AK4420VT 24-Bit 192kHz Stereo DAC | Asahi Kasei
MPN: AK4420VT ✓ সক্রিয়AK4420VT সারাংশ
An audio DAC is the bridge between a digital audio source and an analog output stage. In the signal chain, digital audio data enters the converter, is reconstructed into analog voltage signals, and is then amplified or filtered for loudspeakers, headphones, line inputs, or recording equipment. The AK4420VT operates within the ADC/DAC portion of the broader semiconductor hierarchy, where its primary function is converting 24-bit I2S samples into a stereo analog signal suitable for downstream audio circuitry.
The headline capabilities of the AK4420VT are a 24-bit DAC resolution, operation up to 192 kHz, stereo output, I2S digital audio input, and a 2 Vrms output level. These parameters distinguish it from lower-resolution or lower-bandwidth converters intended for general-purpose or low-cost audio paths. The 192 kHz capability also allows the converter to handle high-rate material associated with studio-quality source material, archival playback, and high-resolution audio equipment when the rest of the signal chain supports those rates.
The AK4420VT is specifically identified as an audio DAC rather than a general-purpose codec. It therefore addresses the conversion stage between a digital audio interface and analog circuitry, without implying that it includes analog-to-digital conversion, microphone preamplification, headphone amplification, or a complete USB interface. System partitioning should preserve those functional boundaries: the AK4420VT can receive digital samples from a USB controller, audio processor, or digital interface, while separate analog stages determine the final output level and load capability.
Typical applications include high-resolution USB audio interfaces, digital audio player boards, compact consumer audio products, line-level stereo conversion, and embedded playback systems. The 16-TSSOP package supports dense surface-mount construction, although analog layout remains critical because the DAC output and digital clock and data connections can affect signal integrity. The manufacturer datasheet should be used to assign every pin and to select the external clock, digital-interface, power, and output-network requirements for the final design.
When designing around the AK4420VT, begin with the complete system signal path rather than the converter in isolation. Confirm that the upstream source supports the intended bit depth and sample rate, that the digital interface format and clocking agree with the device configuration, and that the downstream amplifier can accept the resulting analog output. The principal trade-off is that a compact TSSOP device does not itself provide headphone or speaker drive capability, so a separate output amplifier may be required.
This product data combines the exact manufacturer-related descriptions, interface resolution, maximum sampling rate, output amplitude, and package information with practical selection and integration guidance. It is intended to help engineers identify the correct converter, understand its functional boundaries, and plan a low-noise audio implementation before consulting the full manufacturer datasheet for application-specific details.
এর জন্য ড্রপ-ইন বিকল্প AK4420VT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনAK4420VT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Stereo audio digital-to-analog converter (DAC) |
| DAC Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Channel Configuration | 2-channel stereo |
| Analog Output Level | 2 Vrms |
| প্যাকেজ | 16-pin TSSOP |
| মাউন্টিং টাইপ | Surface mount |
| Digital Input Format | I2S |
| Supported Sample Rates | Up to 192 kHz |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| Automotive Qualification | not_applicable |
AK4420VT 16-pin tssop পিন কনফিগারেশন গাইড
AK4420VT (16-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK4420VT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AK4420VT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Resolution USB Audio Interface, 192 kHz High-Resolution Player, Compact Digital Audio Playback Board, Stereo Line-Level Audio Conversion, Consumer Audio Equipment, Digital Recording and Monitoring Path.
High-Resolution USB Audio Interface
The AK4420VT fits the stereo DAC stage of a high-resolution USB audio interface because it accepts 24-bit I2S data and supports sampling rates up to 192 kHz. A USB controller can deliver the digital stream and master clock, while the converter produces a 2 Vrms stereo analog output for the interface's line or headphone stage. This partitioning preserves USB protocol handling and analog amplification as separate tasks. Designers should confirm the controller's I2S timing, clock ratio, and supported rate at the selected sample frequency. The AK4420VT does not include a USB controller or headphone amplifier, so those functions require dedicated circuitry and careful analog signal-path design.
সুপারিশকৃত
192 kHz High-Resolution Player
The AK4420VT is appropriate for a 192 kHz high-resolution player when the source supplies a compatible 24-bit I2S stream. Its maximum 192 kHz rate allows high-rate PCM data to be converted without reducing the source sampling frequency, while the 2 Vrms output provides a defined line-level target for the following amplifier or filter network. The complete player must still support the operating mode, clocking, and supply requirements specified by the manufacturer. For compact designs, the 16-TSSOP package helps minimize board area, although analog output routing and digital clock isolation remain essential.
