends on the reference, digital interface activity, and external circuitry.

Typical applications include multichannel data acquisition, industrial process control, test and measurement equipment, portable data loggers, personal digital assistants, and battery-operated instrumentation. The serial interface can also provide economical isolation when the digital side is separated from the analog measurement front end. The device is offered in QSOP-20 and SSOP-20 packages and is specified over −40°C to +85°C.

Design the analog front end so that source impedance, settling time, and the acquisition period satisfy the ADC sampling requirements. Keep the reference network close to the REF pins, provide solid grounding, and place input and reference bypass capacitors near the device. Confirm signal polarity and channel selection against the pin-description table in the manufacturer datasheet before finalizing the PCB.

This product page combines the manufacturer specifications, package information, drop-in family relationships, and practical selection guidance into one engineering-oriented reference. It highlights where the ADS8345EB fits, how it differs from pin-compatible lower-resolution devices, and which circuit-level checks matter before deployment in precision data-acquisition systems.

Bộ thay thế dễ dàng lắp đặt cho ADS8345EB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS8345EB (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Resolution, Typical Power Dissipation.

Texas Instruments
Operating Temperature Range: -40 °C to +85 °C
Resolution: 16 bits
Typical Power Dissipation: 8 mW at 5 V, 100 kSPS

ADS8344EB

✅ Drop-In
Texas Instruments
📦 20-pin SSOP
Successive-approximation ADC (SAR) · 16 bit · 8 channels · 100 kSPS · 8 single-ended or 4 differential inputs · Single-ended · Single supply · 10 mW at 5 V supply and 100 kSPS throughput

Liên hệ để biết giá

Xem tài liệu →

ADS7844EB

✅ Drop-In
📦 20-pin SSOP
Nominal resolution is 12 bit versus 16 bit, a 25% reduction, while Texas Instruments identifies pin-for-pin compatibility.

📋 Tham chiếu thay thế (không có trong danh mục)

ADS8345EB Tỷ lệ tối đa & tính chất điện

Độ phân giải 16 bit
Maximum Conversion Rate 100 kSPS
Input Configuration 8 single-ended or 4 differential channels
Input Architecture Fully differential SAR ADC
Analog Input Type Bipolar
Supply Voltage Range 2.7 V to 5 V
Reference Voltage Range 500 mV to VCC/2
Differential Input Range ±VREF
Signal-to-Noise Plus Distortion 85 dB
Typical Power Dissipation 8 mW at 100 kSPS and 5 V supply
Digital Interface Synchronous serial interface
Shutdown Mode Yes
Khoảng nhiệt độ hoạt động -40°C to +85°C
Package Options QSOP-20 and SSOP-20
Target MPN Package 20-pin SSOP
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân ADS8345EB 20-pin ssop

Cấu hình chân cho ADS8345EB (20-pin ssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 20-pin ssop cho ADS8345EB

Không có dữ liệu chân cụ thể sẵn có cho ADS8345EB.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADS8345EB phù hợp cho 6 Áp dụngs: Industrial Process Monitoring, Portable Data Logging, Test and Measurement Equipment, Remote Data Acquisition, Battery-Powered Instrumentation, Personal Digital Assistants and Embedded Sensors.

🏭

Industrial Process Monitoring

The ADS8345EB fits industrial process monitoring because it combines eight analog inputs with 16-bit resolution and a 100-kSPS maximum conversion rate. The integrated multiplexer allows a controller to scan multiple pressure, temperature, level, or position signals without requiring a separate analog switch for every channel. A 2.7 V to 5 V single supply simplifies low-voltage instrument design, while the adjustable 500 mV to VCC/2 reference permits the analog span to match the transducer and conditioning circuitry. The −40°C to +85°C device range supports many industrial environments. Engineers should still verify common-mode limits, input settling, isolation strategy, and EMC performance in the finished equipment.

📱

Portable Data Logging

The ADS8345EB supports portable data-logging systems that must acquire several low-bandwidth analog measurements while consuming little power. Its 8 mW typical dissipation at 100-kSPS and 5 V operation is useful when energy is limited, and the shutdown mode can reduce consumption during inactive intervals. Eight single-ended inputs or four differential inputs provide flexibility for sensor aggregation, while 16-bit codes preserve fine numerical detail for later analysis. The synchronous serial interface reduces wiring to a digital controller. For battery-operated equipment, optimize conversion rate, reference circuitry, and serial activity rather than assuming the headline power figure applies to every operating condition.

🖥️

Test and Measurement Equipment

The ADS8345EB is appropriate for bench instruments and portable measurement systems requiring multiple analog channels and relatively high numerical precision. Its 16-bit resolution, 100-kSPS throughput, and 85 dB SINAD specification provide a useful balance between resolution, speed, and power. The eight-channel multiplexer can consolidate several sensor front ends behind one converter, reducing board area and synchronization complexity. Adjusting VREF from 500 mV to VCC/2 lets the designer optimize the bipolar input range for the analog signal chain. The serial interface is suitable for connecting to a microcontroller or DSP while keeping the analog and digital routing areas well separated.

🌐

Remote Data Acquisition

The ADS8345EB can be used at the remote end of a data-acquisition link because its synchronous serial interface supports economical isolation between analog measurement circuitry and a digital controller. The converter accepts multiple bipolar inputs while keeping the interface compact, making it suitable for distributed sensor nodes that transmit sampled measurements to a central processor. Its low typical power dissipation of 8 mW at 100-kSPS and 5 V is beneficial where power must travel over the isolation barrier. Isolation components and digital timing still require separate engineering, and the reference and input networks should remain on the analog side to prevent converter noise from crossing into the communication circuitry.

⚡

Battery-Powered Instrumentation

The ADS8345EB fits battery-powered instrumentation because it combines a 2.7 V to 5 V single-supply operating range, low typical power dissipation, and a shutdown function. Eight single-ended inputs or four fully differential inputs can serve compact sensor packages, while 16-bit conversion data supports precise control, calibration, or logging functions. The synchronous serial interface consumes fewer signal lines than a parallel ADC, helping conserve connector pins and PCB area. Power budgeting should include reference current, digital-interface transitions, regulator efficiency, and any external signal-conditioning components. Activating shutdown during idle periods can further reduce system energy use when continuous conversion is unnecessary.

🧩

Personal Digital Assistants and Embedded Sensors

The ADS8345EB can serve compact embedded products that combine touch, position, biomedical, or environmental sensing with a digital controller. The manufacturer identifies personal digital assistants and portable multichannel data loggers as typical ADS8345 applications. Eight single-ended channels reduce the need for multiple converters, while the 16-bit output captures small changes in sensor-derived voltages. The 2.7 V minimum supply supports integration with low-energy digital systems, and the synchronous serial interface provides a straightforward connection to a microcontroller. Layout must minimize coupling from switching nodes into the analog inputs and reference network, particularly when the sensor signal is small relative to the selected ±VREF range.

Tóm tắt các sản phẩm được đề xuất

ADS8344EB Texas Instruments Được sử dụng trong: Industrial Process Monitoring, Portable Data Logging, Remote Data Acquisition, Personal Digital Assistants and Embedded Sensors ADS7844EB Manufacturer-identified pin-compatible ADC family Được sử dụng trong: Test and Measurement Equipment, Battery-Powered Instrumentation
What are the key specifications of ADS8345EB that engineers should know?
The ADS8345EB is a 16-bit, 100-kSPS, eight-channel SAR ADC with fully differential inputs, a 2.7 V to 5 V supply, and a 20-pin SSOP package. According to the Texas Instruments product page, it supports eight single-ended or four differential channels, provides 85 dB SINAD, and consumes 8 mW typically at 100 kSPS with a 5 V supply. Its reference voltage is adjustable from 500 mV to VCC/2, allowing the differential input range to scale with the reference.
Where can I download the ADS8345EB datasheet PDF?
The official ADS8345 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads8345.pdf. The document contains the electrical characteristics, timing information, pin descriptions, application information, and package drawings for the ADS8345 family. Use the manufacturer PDF rather than a third-party mirror when assigning pins, calculating acquisition time, checking absolute maximum ratings, or planning the PCB footprint.
Where can I find the ADS8345EB pinout and SSOP-20 footprint?
Use the pin-description table and package drawing in the Texas Instruments ADS8345 datasheet to locate the ADS8345EB pins and SSOP-20 footprint. The verified product information confirms a 20-pin SSOP package, but it does not reproduce the individual pin assignments. The package drawing should be checked against the PCB library before routing analog inputs, serial-interface signals, reference connections, supply rails, and exposed functional pins.
Can ADS8344EB replace ADS8345EB without changing the PCB?
The Texas Instruments ADS8345 product page identifies the ADS8345 as pin-for-pin compatible with the ADS7844 and ADS8344, so ADS8344EB is a board-level drop-in candidate when the ADS8345EB uses the corresponding 20-pin SSOP footprint. The principal trade-off is resolution: ADS8344 provides 12-bit conversion data, 4 bits below the ADS8345EB's 16-bit result. Confirm timing, reference requirements, and acquisition behavior against both datasheets before production release.
What can replace ADS8345EB in a pin-compatible design?
ADS8344EB is the closest pin-compatible substitute identified for the ADS8345EB because the Texas Instruments product page explicitly states pin-for-pin compatibility with the ADS8344 and both devices use the corresponding 20-pin SSOP configuration. It reduces conversion resolution from 16 bits to 12 bits, a 25% reduction in nominal resolution, so it is suitable only when the system can tolerate coarser quantization. Verify the exact operating conditions before substitution.
What is the best Texas Instruments equivalent for ADS8345EB?
ADS8344EB is the best verified same-manufacturer equivalent for a pin-compatible ADS8345EB design because Texas Instruments explicitly identifies the ADS8344 as pin-for-pin compatible. The ADS8344EB trades 4 bits of resolution for the same physical connection arrangement. ADS7844EB is another lower-resolution pin-compatible family member identified by the manufacturer, but it also provides 12-bit results. Neither substitute should be selected without checking the complete timing and analog specifications.
Is ADS8345EB suitable for industrial process control?
The ADS8345EB is suitable for many industrial process-control measurement systems because it combines eight inputs, 16-bit resolution, 100-kSPS throughput, and a 2.7 V to 5 V single supply. Its operating range of −40°C to +85°C supports many industrial environments. Industrial suitability still depends on the complete system specification, including input bandwidth, common-mode voltage, isolation, EMC design, and whether the application requires a particular qualification category.
How does the ADS8345EB compare with the ADS7844EB?
The ADS8345EB provides 16-bit resolution at up to 100 kSPS, while the manufacturer identifies the ADS7844 as a 12-bit pin-for-pin-compatible family member. The ADS8345 therefore improves nominal resolution by 4 bits, or 33.3% relative to 12-bit data, while retaining the same broad conversion-rate and interface class. The trade-off is increased data width and potentially greater power and processing requirements in the connected controller.
When should I choose ADS8345EB instead of ADS8344EB?
Choose the ADS8345EB when the measured signal requires 16-bit resolution, such as precision process monitoring, instrumentation, or high-resolution logging. Choose ADS8344EB only when the system can operate with 12-bit results and the pin-compatible connection can preserve the required acquisition, reference, and timing behavior. Because nominal resolution differs by 4 bits, replacing the ADS8345EB with the ADS8344EB should be treated as a measured accuracy change rather than a transparent procurement substitution.
What are the ADS8345EB input voltage and reference limits?
The ADS8345EB operates from a single supply between 2.7 V and 5 V, while its reference voltage can range from 500 mV to VCC/2. According to the Texas Instruments part details, the corresponding differential input voltage range is ±VREF. The reference setting therefore determines the converter's usable bipolar input span. Keep the selected VREF within the datasheet limits and ensure common-mode and absolute input limits remain satisfied under every operating condition.
How much power does ADS8345EB consume?
The Texas Instruments part-details page states that typical power dissipation is 8 mW at a 100-kSPS throughput rate with a 5 V supply. The ADS8345 also includes a shutdown mode that reduces power dissipation when conversions are not needed. Actual consumption can vary with reference voltage, conversion rate, digital-interface activity, and external load conditions, so use the datasheet test conditions when comparing operating modes and designing battery-powered equipment.
Where can I buy ADS8345EB online?
Use the Request a Quote form on this page to request ADS8345EB availability, current commercial terms, and a quotation. The product is offered in a 20-pin SSOP package, and the manufacturer identifies the ADS8345 family as active. Because inventory and commercial terms can change, request a written quotation that identifies the exact ADS8345EB ordering code, quantity, delivery packaging, and required lead time before releasing the purchase order.
What is the price of ADS8345EB?
Use the Request a Quote form on this page for the current ADS8345EB quotation. The structured offer is calculated from the selected quantity and purchasing channel, and no static price should be copied into a design or sourcing record. For a complete commercial request, specify reel or tube quantity, target delivery location, required date, and whether any traceability or inspection documentation is needed.
What is the lead time and stock status for ADS8345EB?
Submit the ADS8345EB quantity and required delivery date through the Request a Quote form on this page to confirm current stock and lead time. The manufacturer lists the ADS8345 family as an active product, but live inventory and scheduling are not represented as fixed values on this page. Asking for a dated confirmation also helps identify whether the requested order can use standard delivery packaging or requires a manufacturer lead-time allocation.
Is ADS8345EB in stock?
Current ADS8345EB stock should be confirmed through the Request a Quote form on this page. The manufacturer identifies the ADS8345 family as active, but stock quantity varies by order quantity, delivery packaging, and regional inventory. Request a written stock confirmation that names ADS8345EB and the required reel or tube configuration, especially when the system schedule cannot tolerate an open-ended manufacturing lead time.

Dữ liệu tham khảo kỹ thuật cho ADS8345EB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADS8345EB when a design requires 16-bit quantization, eight single-ended or four differential inputs, and conversion rates up to 100 kSPS within a 20-pin SSOP footprint. It is particularly suitable for precision industrial monitoring, portable logging, and test equipment where the additional four resolution bits relative to a 12-bit converter affect measurement quality. Select ADS8344EB when the ADS8345 product page's pin-for-pin compatibility applies and 12-bit results are sufficient; its 4-bit lower resolution can reduce usable signal detail. Select ADS7844EB for a similar pin-compatible, lower-resolution alternative after checking the complete device specifications. Neither lower-resolution part should replace the ADS8345EB in a system that depends on 16-bit accuracy. For all three devices, verify package drawings, reference requirements, acquisition timing, and operating conditions before approving a substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADS8344EB ADS7844EB
Package 20-pin SSOP 20-pin SSOP 20-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 16 bit 12 bit 12 bit
Pin Compatibility Reference device Pin-for-pin compatible per Texas Instruments Pin-for-pin compatible per Texas Instruments

Bảo phân biệt quan trọng

  • Higher nominal conversion resolution (vsADS8344EB)
  • Higher nominal conversion resolution (vsADS7844EB)
  • Manufacturer-confirmed pin compatibility for PCB reuse (vsADS8344EB)

Ghi chú thiết kế

Route the ADS8345EB analog inputs as short, quiet traces and place their bypass or protection components close to the relevant pins. Keep the serial interface and any digital return paths away from the reference and analog-input nodes. The device supports eight single-ended or four differential channels, so use the manufacturer's pin-description table when assigning multiplexed inputs. A solid ground plane and careful partitioning between analog and digital circuitry help prevent switching activity from appearing as measurement error.

Budget the reference network as part of the converter's power consumption rather than treating supply current alone as the total load. The manufacturer reports 8 mW typical dissipation at 100-kSPS and a 5 V supply, but actual consumption depends on conversion activity and external circuitry. Keep bypass capacitors close to the supply and reference pins, use a low-noise reference source, and verify shutdown behavior against the end-product duty cycle before sizing a battery or regulator.

Do not select a pin-compatible replacement solely from package dimensions. Although Texas Instruments identifies the ADS8344 and ADS7844 as pin-for-pin compatible with the ADS8345, those 12-bit alternatives provide four fewer nominal resolution bits than the 16-bit ADS8345EB. Check resolution, input range, acquisition time, reference implementation, interface timing, and operating limits in every applicable datasheet. Preserve the original ADC's required measurement accuracy before releasing a substitute to production.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The verified manufacturer and distributor information does not provide explicit compliance statements for this ordering code.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADS8345EB datasheet ADS8345EB pinout ADS8345EB datasheet pdf ADS8345EB specifications ADS8345EB SSOP-20 footprint ADS8345EB 16 bit ADC ADS8345EB 100 kSPS ADS8345EB application circuit ADS8345EB equivalent ADS8345EB replacement ADS8345EB cross reference ADS8345EB vs ADS8344EB Texas Instruments ADS8345EB ADS8345EB price ADS8345EB buy

Các bộ phận và thuật ngữ liên quan

Texas Instruments ADS8345EB ADS8344EB ADS7844EB analog-to-digital converter ADC successive-approximation ADC SAR ADC sample-and-hold circuit multiplexer fully differential input synchronous serial interface 16-bit resolution 100-kSPS conversion rate 85 dB SINAD 2.7 V to 5 V single supply reference voltage VREF 20-pin SSOP surface-mount package industrial process control data acquisition portable data logging test and measurement shutdown mode
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