ATSAMD20J15B-AU - 48MHz Cortex-M0+ 32KB MCU | Microchip
MPN: ATSAMD20J15B-AU ✓ সক্রিয়ATSAMD20J15B-AU সারাংশ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The ATSAMD20J15 belongs to the SAM D20 family, part of Microchip's embedded and power-management portfolio. Its Cortex-M0+ architecture combines a compact 32-bit instruction set with deterministic real-time execution, while the embedded flash and SRAM allow firmware, configuration data, and working state to share the same device.
Key features include a 48 MHz maximum clock, 32 KB of program flash, 4 KB of SRAM, and 10-bit and 12-bit analog conversion capability. The 64-TQFP-EP package provides a conventional leaded footprint and an exposed thermal pad for heat dissipation. The -AU ordering code identifies the industrial-temperature, tray-oriented variant, and the green finish designation confirms that the component is RoHS 3 compliant.
The device's 1.6 V to 3.6 V operating range supports low-voltage embedded systems where the MCU directly interfaces with 3.3 V peripherals. The SAM D20 family is intended for compact control systems in which a low-power Cortex-M0+ core, local flash, and mixed-signal peripherals can replace a larger host processor. Its operating architecture supports event-driven firmware, peripheral interrupt handling, and deterministic control without requiring external memory.
Typical applications include home-automation controllers, consumer appliances, utility metering, industrial control modules, and low-power sensor nodes. The ATSAMD20J15B-AU is especially suitable where local control, analog measurement, serial communications, and modest firmware storage are required within a single mixed-signal controller.
PCB design should preserve the exposed-pad thermal and electrical requirements, provide clean power and ground connections, and route high-speed or sensitive analog signals away from switching nodes. Before firmware deployment, confirm the exact peripheral pin assignments, clock configuration, and exposed-pad land pattern against the manufacturer ATSAMD20J15 datasheet and package drawing.
This page combines the manufacturer product information with package, pricing, replacement, and engineering guidance. It also distinguishes electrically similar SAM D20 devices from packaging-only order-code changes, helping designers assess whether an existing board can be reused without hidden PCB or firmware differences.
এর জন্য ড্রপ-ইন বিকল্প ATSAMD20J15B-AU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ATSAMD20J15B-AU (একই form factor এবং footprint) — পার্থক্য রয়েছে Flash Memory, Package, RoHS Status.
ATSAMD20J18B-AU
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATSAMD20J19B-AU
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATSAMD20J20B-AU
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATSAMD20J21B-AU
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ATSAMD20J15B-AUT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ATSAMD20J15B-AU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M0+ flash microcontroller |
| Series | SAM D20 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB |
| SRAM | 4 KB |
| Architecture | 32-bit ARM Cortex-M0+ |
| ADC Resolution | 10-bit and 12-bit |
| Operating Voltage | 1.6 V to 3.6 V |
| অপারেটিং তাপমাত্রা | Industrial temperature grade |
| প্যাকেজ | 64-TQFP with exposed pad, 10 mm x 10 mm |
| মাউন্টিং টাইপ | Surface mount |
| Core Count | 1 core |
| Program Memory Type | Flash |
| RoHS স্ট্যাটাস | RoHS 3 compliant |
| Lead Finish | Green |
| Order Code | ATSAMD20J15B-AU |
ATSAMD20J15B-AU 64-tqfp with exposed pad, 10 mm x 10 mm পিন কনফিগারেশন গাইড
ATSAMD20J15B-AU (64-tqfp with exposed pad, 10 mm x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATSAMD20J15B-AU.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATSAMD20J15B-AU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Home Automation Controller, Utility Metering Module, Industrial Sensor Node, Consumer Appliance Controller, Low-Power Monitoring Device, Embedded Communication Controller.
Home Automation Controller
The ATSAMD20J15B-AU fits compact home-automation controllers that coordinate sensors, relays, indicators, and user interfaces. Its 48 MHz ARM Cortex-M0+ core provides deterministic control for event-driven firmware, while 32 KB of flash stores application logic and 4 KB of SRAM supports protocol buffers and working state. The 1.6 V to 3.6 V operating range is suitable for low-voltage 3.3 V systems. Use the 10-bit or 12-bit ADC channels for battery or sensor-node voltage measurement, and allocate communication peripherals according to the package pin table. The 64-TQFP exposed-pad package also provides a practical thermal path when the MCU remains active for extended periods.
সুপারিশকৃত
Utility Metering Module
The ATSAMD20J15B-AU is appropriate for metering modules that must measure analog quantities and retain configuration data locally. Its 10-bit and 12-bit ADC capability supports multiple measurement resolutions, while the 32 KB flash provides space for calibration parameters, event logs, and communication firmware. The 4 KB SRAM allows transient measurement and protocol data to be processed without external memory. Operating from 1.6 V to 3.6 V supports integration with low-energy sensing circuits and regulated 3.3 V rails. The industrial-temperature ordering code is useful for deployed equipment expected to operate outside consumer-only temperature conditions.
সুপারিশকৃত
Industrial Sensor Node
The ATSAMD20J15B-AU can serve as the control and communications hub in a compact industrial sensor node. The Cortex-M0+ architecture handles periodic sampling, filtering, and interrupt-driven sensor updates, while the integrated ADC supports analog sensor interfaces. With 32 KB of flash and 4 KB of SRAM, the device accommodates local firmware and short working buffers without requiring a separate host processor. Its 48 MHz clock provides computational margin for protocol handling and control logic. Use the exposed thermal pad as part of the board's heat-spreading structure and follow the package drawing for its electrical connection and soldering requirements.
সুপারিশকৃত
Consumer Appliance Controller
The ATSAMD20J15B-AU suits cost-conscious appliance controllers that coordinate inputs, outputs, and simple analog measurements. Its 48 MHz Cortex-M0+ core is sufficient for motor-sequencing logic, button handling, timers, and communication tasks, while the 32 KB flash accommodates a focused application program. The 1.6 V to 3.6 V range aligns with compact low-voltage control boards, and the 10-bit and 12-bit ADC capabilities can be used for temperature, level, or supply monitoring. Designers should map peripheral functions through the pin-description table and preserve the exposed-pad geometry when constructing the PCB land pattern.
সুপারিশকৃত
Low-Power Monitoring Device
The ATSAMD20J15B-AU is suitable for a low-power monitoring device that must acquire measurements and remain responsive without a high-performance host processor. The 32-bit Cortex-M0+ core, 32 KB flash, and 4 KB SRAM provide enough local resources for sampling sequences, thresholds, logging, and status reporting. ADC operation at either 10-bit or 12-bit resolution lets designers balance measurement granularity against processing and power requirements. The device's 1.6 V minimum operating voltage supports low-voltage designs, while sleep-mode current should be evaluated from the manufacturer datasheet for the final clocking and peripheral configuration.
সুপারিশকৃত
Embedded Communication Controller
The ATSAMD20J15B-AU can act as a dedicated communication controller in compact embedded equipment. The 48 MHz Cortex-M0+ core supports protocol state machines, data framing, timeout handling, and interrupt servicing, while 4 KB of SRAM provides space for transient receive and transmit buffers. Firmware and configuration data fit within the 32 KB flash capacity for focused applications. Communication peripheral assignments must be selected from the exact pin-multiplexing options rather than assumed by peripheral count. The 64-TQFP package provides exposed-pad access for heat dissipation in continuously active control equipment.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATSAMD20J15B-AU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ATSAMD20J18B-AU | ATSAMD20J19B-AU | ATSAMD20J20B-AU | ATSAMD20J21B-AU | ATSAMD20J15B-AUT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP-EP, 10 mm x 10 mm | 64-TQFP-EP, 10 mm x 10 mm | 64-TQFP-EP, 10 mm x 10 mm | 64-TQFP-EP, 10 mm x 10 mm | 64-TQFP-EP, 10 mm x 10 mm | 64-TQFP-EP, 10 mm x 10 mm |
| Core | 32-bit ARM Cortex-M0+ | 32-bit ARM Cortex-M0+ | 32-bit ARM Cortex-M0+ | 32-bit ARM Cortex-M0+ | 32-bit ARM Cortex-M0+ | 32-bit ARM Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Shipping Format | Tray | Tray | Tray | Tray | Tray | Tape & Reel |
মূল পার্থক্যসমূহ
- Exact same-device option for reel-fed production (বনামATSAMD20J15B-AUT)
- Matching 48 MHz Cortex-M0+ performance in the same TQFP footprint (বনামATSAMD20J18B-AU)
- Local flash and SRAM eliminate external memory for compact designs (বনামATSAMD20J19B-AU)
ডিজাইন নোট
Construct the exposed-pad land pattern from the manufacturer package drawing rather than treating it as an optional thermal feature. Keep the exposed-pad footprint compatible with the 64-TQFP lead geometry, use the recommended via pattern, and connect the pad to the appropriate ground plane. Because this MCU can operate at 48 MHz, short ground-return paths and a stable supply plane are important for predictable peripheral behavior.
Provide local decoupling exactly as specified in the ATSAMD20J15 power-supply recommendations. Place the principal capacitor and high-frequency bypass capacitors close to their associated supply pins, with short ground connections and a low-impedance ground plane. The accepted supply range is 1.6 V to 3.6 V; include a regulated source capable of supporting the 48 MHz operating mode and the final peripheral load without excessive supply ripple.
Assign pins from the exact ATSAMD20J15B pin-description and multiplexing tables before freezing the PCB. Maintain separation between analog inputs, communication signals, and switching nodes, and route sensitive analog traces away from high-current outputs. Because the device offers both 10-bit and 12-bit ADC modes, use the manufacturer grounding and reference recommendations to minimize conversion error near the board's power-distribution structures.
Do not substitute ATSAMD20J15B-MU for ATSAMD20J15B-AU on an existing board: the former uses a 9 mm by 9 mm VQFN package, while the target uses a 10 mm by 10 mm TQFP package. Also distinguish the -AU and -AUT order codes by assembly format. Verify firmware compatibility, peripheral mapping, memory size, package drawing, and exposed-pad layout together before releasing a production BOM.
কমপ্লায়েন্স তথ্য
The component is identified as RoHS 3 compliant with a green finish. It is an industrial-temperature MCU rather than an AEC-Q100-qualified automotive device. REACH, halogen-free, and conflict-minerals declarations were not identified.