সুপারিশকৃত
Compact Digital Audio Playback Board
The AK4420VT can serve as the central stereo DAC on a compact playback board fed by an embedded processor or digital interface. Its 24-bit resolution, 192 kHz capability, and 2 Vrms output support a high-quality line-level conversion stage within a small system. The device's 16-pin TSSOP package supports standard surface-mount assembly, but board-area savings should not compromise ground partitioning, clock routing, or output filtering. A separate headphone amplifier may be needed for low-impedance loads. The final design should follow the manufacturer datasheet for pin assignment, decoupling, supported digital modes, and output-network requirements.
সুপারিশকৃত
Stereo Line-Level Audio Conversion
The AK4420VT is suited to stereo line-level conversion because it produces a 2 Vrms output from a digital I2S source. It can be placed between an audio processor and a balanced or unbalanced line-output stage, depending on the system architecture and the device's specified output configuration. This arrangement is useful when a digital subsystem needs a clean conversion boundary before analog filtering, attenuation, or amplification. Engineering review should verify output topology, allowable load, settling behavior, and bypass requirements from the datasheet. The converter does not itself provide relay switching, gain control, or balanced output amplification.
সুপারিশকৃত
Consumer Audio Equipment
The AK4420VT can serve as the high-resolution stereo conversion element in consumer audio equipment driven by a digital media processor. Its 24-bit I2S interface and 192 kHz rate support high-resolution playback where the host and storage path support those data rates, while its compact 16-TSSOP package simplifies board integration. A typical design places the DAC near the line-output amplifier and analog output network to minimize sensitive routing. Product engineers should account for startup, power-supply cleanliness, ground returns, and EMI containment. The AK4420VT performs conversion only; volume control, loudspeaker drive, and user-interface functions belong elsewhere in the system.
সুপারিশকৃত
Digital Recording and Monitoring Path
The AK4420VT can support a digital recording or monitoring path when playback-side conversion is required for reference listening or analog capture. A digital audio processor feeds 24-bit I2S samples up to 192 kHz to the converter, and the 2 Vrms stereo output provides the signal for a line monitor, calibrated monitoring amplifier, or subsequent recording stage. This use requires the converter and destination to share the correct sample rate and clock relationship. Engineers must also evaluate grounding and isolation to prevent output converter activity from contaminating sensitive measurement channels. The device does not replace a dedicated ADC for analog recording.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK4420VT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 16-TSSOP |
| Product Type | Stereo audio DAC |
| DAC Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Interface | I2S |
| Channel Configuration | 2-channel stereo |
| Analog Output Level | 2 Vrms |
| Integrated Headphone Amplifier | No |
ডিজাইন নোট
Place the AK4420VT close to the digital audio source and the first analog output stage so that the sensitive conversion path remains short. Route I2S data and clock signals as controlled-impedance digital nets, and keep analog outputs away from clocks, switching nodes, and inductors. Use a continuous ground reference, minimize loop area, and establish clear digital, analog, and power-supply return paths before assigning the remaining pins from the manufacturer pin-description table.
Design the analog and digital supplies around the manufacturer's voltage, current, sequencing, and decoupling recommendations. Place the required input capacitors and bypass capacitors at the associated device pins, with very short ground returns. Do not infer supply limits from the 24-bit interface or 192 kHz sample rate, because those specifications describe signal resolution and bandwidth rather than the allowed power rails. Verify startup behavior and any analog-output state during initialization before enabling downstream amplifiers.
Treat the I2S data, bit clock, and master-clock connections as a synchronous digital interface and follow the manufacturer timing and clocking configuration. Check setup and hold requirements, output levels, and allowable clock ratios for the selected operating mode. Where the upstream controller and DAC sit on different boards, use a properly terminated or appropriately buffered digital connection rather than relying on a long point-to-point route.
Do not substitute a similarly named AKM DAC without checking the exact package, pinout, clock mode, supply arrangement, and output topology. AK4420ET and AK4426VT appear in related-device comparisons, but the available search results do not establish that either is a 16-TSSOP pin-compatible replacement for AK4420VT. Also remember that a 2 Vrms DAC output does not guarantee safe direct connection to every headphone or speaker load; verify impedance and use a suitable output amplifier when required.
কমপ্লায়েন্স তথ্য
The product descriptions do not state the environmental, material, or automotive-compliance status of the exact AK4420VT. Request current manufacturer declarations before release to production.