Microchip Technology

ATTINY261A-MF - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY261A-MF ✓ সক্রিয়
32-QFN, 5 x 5 mm Package 20 MHz Speed 2 KB (1K x 16) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ATTINY261A-MF সারাংশ

The Microchip Technology ATTINY261A-MF is a high-performance 8-bit AVR RISC-based microcontroller with a 20 MHz maximum clock, 2 KB of Flash memory, 128 bytes of EEPROM, and 128 bytes of SRAM in a 32-QFN 5 x 5 mm package. It provides 16 general-purpose I/O lines and 32 general-purpose working registers for compact embedded control designs.

A microcontroller is an integrated semiconductor device containing a processor core, program memory, data memory, and peripherals on one package. The ATTINY261A belongs to the tinyAVR family, a low-power segment of the AVR 8-bit RISC architecture. Its picoPower design is intended for small, cost-sensitive systems that need deterministic digital control without adopting a larger general-purpose processor.

Key device resources include 2 KB of in-system programmable Flash, 128 bytes of EEPROM, 128 bytes of SRAM, 16 I/O lines, and 32 working registers. The device operates at up to 20 MHz and includes an 8-bit timer/counter with compare modes according to the Microchip ATtiny261A product description. Its 32-QFN package supports compact surface-mount layouts while retaining access to 16 I/O pins.

The 2 KB Flash footprint is suitable for compact firmware containing initialization code, a state machine, periodic control routines, and communication or sensing logic. EEPROM provides 128 bytes of nonvolatile data storage for calibration values, counters, configuration data, or serial numbers. The 128-byte SRAM supports stack space, variables, and working state, so designers should keep RAM allocation and call depth within that limited budget.

Typical uses include compact motor controllers, sensor nodes, small control panels, dimmable lighting modules, and embedded accessories where an 8-bit processor, limited I/O, and low component count are valuable. The QFN package also makes the device appropriate for space-constrained consumer and industrial modules when board area, assembly capability, and thermal performance are carefully considered.

For PCB design, follow the manufacturer’s QFN land pattern and pin-assignment table, place decoupling capacitors close to the supply pins, and keep programming and clock-routing areas free of noisy switching nodes. Programming should use the supported AVR ISP workflow, and unused I/O pins should be configured appropriately rather than left floating.

This page combines manufacturer device information, package and memory characteristics, application guidance, cross-reference findings, and practical design considerations. It also identifies when the original ATtiny261 or related tinyAVR family parts can support a migration without treating functionally related devices as automatic replacements.

এর জন্য ড্রপ-ইন বিকল্প ATTINY261A-MF — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY261A-MF (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, SRAM, Architecture, Product Type, Flash Memory.

Microchip Technology
Package: 32-VQFN (5x5 mm)
SRAM: 128 B
Architecture: AVR enhanced RISC
এর সাথে তুলনা করুন ATTINY261A-MF →
Microchip Technology
Package: 32-VQFN (5 x 5 mm)
SRAM: 256 B
Architecture: 8-bit AVR RISC
এর সাথে তুলনা করুন ATTINY261A-MF →
Microchip Technology
Package: 20-pin PDIP
SRAM: 256 bytes
Architecture: AVR RISC
এর সাথে তুলনা করুন ATTINY261A-MF →
Microchip Technology
Package: 32-VQFN, 5 x 5 mm
SRAM: 512 bytes
Architecture: AVR enhanced RISC
এর সাথে তুলনা করুন ATTINY261A-MF →

ATTINY261A-MFR

✅ ড্রপ-ইন
📦 QFN-32 (5 x 5 mm)
Same ATtiny261A device and 32-QFN footprint; ordering suffix changes production packing, with no indicated change to the 20 MHz clock or memory configuration.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ATTINY261A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 QFN-32 (5 x 5 mm)
8-bit RISC-based AVR microcontroller · 20 MHz · 2 KB Flash (1K x 16) · 128 B · 128 B · 16 · 32 · 8-bit with compare modes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY461A-PU

✅ ড্রপ-ইন
Microchip Technology
📦 QFN-32 (5 x 5 mm)
8-bit AVR RISC-based microcontroller · 20 MHz · 4 KB (2K x 16) · 256 bytes · 256 bytes · 16 lines · 32 registers · 8-bit with compare modes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY861A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 QFN-32 (5 x 5 mm)
8-bit AVR RISC microcontroller · 20 MHz · 8 KB (4K x 16) · 512 bytes · 512 bytes · 16 · 32 · 8-bit with compare modes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY461A-MU

✅ ড্রপ-ইন
Microchip Technology
📦 QFN-32 (5 x 5 mm)
8-bit AVR RISC · 20 MHz · 4 KB (2K x 16) · 256 B · 256 B · 16 lines · 32 · 8-bit with compare modes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

ATTINY261A-MF সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 8-bit RISC microcontroller
Architecture AVR with picoPower technology
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 2 KB (1K x 16)
EEPROM Memory 128 bytes
SRAM 128 bytes
General-Purpose I/O Lines 16 lines
General-Purpose Working Registers 32 registers
Timer/Counter 8-bit timer/counter with compare modes
প্যাকেজ 32-QFN, 5 x 5 mm
মাউন্টিং টাইপ Surface mount
Industrial Temperature Range -40°C to +125°C
Program Memory Type In-system programmable Flash
Green Status Green

ATTINY261A-MF 32-qfn, 5 x 5 mm পিন কনফিগারেশন গাইড

ATTINY261A-MF (32-qfn, 5 x 5 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

ATTINY261A-MF-এর জন্য 32-qfn, 5 x 5 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY261A-MF.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ATTINY261A-MF এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Industrial Sensor Node, Small Motor Controller, Dimmable LED Lighting Module, Embedded Control Panel Interface, Battery-Powered IoT Accessory, Consumer Appliance Auxiliary Controller.

🏭

Compact Industrial Sensor Node

The ATTINY261A-MF fits compact sensor nodes that periodically measure an analog condition, apply filtering, and publish a status or event. Its 16 general-purpose I/O lines leave adequate interface capacity for sensors, indicators, and digital control signals, while the 20 MHz AVR core supports responsive input handling. The device includes 128 bytes of EEPROM for calibration constants and 128 bytes of SRAM for working variables. A typical implementation uses a timer for periodic sampling, serial communication for data transfer, and constrained firmware to remain within the 2 KB Flash limit. Its -40°C to +125°C industrial temperature range supports controlled industrial environments when the complete power and signal chain is also rated appropriately.

⚡

Small Motor Controller

ATTINY261A-MF can manage a small motor-control system built around discrete switching elements, where its 8-bit timer/counter and compare modes simplify timing tasks. The 20 MHz clock permits responsive control-loop execution, and 16 I/O lines can support a control input, direction signals, a fault input, and status indicators. Firmware can implement acceleration profiles, duty-cycle limits, and timeout handling within the available 2 KB Flash. Because SRAM is limited to 128 bytes, the control code should avoid large motion buffers and should track state in compact variables. The 32-QFN package also reduces board area compared with larger leaded microcontroller packages.

💡

Dimmable LED Lighting Module

The ATTINY261A-MF is appropriate for a compact dimmable lighting module that accepts a control command and drives an LED stage through external circuitry. Its timer resources can generate repeatable timing intervals or PWM-related control sequences, while the 16 I/O pins can connect a button, communications input, status LED, and enable signal. The 2 KB Flash capacity supports compact state management, calibration tables, and deliberate flicker-control routines without requiring a large control processor. With only 128 bytes of SRAM, avoid large frame buffers and unnecessary library buffering. Validate LED-current limits and thermal performance in the external driver stage rather than treating the microcontroller pins as the power device.

🔧

Embedded Control Panel Interface

ATTINY261A-MF can serve as the controller for a small user-interface module containing buttons, indicator outputs, and a serial link to a higher-level processor. The 16 I/O lines support multiple inputs and outputs, while 128 bytes of EEPROM can retain configuration such as calibration offsets, device identity, or operating mode. At 20 MHz, the AVR core can debounce controls and refresh indicators efficiently. The compact 32-QFN 5 x 5 mm package is useful where PCB space is constrained. Firmware should remain conservative because the 2 KB Flash and 128-byte SRAM limits favor event-driven code, short routines, and carefully bounded communication buffers.

🧩

Battery-Powered IoT Accessory

The ATTINY261A-MF suits a small battery-powered accessory that wakes periodically, senses its environment, and communicates briefly before returning to a low-power state. The picoPower architecture and compact tinyAVR resource set can help minimize board size in wearable-adjacent or smart-home accessories. Sixteen I/O lines are sufficient for a sensor, a pushbutton, a status indicator, and a low-speed communications interface, while EEPROM preserves a small amount of nonvolatile configuration. Design the sleep and wake paths carefully because 2 KB of Flash and 128 bytes of SRAM constrain the application. Select external sensors and radio modules for low standby consumption, and verify the complete current profile rather than estimating only controller activity.

📱

Consumer Appliance Auxiliary Controller

ATTINY261A-MF can act as an auxiliary controller in a compact consumer appliance where a simple machine handles mode selection, timing, interlock checking, and panel communication. The 20 MHz AVR core supports responsive state-machine updates, and the 8-bit timer/counter can establish operating intervals without relying on software delays. EEPROM can hold small configuration values, although write endurance should be considered for frequently changing records. The 32-QFN package helps minimize board area, but assembly and inspection processes must support its fine-pitch leadless construction. Firmware should include safe default states after reset, validate external interlocks, and keep the program within the 2 KB Flash capacity.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

ATTINY261A-MFR Same device with a reel-oriented ordering suffix ব্যবহৃত হয়: Compact Industrial Sensor Node, Embedded Control Panel Interface, Consumer Appliance Auxiliary Controller ATtiny261 Legacy pin-compatible tinyAVR option ব্যবহৃত হয়: Compact Industrial Sensor Node, Small Motor Controller, Battery-Powered IoT Accessory ATtiny461A Related controller with 4 KB Flash ব্যবহৃত হয়: Small Motor Controller, Dimmable LED Lighting Module, Battery-Powered IoT Accessory ATtiny861A Related tinyAVR device with expanded Flash ব্যবহৃত হয়: Dimmable LED Lighting Module, Consumer Appliance Auxiliary Controller ATTINY461A-MU Microchip Technology ব্যবহৃত হয়: Embedded Control Panel Interface
Where can I download the ATTINY261A-MF datasheet PDF?
The ATTINY261A datasheet can be downloaded from the Microchip ATtiny261A product page, and the manufacturer also publishes a PDF covering the related ATtiny261, ATtiny461, and ATtiny861 family. The device is an 8-bit AVR microcontroller with 2 KB Flash, 128 bytes of EEPROM, 128 bytes of SRAM, 16 I/O lines, and a maximum clock frequency of 20 MHz. Use the manufacturer documentation for electrical limits, programming connections, and package details.
What are the key specifications of ATTINY261A-MF that engineers should know?
The ATTINY261A-MF is a 20 MHz, 8-bit AVR RISC microcontroller with 2 KB Flash, 128 bytes of EEPROM, 128 bytes of SRAM, and 16 general-purpose I/O lines. It is packaged in a 32-QFN 5 x 5 mm surface-mount package and includes a 32-register working-register file. According to the Microchip product description, it also includes an 8-bit timer/counter with compare modes for timing and control tasks.
What is the ATTINY261A-MF pinout and where can I find the 32-QFN pin assignment?
The ATTINY261A-MF uses a 32-QFN 5 x 5 mm package with a bottom-side exposed pad. The complete numbered pin assignment, exposed-pad connection, and recommended PCB land pattern are shown in the Microchip ATtiny261A package drawings and pin-description tables. Use those tables when assigning ports, analog inputs, timer signals, power pins, ground pins, and programming signals to the PCB.
What can replace ATTINY261A-MF with the same 32-QFN footprint?
The closest documented drop-in choices are ATTINY261A-MFR, which uses the same 32-QFN 5 x 5 mm device with a different reel-oriented ordering suffix, and legacy ATtiny261 devices documented as pin and functionally compatible with the ATtiny261A family. The AVR531 migration guide identifies the ATtiny261A/461A/861A family as a functionally identical drop-in replacement for ATtiny261/461/861, subject to reviewing changed electrical characteristics.
Is ATTINY261A-MF the same as ATTINY261A-MFR?
ATTINY261A-MF and ATTINY261A-MFR use the same ATtiny261A device and 32-QFN 5 x 5 mm package, with the ordering suffix distinguishing the supplied packing form. The documented comparison describes them as fully replaceable because their terminal arrangement, package, and principal functional characteristics are consistent. Confirm the manufacturer ordering information for tape orientation, reel format, and assembly handling before changing the procurement suffix.
ATTINY261A-MF vs ATTINY461A-MU: which is better for a compact controller?
Choose ATTINY261A-MF when 2 KB of Flash is sufficient and minimizing memory cost is important. The related ATTINY461A provides more program memory, but its larger memory requirement changes firmware capacity and may change the overall system cost or footprint. Both belong to the pin-compatible tinyAVR family described by Microchip migration documentation. The correct choice depends on code size, SRAM demand, production configuration, and verified package suffix.
When should I choose ATTINY261A-MF over ATTINY261A-MFR?
Choose ATTINY261A-MF when its specified production packing method matches your assembly process, and choose ATTINY261A-MFR when the reel-oriented configuration is preferable for automated feeding. The electrical device and 32-QFN footprint are the same, so selection should focus on packaging logistics, labeling, traceability, and approved supplier inventory rather than firmware compatibility. Confirm the ordering table before releasing a purchase order.
Is ATTINY261A-MF suitable for industrial sensor and control nodes?
ATTINY261A-MF is suitable for compact control and sensing nodes when firmware fits within 2 KB of Flash and working data fits within 128 bytes of SRAM. Its 20 MHz maximum clock, 16 I/O lines, and 8-bit timer/counter support event handling and periodic control functions. The -40°C to +125°C industrial temperature specification supports harsh operating environments, provided the complete power, clock, and peripheral configuration is validated.
What is the best Microchip equivalent for ATTINY261A-MF?
The best documented Microchip-family replacement depends on whether the priority is identical ordering, legacy migration, or expanded Flash. ATTINY261A-MFR provides the same ATtiny261A device and package, while ATtiny261 and the larger-memory ATtiny461A and ATtiny861A devices are documented within the pin-compatible tinyAVR family. Review memory use, electrical differences, package code, and qualification requirements before approving a migration.
What is the best cross-brand drop-in replacement for ATTINY261A-MF?
No cross-brand drop-in replacement is established for ATTINY261A-MF. The verified cross-reference results identify Microchip’s related tinyAVR devices but do not establish a competing manufacturer with the same 32-QFN pinout, 20 MHz operation, memory organization, and peripheral behavior. A cross-brand substitute would therefore require schematic, timing, programming-tool, and electromagnetic compatibility validation rather than being treated as a no-change replacement.
How much Flash and SRAM does ATTINY261A-MF have?
ATTINY261A-MF provides 2 KB of in-system programmable Flash, 128 bytes of EEPROM, and 128 bytes of SRAM. The 2 KB Flash region stores executable firmware, while EEPROM can retain calibration or configuration data when needed. Because SRAM is only 128 bytes, application design should control stack depth, buffer sizes, and library overhead. Check the final linked image and map file to verify that both Flash and SRAM remain within device limits.
Where can I buy ATTINY261A-MF and check its current lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ATTINY261A-MF. Commercial terms can vary by production allocation, package suffix, order quantity, and fulfillment method. Provide the required quantity and target delivery date so the quote can be matched to the exact ordered-device MPN.
Is ATTINY261A-MF in stock for immediate shipment?
Current inventory for ATTINY261A-MF should be confirmed through the Request a Quote form on this page. Stock status can change with production planning, allocation, and order size, so a listing marked as orderable is not a permanent inventory guarantee. Submit the required quantity, assembly packing preference, and destination for a current availability response.
What is the lead time and MOQ for ATTINY261A-MF?
Request the current lead time and minimum order quantity for ATTINY261A-MF using the Request a Quote form on this page. Lead time may vary with device availability, order volume, and whether the requested ATTINY261A-MF packing configuration is active. Providing a forecast quantity and required delivery date helps the purchasing response reflect realistic production planning.
How do I program ATTINY261A-MF, and what tool compatibility should I check?
Program ATTINY261A-MF through the supported AVR in-system programming workflow and confirm the ISP clock, connector pinout, target voltage, and fuse settings in the Microchip ATtiny261A documentation. The device belongs to the AVR family, so an AVR-compatible toolchain and programmer are appropriate. A complete design should also preserve access to the programming interface and include recovery or external clock provisions where required.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY261A-MF — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose ATTINY261A-MF for compact embedded-control products where 2 KB of Flash, 128 bytes of SRAM, 16 I/O lines, and a 20 MHz clock are sufficient and the specified 32-QFN production packing method fits your assembly operation. Choose ATTINY261A-MFR when the alternative production packing configuration better matches automated component feeding. Choose ATtiny261 for legacy-compatible maintenance when Microchip migration guidance has been reviewed and changed electrical characteristics are acceptable. Choose ATtiny461A or ATTINY461A-MU when the firmware link map exceeds 2 KB but the board should retain the pin-compatible tinyAVR footprint. Choose ATtiny861A when substantially more program memory is needed. No verified cross-brand drop-in candidate was established, so a competing MCU should be treated as a redesign rather than a direct replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ATTINY261A-MFR ATtiny261 ATtiny461A ATtiny861A ATTINY461A-MU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package QFN-32 (5 x 5 mm) QFN-32 (5 x 5 mm) QFN-32 (5 x 5 mm) QFN-32 (5 x 5 mm) QFN-32 (5 x 5 mm) QFN-32 (5 x 5 mm)
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 2 KB 2 KB 2 KB 4 KB 8 KB 4 KB
Programming Architecture AVR RISC, picoPower AVR RISC, picoPower AVR RISC AVR RISC, picoPower AVR RISC, picoPower AVR RISC, picoPower

মূল পার্থক্যসমূহ

  • Exact same-device ordering option (বনামATTINY261A-MFR)
  • Direct migration path within the legacy tinyAVR family (বনামATtiny261)
  • Footprint-compatible expansion path for memory-constrained firmware (বনামATtiny461A)
  • Largest Flash option in the compatible family (বনামATtiny861A)

ডিজাইন নোট

Use the manufacturer’s 32-QFN land pattern and exposed-pad recommendations rather than a generic QFN footprint. Place the supply decoupling capacitor close to the device power pins, connect ground pins and the exposed thermal pad to the appropriate ground plane, and route the ISP interface away from high-current switching nodes. The fine-pitch leadless package also requires assembly capability and inspection rules appropriate for a 5 x 5 mm QFN.

Do not assume that all related tinyAVR devices are interchangeable in every respect. The ATtiny261A/461A/861A family is pin-compatible, but available Flash differs across the family, and migration documentation notes that some electrical characteristics can change between manufacturing generations. Verify the linked Flash size, SRAM allocation, fuse configuration, clock setup, and electrical limits in the Microchip documentation before approving a substitute.

Estimated firmware memory use: a 2 KB Flash device provides 2048 bytes of program storage before accounting for the boot section, vector table, and reserved bootloader area. Check the final linker map because the usable application space is lower than the nominal device total. Also budget the 128-byte SRAM carefully, including stack, global variables, and library allocations; reduce buffering or choose ATtiny461A or ATtiny861A if the linked image exceeds the target capacity.

Keep the oscillator circuit and ISP programming nets short, and provide test access for clock, reset, and programming signals. If the design uses an external clock or crystal, follow the source and load requirements stated for the selected operating mode. Avoid routing sensitive timing or measurement signals beneath noisy power-stage footprints, and assign unused I/O pins to defined firmware states rather than allowing floating inputs.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The product is described as green in the component listing, but detailed RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated. The related manufacturer family PDF mentions ISO-TS 16949 development and manufacturing requirements, but that statement alone is not treated as an AEC-Q100 qualification for ATTINY261A-MF.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

attiny261a datasheet attiny261a pinout attiny261a su datasheet ATTINY261A-MF datasheet pdf ATTINY261A-MF datasheet ATTINY261A-MF pinout ATTINY261A-MF equivalent ATTINY261A-MF replacement ATTINY261A-MF vs ATTINY261A-MFR Microchip ATTINY261A-MF ATTINY261A-MF 32-QFN footprint ATTINY261A-MF application circuit ATTINY261A-MF price ATTINY261A-MF stock ATTINY261A-MF cross reference

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology ATTINY261A-MF ATTINY261A-MFR ATtiny261 ATtiny461A ATtiny861A ATTINY461A-MU ATtiny261A AVR tinyAVR 8-bit RISC microcontroller picoPower 32-QFN QFN package family surface-mount package in-system programming Flash memory EEPROM SRAM timer/counter industrial temperature range sensor node motor controller LED lighting module
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন