ATSAML10D15A-MU - 32MHz Low-Power Cortex-M23 MCU
N.º de pieza: ATSAML10D15A-MU ✓ ActivoATSAML10D15A-MU Descripción general
A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one compact component. The ATSAML10D15A-MU belongs to Microchip's SAM L10 family and uses the Arm Cortex-M23 core, placing it within the hierarchy of embedded processor, microcontroller, and low-power semiconductor devices. Its combination of 32 KB flash and 8 KB SRAM is suitable for compact control, sensing, interface, and security-oriented products.
The principal advantage of the SAM L10 family is its low-power behavior. Microchip specifies less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, helping battery-operated equipment maintain long service intervals. The 32 MHz Cortex-M23 core provides deterministic real-time processing, while the 32 KB flash and 8 KB SRAM provide space for firmware, configuration, calibration data, and working state without requiring external memory in many designs.
Peripheral integration makes the ATSAML10D15A-MU useful beyond basic control. The enhanced peripheral touch controller supports capacitive sensing interfaces, while advanced analog capabilities support sensing and signal-conditioning functions. An ISO7816 smart-card interface adds dedicated support for secure contactless and contact applications. The event system provides a hardware mechanism for routing peripheral events, which can reduce interrupt handling and improve responsiveness in low-power designs.
Typical uses include capacitive touch controls, portable condition-monitoring equipment, smart-card readers, compact sensor nodes, low-power industrial controls, and connected battery-powered products. The compact 4 x 4 mm VQFN package also supports space-constrained PCB designs, although its fine pitch requires careful assembly and adequate exposed-pad thermal management.
When laying out the PCB, follow the manufacturer's pin and land-pattern guidance, place decoupling capacitors close to the supply pins, and maintain the required exposed-pad copper area. Confirm the exact pin functions, operating voltage, analog performance, and programming configuration in the manufacturer datasheet before releasing the PCB or production firmware.
This page consolidates the verified device identity, memory configuration, low-power characteristics, package information, sourcing workflow, replacement considerations, and practical integration guidance. It also identifies which alternate-device details require verification before a same-footprint design change is approved.
Alternativas directas para ATSAML10D15A-MU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATSAML10D15A-MU (mismo factor de forma y huella) — difiere en Package, Core, Touch Controller, RoHS Status, SRAM.
ATSAML10D16A-MU
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ATSAML11D15A-MU
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATSAML11D14A-MU
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ATSAML10D15A-MU Valores máximos y características eléctricas
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M23 |
| Maximum CPU Frequency | 32 MHz |
| Instruction Width | 32 bit |
| Program Memory | 32 KB flash |
| Flash Organization | 32K x 8 |
| Data Memory | 8 KB SRAM |
| Active Mode Current | Less than 25 uA/MHz |
| Sleep Mode Current | Less than 100 nA |
| Touch Controller | Enhanced peripheral touch controller |
| Analog Features | Advanced analog features |
| Smart-Card Interface | ISO7816 smart-card interface |
| Event System | Event system |
| Encapsulado | 24-VQFN (4 x 4 mm) |
| Tipo de montaje | Surface mount |
| Maximum Temperature Class | 85 °C |
| Environmental Designation | Green |
| Analog Resolution | 10-bit and 12-bit |
Guía de configuración de pines de ATSAML10D15A-MU 24-vqfn (4 x 4 mm)
Configuración de pines para ATSAML10D15A-MU (encapsulado 24-vqfn (4 x 4 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATSAML10D15A-MU.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATSAML10D15A-MU es adecuado para 6 aplicacións: Capacitive Touch Controls, Portable Sensor Nodes, Smart-Card Readers, Industrial Condition Monitoring, Battery-Powered Access Controls, Compact Audio Control.
Capacitive Touch Controls
The ATSAML10D15A-MU fits compact capacitive touch interfaces because it combines an enhanced peripheral touch controller with a 32 MHz Cortex-M23 core and low-power sleep behavior of less than 100 nA. The controller can manage touch-sensing functions alongside general-purpose control logic, reducing the need for a separate touch IC. Use the pin-description and reference-circuit sections in the manufacturer documentation to select electrodes, routing, guard components, and the required sampling configuration. Its 32 KB flash and 8 KB SRAM are sufficient for debounce logic, gesture handling, indicator control, and a compact user interface. Compared with a larger MCU, the device limits code and memory headroom, but it simplifies the bill of materials and supports battery-powered controls that spend most of their time asleep.
Recomendado
Portable Sensor Nodes
The ATSAML10D15A-MU suits portable environmental and condition-monitoring nodes that periodically sample sensors and then return to sleep. Its active consumption is specified below 25 uA/MHz, while sleep consumption below 100 nA helps reduce standby energy. The 32-bit Cortex-M23 core can execute filtering, threshold logic, and data-packaging routines at up to 32 MHz without requiring a high-performance processor. The 8 KB SRAM provides working space for samples and calculations, while the 32 KB flash accommodates firmware and calibration data. Designers should still account for sensor and regulator consumption, wake interval, and radio duty cycle, since those can dominate the complete system power budget.
Recomendado
Smart-Card Readers
The ATSAML10D15A-MU is appropriate for smart-card reader designs because its SAM L10 feature set includes an ISO7816 smart-card interface. This dedicated interface allows the microcontroller to manage smart-card communication while the Cortex-M23 core performs protocol handling, command processing, and system coordination. The 24-VQFN package also supports compact reader hardware, although its fine pitch requires assembly capability and careful exposed-pad layout. The device’s low-power sleep specification is valuable in terminals that idle between transactions. Designers should confirm electrical levels, supported ISO7816 operating conditions, peripheral multiplexing, and clock configuration in the manufacturer datasheet before selecting passive components or laying out the card-contact circuitry.
Recomendado
Industrial Condition Monitoring
The ATSAML10D15A-MU can act as the control and sensing hub in compact industrial condition-monitoring equipment. Its advanced analog resources, 32 MHz processing capability, and event system support measurements, filtering, threshold evaluation, and rapid peripheral coordination. The 32 KB flash and 8 KB SRAM are suitable for embedded algorithms when extensive data logging is handled externally. Low-power operation is particularly useful in wireless or remotely powered monitors, since the microcontroller can remain below the system’s active-energy budget during idle intervals. A robust implementation should verify the analog input range, sampling behavior, supply limits, and ADC performance from the manufacturer documentation. Industrial qualification beyond the stated 85 °C temperature class should not be assumed.
Recomendado
Battery-Powered Access Controls
The ATSAML10D15A-MU is well matched to compact electronic locks, credential readers, and access-control modules that combine touch sensing with secure communication. The enhanced touch controller can support user-input electrodes, while the ISO7816 interface can serve compatible smart-card functions. The Cortex-M23 core runs at up to 32 MHz for protocol and control tasks, while sleep current below 100 nA helps minimize energy use between user interactions. The limited 8 KB SRAM and 32 KB flash require disciplined firmware sizing, particularly when adding secure boot, logging, or multiple communication protocols. Validate pin multiplexing and startup behavior in the manufacturer documentation, and keep the exposed thermal pad connected to the recommended ground-copper pattern.
Recomendado
Compact Audio Control
The ATSAML10D15A-MU can coordinate compact audio-control functions such as button handling, status indication, gain-setting logic, or peripheral monitoring. Its event system helps respond to external changes without excessive polling, and its advanced analog capabilities can support signal-level measurement where the specific operating conditions are verified. The 32 MHz core provides ample responsiveness for lightweight control tasks, while low-power modes benefit battery-powered speakers and portable listening devices. The MCU is not itself a high-performance digital audio processor, so its role should remain control-oriented rather than replacing a dedicated audio codec or amplifier. Use the manufacturer’s pin-multiplexing, clock, ADC, and low-power guidance when defining the board and firmware.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATSAML10D15A-MU — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATSAML10D16A-MU | ATSAML11D15A-MU | ATSAML11D14A-MU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) | 24-VQFN (4 x 4 mm) |
| Processor Architecture | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 with TrustZone-capable SAM L11 architecture | Arm Cortex-M23 with TrustZone-capable SAM L11 architecture |
Diferenciadores clave
- Lower-memory SAM L10 option with the full 32 KB flash and 8 KB SRAM configuration (frente a ATSAML10D16A-MU)
- SAM L10 low-power architecture without requiring SAM L11 security features (frente a ATSAML11D15A-MU)
- Twice the flash capacity of the smaller SAM L11 memory option (frente a ATSAML11D14A-MU)
Notas de diseño
Use the manufacturer’s 24-VQFN land pattern and exposed-pad guidance rather than a generic QFN footprint. Place the required input and output decoupling capacitors immediately beside their associated supply pins, with short return paths to the ground plane. The 4 x 4 mm package has fine lead pitch, so account for assembly-line capabilities, solder mask definition, paste volume, and the exposed-pad stencil aperture before releasing production artwork.
Plan the power tree around the SAM L10 low-power modes because less than 25 uA/MHz active current and less than 100 nA sleep current describe the microcontroller rather than the complete product. Peripheral leakage, pull resistors, sensors, regulators, and communication circuits can dominate standby consumption. Measure the assembled board in its real operating states and use the device wake-up and timing guidance in the manufacturer documentation when calculating battery-service intervals.
The 24-VQFN package requires thermal-pad layout discipline even when the application is not power-heavy. Provide the manufacturer-recommended exposed-pad copper, connect it to the appropriate ground plane, and avoid placing thermally isolated components or long copper discontinuities beneath the device. Validate the final assembly under maximum expected ambient temperature and operating frequency because package temperature rise depends on the PCB copper area, thermal vias, enclosure, and adjacent heat sources.
Do not select ATSAML10D15A-MU solely from the base device name. The final suffix affects ordering and packaging, with the MU listing shown in a tube. Confirm the temperature class, flash and SRAM configuration, pin functions, exposed-pad requirements, programming method, and boot configuration in the manufacturer ordering guide. Firmware developed for ATSAML10D16A-MU or a SAM L11 alternative should also be revalidated because memory size and security architecture can differ.
Información de cumplimiento
The device is described as Green and rated to an 85 °C temperature class, but formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer.