Microchip Technology

ATSAML10D15A-MU - 32MHz Low-Power Cortex-M23 MCU

MPN: ATSAML10D15A-MU ✓ সক্রিয়
Less than 25 uA/MHz Id 24-VQFN (4 x 4 mm) Package 32 MHz Speed 32 KB flash Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATSAML10D15A-MU সারাংশ

The Microchip Technology ATSAML10D15A-MU is a 32-bit Arm Cortex-M23 microcontroller operating at up to 32 MHz, with 32 KB of flash memory, 8 KB of SRAM, and a 24-VQFN 4 x 4 mm package. It combines an ultra-low-power architecture with an enhanced peripheral touch controller, advanced analog resources, an ISO7816 smart-card interface, and an event system for responsive embedded designs.

A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one compact component. The ATSAML10D15A-MU belongs to Microchip's SAM L10 family and uses the Arm Cortex-M23 core, placing it within the hierarchy of embedded processor, microcontroller, and low-power semiconductor devices. Its combination of 32 KB flash and 8 KB SRAM is suitable for compact control, sensing, interface, and security-oriented products.

The principal advantage of the SAM L10 family is its low-power behavior. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, helping battery-operated equipment maintain long service intervals. The 32 MHz Cortex-M23 core provides deterministic real-time processing, while the 32 KB flash and 8 KB SRAM provide space for firmware, configuration, calibration data, and working state without requiring external memory in many designs.

Peripheral integration makes the ATSAML10D15A-MU useful beyond basic control. The enhanced peripheral touch controller supports capacitive sensing interfaces, while advanced analog capabilities support sensing and signal-conditioning functions. An ISO7816 smart-card interface adds dedicated support for secure contactless and contact applications. The event system provides a hardware mechanism for routing peripheral events, which can reduce interrupt handling and improve responsiveness in low-power designs.

Typical uses include capacitive touch controls, portable condition-monitoring equipment, smart-card readers, compact sensor nodes, low-power industrial controls, and connected battery-powered products. The compact 4 x 4 mm VQFN package also supports space-constrained PCB designs, although its fine pitch requires careful assembly and adequate exposed-pad thermal management.

When laying out the PCB, follow the manufacturer's pin and land-pattern guidance, place decoupling capacitors close to the supply pins, and maintain the required exposed-pad copper area. Confirm the exact pin functions, operating voltage, analog performance, and programming configuration in the manufacturer datasheet before releasing the PCB or production firmware.

This page consolidates the verified device identity, memory configuration, low-power characteristics, package information, sourcing workflow, replacement considerations, and practical integration guidance. It also identifies which alternate-device details require verification before a same-footprint design change is approved.

এর জন্য ড্রপ-ইন বিকল্প ATSAML10D15A-MU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATSAML10D15A-MU (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Core, Touch Controller, RoHS Status, SRAM.

Microchip Technology
Package: 24-pin VQFN (4x4 mm)
Core: ARM Cortex-M23
Touch Controller: Peripheral Touch Controller (PTC)
এর সাথে তুলনা করুন ATSAML10D15A-MU →
Microchip Technology
Package: 24-VQFN (4x4 mm)
Core: ARM Cortex-M23 (ARMv8-M baseline, with TrustZone-M)
Touch Controller: Peripheral Touch Controller (PTC) - capacitive sensing
এর সাথে তুলনা করুন ATSAML10D15A-MU →
Microchip Technology
Package: 24-VQFN (4x4 mm) with exposed pad
Core: ARM Cortex-M23 (Armv8-M baseline)
Touch Controller: Peripheral Touch Controller (PTC), enhanced
এর সাথে তুলনা করুন ATSAML10D15A-MU →
Microchip Technology
Package: 32-pin VQFN (5x5 mm) with Exposed Pad
Core: ARM Cortex-M23 (Armv8-M Baseline with TrustZone-M)
RoHS Status: Compliant (per Microchip product page)
এর সাথে তুলনা করুন ATSAML10D15A-MU →
Microchip Technology
Package: 24-VQFN (4x4 mm) with exposed thermal pad
Core: ARM Cortex-M23 (ARMv8-M, TrustZone-M)
RoHS Status: Compliant
এর সাথে তুলনা করুন ATSAML10D15A-MU →
Microchip Technology
Package: 24-pin VQFN (4x4 mm) with exposed pad
RoHS Status: Compliant
SRAM: 8 KB
এর সাথে তুলনা করুন ATSAML10D15A-MU →

