DG412AK - Quad 30Ω SPST Analog Switch | Analog Devices
MPN: DG412AK ✓ সক্রিয়DG412AK সারাংশ
An analog switch is an integrated semiconductor that connects or disconnects a signal path under digital control. The DG412 belongs to the analog switch hierarchy, which falls within interface ICs and broader semiconductor signal-routing systems. Unlike a mechanical relay, it operates without moving contacts and can support compact signal conditioning, test, measurement, communication, and control circuits.
The DG412 family provides four independent SPST switches. The manufacturer's product page identifies low on-resistance matching between channels of 3 Ω maximum and guaranteed on-resistance flatness of Δ4 Ω maximum across the signal range. These characteristics help minimize channel-to-channel variation and signal-level distortion when the same source drives multiple destinations. Distributor listings identify DG412AK as a 16-CERDIP, through-hole device with a nominal 30 Ω or 35 Ω on-resistance listing depending on the manufacturer catalog.
The AK package suffix identifies the military temperature-grade version in a hermetically sealed ceramic package. Its four separately controlled switches allow a system to isolate, select, or disconnect external circuits without using four separate relay packages. The 16-pin through-hole format also supports prototype boards, legacy industrial equipment, and repair assemblies where a surface-mount package would be unsuitable.
Typical uses include signal-routing modules, test equipment, data-acquisition interfaces, communications equipment, instrumentation, and industrial control systems. Because the switch is normally open, each signal path remains disconnected until its corresponding control input is asserted, helping prevent unintended signal propagation between circuits.
When designing around the DG412AK, verify signal amplitude, control logic levels, and switch behavior at the actual operating voltage before finalizing the board. Keep sensitive signal paths short, provide a stable ground reference, and include protection against transient voltages when the switched lines connect to external cables or connectors.
This product page consolidates the manufacturer family information, package details, search-driven technical queries, and practical application guidance into a design-oriented reference. It also distinguishes the verified DG412AK characteristics from unresolved pin-level and electrical details that should be confirmed in the manufacturer datasheet before layout release.
এর জন্য ড্রপ-ইন বিকল্প DG412AK — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনDG412AK সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Quad SPST CMOS analog switch |
| Number of Channels | 4 circuits |
| Switch Configuration | 1:1 SPST |
| Number of Independent Switches | 4 |
| On-Resistance | 30 ohm |
| Alternate Catalog On-Resistance | 35 ohm |
| On-Resistance Matching Between Switches | 3 ohm maximum |
| On-Resistance Flatness | Delta 4 ohm maximum |
| প্যাকেজ | 16-pin CERDIP |
| Package Type | Ceramic dual in-line through-hole |
| Number of Terminals | 16 |
| মাউন্টিং স্টাইল | Through hole |
| Carrier Type | Tube |
| Temperature Grade | Military |
| Production Status | Production |
DG412AK ceramic dual in-line through-hole পিন কনফিগারেশন গাইড
DG412AK (ceramic dual in-line through-hole প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DG412AK.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
DG412AK এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Signal Routing, Test and Measurement Systems, Data Acquisition Interfaces, Communications Equipment, Instrumentation and Sensor Conditioning, Legacy Equipment Repair.
Industrial Signal Routing
The DG412AK fits industrial signal-routing modules that must connect several analog or control lines under software command. Its four independent SPST channels allow each destination to be enabled separately, while the 3 Ω maximum matching and Δ4 Ω maximum flatness help limit channel-dependent signal variation. The normally open topology also prevents a route from conducting until its control input is asserted. The 16-pin CERDIP package is particularly useful in rugged through-hole control boards where larger assembly components and long service life are preferred over minimum board area.
সুপারিশকৃত
Test and Measurement Systems
The DG412AK is useful in test fixtures and measurement interfaces that require controllable connection and isolation of four signal paths. Matching of up to 3 Ω between switches and on-resistance flatness of Δ4 Ω maximum help preserve channel consistency when identical routing paths are compared. Because the switch is normally open, it can isolate an input while another path is active. Designers should still confirm off-isolation, leakage, bandwidth, and operating-voltage limits in the manufacturer data sheet before setting precision measurement ranges.
সুপারিশকৃত
Data Acquisition Interfaces
The DG412AK can serve as a routing element in data-acquisition front ends where several sensor or conditioning paths must be selected independently. Four SPST channels provide compact control over signal access without using four separate single-switch packages. Matching between switches of 3 Ω maximum reduces route-to-route resistance variation, which can help when identical channels feed subsequent conversion electronics. High-impedance sources require careful assessment of leakage and capacitance because the published catalog information does not establish suitability for every source impedance or sampling speed.
সুপারিশকৃত
Communications Equipment
The DG412AK is applicable to communications equipment that needs local routing, isolation, or line-path disconnection under digital control. Its four independent normally open channels can support transmit, receive, monitoring, or test paths when their signal levels remain within the device's electrical limits. The ceramic 16-pin through-hole package suits modular line cards and legacy-style communication assemblies requiring rugged component construction. Signal-integrity work should account for switch capacitance, bandwidth, off-isolation, and crosstalk, all of which must be read from the DG412 family documentation.
সুপারিশকৃত
Instrumentation and Sensor Conditioning
The DG412AK can control multiple analog paths in instrumentation and sensor-conditioning modules where inputs must be connected or isolated according to operating mode. The family's low channel-to-channel resistance matching helps maintain more consistent transfer paths than unmatched discrete switching arrangements. Its four channels also reduce the number of packages required for a multi-range or multi-source instrument. Keep high-impedance sensor traces short, provide a low-impedance ground reference, and verify leakage and injection-current specifications before connecting sensitive transducers directly to the switched nodes.
সুপারিশকৃত
Legacy Equipment Repair
The DG412AK is a practical fit for repairing or extending legacy equipment that uses a 16-pin ceramic DIP footprint and four-channel SPST routing. Its through-hole format is easier to inspect and replace than a fine-pitch surface-mount package, while the military-grade designation supports use in established military and industrial assemblies when the specified limits are met. Confirm pin numbering, control polarity, and channel functions against the relevant manufacturer documentation before installation, because ceramic DIP packages must not be interchanged with generic molded DIP pinouts without verification.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DG412AK — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
Do not choose it for a compact surface-mount design without redesigning the PCB and verifying an electrically equivalent alternative. DG412CUE+ is mechanically smaller but cannot replace DG412AK directly because its TSSOP-16 footprint is incompatible with the CERDIP package. No verified drop-in substitute with the same 16-pin CERDIP pin assignment was found. If exact pin compatibility is mandatory, qualify the DG412AK itself or obtain manufacturer-approved sourcing rather than substituting a family member or surface-mount option based only on channel count.
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 16-pin CERDIP |
| Brand | Analog Devices |
| Number of Channels | 4 circuits |
| Switch Configuration | 1:1 SPST |
| On-Resistance | 30 ohm |
| Alternate Catalog On-Resistance | 35 ohm |
| On-Resistance Matching | 3 ohm maximum |
| On-Resistance Flatness | Delta 4 ohm maximum |
| Temperature Grade | Military |
মূল পার্থক্যসমূহ
- Four independent normally open channels (বনামSingle-channel SPST switches)
- Controlled channel matching (বনামUnmatched discrete SPST switches)
- Defined on-resistance flatness (বনামSwitches without a guaranteed flatness limit)
- Military-grade ceramic construction (বনামDG412CUE+)
ডিজাইন নোট
Use the ceramic package drawing rather than a generic 16-pin DIP footprint when defining plated holes, solder-paste geometry, and keep-out areas. Although the body width is similar to some molded DIP packages, ceramic packages can have different lead dimensions, tolerances, and thermal characteristics. Confirm pin-1 orientation, package height, and lead spacing against the DG412 family documentation before releasing artwork.
Treat switched nodes as transmission paths even when the signal is low frequency. Route the switch, source, and destination connections together, keep sensitive traces short, and maintain a continuous ground reference to reduce coupling and return-path discontinuities. Before finalizing high-impedance or fast-edge systems, verify bandwidth, off-isolation, capacitance, and crosstalk in the manufacturer data sheet because those parameters were not resolved for this product page.
Do not assign control inputs or channel outputs from a generic 16-pin DIP drawing. The AK package is a ceramic, military-grade DG412 variant, and its control polarity and exact pin functions must be confirmed in the manufacturer pin-description table. Also avoid assuming that a 30 ohm or 35 ohm catalog value guarantees a specific resistance at every signal voltage; use the maximum-rated conditions and matching limits for design calculations.
The published records do not establish a complete power-dissipation rating or thermal resistance for the CERDIP package. Estimate conduction losses from the actual on-state voltage, current, and resistance, then apply the appropriate package thermal data from the manufacturer documentation. Keep the device within its rated operating-temperature range and provide normal through-hole airflow when installed in a sealed legacy assembly.
কমপ্লায়েন্স তথ্য
The manufacturer identifies the DG412 family as production and the AK suffix as military grade, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited records.