Analog Devices

DG412AK - Quad 30Ω SPST Analog Switch | Analog Devices

MPN: DG412AK ✓ 啟用中
30 ohm Rds(on) 16-pin CERDIP Package
MOQ: 1 |

DG412AK 概覽

Analog Devices DG412AK is a quad, single-pole single-throw CMOS analog switch with four independent channels, a 30 Ω on-resistance listing, and a 16-pin CERDIP package. The device is produced for industrial and military-grade applications and is suitable for routing low-frequency analog or digital signals when independent control of four signal paths is required.

An analog switch is an integrated semiconductor that connects or disconnects a signal path under digital control. The DG412 belongs to the analog switch hierarchy, which falls within interface ICs and broader semiconductor signal-routing systems. Unlike a mechanical relay, it operates without moving contacts and can support compact signal conditioning, test, measurement, communication, and control circuits.

The DG412 family provides four independent SPST switches. The manufacturer's product page identifies low on-resistance matching between channels of 3 Ω maximum and guaranteed on-resistance flatness of Δ4 Ω maximum across the signal range. These characteristics help minimize channel-to-channel variation and signal-level distortion when the same source drives multiple destinations. Distributor listings identify DG412AK as a 16-CERDIP, through-hole device with a nominal 30 Ω or 35 Ω on-resistance listing depending on the manufacturer catalog.

The AK package suffix identifies the military temperature-grade version in a hermetically sealed ceramic package. Its four separately controlled switches allow a system to isolate, select, or disconnect external circuits without using four separate relay packages. The 16-pin through-hole format also supports prototype boards, legacy industrial equipment, and repair assemblies where a surface-mount package would be unsuitable.

Typical uses include signal-routing modules, test equipment, data-acquisition interfaces, communications equipment, instrumentation, and industrial control systems. Because the switch is normally open, each signal path remains disconnected until its corresponding control input is asserted, helping prevent unintended signal propagation between circuits.

When designing around the DG412AK, verify signal amplitude, control logic levels, and switch behavior at the actual operating voltage before finalizing the board. Keep sensitive signal paths short, provide a stable ground reference, and include protection against transient voltages when the switched lines connect to external cables or connectors.

This product page consolidates the manufacturer family information, package details, search-driven technical queries, and practical application guidance into a design-oriented reference. It also distinguishes the verified DG412AK characteristics from unresolved pin-level and electrical details that should be confirmed in the manufacturer datasheet before layout release.

直接替換替代品,適用於 DG412AK — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

DG412AK 最大額定值與電氣特性

Product Type Quad SPST CMOS analog switch
Number of Channels 4 circuits
Switch Configuration 1:1 SPST
Number of Independent Switches 4
On-Resistance 30 ohm
Alternate Catalog On-Resistance 35 ohm
On-Resistance Matching Between Switches 3 ohm maximum
On-Resistance Flatness Delta 4 ohm maximum
封裝 16-pin CERDIP
Package Type Ceramic dual in-line through-hole
Number of Terminals 16
安裝方式 Through hole
Carrier Type Tube
Temperature Grade Military
Production Status Production

DG412AK ceramic dual in-line through-hole 腳位配置指南

DG412AK(ceramic dual in-line through-hole 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

DG412AK 的 ceramic dual in-line through-hole 封裝腳位圖

無詳細腳位定義資料: DG412AK.

請參閱 資料表 以查看完整腳位配置。

典型應用

DG412AK 適用於 6 應用s: Industrial Signal Routing, Test and Measurement Systems, Data Acquisition Interfaces, Communications Equipment, Instrumentation and Sensor Conditioning, Legacy Equipment Repair.

🏭

Industrial Signal Routing

The DG412AK fits industrial signal-routing modules that must connect several analog or control lines under software command. Its four independent SPST channels allow each destination to be enabled separately, while the 3 Ω maximum matching and Δ4 Ω maximum flatness help limit channel-dependent signal variation. The normally open topology also prevents a route from conducting until its control input is asserted. The 16-pin CERDIP package is particularly useful in rugged through-hole control boards where larger assembly components and long service life are preferred over minimum board area.

🔧

Test and Measurement Systems

The DG412AK is useful in test fixtures and measurement interfaces that require controllable connection and isolation of four signal paths. Matching of up to 3 Ω between switches and on-resistance flatness of Δ4 Ω maximum help preserve channel consistency when identical routing paths are compared. Because the switch is normally open, it can isolate an input while another path is active. Designers should still confirm off-isolation, leakage, bandwidth, and operating-voltage limits in the manufacturer data sheet before setting precision measurement ranges.

📊

Data Acquisition Interfaces

The DG412AK can serve as a routing element in data-acquisition front ends where several sensor or conditioning paths must be selected independently. Four SPST channels provide compact control over signal access without using four separate single-switch packages. Matching between switches of 3 Ω maximum reduces route-to-route resistance variation, which can help when identical channels feed subsequent conversion electronics. High-impedance sources require careful assessment of leakage and capacitance because the published catalog information does not establish suitability for every source impedance or sampling speed.

🌐

Communications Equipment

The DG412AK is applicable to communications equipment that needs local routing, isolation, or line-path disconnection under digital control. Its four independent normally open channels can support transmit, receive, monitoring, or test paths when their signal levels remain within the device's electrical limits. The ceramic 16-pin through-hole package suits modular line cards and legacy-style communication assemblies requiring rugged component construction. Signal-integrity work should account for switch capacitance, bandwidth, off-isolation, and crosstalk, all of which must be read from the DG412 family documentation.

📡

Instrumentation and Sensor Conditioning

The DG412AK can control multiple analog paths in instrumentation and sensor-conditioning modules where inputs must be connected or isolated according to operating mode. The family's low channel-to-channel resistance matching helps maintain more consistent transfer paths than unmatched discrete switching arrangements. Its four channels also reduce the number of packages required for a multi-range or multi-source instrument. Keep high-impedance sensor traces short, provide a low-impedance ground reference, and verify leakage and injection-current specifications before connecting sensitive transducers directly to the switched nodes.

🔧

Legacy Equipment Repair

The DG412AK is a practical fit for repairing or extending legacy equipment that uses a 16-pin ceramic DIP footprint and four-channel SPST routing. Its through-hole format is easier to inspect and replace than a fine-pitch surface-mount package, while the military-grade designation supports use in established military and industrial assemblies when the specified limits are met. Confirm pin numbering, control polarity, and channel functions against the relevant manufacturer documentation before installation, because ceramic DIP packages must not be interchanged with generic molded DIP pinouts without verification.

What is the DG412AK?
The DG412AK is a quad SPST CMOS analog switch with four independently controlled normally open channels in a 16-pin CERDIP package. According to the Analog Devices DG412 product page, the DG412 family provides on-resistance matching between switches of 3 Ω maximum and on-resistance flatness of Δ4 Ω maximum. It is intended for compact analog-signal routing, isolation, test, measurement, and industrial control systems.
How many switches are in the DG412AK?
The DG412AK contains four independent single-pole single-throw switches. Each channel has its own control input, allowing four signal paths to be connected or disconnected independently rather than operating as one multi-pole device. The manufacturer identifies the DG412 as a quad SPST analog switch, while distributor records identify the DG412AK as a four-circuit, 16-CERDIP component.
What package does the DG412AK use?
The DG412AK uses a 16-pin CERDIP package with a through-hole mounting style. Distributor records describe the exact DG412AK as a 16-CERDIP, and a product listing identifies the carrier as a tube. Use the manufacturer pin-description table and package drawing when assigning PCB holes and pin functions; the ceramic package should be treated as a distinct mechanical footprint rather than a generic 16-pin plastic DIP.
What is the on-resistance of the DG412AK?
The DG412AK is listed with a 30 Ω on-resistance by Analog Devices distributor records and 35 Ω in another manufacturer catalog entry, indicating a maximum-rated catalog condition rather than a guaranteed resistance of one exact value. According to the Analog Devices DG412 family page, matching between switches is 3 Ω maximum and on-resistance flatness is Δ4 Ω maximum across the signal range.
Where can I download the DG412AK datasheet PDF?
The official DG412 product page at Analog Devices is the preferred starting point for the family datasheet and supporting documentation. The DG412AK is the military-grade, 16-pin CERDIP member of that family. Open the Data Sheet resource on the product page, then verify the AK ordering suffix, pin assignment, electrical limits, and ceramic-package drawing before releasing a design.
Where can I find the DG412AK pinout?
The DG412AK pinout should be taken from the pin-description table in the Analog Devices DG412 manufacturer datasheet, because no public pin table appears in the search results used for this page. The device has 16 terminals in a CERDIP package, but channel and control functions must not be assigned from a generic 16-pin DIP diagram. Use the ceramic package drawing and pin table together during PCB layout.
Is the DG412AK suitable for industrial control systems?
Yes, the DG412AK is suitable for industrial and military-grade signal-routing designs when its electrical limits match the application. It provides four independent normally open SPST channels in a 16-pin ceramic through-hole package. The manufacturer lists the DG412 family as production, and the military temperature grade makes it appropriate for harsh environments when the complete operating-temperature and supply-voltage limits are satisfied.
What can replace the DG412AK?
No verified drop-in replacement for the DG412AK was identified in the available manufacturer and cross-reference search results. A valid replacement must provide four independent SPST channels, the same 16-pin CERDIP pin assignment, compatible control logic, and acceptable on-resistance, leakage, bandwidth, temperature, and supply-voltage ratings. Do not substitute a 16-pin TSSOP or surface-mount switch because its footprint and pin functions are not interchangeable.
Is there a Vishay equivalent for the DG412AK?
A Vishay Siliconix listing exists for the exact DG412AK ordering code, but it is not a different MPN and therefore is not a cross-brand replacement. The search result identifies the Vishay catalog entry as a 4-circuit, 1:1, 35 Ω, 16-CERDIP device. Confirm the authoritative manufacturer of ownership, trace codes, and documentation for the particular lot before using it in a regulated or military supply chain.
DG412AK versus DG412CUE+ - which should I choose?
Choose DG412AK when a through-hole 16-pin CERDIP package and military-grade construction are required; choose DG412CUE+ when a surface-mount TSSOP-16 footprint is preferred. A published comparison identifies mounting style and package as the major differences. These devices are not direct drop-in alternatives because a TSSOP-16 land pattern is mechanically and electrically incompatible with a CERDIP footprint.
When should I choose the DG412AK over a surface-mount analog switch?
Choose the DG412AK over a surface-mount analog switch when through-hole construction, ceramic packaging, and military-grade availability are more important than board area. Its 16-pin CERDIP footprint requires larger through-holes and is less compact than TSSOP or other surface-mount options. For dense, automated, or handheld equipment, a verified surface-mount alternative is generally more appropriate despite the footprint change.
Is DG412AK suitable for signal isolation in test equipment?
Yes, the DG412AK can provide signal isolation because each SPST channel remains open until controlled. The family's 3 Ω maximum on-resistance matching and Δ4 Ω maximum flatness help reduce channel-dependent signal variation in test paths. Verify switch leakage, off-isolation, bandwidth, and signal-level limits against the datasheet before using it for precision measurement, especially at high impedance.
Where can I buy the DG412AK and check its lead time?
Use the Request a Quote form on this page to request current DG412AK availability, lead time, minimum order quantity, and pricing. The verified distributor records show active catalog listings, but they do not provide a uniform quantity-break price table or a guaranteed stock commitment. The manufacturer product page identifies the DG412 family as production, which is useful context but does not establish allocation for a specific order.
What is the price of the DG412AK?
Current DG412AK pricing should be requested through the Request a Quote form on this page because the available catalog records do not show complete, comparable quantity-break prices for the exact 16-pin CERDIP MPN. The Analog Devices family page shows a starting list price for the DG412 product family, but that family-level value is not a valid quotation for DG412AK and is therefore not treated as an exact part price.
How does the DG412AK compare with DG411 and DG413?
DG412AK is the quad SPST member of the DG411, DG412, and DG413 analog-switch family, with four independent normally open channels. According to the Analog Devices product page, all three families were redesigned for improved on-resistance matching and flatness. The comparison tables in the manufacturer datasheet should be used to select among their contact and logic configurations rather than assuming every family member has identical switching behavior.

工程參考資料,適用於 DG412AK — 比較、設計指引及合規資訊。

選型指南

Choose the DG412AK when the design needs four independent, normally open SPST channels and the board can accommodate a 16-pin through-hole CERDIP footprint. It is particularly appropriate for military-grade, rugged, industrial, instrumentation, test, and legacy-repair applications where component traceability and ceramic construction matter. The manufacturer's 3 Ω maximum matching and Δ4 Ω maximum on-resistance flatness specifications are useful when channel consistency is important.

Do not choose it for a compact surface-mount design without redesigning the PCB and verifying an electrically equivalent alternative. DG412CUE+ is mechanically smaller but cannot replace DG412AK directly because its TSSOP-16 footprint is incompatible with the CERDIP package. No verified drop-in substitute with the same 16-pin CERDIP pin assignment was found. If exact pin compatibility is mandatory, qualify the DG412AK itself or obtain manufacturer-approved sourcing rather than substituting a family member or surface-mount option based only on channel count.

與替代品比較

參數 本產品
Package 16-pin CERDIP
Brand Analog Devices
Number of Channels 4 circuits
Switch Configuration 1:1 SPST
On-Resistance 30 ohm
Alternate Catalog On-Resistance 35 ohm
On-Resistance Matching 3 ohm maximum
On-Resistance Flatness Delta 4 ohm maximum
Temperature Grade Military

主要差異化特點

  • Four independent normally open channels (對比Single-channel SPST switches)
  • Controlled channel matching (對比Unmatched discrete SPST switches)
  • Defined on-resistance flatness (對比Switches without a guaranteed flatness limit)
  • Military-grade ceramic construction (對比DG412CUE+)

設計說明

Use the ceramic package drawing rather than a generic 16-pin DIP footprint when defining plated holes, solder-paste geometry, and keep-out areas. Although the body width is similar to some molded DIP packages, ceramic packages can have different lead dimensions, tolerances, and thermal characteristics. Confirm pin-1 orientation, package height, and lead spacing against the DG412 family documentation before releasing artwork.

Treat switched nodes as transmission paths even when the signal is low frequency. Route the switch, source, and destination connections together, keep sensitive traces short, and maintain a continuous ground reference to reduce coupling and return-path discontinuities. Before finalizing high-impedance or fast-edge systems, verify bandwidth, off-isolation, capacitance, and crosstalk in the manufacturer data sheet because those parameters were not resolved for this product page.

Do not assign control inputs or channel outputs from a generic 16-pin DIP drawing. The AK package is a ceramic, military-grade DG412 variant, and its control polarity and exact pin functions must be confirmed in the manufacturer pin-description table. Also avoid assuming that a 30 ohm or 35 ohm catalog value guarantees a specific resistance at every signal voltage; use the maximum-rated conditions and matching limits for design calculations.

The published records do not establish a complete power-dissipation rating or thermal resistance for the CERDIP package. Estimate conduction losses from the actual on-state voltage, current, and resistance, then apply the appropriate package thermal data from the manufacturer documentation. Keep the device within its rated operating-temperature range and provide normal through-hole airflow when installed in a sealed legacy assembly.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer identifies the DG412 family as production and the AK suffix as military grade, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited records.

相關搜尋

DG412AK datasheet DG412AK datasheet pdf DG412AK pinout DG412AK 16 pin cerdip DG412AK analog switch specifications DG412AK on resistance DG412AK equivalent DG412AK replacement DG412AK drop-in substitute DG412AK vs DG412CUE+ Analog Devices DG412AK DG412AK price DG412AK stock and lead time where to buy DG412AK

相關元件與詞彙

Analog Devices DG412AK DG412 DG411 DG413 DG412CUE+ quad SPST analog switch analog switch interface IC CMOS semiconductor normally open switch single-pole single-throw on-resistance on-resistance matching on-resistance flatness off-isolation channel-to-channel crosstalk 16-pin CERDIP ceramic dual in-line package through-hole mounting military temperature grade industrial signal routing test and measurement data acquisition interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情