ATSAML10D16A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 (Armv8-M baseline) · 32-bit RISC, single-cycle I/O · 32 MHz · 64 KB (64K x 8) · 16 KB · 8 KB · 1.62 V to 3.63 V · < 25 uA/MHz

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAML11D15A-MU

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 · 32-bit · 32 MHz · 32 KB · 8 KB · 24-pin VQFN (4x4 mm) with exposed pad · 1.62 V to 3.63 V · -40C to +85C

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAML11D14A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 24-VQFN (4 x 4 mm)
ARM Cortex-M23 (ARMv8-M, TrustZone-M) · 32-bit RISC · 32 MHz · 16 KB (16K x 8) · 8 KB · 1.62 V to 3.63 V · 1.62 V to 3.63 V · 24-VQFN (4x4 mm) with exposed thermal pad

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATSAML10D15A-MU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M23
Maximum CPU Frequency 32 MHz
Instruction Width 32 bit
Program Memory 32 KB flash
Flash Organization 32K x 8
Data Memory 8 KB SRAM
Active Mode Current Less than 25 uA/MHz
Sleep Mode Current Less than 100 nA
Touch Controller Enhanced peripheral touch controller
Analog Features Advanced analog features
Smart-Card Interface ISO7816 smart-card interface
Event System Event system
প্যাকেজ 24-VQFN (4 x 4 mm)
মাউন্টিং টাইপ Surface mount
Maximum Temperature Class 85 °C
Environmental Designation Green
Analog Resolution 10-bit and 12-bit

ATSAML10D15A-MU 24-vqfn (4 x 4 mm) পিন কনফিগারেশন গাইড

ATSAML10D15A-MU (24-vqfn (4 x 4 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATSAML10D15A-MU-এর জন্য 24-vqfn (4 x 4 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATSAML10D15A-MU.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATSAML10D15A-MU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Capacitive Touch Controls, Portable Sensor Nodes, Smart-Card Readers, Industrial Condition Monitoring, Battery-Powered Access Controls, Compact Audio Control.

🧩

Capacitive Touch Controls

The ATSAML10D15A-MU fits compact capacitive touch interfaces because it combines an enhanced peripheral touch controller with a 32 MHz Cortex-M23 core and low-power sleep behavior of less than 100 nA. The controller can manage touch-sensing functions alongside general-purpose control logic, reducing the need for a separate touch IC. Use the pin-description and reference-circuit sections in the manufacturer documentation to select electrodes, routing, guard components, and the required sampling configuration. Its 32 KB flash and 8 KB SRAM are sufficient for debounce logic, gesture handling, indicator control, and a compact user interface. Compared with a larger MCU, the device limits code and memory headroom, but it simplifies the bill of materials and supports battery-powered controls that spend most of their time asleep.

📱

Portable Sensor Nodes

The ATSAML10D15A-MU suits portable environmental and condition-monitoring nodes that periodically sample sensors and then return to sleep. Its active consumption is specified below 25 uA/MHz, while sleep consumption below 100 nA helps reduce standby energy. The 32-bit Cortex-M23 core can execute filtering, threshold logic, and data-packaging routines at up to 32 MHz without requiring a high-performance processor. The 8 KB SRAM provides working space for samples and calculations, while the 32 KB flash accommodates firmware and calibration data. Designers should still account for sensor and regulator consumption, wake interval, and radio duty cycle, since those can dominate the complete system power budget.

🔒

Smart-Card Readers

The ATSAML10D15A-MU is appropriate for smart-card reader designs because its SAM L10 feature set includes an ISO7816 smart-card interface. This dedicated interface allows the microcontroller to manage smart-card communication while the Cortex-M23 core performs protocol handling, command processing, and system coordination. The 24-VQFN package also supports compact reader hardware, although its fine pitch requires assembly capability and careful exposed-pad layout. The device’s low-power sleep specification is valuable in terminals that idle between transactions. Designers should confirm electrical levels, supported ISO7816 operating conditions, peripheral multiplexing, and clock configuration in the manufacturer datasheet before selecting passive components or laying out the card-contact circuitry.

🏭

Industrial Condition Monitoring

The ATSAML10D15A-MU can act as the control and sensing hub in compact industrial condition-monitoring equipment. Its advanced analog resources, 32 MHz processing capability, and event system support measurements, filtering, threshold evaluation, and rapid peripheral coordination. The 32 KB flash and 8 KB SRAM are suitable for embedded algorithms when extensive data logging is handled externally. Low-power operation is particularly useful in wireless or remotely powered monitors, since the microcontroller can remain below the system’s active-energy budget during idle intervals. A robust implementation should verify the analog input range, sampling behavior, supply limits, and ADC performance from the manufacturer documentation. Industrial qualification beyond the stated 85 °C temperature class should not be assumed.

🏠

Battery-Powered Access Controls

The ATSAML10D15A-MU is well matched to compact electronic locks, credential readers, and access-control modules that combine touch sensing with secure communication. The enhanced touch controller can support user-input electrodes, while the ISO7816 interface can serve compatible smart-card functions. The Cortex-M23 core runs at up to 32 MHz for protocol and control tasks, while sleep current below 100 nA helps minimize energy use between user interactions. The limited 8 KB SRAM and 32 KB flash require disciplined firmware sizing, particularly when adding secure boot, logging, or multiple communication protocols. Validate pin multiplexing and startup behavior in the manufacturer documentation, and keep the exposed thermal pad connected to the recommended ground-copper pattern.

🎧

Compact Audio Control

The ATSAML10D15A-MU can coordinate compact audio-control functions such as button handling, status indication, gain-setting logic, or peripheral monitoring. Its event system helps respond to external changes without excessive polling, and its advanced analog capabilities can support signal-level measurement where the specific operating conditions are verified. The 32 MHz core provides ample responsiveness for lightweight control tasks, while low-power modes benefit battery-powered speakers and portable listening devices. The MCU is not itself a high-performance digital audio processor, so its role should remain control-oriented rather than replacing a dedicated audio codec or amplifier. Use the manufacturer’s pin-multiplexing, clock, ADC, and low-power guidance when defining the board and firmware.

What are the key specifications of ATSAML10D15A-MU that engineers should know?
The ATSAML10D15A-MU is a 32-bit Arm Cortex-M23 microcontroller rated up to 32 MHz, with 32 KB of flash memory and 8 KB of SRAM in a 24-VQFN package. According to the Microchip product page, the SAM L10 family consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. It also includes an enhanced peripheral touch controller, advanced analog features, an ISO7816 interface, and an event system.
What is ATSAML10D15A-MU and what is it used for?
The ATSAML10D15A-MU is a low-power 32-bit microcontroller for embedded control, capacitive touch, analog sensing, and secure-interface applications. It uses a 32 MHz Arm Cortex-M23 core and provides 32 KB flash plus 8 KB SRAM. The manufacturer identifies the SAM L10 as its lowest-power Cortex-M23 MCU family, with less than 25 uA/MHz active current and less than 100 nA sleep current.
How much memory does the ATSAML10D15A-MU have?
The ATSAML10D15A-MU contains 32 KB of flash memory and 8 KB of SRAM. The listing describes the flash organization as 32K x 8, matching the exact device identity. This capacity is appropriate for compact embedded firmware, configuration storage, sensor processing, touch-control routines, and secure-interface logic when external memory is unnecessary.
Where can I download the ATSAML10D15A-MU datasheet PDF?
The ATSAML10D15A-MU documentation is available through the official Microchip product page linked on this page and through the Octopart datasheet entry. Use the manufacturer document for authoritative pin assignments, electrical characteristics, memory maps, programming instructions, and package drawings. Review the ordering information to confirm that the 24-VQFN device and its temperature and packing codes match the intended assembly process.
Where is the pinout for ATSAML10D15A-MU?
The ATSAML10D15A-MU pinout is shown in the manufacturer datasheet package and pin-description diagrams. The verified device is a 24-VQFN, 4 x 4 mm package with an exposed thermal pad, so a generic 24-pin footprint must not be substituted without checking the land pattern. Use the pin-description table when assigning power, ground, reset, debug, analog, and communication functions.
Is ATSAML10D15A-MU suitable for battery-powered applications?
The ATSAML10D15A-MU is suitable for battery-powered applications because the SAM L10 family is designed for low-power operation. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. Actual battery life also depends on the enabled peripherals, duty cycle, operating voltage, leakage current, and the energy required for periodic sensor sampling or radio communication.
ATSAML10D15A-MU vs ATSAML10D16A-MU: which is better for firmware-heavy applications?
Choose ATSAML10D16A-MU when memory capacity is the deciding factor because it provides 64 KB of flash and 16 KB of SRAM, compared with 32 KB and 8 KB in ATSAML10D15A-MU. Both devices use the Arm Cortex-M23 architecture and 24-VQFN package family. The larger part is preferable for larger firmware images or more complex buffering, while the target remains suitable for compact control firmware.
ATSAML10D15A-MU vs ATSAML11D15A-MU: which is better for secure applications?
ATSAML11D15A-MU is the stronger choice when Arm TrustZone security is required, because the SAM L11 family adds the security capability associated with that architecture. ATSAML10D15A-MU is better when the design only needs the Cortex-M23 feature set and the SAM L10 family’s low-power characteristics. Both are 32-bit, 24-VQFN-class devices, but firmware, peripheral, and security feature requirements should drive the final selection.
When should I choose ATSAML10D15A-MU over a larger-memory alternative?
Choose ATSAML10D15A-MU when the application fits within 32 KB of flash and 8 KB of SRAM and prioritizes the SAM L10 family’s low-power operation. It is suitable for compact touch controls, sensor nodes, smart-card interfaces, and industrial monitoring products. Select a larger-memory alternative when firmware growth, data buffering, protocol stacks, or future updates would exceed the target’s memory capacity.
What is the best drop-in replacement for ATSAML10D15A-MU?
ATSAML10D16A-MU is the closest verified same-family option because it retains the Arm Cortex-M23 and 24-VQFN configuration while increasing flash from 32 KB to 64 KB and SRAM from 8 KB to 16 KB. ATSAML11D15A-MU can suit designs requiring TrustZone, but security features and peripheral behavior must be reviewed. Confirm the exact pinout, clock setup, programming configuration, and firmware requirements before replacement.
Can ATSAML11D15A-MU replace ATSAML10D15A-MU?
ATSAML11D15A-MU can serve as a 24-VQFN-class replacement candidate, but it is not a source-identical substitution because the SAM L11 family adds security-oriented architecture and may differ in peripheral behavior. Verify the manufacturer pin and memory tables before changing the PCB. Existing SAM L10 firmware should also be retested for startup, peripheral, debug, and TrustZone-related configuration changes.
What can replace ATSAML10D15A-MU in a low-power design?
ATSAML10D16A-MU is the primary same-family replacement candidate because it preserves the Cortex-M23 architecture and 24-VQFN package class while offering 64 KB of flash and 16 KB of SRAM. The memory increase does not alter the physical pin count, but application firmware and electrical settings still require verification. A SAM L11 option is appropriate only when its additional security features are needed and accepted.
Where can I buy ATSAML10D15A-MU online?
Use the Request a Quote form on this page to request ATSAML10D15A-MU pricing, stock, and lead-time confirmation from XAIPART. The exact orderable suffix matters: ATSAML10D15A-MU is listed in a tube package, while other suffix combinations can represent different packing or ordering arrangements. State the required quantity, assembly format, and destination country when submitting the request.
What is the price of ATSAML10D15A-MU?
Current ATSAML10D15A-MU pricing is available through the Request a Quote form on this page because the commercial quote process is used for this exact orderable MPN. Submit the required quantity and packaging preference to receive a current unit-price schedule. Confirm that the quoted line item is ATSAML10D15A-MU rather than a related ATSAML10D15A variant with a different suffix.
What is the lead time and stock status for ATSAML10D15A-MU?
Request the current ATSAML10D15A-MU lead time and stock status through the Request a Quote form on this page. The available quantity can vary by the tube packaging and exact suffix, so provide your required quantity, production schedule, and ship-to location. The manufacturer product page and the verified distributor references identify the device, but live order confirmation should come from the quotation process.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATSAML10D15A-MU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ATSAML10D15A-MU when a compact 24-VQFN design needs a 32 MHz Cortex-M23 core, 32 KB flash, 8 KB SRAM, touch sensing, and an ISO7816 interface without paying for a larger memory tier. ATSAML10D16A-MU is the preferred same-family choice when firmware growth or buffering requires 64 KB flash and 16 KB SRAM. Select ATSAML11D15A-MU when the added SAM L11 security architecture and TrustZone capability justify a firmware and peripheral review. ATSAML11D14A-MU is appropriate only when 16 KB flash is sufficient and its lower memory reserve can be accepted. For every alternative, confirm the exact pin multiplexing, clock configuration, peripheral set, exposed-pad layout, and operating conditions in the manufacturer documentation before approving a board change.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATSAML10D16A-MU ATSAML11D15A-MU ATSAML11D14A-MU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm) 24-VQFN (4 x 4 mm)
Processor Architecture Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 with TrustZone-capable SAM L11 architecture Arm Cortex-M23 with TrustZone-capable SAM L11 architecture

