Microchip Technology

ATSAMD20J15B-AU - 48MHz Cortex-M0+ 32KB MCU | Microchip

MPN: ATSAMD20J15B-AU ✓ فعال
1.6 V to 3.6 V Vdss 64-TQFP with exposed pad, 10 mm x 10 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

ATSAMD20J15B-AU جائزہ

The Microchip ATSAMD20J15B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, with 32 KB of flash memory, 4 KB of SRAM, and 10-bit and 12-bit ADC capability. It is supplied in a 64-lead TQFP package with an exposed pad, measuring 10 mm by 10 mm, and is specified for industrial-temperature operation.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The ATSAMD20J15 belongs to the SAM D20 family, part of Microchip's embedded and power-management portfolio. Its Cortex-M0+ architecture combines a compact 32-bit instruction set with deterministic real-time execution, while the embedded flash and SRAM allow firmware, configuration data, and working state to share the same device.

Key features include a 48 MHz maximum clock, 32 KB of program flash, 4 KB of SRAM, and 10-bit and 12-bit analog conversion capability. The 64-TQFP-EP package provides a conventional leaded footprint and an exposed thermal pad for heat dissipation. The -AU ordering code identifies the industrial-temperature, tray-oriented variant, and the green finish designation confirms that the component is RoHS 3 compliant.

The device's 1.6 V to 3.6 V operating range supports low-voltage embedded systems where the MCU directly interfaces with 3.3 V peripherals. The SAM D20 family is intended for compact control systems in which a low-power Cortex-M0+ core, local flash, and mixed-signal peripherals can replace a larger host processor. Its operating architecture supports event-driven firmware, peripheral interrupt handling, and deterministic control without requiring external memory.

Typical applications include home-automation controllers, consumer appliances, utility metering, industrial control modules, and low-power sensor nodes. The ATSAMD20J15B-AU is especially suitable where local control, analog measurement, serial communications, and modest firmware storage are required within a single mixed-signal controller.

PCB design should preserve the exposed-pad thermal and electrical requirements, provide clean power and ground connections, and route high-speed or sensitive analog signals away from switching nodes. Before firmware deployment, confirm the exact peripheral pin assignments, clock configuration, and exposed-pad land pattern against the manufacturer ATSAMD20J15 datasheet and package drawing.

This page combines the manufacturer product information with package, pricing, replacement, and engineering guidance. It also distinguishes electrically similar SAM D20 devices from packaging-only order-code changes, helping designers assess whether an existing board can be reused without hidden PCB or firmware differences.

کے لیے ڈراپ اِن متبادل ATSAMD20J15B-AU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATSAMD20J15B-AU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Flash Memory, Package, RoHS Status.

Microchip Technology
Flash Memory: 32 KB (32K x 8)
Package: 64-pin TQFP-EP (10x10 mm)
RoHS Status: Compliant
موازنہ کریں ATSAMD20J15B-AU →

ATSAMD20J18B-AU

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 64-TQFP with exposed pad, 10 mm x 10 mm
SAM D20 family device with a different flash capacity; memory and peripheral differences require firmware and BOM review

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMD20J19B-AU

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 64-TQFP with exposed pad, 10 mm x 10 mm
SAM D20 family device with increased memory capacity; clock and package are retained but flash and SRAM allocation differ

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMD20J20B-AU

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 64-TQFP with exposed pad, 10 mm x 10 mm
SAM D20 family device with increased memory capacity; retains the 48 MHz class of performance and matching package

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMD20J21B-AU

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 64-TQFP with exposed pad, 10 mm x 10 mm
Higher-memory SAM D20 family option in the matching package; exact memory and peripheral deltas require datasheet verification

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ATSAMD20J15B-AUT

✅ ڈراپ-اِن
Microchip Technology
📦 64-TQFP with exposed pad, 10 mm x 10 mm
ARM Cortex-M0+ · 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · 1.62 V to 3.63 V · -40C to +85C (industrial, AUT grade) · 64-pin TQFP-EP (10x10 mm)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ATSAMD20J15B-AU زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ARM Cortex-M0+ flash microcontroller
Series SAM D20
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
SRAM 4 KB
Architecture 32-bit ARM Cortex-M0+
ADC Resolution 10-bit and 12-bit
Operating Voltage 1.6 V to 3.6 V
آپریٹنگ درجہ حرارت Industrial temperature grade
پیکیج 64-TQFP with exposed pad, 10 mm x 10 mm
ماؤنٹنگ ٹائپ Surface mount
Core Count 1 core
Program Memory Type Flash
RoHS اسٹیٹس RoHS 3 compliant
Lead Finish Green
Order Code ATSAMD20J15B-AU

ATSAMD20J15B-AU 64-tqfp with exposed pad, 10 mm x 10 mm پن کنفیگریشن گائیڈ

ATSAMD20J15B-AU (64-tqfp with exposed pad, 10 mm x 10 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

ATSAMD20J15B-AU کے لیے 64-tqfp with exposed pad, 10 mm x 10 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATSAMD20J15B-AU.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ATSAMD20J15B-AU کے لیے موزوں ہے 6 ایپلیکیشنs: Home Automation Controller, Utility Metering Module, Industrial Sensor Node, Consumer Appliance Controller, Low-Power Monitoring Device, Embedded Communication Controller.

🧩

Home Automation Controller

The ATSAMD20J15B-AU fits compact home-automation controllers that coordinate sensors, relays, indicators, and user interfaces. Its 48 MHz ARM Cortex-M0+ core provides deterministic control for event-driven firmware, while 32 KB of flash stores application logic and 4 KB of SRAM supports protocol buffers and working state. The 1.6 V to 3.6 V operating range is suitable for low-voltage 3.3 V systems. Use the 10-bit or 12-bit ADC channels for battery or sensor-node voltage measurement, and allocate communication peripherals according to the package pin table. The 64-TQFP exposed-pad package also provides a practical thermal path when the MCU remains active for extended periods.

🏭

Utility Metering Module

The ATSAMD20J15B-AU is appropriate for metering modules that must measure analog quantities and retain configuration data locally. Its 10-bit and 12-bit ADC capability supports multiple measurement resolutions, while the 32 KB flash provides space for calibration parameters, event logs, and communication firmware. The 4 KB SRAM allows transient measurement and protocol data to be processed without external memory. Operating from 1.6 V to 3.6 V supports integration with low-energy sensing circuits and regulated 3.3 V rails. The industrial-temperature ordering code is useful for deployed equipment expected to operate outside consumer-only temperature conditions.

🏭

Industrial Sensor Node

The ATSAMD20J15B-AU can serve as the control and communications hub in a compact industrial sensor node. The Cortex-M0+ architecture handles periodic sampling, filtering, and interrupt-driven sensor updates, while the integrated ADC supports analog sensor interfaces. With 32 KB of flash and 4 KB of SRAM, the device accommodates local firmware and short working buffers without requiring a separate host processor. Its 48 MHz clock provides computational margin for protocol handling and control logic. Use the exposed thermal pad as part of the board's heat-spreading structure and follow the package drawing for its electrical connection and soldering requirements.

🔧

Consumer Appliance Controller

The ATSAMD20J15B-AU suits cost-conscious appliance controllers that coordinate inputs, outputs, and simple analog measurements. Its 48 MHz Cortex-M0+ core is sufficient for motor-sequencing logic, button handling, timers, and communication tasks, while the 32 KB flash accommodates a focused application program. The 1.6 V to 3.6 V range aligns with compact low-voltage control boards, and the 10-bit and 12-bit ADC capabilities can be used for temperature, level, or supply monitoring. Designers should map peripheral functions through the pin-description table and preserve the exposed-pad geometry when constructing the PCB land pattern.

⚡

Low-Power Monitoring Device

The ATSAMD20J15B-AU is suitable for a low-power monitoring device that must acquire measurements and remain responsive without a high-performance host processor. The 32-bit Cortex-M0+ core, 32 KB flash, and 4 KB SRAM provide enough local resources for sampling sequences, thresholds, logging, and status reporting. ADC operation at either 10-bit or 12-bit resolution lets designers balance measurement granularity against processing and power requirements. The device's 1.6 V minimum operating voltage supports low-voltage designs, while sleep-mode current should be evaluated from the manufacturer datasheet for the final clocking and peripheral configuration.

🌐

Embedded Communication Controller

The ATSAMD20J15B-AU can act as a dedicated communication controller in compact embedded equipment. The 48 MHz Cortex-M0+ core supports protocol state machines, data framing, timeout handling, and interrupt servicing, while 4 KB of SRAM provides space for transient receive and transmit buffers. Firmware and configuration data fit within the 32 KB flash capacity for focused applications. Communication peripheral assignments must be selected from the exact pin-multiplexing options rather than assumed by peripheral count. The 64-TQFP package provides exposed-pad access for heat dissipation in continuously active control equipment.

تجویز کردہ پروڈکٹس کا خلاصہ

ATSAMD20J15B-AUT Microchip Technology استعمال ہوتا ہے: Home Automation Controller, Industrial Sensor Node, Low-Power Monitoring Device ATSAMD20J18B-AU SAM D20 family option for additional code space استعمال ہوتا ہے: Home Automation Controller, Consumer Appliance Controller ATSAMD20J20B-AU Higher-memory SAM D20 controller for expanded metering firmware استعمال ہوتا ہے: Utility Metering Module, Low-Power Monitoring Device, Embedded Communication Controller ATSAMD20J19B-AU Same-package family option for additional data storage استعمال ہوتا ہے: Utility Metering Module, Consumer Appliance Controller ATSAMD20J21B-AU Higher-memory option for more elaborate local processing استعمال ہوتا ہے: Industrial Sensor Node, Embedded Communication Controller
What is ATSAMD20J15B-AU?
The ATSAMD20J15B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from Microchip Technology. According to the manufacturer ATSAMD20J15 product information, it operates up to 48 MHz, integrates 32 KB of flash and 4 KB of SRAM, and provides 10-bit and 12-bit ADC capability. The device is packaged in a 64-lead TQFP with an exposed pad measuring 10 mm by 10 mm.
What is the operating voltage of ATSAMD20J15B-AU?
The ATSAMD20J15B-AU operates from 1.6 V to 3.6 V. This voltage range permits the microcontroller to operate directly with common 3.3 V embedded peripherals while supporting lower-voltage power-saving states where the application allows it. According to the Microchip ATSAMD20J15 product information, the device is intended for compact home-automation, consumer, metering, and industrial-control systems.
How much flash and SRAM does ATSAMD20J15B-AU have?
The ATSAMD20J15B-AU contains 32 KB of flash memory and 4 KB of SRAM. Flash stores the executable firmware and nonvolatile configuration data, while SRAM provides volatile working memory for the stack, variables, buffers, and peripheral state. According to the Microchip ATSAMD20J15 product page, this combination supports compact control firmware without requiring external program or data memory.
What peripherals are built into ATSAMD20J15B-AU?
The ATSAMD20J15B-AU includes 10-bit and 12-bit ADC capability and is designed for embedded control and mixed-signal sensing. The manufacturer product information specifically identifies both converter resolutions, while the complete UART, SPI, I2C, timer, interrupt, and GPIO configuration depends on the exact pin multiplexing. Use the ATSAMD20J15 pin-description tables to assign these peripherals to package pins.
Where can I download the ATSAMD20J15B-AU datasheet and pinout?
The ATSAMD20J15B-AU datasheet, package drawing, and pinout are available from the Microchip ATSAMD20J15 product page linked on this page. The device uses a 64-lead TQFP package with an exposed pad. When assigning signals, consult the pin-description table and exposed-pad land-pattern drawing rather than inferring pins from a generic 64-pin package diagram.
Where can I buy ATSAMD20J15B-AU online?
The ATSAMD20J15B-AU can be requested through the Request a Quote form on this page for current commercial availability, lot conditions, and order handling. The manufacturer also describes the part as factory programmable. Request a quote when the order must be supplied in a specific tray quantity, programmed configuration, or regional packaging arrangement.
What is the price of ATSAMD20J15B-AU?
Current commercial pricing for ATSAMD20J15B-AU should be obtained through the Request a Quote form on this page because quantities, availability, and programmed-order conditions can change. The form is the appropriate route for a current quotation and supply confirmation. Avoid using an unverified historical unit price as a procurement commitment or as a substitute for a formal quote.
What is the lead time for ATSAMD20J15B-AU?
The current lead time for ATSAMD20J15B-AU should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the device as factory programmable, and its listing states that a full tray is available with an estimated shipment date, but individual orders may differ by quantity and configuration. Confirm the promised shipment date in the quotation.
Is ATSAMD20J15B-AU in stock?
ATSAMD20J15B-AU is shown as available for order, including a factory-programmable listing that specifies a full-tray quantity. Actual stock can change after the listing is captured, so use the Request a Quote form on this page to obtain current availability, reserved quantity, and expected dispatch timing for the required order.
ATSAMD20J15B-AU vs ATSAMD20J15B-MU: which package should I choose?
Choose ATSAMD20J15B-AU when the board requires the 64-TQFP exposed-pad package measuring 10 mm by 10 mm. The ATSAMD20J15B-MU uses a 64-VQFN package measuring 9 mm by 9 mm, so it is not pin-to-pin drop-in compatible with the TQFP footprint. Although both belong to the same SAM D20 family, a PCB footprint change is required between these package options.
Can ATSAMD20J15B-AUT replace ATSAMD20J15B-AU?
The ATSAMD20J15B-AUT is the same ATSAMD20J15B device with a tape-and-reel shipping option rather than the tray-oriented -AU order code. It can therefore serve as a procurement and assembly alternative when the electrical device, firmware, and package are unchanged. Check the reel configuration and exposed-pad requirements before accepting the -AUT as the production order code.
When should I choose ATSAMD20J15B-AU over another SAM D20 variant?
Choose ATSAMD20J15B-AU when the design specifically requires 32 KB of flash, 4 KB of SRAM, operation up to 48 MHz, and a 64-TQFP exposed-pad footprint. A same-family device with more flash may be preferable when code size exceeds 32 KB, while a smaller package may simplify placement but require PCB changes. Select from the variant whose memory capacity, package, and supported peripherals match the final design.
Is ATSAMD20J15B-AU suitable for industrial and metering applications?
The ATSAMD20J15B-AU is suitable for many industrial-control, metering, and low-power embedded applications because it combines a 48 MHz Cortex-M0+ core, 32 KB of flash, 4 KB of SRAM, and 10-bit and 12-bit ADC capability in one package. The -AU code designates industrial-temperature operation. Final suitability depends on the complete peripheral set, temperature range, and system-level timing requirements.
What can replace ATSAMD20J15B-AU on an existing PCB?
A replacement must use the same 64-TQFP exposed-pad footprint and maintain compatible peripheral assignments. The ATSAMD20J15B-AUT is the closest ordering option for the same electrical device because it changes the shipping format rather than the package. Other SAM D20 devices may differ in flash capacity, package dimensions, or pin availability, so verify the manufacturer datasheet before treating any alternative as a true drop-in replacement.
What are the key specifications of ATSAMD20J15B-AU that engineers should know?
The essential ATSAMD20J15B-AU specifications are a 32-bit ARM Cortex-M0+ core, 48 MHz maximum operating frequency, 32 KB of flash, 4 KB of SRAM, a 1.6 V to 3.6 V supply range, and 10-bit and 12-bit ADC capability. It uses a 64-TQFP exposed-pad package measuring 10 mm by 10 mm and is identified as an industrial-temperature, green-finish, RoHS 3-compliant device.

کے لیے انجینئرنگ ریفرنس ڈیٹا ATSAMD20J15B-AU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose ATSAMD20J15B-AU when the design requires a 48 MHz ARM Cortex-M0+ controller with exactly 32 KB of flash and 4 KB of SRAM in a 64-TQFP exposed-pad package. It is a strong fit for compact home-automation, consumer-appliance, metering, sensor-node, and industrial-control products using a 1.6 V to 3.6 V supply. Select ATSAMD20J15B-AUT when the electrical device is unchanged but tape-and-reel assembly is preferred. Consider ATSAMD20J18B-AU, ATSAMD20J19B-AU, ATSAMD20J20B-AU, or ATSAMD20J21B-AU when firmware and data requirements need more memory; verify each device's pin multiplexing and memory configuration before substitution. Do not use ATSAMD20J15B-MU as a board-level drop-in because its 9 mm by 9 mm VQFN package differs from the target's 10 mm by 10 mm TQFP footprint.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ATSAMD20J18B-AU ATSAMD20J19B-AU ATSAMD20J20B-AU ATSAMD20J21B-AU ATSAMD20J15B-AUT
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-TQFP-EP, 10 mm x 10 mm 64-TQFP-EP, 10 mm x 10 mm 64-TQFP-EP, 10 mm x 10 mm 64-TQFP-EP, 10 mm x 10 mm 64-TQFP-EP, 10 mm x 10 mm 64-TQFP-EP, 10 mm x 10 mm
Core 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+ 32-bit ARM Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Shipping Format Tray Tray Tray Tray Tray Tape & Reel

اہم امتیازی خصوصیات

  • Exact same-device option for reel-fed production (بمقابلہATSAMD20J15B-AUT)
  • Matching 48 MHz Cortex-M0+ performance in the same TQFP footprint (بمقابلہATSAMD20J18B-AU)
  • Local flash and SRAM eliminate external memory for compact designs (بمقابلہATSAMD20J19B-AU)

ڈیزائن نوٹس

Construct the exposed-pad land pattern from the manufacturer package drawing rather than treating it as an optional thermal feature. Keep the exposed-pad footprint compatible with the 64-TQFP lead geometry, use the recommended via pattern, and connect the pad to the appropriate ground plane. Because this MCU can operate at 48 MHz, short ground-return paths and a stable supply plane are important for predictable peripheral behavior.

Provide local decoupling exactly as specified in the ATSAMD20J15 power-supply recommendations. Place the principal capacitor and high-frequency bypass capacitors close to their associated supply pins, with short ground connections and a low-impedance ground plane. The accepted supply range is 1.6 V to 3.6 V; include a regulated source capable of supporting the 48 MHz operating mode and the final peripheral load without excessive supply ripple.

Assign pins from the exact ATSAMD20J15B pin-description and multiplexing tables before freezing the PCB. Maintain separation between analog inputs, communication signals, and switching nodes, and route sensitive analog traces away from high-current outputs. Because the device offers both 10-bit and 12-bit ADC modes, use the manufacturer grounding and reference recommendations to minimize conversion error near the board's power-distribution structures.

Do not substitute ATSAMD20J15B-MU for ATSAMD20J15B-AU on an existing board: the former uses a 9 mm by 9 mm VQFN package, while the target uses a 10 mm by 10 mm TQFP package. Also distinguish the -AU and -AUT order codes by assembly format. Verify firmware compatibility, peripheral mapping, memory size, package drawing, and exposed-pad layout together before releasing a production BOM.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The component is identified as RoHS 3 compliant with a green finish. It is an industrial-temperature MCU rather than an AEC-Q100-qualified automotive device. REACH, halogen-free, and conflict-minerals declarations were not identified.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ATSAMD20J15B-AU datasheet ATSAMD20J15B-AU pinout ATSAMD20J15B-AU datasheet pdf ATSAMD20J15B-AU equivalent ATSAMD20J15B-AU replacement ATSAMD20J15B-AU cross reference ATSAMD20J15B-AU vs ATSAMD20J15B-MU ATSAMD20J15B-AU footprint ATSAMD20J15B-AU price ATSAMD20J15B-AU stock Microchip ATSAMD20J15B-AU ATSAMD20J15 48MHz Cortex-M0+ ATSAMD20J15B TQFP-64 pinout ATSAMD20J15 home automation controller ATSAMD20J15B-AU microcontroller

متعلقہ اجزاء اور اصطلاحات

Microchip Technology ATSAMD20J15B-AU ATSAMD20J15 ATSAMD20J18B-AU ATSAMD20J19B-AU ATSAMD20J20B-AU ATSAMD20J21B-AU ATSAMD20J15B-AUT ATSAMD20J15B-MU ARM Cortex-M0+ SAM D20 microcontroller embedded microcontroller flash memory SRAM ADC 10-bit ADC 12-bit ADC TQFP-64 exposed pad surface-mount package home automation industrial control utility metering RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں