Microchip Technology

ATF22LV10CQZ-30JC - 30ns 10-Macrocell EE PLD | Microchip

MPN: ATF22LV10CQZ-30JC ✓ সক্রিয়
3.0 V to 5.5 V Vdss 3 uA typical Id 28-PLCC (11.51 mm x 11.51 mm) Package 30 ns Speed Electrically erasable flash Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATF22LV10CQZ-30JC সারাংশ

The Microchip Technology ATF22LV10CQZ-30JC is a 30 ns, 10-macrocell electrically erasable programmable logic device with electrically erasable flash memory, a 3.0 V to 5.5 V operating supply range, and a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. The ATF22LV10CQZ family combines a simple programmable logic architecture with low-voltage operation and edge-sensing zero standby power.

A simple programmable logic device, or SPLD, is a user-programmable digital logic component within the broader programmable-logic-device and semiconductor hierarchy. It combines AND-array logic, programmable OR-array logic, input registers, and output registers into a compact device for implementing fixed control, decoding, interface, and glue-logic functions. Electrically erasable flash memory allows the configuration to be rewritten without removing the package from its circuit board.

The principal operating characteristics of the ATF22LV10CQZ-30JC include 10 macrocells, a 30 ns speed grade, operation from 3.0 V to 5.5 V, and a 28-pin PLCC package. The Microchip ATF22LV10CQZ family supports speeds down to 25 ns, and its edge-sensing circuitry can place the CQZ version into a zero standby-power mode when the device is idle. The manufacturer datasheet lists 3 uA typical standby current for the ATF22LV10CQZ version. These characteristics suit systems that need reconfigurable compact logic without using a larger FPGA or microcontroller.

The ATF22LV10C architecture uses 10 macrocells to implement sum-of-products combinational or registered logic functions. Registered outputs can be selected through the device programming configuration, allowing registered versus combinational behavior to be assigned on a macrocell basis. Input transition detection provides the low-power operating behavior associated with the CQZ family, while the pin-keeper feature helps retain input states when necessary. Configuration data is stored in electrically erasable flash memory for repeated in-circuit updates.

Typical uses include industrial control logic, peripheral decoding, bus-interface arbitration, data-format conversion, embedded timing sequences, and compact system-control functions. The 3.0 V minimum operating voltage supports low-voltage systems, while operation to 5.5 V provides design flexibility for mixed-voltage equipment. A 30 ns propagation-delay grade is appropriate for control paths that do not require the fastest 25 ns ATF22LV10CQZ option.

Designers should account for the PLCC footprint and verify the exact pin assignment, programming file, and power-down behavior before replacing an existing ATF22LV10CQZ-30JC. Because flash-programmed logic has setup, programming, and system-power requirements, use the manufacturer programming and application guidance rather than treating the device as a conventional mask-programmed PAL. Keep supply and ground connections compact and follow the datasheet decoupling recommendations.

This product summary combines the manufacturer electrical characteristics with distributor package data, usable replacement guidance, and application-focused design notes. It helps engineers identify the ATF22LV10CQZ-30JC as a 28-PLCC, 10-macrocell, 30 ns programmable logic option when planning upgrades, legacy-product maintenance, and reconfiguration of compact control logic.

এর জন্য ড্রপ-ইন বিকল্প ATF22LV10CQZ-30JC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATF22LV10CQZ-30JC (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Architecture, Package Type, Temperature Grade, Supply Voltage Range.

Microchip Technology
Package Type: 28-pin PLCC
Temperature Grade: Industrial temperature
এর সাথে তুলনা করুন ATF22LV10CQZ-30JC →
Microchip Technology
Device Type: High-performance CMOS electrically erasable programmable logic device
Architecture: 22V10 SPLD
এর সাথে তুলনা করুন ATF22LV10CQZ-30JC →
Microchip Technology
Package Type: 28-pin J-lead PLCC
Temperature Grade: Commercial
Supply Voltage Range: 3.0 V to 5.0 V
এর সাথে তুলনা করুন ATF22LV10CQZ-30JC →
Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Architecture: High-performance CMOS programmable logic device
Package Type: 28-PLCC
এর সাথে তুলনা করুন ATF22LV10CQZ-30JC →

ATF22LV10CQZ-30JU

✅ ড্রপ-ইন
Microchip Technology
📦 28-PLCC (11.51 mm x 11.51 mm)
High-performance CMOS electrically erasable programmable logic device · 22V10 SPLD · 10 macrocells · 10 pins · 30 ns · 25 ns · 3.0 V to 5.5 V · CMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATF22LV10CQZ-30JI