মূল পার্থক্যসমূহ

  • Lower-memory SAM L10 option with the full 32 KB flash and 8 KB SRAM configuration (বনামATSAML10D16A-MU)
  • SAM L10 low-power architecture without requiring SAM L11 security features (বনামATSAML11D15A-MU)
  • Twice the flash capacity of the smaller SAM L11 memory option (বনামATSAML11D14A-MU)

ডিজাইন নোট

Use the manufacturer’s 24-VQFN land pattern and exposed-pad guidance rather than a generic QFN footprint. Place the required input and output decoupling capacitors immediately beside their associated supply pins, with short return paths to the ground plane. The 4 x 4 mm package has fine lead pitch, so account for assembly-line capabilities, solder mask definition, paste volume, and the exposed-pad stencil aperture before releasing production artwork.

Plan the power tree around the SAM L10 low-power modes because less than 25 uA/MHz active current and less than 100 nA sleep current describe the microcontroller rather than the complete product. Peripheral leakage, pull resistors, sensors, regulators, and communication circuits can dominate standby consumption. Measure the assembled board in its real operating states and use the device wake-up and timing guidance in the manufacturer documentation when calculating battery-service intervals.

The 24-VQFN package requires thermal-pad layout discipline even when the application is not power-heavy. Provide the manufacturer-recommended exposed-pad copper, connect it to the appropriate ground plane, and avoid placing thermally isolated components or long copper discontinuities beneath the device. Validate the final assembly under maximum expected ambient temperature and operating frequency because package temperature rise depends on the PCB copper area, thermal vias, enclosure, and adjacent heat sources.

Do not select ATSAML10D15A-MU solely from the base device name. The final suffix affects ordering and packaging, with the MU listing shown in a tube. Confirm the temperature class, flash and SRAM configuration, pin functions, exposed-pad requirements, programming method, and boot configuration in the manufacturer ordering guide. Firmware developed for ATSAML10D16A-MU or a SAM L11 alternative should also be revalidated because memory size and security architecture can differ.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is described as Green and rated to an 85 °C temperature class, but formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ATSAML10D15A-MU ATSAML10D15A-MU datasheet ATSAML10D15A-MU datasheet pdf ATSAML10D15A-MU pinout ATSAML10D15A-MU equivalent ATSAML10D15A-MU replacement ATSAML10D15A-MU vs ATSAML10D16A-MU ATSAML10D15A-MU price ATSAML10D15A-MU stock Microchip ATSAML10D15A-MU ATSAML10D15A 32MHz Cortex-M23 ATSAML10D15A 24-VQFN pinout ATSAML10D15A low power application ATSAML10D15A smart card interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATSAML10D15A-MU ATSAML10D16A-MU ATSAML11D15A-MU ATSAML11D14A-MU Arm Cortex-M23 Arm Cortex-M23 core SAM L10 SAM L11 microcontroller embedded processor low-power microcontroller semiconductor 32 KB flash memory 8 KB SRAM enhanced peripheral touch controller advanced analog peripherals ISO7816 smart-card interface event system 24-VQFN package QFN package family surface-mount package active mode sleep mode
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন