DS90CF383AMTD - 65MHz 24-Bit LVDS Transmitter | TI
MPN: DS90CF383AMTD ✓ সক্রিয়DS90CF383AMTD সারাংশ
A flat-panel-display transmitter is an interface IC that converts parallel digital pixels into a low-voltage differential signaling link suitable for transmission between a graphics controller and a display. In the product hierarchy, the DS90CF383AMTD belongs to the LVDS interface family, which forms part of display interface ICs and broader digital signal-processing semiconductors. Its differential outputs reduce signal-integrity and EMI challenges compared with single-ended parallel routing over longer cable or cable-like interconnects.
The principal device features include four LVDS data outputs, one differential clock output, a 3 V to 3.6 V supply range, and support for a 65 MHz transmit clock. Every transmit-clock cycle samples 28 input bits, allowing 24 RGB data bits and three control bits to be transferred. The programmable architecture supports configured flat-panel interfaces while maintaining a fixed parallel input side and standardized LVDS output side.
Technically, the transmitter combines a parallel CMOS/TTL input interface with a phase-locked clocking and differential-output architecture. The clock is transmitted in parallel with the pixel data so the receiving endpoint can recover a timing reference from the same physical link. Four data lanes each carry seven transmitted bits in the described operating format, while the separate clock lane supports synchronization across the complete display word.
Typical applications include digital flat-panel monitors, industrial human-machine-interface panels, point-of-sale displays, medical imaging terminals, automotive navigation displays, and other graphics systems that transmit 24-bit RGB data over an LVDS FPD-Link connection. The device is most appropriate where the transmitter endpoint operates from 3.3 V and the receiving endpoint supports the corresponding LVDS clock and data interface.
PCB implementation requires careful treatment of the 56-pin TSSOP and its differential outputs. Place power-supply decoupling capacitors close to the supply pins, maintain continuous reference planes beneath the device, and route each differential pair as a tightly coupled pair over a controlled impedance path. Decoupling and clock-quality evaluation should be performed on the assembled PCB because package parasitics and trace geometry affect signal integrity.
This product page combines the manufacturer’s device description with practical application guidance, interface-selection context, and a traceable comparison framework. It focuses on the DS90CF383AMTD’s verified architecture and package characteristics rather than introducing functionally similar parts that have not been established as pin-to-pin drop-in replacements.
এর জন্য ড্রপ-ইন বিকল্প DS90CF383AMTD — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible DS90CF383AMTD (একই form factor এবং footprint) — পার্থক্য রয়েছে Number of Drivers/Receivers, Package, Protocol.
DS90CF383A
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
DS90CF383
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
DS90C383AMTD
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →DS90CF383AMTD বিশেষণ
| Product Type | Programmable LVDS flat-panel-display transmitter |
| Supply Voltage Range | 3 V to 3.6 V |
| Transmit Clock Frequency | 65 MHz maximum |
| CMOS/TTL Input Width | 28 bits |
| RGB Data Width | 24 bits |
| LVDS Data Outputs | 4 differential outputs |
| LVDS Clock Outputs | 1 differential output |
| Number of Drivers/Receivers | 28 drivers and 4 receivers |
| Protocol | FPD-Link and LVDS |
| Transmitter Architecture | Programmable |
| Clock Architecture | Phase-locked transmit clock |
| প্যাকেজ | 56-pin TSSOP |
| Package Width | 6.10 mm |
| Package Height | 0.240 mm lead pitch |
| Packaging | Tube |
DS90CF383AMTD 0.240 mm lead pitch পিন কনফিগারেশন গাইড
DS90CF383AMTD (0.240 mm lead pitch প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি DS90CF383AMTD.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
DS90CF383AMTD এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Desktop Flat-Panel Monitor, Industrial HMI Panel, Point-of-Sale Terminal, Medical Imaging Display, Automotive Navigation Display, Embedded LCD Controller Board.
Desktop Flat-Panel Monitor
The DS90CF383AMTD fits a desktop flat-panel monitor because it accepts a 28-bit parallel RGB and control input and converts it into four differential LVDS data streams at a maximum transmit-clock frequency of 65 MHz. The separate differential clock link allows the receiving LCD controller or scaler to recover the transmitted timing reference. A typical implementation places the transmitter beside the graphics-source interface and routes controlled-impedance LVDS pairs to the panel input circuitry.
সুপারিশকৃত
Industrial HMI Panel
An industrial human-machine-interface panel can use the DS90CF383AMTD when the controller board operates at 3.3 V and the display accepts a 65 MHz FPD-Link signal. The device transfers 24 RGB bits and three additional control bits each transmit-clock cycle while transmitting the phase-locked clock over a separate differential link. This architecture reduces parallel routing distance and supports a cleaner interface between a graphics engine and a remote or integrated flat-panel display.
সুপারিশকৃত
Point-of-Sale Terminal
Point-of-sale terminals often place a display controller and LCD panel on separate boards, making LVDS preferable to a long parallel bus. The DS90CF383AMTD provides four differential data outputs and one clock output for a 65 MHz maximum link, carrying the complete 28-bit input word per cycle. In this application, keep the differential pairs short and matched, provide local 3.3 V decoupling, and confirm that the panel receiver supports the same transmitted data mapping.
সুপারিশকৃত
Medical Imaging Display
The DS90CF383AMTD can support the display-link stage of a medical imaging terminal when the system already uses a compatible 3.3 V receiver and validated pixel timing. Its 65 MHz maximum clock, 24-bit RGB payload, three control bits, and separate transmitted clock provide a defined path for synchronizing image data. Signal-integrity testing should evaluate eye quality, clock jitter margin, and connector or PCB-channel loss rather than assuming that a nominal 65 MHz clock guarantees display-image integrity.
সুপারিশকৃত
Automotive Navigation Display
The DS90CF383AMTD suits a 3.3 V navigation-display link when the source controller and LCD receiver share the required FPD-Link format. Differential LVDS data and clock outputs help control common-mode noise and support reliable transfer across a compact harness or controlled PCB route. Automotive deployment requires additional qualification of the chosen device variant, operating-temperature range, EMC performance, and the complete display subsystem against the vehicle’s environmental requirements.
সুপারিশকৃত
Embedded LCD Controller Board
An embedded LCD controller board can use the DS90CF383AMTD to bridge a parallel graphics engine to a differential panel interface. The transmitter samples 28 CMOS/TTL bits on each transmit-clock cycle and serializes the payload across four LVDS data lanes, with the phase-locked clock delivered over a fifth link. Place the device near the panel connector or cable interface, keep power and ground planes continuous, and verify connector pin mapping against both transmitter and receiver datasheets.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা DS90CF383AMTD — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Product Type | Programmable LVDS flat-panel-display transmitter |
| Brand | Texas Instruments |
| Package | 56-pin TSSOP |
| Supply Voltage Range | 3 V to 3.6 V |
| Maximum Transmit Clock | 65 MHz |
| Parallel Input Width | 28 bits |
| RGB Data Width | 24 bits |
| LVDS Data Outputs | 4 differential outputs |
| Clock Output | 1 differential phase-locked transmit-clock output |
| Protocol | FPD-Link and LVDS |
| Packaging | Tube |
মূল পার্থক্যসমূহ
- Dedicated 24-bit display transmitter architecture (বনামDS90C387VJD-TI)
- Integrated phase-locked clock transmission (বনামGeneral-purpose parallel display interface)
- Fixed high-speed display-channel allocation (বনামMultipurpose interface controller)
ডিজাইন নোট
Place the 3.3 V supply and ground decoupling capacitors adjacent to the transmitter’s supply terminals, with the shortest possible return path through a continuous ground plane. Treat the four LVDS data pairs and the clock pair as controlled-impedance differential routes. Keep the pairs tightly coupled, match their geometry, and avoid discontinuities such as test pads, vias, or abrupt width changes immediately beneath the device.
Evaluate the complete transmitter-to-receiver channel rather than only the source outputs. At the documented 65 MHz maximum transmit-clock frequency, confirm differential impedance, pair-length balance, clock jitter margin, receiver input thresholds, and the resulting eye diagram. The separate clock link must reach the receiving endpoint with adequate amplitude and timing margin, because clock degradation can impair decoding even when the data-eye test appears acceptable.
Do not interpret the four LVDS data outputs as four complete video links. Together they serialize the 28-bit input word, and the separate differential clock output supplies the timing reference. Verify RGB bit order, the three control-bit assignments, receiver mapping, and connector polarity before power-up. Incorrect data mapping can produce corrupted pixels even when supply voltage, clock frequency, and differential amplitude are correct.
কমপ্লায়েন্স তথ্য
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the technical records for this exact MPN.