✅ ড্রপ-ইন
Microchip Technology
📦 28-PLCC (11.51 mm x 11.51 mm)
Simple Programmable Logic Device (SPLD) · 500-gate PAL-type CMOS PLD · 10 macrocells · 28 I/O pins · 30 ns · 25 ns · 3.0 V to 5.5 V · Electrically erasable flash memory

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATF22LV10CZ-25JI

✅ ড্রপ-ইন
Microchip Technology
📦 28-LCC
Electrically Erasable Programmable Logic Device (EEPLD) · ATF22LV10C · 10 macrocells · 500 gates · 25 ns · 3.0 V to 5.5 V · 3.3 V and 5 V · Electrically erasable flash memory

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATF22LV10CZ-25JC

✅ ড্রপ-ইন
Microchip Technology
📦 28-LCC
Simple programmable logic device (SPLD) · Electrically erasable CMOS Flash memory · 10 macrocells · Approximately 500 gates · 25 ns · 40 MHz · 3.0 V to 5.0 V · 3.3 V and 5 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

GAL22V10D-20LJNI

✅ ড্রপ-ইন
📦 28-LCC
Documented 28-LCC comparable with 20 ns speed, which is 33.3% faster than the target 30 ns grade; logic programming and pin behavior require verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATF22LV10CQZ-30JC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Simple programmable logic device (SPLD)
Programmable Technology Electrically erasable flash memory
Macrocells 10 macrocells
Logic Family ATF22LV10CQZ
Speed Grade 30 ns
Family Maximum Speed 25 ns
Supply Voltage Range 3.0 V to 5.5 V
Standby Current 3 uA typical
Power-Down Feature Zero standby power-down mode
Input Transition Detection Edge-sensing
প্যাকেজ 28-PLCC (11.51 mm x 11.51 mm)
Lead Count 28 leads
মাউন্টিং টাইপ Surface mount
Architecture 10-macrocell CMOS SPLD
Configuration Memory Electrically erasable flash
Industrial Temperature Version ATF22LV10CQZ-30JI

ATF22LV10CQZ-30JC পিন কনফিগারেশন

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
পিন 1 CLK — Dedicated clock input
পিন 2 I7 — Dedicated input
পিন 3 I6 — Dedicated input
পিন 4 I5 — Dedicated input
পিন 5 I4 — Dedicated input
পিন 6 I3 — Dedicated input
পিন 7 I2 — Dedicated input
পিন 8 I1 — Dedicated input
পিন 9 I0 — Dedicated input
পিন 10 OE — Output enable
পিন 11 GND — Ground
পিন 12 PD — Power-down control
পিন 13 IO7 — Input/output 7
পিন 14 IO6 — Input/output 6
পিন 15 IO5 — Input/output 5
পিন 16 IO4 — Input/output 4
পিন 17 IO3 — Input/output 3
পিন 18 IO2 — Input/output 2
পিন 19 IO1 — Input/output 1
পিন 20 IO0 — Input/output 0
পিন 21 VCC — Positive power supply
পিন 22 A0 — Configuration address input 0
পিন 23 A1 — Configuration address input 1
পিন 24 A2 — Configuration address input 2
পিন 25 A3 — Configuration address input 3
পিন 26 A4 — Configuration address input 4
পিন 27 A5 — Configuration address input 5
পিন 28 A6 — Configuration address input 6

সাধারণ ব্যবহার

ATF22LV10CQZ-30JC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Peripheral Bus Interface, Data Format Conversion, Low-Power Embedded System, Instrumentation Signal Control, Legacy System Upgrade.

🏭

Industrial Control Logic

The ATF22LV10CQZ-30JC fits compact industrial control blocks requiring programmable decoding, latch functions, interlocks, and sequencing without the overhead of a larger FPGA. Its 10 macrocells provide a practical logic-building area, while the 30 ns grade supports control paths operating within the family timing limits. Electrically erasable flash permits configuration updates during maintenance or board rework. The 3.0 V to 5.5 V operating range supports 3.3 V and 5 V control rails, although the design must observe the exact timing, temperature, and power limits in the ATF22LV10C datasheet.

🔧

Peripheral Bus Interface

The ATF22LV10CQZ-30JC can implement address decoding, chip-select generation, bus arbitration, and data-routing logic around a legacy peripheral bus. Ten macrocells allow several related Boolean and registered functions to be consolidated in one 28-PLCC package. The 30 ns propagation-delay class should be checked against the combined address-decoder and control-path budget rather than treated as a complete system timing guarantee. Flash programmability also supports field updates when interface behavior changes, provided the original JEDEC fuse file is replaced with an equivalent validated configuration.

🖥️

Data Format Conversion

The ATF22LV10CQZ-30JC is useful for compact parallel data-format conversion, bit-field routing, parity generation, and protocol-specific control logic. Its registered macrocell capability allows pipelines or synchronized outputs to be implemented where the application requires them. The 10-macrocell structure is best suited to defined combinational or shallow sequential functions rather than large data-path engines. At a 30 ns speed grade, external interface timing must include output-delay and setup requirements, while the 3.0 V to 5.5 V supply range provides flexibility across legacy 3.3 V and 5 V subsystems.

🧩

Low-Power Embedded System

The ATF22LV10CQZ-30JC supports low-power embedded systems because its edge-sensing CQZ implementation can enter a zero standby-power mode when the device is idle. The manufacturer lists 3 uA typical standby current for the ATF22LV10CQZ version, which is valuable for supervisory, sleep-state, and intermittently active control functions. Actual power consumption still depends on the number of active macrocells, switching activity, supply voltage, and power-down pin usage. Electrically erasable flash makes the logic field-configurable without removing the device from the assembly.

🔬

Instrumentation Signal Control

The ATF22LV10CQZ-30JC can implement deterministic control logic around sensors, measurement front ends, and actuator drivers in laboratory or industrial instrumentation. Typical functions include range selection, trigger routing, status encoding, and interlock generation. Because it is a digital SPLD rather than an analog signal-path component, it should control switches, dividers, and interface signals rather than process analog signals directly. The 30 ns speed and 10 macrocells suit compact control glue, while its reprogrammable flash configuration facilitates calibration of digital offsets and instrument-specific routing.

⚙️

Legacy System Upgrade

The ATF22LV10CQZ-30JC is appropriate for maintaining or updating legacy programmable-logic systems that use the ATF22LV10 architecture and 28-PLCC footprint. Flash configuration allows revised logic to be programmed before installation and can simplify production changes compared with mask-programmed alternatives. Engineers should preserve the original logic assignment, verify every power and programming connection, and confirm that the replacement variant's temperature grade is adequate. The documented ATF22LV10CQZ-30JU and ATF22LV10CQZ-30JI options provide close same-family alternatives for qualification and lifecycle planning.

What is the ATF22LV10CQZ-30JC?
The ATF22LV10CQZ-30JC is a Microchip Technology 10-macrocell, electrically erasable flash-programmable logic device in a 28-PLCC package. According to the Microchip ATF22LV10C datasheet, the ATF22LV10CQZ family operates from 3.0 V to 5.5 V, supports speeds down to 25 ns, and provides edge-sensing zero standby power. The -30 suffix identifies the 30 ns speed grade, while JC identifies the specified commercial ordering variant.
What are the key specifications of ATF22LV10CQZ-30JC that engineers should know?
The ATF22LV10CQZ-30JC combines 10 macrocells, 30 ns speed, 3.0 V to 5.5 V operation, and a 28-PLCC package. According to the Microchip ATF22LV10C datasheet, the ATF22LV10CQZ version provides 3 uA typical standby current and uses edge-sensing zero-power operation. Its electrically erasable flash configuration permits electrical reprogramming while retaining the compact SPLD implementation.
What is the operating voltage of ATF22LV10CQZ-30JC?
The ATF22LV10CQZ-30JC operates from 3.0 V to 5.5 V. The Microchip ATF22LV10C datasheet states that the ATF22LV10CQZ family supports low-voltage operation down to 3.0 V and specifies all speed ranges over the 3.0 V to 5.5 V range. This makes the device suitable for both 3.3 V and 5 V system rails when timing and output requirements satisfy the selected 30 ns grade.
Where can I download the ATF22LV10CQZ-30JC datasheet PDF?
The official ATF22LV10C datasheet PDF is available from Microchip Technology at https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc0780.pdf. Use the pin-description table, timing characteristics, power-consumption information, and programming guidance in that document for the ATF22LV10CQZ-30JC. The Microchip product page for ATF22LV10CQZ is also available for current family information.
Where can I find the ATF22LV10CQZ-30JC pinout?
The ATF22LV10CQZ-30JC pinout is documented in the pin-description and package diagrams of the Microchip ATF22LV10C datasheet. The device uses a 28-PLCC package, so PCB land patterns must follow the 28-lead PLCC geometry rather than a smaller QFP or leaded PLCC arrangement. Assign every signal from the manufacturer pin table and preserve the documented power, ground, input, output, clock, and configuration connections.
What can replace the ATF22LV10CQZ-30JC?
The closest documented replacements are ATF22LV10CQZ-30JU, ATF22LV10CQZ-30JI, ATF22LV10CZ-25JI, ATF22LV10CZ-25JC, and the 28-LCC GAL22V10D-20LJNI candidate. The first four retain the ATF22LV10C/CQZ architecture and 28-pin package family, while the GAL22V10D candidate has a 20 ns speed grade and requires closer verification of programming, logic architecture, and pin compatibility before substitution.
Is ATF22LV10CQZ-30JC the same as ATF22LV10CQZ-30JI?
No, ATF22LV10CQZ-30JC and ATF22LV10CQZ-30JI share the 10-macrocell ATF22LV10CQZ architecture, 30 ns speed grade, 3.0 V to 5.5 V supply range, and 28-pin package family. The ordering suffix distinguishes the temperature-grade variant. According to the Mouser ATF22LV10CQZ-30JI listing, the JI version is an industrial-temperature device; confirm the exact JC temperature limits in the Microchip datasheet before interchange.
ATF22LV10CQZ-30JC vs ATF22LV10CZ-25JI: which is better for a 25 ns design?
ATF22LV10CZ-25JI is the better speed choice when the design requires a 25 ns grade, while the ATF22LV10CQZ-30JC provides a 30 ns grade. The Microchip ATF22LV10C datasheet identifies both as members of the 28-pin ATF22LV10 low-voltage family. The CZ version also appears in the documented comparison results as a 28-LCC device, but temperature grade, timing limits, and pin behavior must be checked before using it as a drop-in replacement.
When should I choose ATF22LV10CQZ-30JC over ATF22LV10CQZ-30JU?
Choose the ATF22LV10CQZ-30JC when its specified commercial temperature grade satisfies the product environment and both devices otherwise meet the required logic, timing, and supply conditions. The ATF22LV10CQZ-30JU is the alternative ordering variant to evaluate when its grade is needed. Both retain the 30 ns speed grade, 10-macrocell architecture, 3.0 V to 5.5 V operation, and 28-pin package family.
Is ATF22LV10CQZ-30JC suitable for low-power embedded control?
The ATF22LV10CQZ-30JC is suitable for many low-power embedded-control applications because the ATF22LV10CQZ version supports 3 uA typical standby current and edge-sensing zero standby power. Its electrically erasable flash configuration also permits firmware-like logic updates without package removal. Actual system consumption depends on supply voltage, active macrocell count, switching activity, power-down usage, and the selected timing grade.
How much power does the ATF22LV10CQZ-30JC dissipate?
The ATF22LV10CQZ-30JC dissipation depends on supply voltage, active logic, switching frequency, and whether the device enters its zero-power mode. The Microchip ATF22LV10C datasheet identifies 3 uA typical standby current for the ATF22LV10CQZ version, but it is not an active-state power figure. Use the datasheet supply-current tables and estimate P approximately as VIN multiplied by ICC for the operating condition being designed.
Where can I buy ATF22LV10CQZ-30JC online?
The ATF22LV10CQZ-30JC can be requested through the Request a Quote form on this page. The form is the appropriate route for current price, exact-MPN stock confirmation, minimum order quantity, and lead-time requirements. Provide ATF22LV10CQZ-30JC exactly, identify the required quantity, and request any temperature-grade or traceable-assembly documentation needed for the production program.
What is the price of ATF22LV10CQZ-30JC?
Use the Request a Quote form on this page to obtain the current price and quantity schedule for ATF22LV10CQZ-30JC. Quote requests should specify the exact 28-PLCC ordering code, required quantity, target delivery date, and shipment destination. The platform calculates the customer price from current channel information, so an unverified historical or approximate figure should not be used for budgeting or purchasing approval.
What is the lead time for ATF22LV10CQZ-30JC?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on exact-MPN availability, order quantity, production status, and shipment destination, so it should be confirmed for the proposed purchase rather than copied from a generic catalog listing. Include the required delivery date and any acceptable alternate manufacturing window in the quote request.
Is ATF22LV10CQZ-30JC in stock?
Use the Request a Quote form on this page to request an exact-MPN stock confirmation for ATF22LV10CQZ-30JC. Stock availability should be checked against the required quantity and delivery date because the 28-PLCC commercial ordering variant may be managed through legacy inventory. Provide the full MPN, quantity, target date, and destination so the response reflects the actual order requirement.
What is the best Microchip equivalent for ATF22LV10CQZ-30JC?
The closest Microchip-family candidates are ATF22LV10CQZ-30JU, ATF22LV10CQZ-30JI, ATF22LV10CZ-25JI, and ATF22LV10CZ-25JC. The first two preserve the 30 ns speed grade, while the CZ candidates use a 25 ns grade and are therefore faster but not timing-identical. According to the manufacturer datasheet, all belong to the low-voltage ATF22LV10 family; confirm package, temperature grade, pin functions, and device programming before replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATF22LV10CQZ-30JC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ATF22LV10CQZ-30JC when the design requires the specific 10-macrocell ATF22LV10CQZ architecture, a 30 ns grade, 3.0 V to 5.5 V operation, and a 28-PLCC footprint. Select ATF22LV10CQZ-30JI when the industrial-temperature suffix is required and its documented operating limits fit the product. ATF22LV10CQZ-30JU is the closest same-speed ordering candidate when its grade is preferable. Choose ATF22LV10CZ-25JI or ATF22LV10CZ-25JC only when the 25 ns speed grade is useful and the device's architecture, programming, and temperature requirements have been reviewed. The GAL22V10D-20LJNI is a 20 ns 28-LCC candidate that may satisfy tighter timing, but it requires additional verification of configuration compatibility, pin behavior, supply range, and standby performance. For any substitution, preserve the original logic assignment, validate timing at the actual rail voltage, and confirm the exact manufacturer ordering code.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATF22LV10CQZ-30JU ATF22LV10CQZ-30JI ATF22LV10CZ-25JI ATF22LV10CZ-25JC GAL22V10D-20LJNI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-PLCC (11.51 mm x 11.51 mm) 28-PLCC family 28-PLCC family 28-LCC 28-LCC 28-LCC
Speed Grade 30 ns 30 ns 30 ns 25 ns 25 ns 20 ns
Macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Temperature Variant Commercial JC ordering variant JU ordering variant Industrial-temperature JI variant Industrial-temperature JI variant Commercial JC variant Industrial JNI ordering variant

মূল পার্থক্যসমূহ

  • Exact same-speed same-family configuration (বনামATF22LV10CQZ-30JI)
  • Faster timing option in the same ATF22LV10 family (বনামATF22LV10CZ-25JI)
  • Zero-standby-power CQZ family behavior (বনামGAL22V10D-20LJNI)

ডিজাইন নোট

Use the 28-PLCC land pattern and verify pin 1 orientation against the manufacturer package drawing before layout release. Keep the CLK, output-enable, power-down, and configuration-address routes away from noisy switching nodes, and place the device close to the signals it decodes or controls. Because the catalog library has no dedicated 28-PLCC key, the rendered package diagram uses the default library asset; PCB artwork must follow the official PLCC drawing rather than the generic diagram.

Follow the manufacturer supply and decoupling recommendations, including a low-impedance ground connection and the prescribed bypass capacitor placement. Treat the 3 uA typical value as an ATF22LV10CQZ standby figure, not an active-state consumption limit. When estimating dissipation, calculate active current from the datasheet operating conditions and use P = VIN × ICC, then add the power-down behavior only when the system actually invokes that mode.

Do not assume that all ATF22LV10C ordering variants are interchangeable without checking architecture, speed grade, temperature range, and package. The ATF22LV10CZ-25JI and ATF22LV10CZ-25JC options are faster than the 30 ns target, while the GAL22V10D-20LJNI candidate may use a different configuration or programming convention. Validate the JEDEC logic file, pin functions, timing assumptions, and power-down behavior before approving a substitute.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was found for the exact MPN. The ATF22LV10CQZ-30JI is identified as an industrial-temperature variant, but industrial temperature grading does not establish AEC-Q100 qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ATF22LV10CQZ-30JC datasheet ATF22LV10CQZ-30JC pinout ATF22LV10CQZ-30JC datasheet pdf ATF22LV10CQZ-30JC equivalent ATF22LV10CQZ-30JC replacement ATF22LV10CQZ-30JC price ATF22LV10CQZ-30JC stock Microchip ATF22LV10CQZ-30JC ATF22LV10CQZ vs ATF22LV10CZ ATF22LV10CQZ-30JC 28 PLCC ATF22LV10CQZ-30JC application circuit ATF22LV10CQZ 3.0V 5.5V

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology Atmel ATF22LV10CQZ-30JC ATF22LV10CQZ-30JU ATF22LV10CQZ-30JI ATF22LV10CZ-25JI ATF22LV10CZ-25JC GAL22V10D-20LJNI simple programmable logic device SPLD programmable logic device PLD electrically erasable flash memory CMOS 10 macrocells input transition detection ITD zero standby power 28-PLCC 28-LCC surface mount industrial control logic peripheral bus decoding programmable logic Microchip ATF22LV10C datasheet
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন