Microchip Technology

ATF22LV10CZ-25JC - 25ns 10-Macrocell PLD | Microchip

MPN: ATF22LV10CZ-25JC ✓ Active
3.0 V to 5.0 V Vdss 25 uA maximum Id 28-pin J-lead PLCC Package 40 MHz Speed
MOQ: 1 |

ATF22LV10CZ-25JC Overview

The Microchip ATF22LV10CZ-25JC is a high-performance electrically erasable CMOS programmable logic device with 10 macrocells, approximately 500 logic gates, a 25 ns propagation delay, and operation from 3.3 V to 5 V. The device is offered in a 28-pin J-lead PLCC package measuring 11.51 mm by 11.51 mm. It combines erasable Flash memory with a simple PLD architecture for compact glue-logic, control, decoding, and interface designs.

A simple programmable logic device is a semiconductor that stores a fixed logic function in nonvolatile memory and implements it through configurable AND-array and OR-array connections. Within the broader hierarchy, an SPLD is a programmable logic device, which is a form of digital integrated circuit and logic IC. The ATF22LV10CZ series provides a practical middle ground between individual gates and more complex programmable logic arrays.

The ATF22LV10CZ-25JC provides 10 macrocells, a nominal 25 ns speed grade, 3.3 V and 5 V operation, and standby current of no more than 25 microamperes. Input and output keeper circuits retain previous logic levels while inputs and outputs are idle, eliminating the static current normally consumed by external pull-up resistors. These features support compact designs where deterministic state retention and low standby consumption are important.

At the device level, the electrically erasable Flash configuration allows the logic design to be reprogrammed without a dedicated programmer that uses ultraviolet erasure. The 25 ns speed grade is suited to control paths and moderate-speed interface logic rather than high-frequency synchronous datapaths. Designers should also account for the output-delay and setup requirements of the specific system clock when evaluating timing closure.

Typical uses include bus decoding, address and chip-select logic, sequencer control, interface arbitration, legacy peripheral adaptation, and small state-machine implementations. The device is especially useful in industrial, communications, and embedded-control equipment where compact fixed logic can reduce component count while remaining electrically erasable.

The principal design consideration is the 28-pin PLCC footprint. PLCC sockets remain practical for prototype and legacy maintenance work, but modern production boards may favor surface-mount packages, so mechanical availability should be checked before a new design begins. The manufacturer datasheet should be used for the complete pin description, timing limits, recommended operating conditions, and programming procedure.

This page combines the ATF22LV10CZ-25JC device identity, package information, verified engineering characteristics, candidate pin-compatible alternatives, and practical implementation guidance in one design-focused reference. It also distinguishes speed-, temperature-, and supply-related differences so engineers can assess replacement risk before modifying an existing PCB.

Drop-in alternatives for ATF22LV10CZ-25JC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with ATF22LV10CZ-25JC (same form factor and footprint) — differing in Device Type, Supply Voltage Range, Architecture, Package Type, Standby Current.

Microchip Technology
Supply Voltage Range: 3.0 V to 5.5 V
Architecture: 10-macrocell CMOS SPLD
Standby Current: 3 uA typical
Compare with ATF22LV10CZ-25JC →
Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Supply Voltage Range: 3.0 V to 5.5 V
Architecture: High-performance CMOS programmable logic device
Compare with ATF22LV10CZ-25JC →
Microchip Technology
Device Type: Simple Programmable Logic Device (SPLD), electrically erasable
Supply Voltage Range: 3.3 V to 5 V
Architecture: 22V10
Compare with ATF22LV10CZ-25JC →

ATF22LV10CZ-25JI

✅ Drop-In
Microchip Technology
📦 28-pin J-lead PLCC (11.51 mm x 11.51 mm)
Electrically Erasable Programmable Logic Device (EEPLD) · ATF22LV10C · 10 macrocells · 500 gates · 25 ns · 3.0 V to 5.5 V · 3.3 V and 5 V · Electrically erasable flash memory

Contact for price

View Datasheet →

ATF22LV10CZ-25PC

✅ Drop-In
Microchip Technology
📦 28-pin J-lead PLCC (11.51 mm x 11.51 mm)
Simple Programmable Logic Device (SPLD), electrically erasable · 22V10 · 500 gates · 10 macrocells · 25 ns · 40 MHz · 3.3 V to 5 V · 3.3 V

Contact for price

View Datasheet →

ATF22LV10C-10JC

✅ Drop-In
Microchip Technology
📦 28-pin J-lead PLCC (11.51 mm x 11.51 mm)
Simple programmable logic device (SPLD) · CMOS electrically erasable flash programmable logic · 10 macrocells · 500 gates · 10 ns · 3.0 V to 5.5 V · 10 uA typical · 10 mA

Contact for price

View Datasheet →

ATF22LV10CQZ-30JC

✅ Drop-In
Microchip Technology
📦 28-pin J-lead PLCC (11.51 mm x 11.51 mm)
Simple programmable logic device (SPLD) · Electrically erasable flash memory · 10 macrocells · ATF22LV10CQZ · 30 ns · 25 ns · 3.0 V to 5.5 V · 3 uA typical

Contact for price

View Datasheet →

GAL22V10D-10QJ

✅ Drop-In
📦 28-pin PLCC
Both provide 10 macrocells in a 28-pin PLCC, but the GAL22V10D-10QJ is a 10 ns 5 V fuse-programmed device versus the ATF22LV10CZ-25JC's 25 ns 3.3 V/5 V Flash architecture.

📋 Reference alternative (not in catalog)

ATF22LV10CZ-25JC Maximum Ratings & Electrical Characteristics

Device Type Simple programmable logic device (SPLD)
Configuration Technology Electrically erasable CMOS Flash memory
Macrocell Count 10 macrocells
Logic Gate Capacity Approximately 500 gates
Propagation Delay 25 ns
Maximum Frequency 40 MHz
Supply Voltage Range 3.0 V to 5.0 V
Nominal Supply Voltages 3.3 V and 5 V
Standby Current 25 uA maximum
Input Keeper Circuits Yes
Output Keeper Circuits Yes
Package Type 28-pin J-lead PLCC
Package Dimensions 11.51 mm x 11.51 mm
Terminal Count 28 terminals
Terminal Form J-lead
Temperature Grade Commercial
Mounting Type Surface mount
Programming Method Electrically erasable Flash programming

ATF22LV10CZ-25JC 11.51 mm x 11.51 mm Pin Configuration Guide

Pin configuration for ATF22LV10CZ-25JC (11.51 mm x 11.51 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

11.51 mm x 11.51 mm package pinout diagram for ATF22LV10CZ-25JC

No detailed pinout data available for ATF22LV10CZ-25JC.

Refer to the datasheet for full pin configuration.

Typical Applications

ATF22LV10CZ-25JC is suitable for 6 applications: Address Decoding and Chip Select, Industrial Control Sequencing, Legacy Peripheral Interface Adaptation, Communications Control Logic, Audio and Display Control, Programmable Test and Measurement Logic.

🔧

Address Decoding and Chip Select

The ATF22LV10CZ-25JC fits compact address-decoding logic because its 10 macrocells can implement several decode equations while its 25 ns propagation delay provides timing margin for moderate-speed control paths. Place the device between an address bus and one or more chip-select outputs, then use the keeper circuits to retain input states during idle periods. The 3.0 V minimum operating voltage supports 3.3 V systems, while the 28-pin PLCC package permits serviceable prototype construction. Review the datasheet timing tables against the decoder’s required setup, hold, and output-valid intervals.

🏭

Industrial Control Sequencing

The ATF22LV10CZ-25JC can implement compact state-transition and sequencing logic for industrial control boards where 10 macrocells provide enough capacity for a compact state machine. Its 25 ns grade is appropriate for ordinary control and handshake paths rather than high-speed processor datapaths, and the keeper circuits help avoid floating control inputs during idle periods. The commercial-grade JC ordering code must remain within its specified ambient-temperature range; use ATF22LV10CZ-25JI when industrial-temperature operation is required. Verify reset-state behavior and every timing path before releasing a production design.

🔧

Legacy Peripheral Interface Adaptation

The ATF22LV10CZ-25JC is useful when adapting a legacy peripheral whose handshake signals do not match a modern controller. Ten macrocells can generate request, acknowledge, busy, and command-control signals without adding a large FPGA or processor. Its electrically erasable Flash configuration allows interface revisions during maintenance, while the 25 ns propagation delay suits moderate-speed asynchronous handshakes. Confirm that each replacement function has adequate timing margin and that output polarity, drive strength, and keeper behavior match the original interface. The PLCC package also supports socketed service boards and straightforward component replacement.

🌐

Communications Control Logic

The ATF22LV10CZ-25JC can support framing, command parsing, and peripheral-selection logic in communications equipment where a small amount of deterministic parallel logic is needed. The 10-macrocell device is more appropriate than a general CPLD when the equations are modest and fixed, while the 25 ns speed grade accommodates many control and status paths. Its 3.0 V to 5.0 V operating range allows integration into mixed legacy interface boards. Engineers should validate setup and hold timing against the host bus and account for output-state changes during configuration using the manufacturer timing and keeper-circuit information.

🎧

Audio and Display Control

The ATF22LV10CZ-25JC can implement mute, mode-select, indicator, and sequencing functions around audio or display subsystems. The device is better suited to control and status functions than high-bandwidth audio or video data paths, and its 10 macrocells allow several related functions to be consolidated. The 25 ns propagation delay is suitable for ordinary control sequencing, while the keeper circuits reduce unwanted static current from undriven control inputs. Check output timing against the connected codec, display, or interface device and use the datasheet to confirm supply-current limits across the intended operating mode.

🖥️

Programmable Test and Measurement Logic

The ATF22LV10CZ-25JC is suitable for compact fixtures that combine limit comparisons, routing decisions, and front-panel control. Electrically erasable Flash permits design revisions without ultraviolet erasure, which is useful when test requirements evolve. Its 10 macrocells and 25 ns speed grade suit low- to moderate-speed control functions but not high-speed sampling or instrumentation timing paths. For a new instrument platform, confirm that the PLCC component remains mechanically available and that the programmed device can be tested with a supported programmer. Validate every timing path and input threshold against the measured signals.

Where can I buy ATF22LV10CZ-25JC online?
Use the Request a Quote form on this page to request ATF22LV10CZ-25JC availability, packaging, and a current quotation. The exact MPN is a 28-pin J-lead PLCC device with 10 macrocells and a 25 ns speed grade. Confirm that the quoted line includes the -25JC suffix because temperature grade, package, and speed options use different orderable part numbers.
What is the price of ATF22LV10CZ-25JC?
The current price of ATF22LV10CZ-25JC is obtained through the Request a Quote form on this page. The exact device is identified by its 25 ns speed grade, commercial temperature grade, and 28-pin J-lead PLCC package. Request the quantity break and required shipping packaging at the same time so the quotation reflects the intended production volume.
What is the lead time for ATF22LV10CZ-25JC?
Request the current lead time and minimum order quantity for ATF22LV10CZ-25JC through the Request a Quote form on this page. Lead time can vary with order quantity, programmed or unprogrammed delivery, and the required shipping method, so it should be confirmed for the exact 28-pin PLCC order code rather than inferred from other ATF22LV10CZ variants.
Is ATF22LV10CZ-25JC in stock?
Current stock status for ATF22LV10CZ-25JC should be confirmed through the Request a Quote form on this page. The part is a catalogued 28-pin PLCC device containing 10 macrocells and a 25 ns speed grade. Include the desired quantity, delivery date, and whether the device must be programmed before shipment when requesting confirmation.
What are the key specifications of ATF22LV10CZ-25JC that engineers should know?
The ATF22LV10CZ-25JC is a 25 ns, 10-macrocell SPLD with approximately 500 gates, 3.0 V to 5.0 V operation, and 25 uA maximum standby current. According to the manufacturer datasheet, input and output keeper circuits preserve previous logic levels during idle periods. The device is packaged in a 28-pin J-lead PLCC measuring 11.51 mm by 11.51 mm.
What is ATF22LV10CZ-25JC and where is its datasheet PDF?
The ATF22LV10CZ-25JC is an electrically erasable CMOS simple programmable logic device with 10 macrocells and a 25 ns speed grade. The manufacturer datasheet PDF is available through the datasheet link on this page. It contains the electrical characteristics, timing tables, pin description, ordering information, and programming details needed for design review.
Where can I find the ATF22LV10CZ-25JC pinout?
Use the pin-description table in the ATF22LV10CZ-25JC manufacturer datasheet when assigning PCB tracks. The device uses a 28-pin J-lead PLCC with pins numbered counterclockwise from pin 1. Because the exact public library diagram for this PLCC package is unavailable, use the manufacturer package drawing and pin table rather than relying on a generic 28-pin footprint image.
ATF22LV10CZ-25JC vs ATF22LV10CZ-25JI - which is better?
Choose ATF22LV10CZ-25JI when industrial-temperature operation is required; the -25JC suffix identifies the commercial-temperature version. Both devices are identified as 25 ns, 10-macrocell ATF22LV10CZ devices in a 28-pin J-lead PLCC. Verify every operating-temperature-dependent limit in the manufacturer datasheet before treating the two order codes as interchangeable.
ATF22LV10CZ-25JC vs ATF22LV10CQZ-30JC - which is better?
Choose ATF22LV10CZ-25JC when the 25 ns grade provides necessary timing margin; the ATF22LV10CQZ-30JC has a 30 ns speed grade and is therefore slower by 5 ns. Both use the 28-pin PLCC format, but the CQZ designation also combines different power and performance characteristics. Confirm the complete timing and supply requirements before substituting one for the other.
When should I choose ATF22LV10CZ-25JC over ATF22LV10CZ-25JI?
Choose ATF22LV10CZ-25JC for commercial-temperature equipment that does not require the industrial-temperature rating associated with ATF22LV10CZ-25JI. The -JC version provides the same 25 ns speed grade and 28-pin J-lead PLCC organization. Use ATF22LV10CZ-25JI instead when ambient-temperature requirements exceed the commercial operating range.
Is ATF22LV10CZ-25JC suitable for interface and control logic?
Yes, ATF22LV10CZ-25JC is suitable for compact interface, decoding, sequencing, and fixed control logic. Its 10 macrocells and approximately 500 gates are appropriate for small glue-logic functions, while the 25 ns propagation delay supports moderate-speed control paths. Its electrically erasable Flash configuration also allows logic revisions without ultraviolet erasure.
What can replace ATF22LV10CZ-25JC?
ATF22LV10CZ-25JI is a close same-footprint candidate when industrial-temperature operation is acceptable. ATF22LV10CZ-25PC and ATF22LV10CQZ-30JC are also 28-pin PLCC family candidates, but their speed and ordering details must be checked. The GAL22V10D-10QJ is a cross-brand architectural candidate requiring explicit pin, timing, voltage, and programming verification.
What is the best Lattice equivalent for ATF22LV10CZ-25JC?
The GAL22V10D-10QJ is the closest listed Lattice Semiconductor candidate because cross-reference information identifies it as a 10-macrocell GAL-family device in a 28-pin PLCC package. It is not automatically interchangeable with ATF22LV10CZ-25JC: the speed, supply-voltage, macrocell fuse-map, programming, and timing differences require design-level review before substitution.
Can GAL22V10D-10QJ replace ATF22LV10CZ-25JC?
The GAL22V10D-10QJ may serve as a 28-pin PLCC architectural alternative, but it should not be treated as a guaranteed drop-in replacement. ATF22LV10CZ-25JC is a 3.3 V/5 V electrically erasable Flash SPLD, whereas the GAL device uses a different fuse-programmed architecture and has different electrical timing. Verify every pin, macrocell, voltage, and programming requirement.
What design information should be checked before replacing ATF22LV10CZ-25JC?
Check package pinout, macrocell architecture, supply-voltage limits, propagation delay, setup and hold timing, output behavior, programming method, and the exact programming file format. The ATF22LV10CZ-25JC uses 10 macrocells, operates down to 3.0 V, and has a 25 ns speed grade. A mechanical footprint match alone does not guarantee logic compatibility or timing equivalence.
Does ATF22LV10CZ-25JC retain input and output logic states when idle?
Yes. According to the manufacturer datasheet, keeper circuits on input and output pins hold the previous logic levels when the device is idle. This eliminates static power consumed by pull-up resistors and helps prevent undefined control inputs. The keeper behavior should still be considered when the surrounding system expects a valid output during reset, power-up, or programming transitions.

Engineering reference data for ATF22LV10CZ-25JC — comparison, design guidance, and compliance information.

Selection Guide

Choose ATF22LV10CZ-25JC for compact commercial-temperature control, decoding, or interface logic that requires a 25 ns Flash-programmable SPLD and 3.3 V or 5 V operation. Select ATF22LV10CZ-25JI when the same speed and electrical organization are needed with an industrial-temperature grade. ATF22LV10C-10JC offers a faster 10 ns grade for designs that can benefit from additional timing margin, although it may require different power or timing review. ATF22LV10CQZ-30JC is slower by 5 ns and is appropriate only when its complete power and timing characteristics satisfy the design. Consider GAL22V10D-10QJ only for cross-brand programs that can accommodate a 5 V fuse-programmed device and complete logic conversion. In every case, verify the manufacturer pin table, timing limits, supply requirements, programming architecture, and exact order code before approving a substitution.

Comparison with Alternatives

Parameter This Product ATF22LV10CZ-25JI ATF22LV10CZ-25PC ATF22LV10C-10JC ATF22LV10CQZ-30JC GAL22V10D-10QJ
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Lattice Semiconductor
Package 28-pin J-lead PLCC (11.51 mm x 11.51 mm) 28-pin J-lead PLCC 28-pin J-lead PLCC 28-pin J-lead PLCC 28-pin J-lead PLCC 28-pin PLCC
Propagation Delay 25 ns 25 ns 25 ns 10 ns 30 ns 10 ns
Macrocell Count 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Configuration Memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Electrically erasable Flash memory Fuse-programmed architecture

Key Differentiators

  • Commercial-temperature ordering code with a 25 ns speed grade (vs ATF22LV10CZ-25JI)
  • Faster speed grade than the 30 ns CQZ candidate (vs ATF22LV10CQZ-30JC)
  • Electrically erasable Flash configuration (vs GAL22V10D-10QJ)
  • Lower-voltage 3.3 V operation (vs GAL22V10D-10QJ)

Design Notes

Do not treat a matching PLCC footprint as proof of logic compatibility. Before replacing ATF22LV10CZ-25JC, compare the complete pin description, macrocell architecture, product terms, supply-voltage limits, input and output timing, output behavior, and programming method. The GAL22V10D-10QJ, for example, is a fuse-programmed 5 V architecture rather than a 3.3 V/5 V electrically erasable Flash device, so its programmed logic file and timing behavior must be reviewed explicitly.

Confirm the J-lead land pattern, pin-1 orientation, solder-process requirements, and component availability before laying out a new PCB. The ATF22LV10CZ-25JC is a 28-pin J-lead PLCC measuring 11.51 mm by 11.51 mm, so a generic QFP-style footprint is not interchangeable. For maintenance and prototype boards, a correctly keyed socket can simplify replacement; for high-volume production, verify component handling, moisture protection, assembly temperature, and the selected package's recommended land pattern.

Use the datasheet timing tables to check propagation delay, output transitions, setup, hold, and skew for every control path. The 25 ns grade is appropriate for many ordinary asynchronous control functions but does not by itself guarantee system timing margin. Account for external bus loading, connector delay, and any skew introduced by long PCB traces. A slower 30 ns alternative may still work at moderate frequencies, but it reduces timing margin by 5 ns relative to the target grade.

Decouple the supply pins close to the device and follow the manufacturer recommended capacitor network and layout. The ATF22LV10CZ-25JC supports operation down to 3.0 V and is associated with 3.3 V and 5 V classes, so supply tolerance and ripple must remain within the applicable electrical-characteristics limits. Keeper circuits reduce current caused by floating inputs during idle periods, but they do not replace deliberate pull-up or pull-down design in every power-up and reset scenario.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified. AEC-Q100 is shown as unknown rather than not applicable because the industrial-temperature alternative is distinct from the commercial-grade target.

Related Searches

ATF22LV10CZ-25JC datasheet ATF22LV10CZ-25JC pinout ATF22LV10CZ-25JC datasheet pdf ATF22LV10CZ-25JC equivalent ATF22LV10CZ-25JC replacement ATF22LV10CZ-25JC price ATF22LV10CZ-25JC stock Microchip ATF22LV10CZ-25JC ATF22LV10CZ 28 PLCC ATF22LV10CZ-25JC application circuit ATF22LV10CZ-25JC vs GAL22V10D-10QJ ATF22LV10CZ-25JC cross reference

Related Components & Terms

Microchip Technology ATF22LV10CZ-25JC ATF22LV10CZ-25JI ATF22LV10CZ-25PC ATF22LV10C-10JC ATF22LV10CQZ-30JC GAL22V10D-10QJ Lattice Semiconductor simple programmable logic device SPLD programmable logic device logic IC electrically erasable CMOS Flash memory 10 macrocells 500 gates 25 ns propagation delay 3.3 V power supply 5 V power supply keeper circuits 28-pin J-lead PLCC PLCC package family surface-mount package address decoding industrial control
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details