Texas Instruments

DS90CF383AMTD - 65MHz 24-Bit LVDS Transmitter | TI

MPN: DS90CF383AMTD ✓ Hoạt động
3 V to 3.6 V Vdss 56-pin TSSOP Package 65 MHz maximum Speed
MOQ: 1 |

DS90CF383AMTD Tóm tắt

Texas Instruments DS90CF383AMTD is a 3.3 V programmable LVDS transmitter for 24-bit flat panel display links, operating at a maximum transmit clock frequency of 65 MHz and packaged in a 56-pin TSSOP. It accepts 28 CMOS/TTL data bits and converts them into four differential LVDS data streams, while a fifth differential link carries the phase-locked transmit clock.

A flat-panel-display transmitter is an interface IC that converts parallel digital pixels into a low-voltage differential signaling link suitable for transmission between a graphics controller and a display. In the product hierarchy, the DS90CF383AMTD belongs to the LVDS interface family, which forms part of display interface ICs and broader digital signal-processing semiconductors. Its differential outputs reduce signal-integrity and EMI challenges compared with single-ended parallel routing over longer cable or cable-like interconnects.

The principal device features include four LVDS data outputs, one differential clock output, a 3 V to 3.6 V supply range, and support for a 65 MHz transmit clock. Every transmit-clock cycle samples 28 input bits, allowing 24 RGB data bits and three control bits to be transferred. The programmable architecture supports configured flat-panel interfaces while maintaining a fixed parallel input side and standardized LVDS output side.

Technically, the transmitter combines a parallel CMOS/TTL input interface with a phase-locked clocking and differential-output architecture. The clock is transmitted in parallel with the pixel data so the receiving endpoint can recover a timing reference from the same physical link. Four data lanes each carry seven transmitted bits in the described operating format, while the separate clock lane supports synchronization across the complete display word.

Typical applications include digital flat-panel monitors, industrial human-machine-interface panels, point-of-sale displays, medical imaging terminals, automotive navigation displays, and other graphics systems that transmit 24-bit RGB data over an LVDS FPD-Link connection. The device is most appropriate where the transmitter endpoint operates from 3.3 V and the receiving endpoint supports the corresponding LVDS clock and data interface.

PCB implementation requires careful treatment of the 56-pin TSSOP and its differential outputs. Place power-supply decoupling capacitors close to the supply pins, maintain continuous reference planes beneath the device, and route each differential pair as a tightly coupled pair over a controlled impedance path. Decoupling and clock-quality evaluation should be performed on the assembled PCB because package parasitics and trace geometry affect signal integrity.

This product page combines the manufacturer’s device description with practical application guidance, interface-selection context, and a traceable comparison framework. It focuses on the DS90CF383AMTD’s verified architecture and package characteristics rather than introducing functionally similar parts that have not been established as pin-to-pin drop-in replacements.

Bộ thay thế dễ dàng lắp đặt cho DS90CF383AMTD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DS90CF383AMTD (cùng hình factor và footprint) — khác nhau ở Number of Drivers/Receivers, Package, Protocol.

Texas Instruments
Number of Drivers/Receivers: 1/1
Package: 56-pin TSSOP (0.240, 6.10 mm width)
Protocol: FPD-Link
So sánh với DS90CF383AMTD →

DS90CF383A

✅ Drop-In
📦 56-TSSOP
Family-level orderable designation; the 65 MHz, 24-bit FPD-Link electrical ratings match, while the exact package suffix and lead-free status must be confirmed

📋 Tham chiếu thay thế (không có trong danh mục)

DS90CF383

✅ Drop-In
📦 56-TSSOP
Base family designation with the same 65 MHz FPD-Link function; the exact orderable suffix and mechanical configuration must be confirmed before substitution

📋 Tham chiếu thay thế (không có trong danh mục)

DS90C383AMTD

✅ Drop-In
Texas Instruments
📦 56-TSSOP
Programmable LVDS transmitter/receiver · FPD-Link · 1/1 · 3 V to 3.6 V · 3.3 V · 24 bits · 65 MHz · LVDS

Liên hệ để biết giá

Xem tài liệu →

DS90CF383AMTD Thông số kỹ thuật

Product Type Programmable LVDS flat-panel-display transmitter
Supply Voltage Range 3 V to 3.6 V
Transmit Clock Frequency 65 MHz maximum
CMOS/TTL Input Width 28 bits
RGB Data Width 24 bits
LVDS Data Outputs 4 differential outputs
LVDS Clock Outputs 1 differential output
Number of Drivers/Receivers 28 drivers and 4 receivers
Protocol FPD-Link and LVDS
Transmitter Architecture Programmable
Clock Architecture Phase-locked transmit clock
Hộp 56-pin TSSOP
Package Width 6.10 mm
Package Height 0.240 mm lead pitch
Packaging Tube

Hướng dẫn cấu hình chân DS90CF383AMTD 0.240 mm lead pitch

Cấu hình chân cho DS90CF383AMTD (0.240 mm lead pitch gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 0.240 mm lead pitch cho DS90CF383AMTD

Không có dữ liệu chân cụ thể sẵn có cho DS90CF383AMTD.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

DS90CF383AMTD phù hợp cho 6 Áp dụngs: Desktop Flat-Panel Monitor, Industrial HMI Panel, Point-of-Sale Terminal, Medical Imaging Display, Automotive Navigation Display, Embedded LCD Controller Board.

📺

Desktop Flat-Panel Monitor

The DS90CF383AMTD fits a desktop flat-panel monitor because it accepts a 28-bit parallel RGB and control input and converts it into four differential LVDS data streams at a maximum transmit-clock frequency of 65 MHz. The separate differential clock link allows the receiving LCD controller or scaler to recover the transmitted timing reference. A typical implementation places the transmitter beside the graphics-source interface and routes controlled-impedance LVDS pairs to the panel input circuitry.

🏭

Industrial HMI Panel

An industrial human-machine-interface panel can use the DS90CF383AMTD when the controller board operates at 3.3 V and the display accepts a 65 MHz FPD-Link signal. The device transfers 24 RGB bits and three additional control bits each transmit-clock cycle while transmitting the phase-locked clock over a separate differential link. This architecture reduces parallel routing distance and supports a cleaner interface between a graphics engine and a remote or integrated flat-panel display.

🖥️

Point-of-Sale Terminal

Point-of-sale terminals often place a display controller and LCD panel on separate boards, making LVDS preferable to a long parallel bus. The DS90CF383AMTD provides four differential data outputs and one clock output for a 65 MHz maximum link, carrying the complete 28-bit input word per cycle. In this application, keep the differential pairs short and matched, provide local 3.3 V decoupling, and confirm that the panel receiver supports the same transmitted data mapping.

💊

Medical Imaging Display

The DS90CF383AMTD can support the display-link stage of a medical imaging terminal when the system already uses a compatible 3.3 V receiver and validated pixel timing. Its 65 MHz maximum clock, 24-bit RGB payload, three control bits, and separate transmitted clock provide a defined path for synchronizing image data. Signal-integrity testing should evaluate eye quality, clock jitter margin, and connector or PCB-channel loss rather than assuming that a nominal 65 MHz clock guarantees display-image integrity.

🚗

Automotive Navigation Display

The DS90CF383AMTD suits a 3.3 V navigation-display link when the source controller and LCD receiver share the required FPD-Link format. Differential LVDS data and clock outputs help control common-mode noise and support reliable transfer across a compact harness or controlled PCB route. Automotive deployment requires additional qualification of the chosen device variant, operating-temperature range, EMC performance, and the complete display subsystem against the vehicle’s environmental requirements.

🔧

Embedded LCD Controller Board

An embedded LCD controller board can use the DS90CF383AMTD to bridge a parallel graphics engine to a differential panel interface. The transmitter samples 28 CMOS/TTL bits on each transmit-clock cycle and serializes the payload across four LVDS data lanes, with the phase-locked clock delivered over a fifth link. Place the device near the panel connector or cable interface, keep power and ground planes continuous, and verify connector pin mapping against both transmitter and receiver datasheets.

What is the DS90CF383AMTD?
The DS90CF383AMTD is a 3.3 V programmable LVDS transmitter for 24-bit flat-panel-display interfaces. According to the Texas Instruments datasheet, it converts 28 CMOS/TTL input bits into four LVDS data streams and provides a fifth LVDS link for the phase-locked transmit clock. Its maximum transmit-clock frequency is 65 MHz, and the specified package is a 56-pin TSSOP.
How many LVDS outputs does the DS90CF383AMTD provide?
The DS90CF383AMTD provides four differential LVDS data outputs plus one differential clock output. According to the Texas Instruments datasheet, each data stream carries seven bits from the 28-bit parallel input, while the fifth link conveys the phase-locked transmit clock. This five-link arrangement synchronizes transferred pixel and control data across an FPD-Link connection.
What is the operating voltage of DS90CF383AMTD?
The DS90CF383AMTD operates from 3 V to 3.6 V. The Texas Instruments product page and datasheet identify it as a 3.3 V LVDS transmitter, and the component listing specifies the same 3 V to 3.6 V supply range. The power rails and decoupling network must therefore be designed around a nominal 3.3 V system.
Where can I download the DS90CF383AMTD datasheet PDF?
The official DS90CF383AMTD datasheet PDF is available from the Texas Instruments literature server at https://www.ti.com/lit/ds/symlink/ds90cf383.pdf. The manufacturer product page is https://www.ti.com/product/DS90CF383. Use the pin-description table, electrical characteristics, and application diagrams in the datasheet when assigning PCB signals and designing the receiver interface.
Where can I find the DS90CF383AMTD pinout?
The DS90CF383AMTD pinout is identified in the Texas Instruments datasheet, which documents the 56-pin TSSOP device and its parallel input, supply, control, LVDS-data, and clock signals. Because the individual terminal names are not reproduced in this product record, use the pin-description table and package drawing in the official datasheet before assigning tracks or establishing test points.
Where to buy DS90CF383AMTD online?
The DS90CF383AMTD can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current quotation, stock confirmation, minimum-order quantity, and lead-time questions. The device is identified in the 56-pin TSSOP package and uses tube packaging according to its component record.
What is the price of DS90CF383AMTD?
Current pricing for the DS90CF383AMTD should be obtained through the Request a Quote form on this page. The form allows quantity, packaging, and delivery requirements to be stated before a quotation is prepared. The Texas Instruments device is a 3.3 V, 65 MHz, 24-bit FPD-Link LVDS transmitter in a 56-pin TSSOP package.
What is the lead time for DS90CF383AMTD?
The current lead time for DS90CF383AMTD should be confirmed through the Request a Quote form on this page. State the required quantity, tube packaging, shipment destination, and production schedule in the request. The documented configuration is a 65 MHz 24-bit programmable LVDS transmitter in a 56-pin TSSOP package.
Is DS90CF383AMTD in stock?
Current inventory status for DS90CF383AMTD should be confirmed through the Request a Quote form on this page. Include the required quantity and whether tube packaging is acceptable for the production plan. The manufacturer documentation identifies a 3.3 V supply range, 65 MHz maximum clock frequency, and 56-pin TSSOP configuration.
What are the key specifications of DS90CF383AMTD that engineers should know?
The key DS90CF383AMTD specifications are a 3 V to 3.6 V supply, 65 MHz maximum transmit-clock frequency, 28-bit CMOS/TTL input, four LVDS data outputs, and one differential clock output. According to the Texas Instruments datasheet, the transmitter also carries 24 RGB bits plus three control bits per clock cycle. It is packaged in a 56-pin TSSOP.
When should I choose DS90CF383AMTD for a display interface?
Choose the DS90CF383AMTD when the graphics source uses a 28-bit CMOS/TTL interface and the display receiver expects a 24-bit FPD-Link LVDS connection. Its four data lanes and separate clock lane support synchronized transmission at up to 65 MHz. It is especially suitable for compact 3.3 V display equipment requiring a dedicated transmitter rather than a multipurpose interface controller.
Is DS90CF383AMTD suitable for an industrial display?
The DS90CF383AMTD is suitable for an industrial display when the system uses a compatible 3.3 V LVDS receiver and the required 24-bit data format is supported. Its 65 MHz maximum transmit-clock rate and separate phase-locked clock output fit digital panel links used in industrial HMI equipment. Confirm timing, setup requirements, temperature limits, and receiver compatibility during design validation.
What is the best drop-in replacement for DS90CF383AMTD?
No verified drop-in replacement for the DS90CF383AMTD was established from the available manufacturer and cross-reference information. A replacement must use the same 56-pin TSSOP footprint, provide compatible 28-bit parallel inputs, four LVDS data outputs, one clock output, and equivalent 65 MHz operation. Do not select a substitute solely from a generic interface or display-controller category.
Can DS90C387VJD-TI replace DS90CF383AMTD?
No. The DS90C387VJD-TI belongs to the LVDS receiver side of an interface link, whereas the DS90CF383AMTD is the transmitter that converts 28 CMOS/TTL bits into differential LVDS outputs. These devices have complementary signal-direction roles and are not pin-to-pin drop-in equivalents. The transmitter requires a compatible receiver, but the receiver cannot directly replace it.
What is the best Texas Instruments equivalent for DS90CF383AMTD?
No distinct Texas Instruments drop-in equivalent was established for the DS90CF383AMTD. The available manufacturer information identifies the DS90CF383 family, but it does not document another orderable MPN with the same 56-pin pinout, 28-bit input, four LVDS data outputs, and separate clock output. Treat the original MPN as the reference point and request manufacturer confirmation for any proposed substitution.

Dữ liệu tham khảo kỹ thuật cho DS90CF383AMTD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the DS90CF383AMTD when a 3.3 V graphics source must drive a compatible 24-bit FPD-Link display receiver at up to 65 MHz. It is a transmitter, so select it for the source side of the link and pair it with a receiver that supports the same data mapping, clocking method, and timing requirements. The device is preferable to a general-purpose interface controller when a fixed four-data-lane LVDS architecture, a separate differential clock link, and a 56-pin TSSOP implementation simplify the display subsystem. Do not treat a receiver such as DS90C387VJD-TI as a substitute: it fulfills the opposite signal-direction role. No separate orderable MPN was established as a true pin-to-pin replacement, so any redesign should begin with the original DS90CF383AMTD datasheet, verify the receiver’s requirements, and confirm any proposed alternative with the manufacturer before schematic release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Product Type Programmable LVDS flat-panel-display transmitter
Brand Texas Instruments
Package 56-pin TSSOP
Supply Voltage Range 3 V to 3.6 V
Maximum Transmit Clock 65 MHz
Parallel Input Width 28 bits
RGB Data Width 24 bits
LVDS Data Outputs 4 differential outputs
Clock Output 1 differential phase-locked transmit-clock output
Protocol FPD-Link and LVDS
Packaging Tube

Bảo phân biệt quan trọng

  • Dedicated 24-bit display transmitter architecture (vsDS90C387VJD-TI)
  • Integrated phase-locked clock transmission (vsGeneral-purpose parallel display interface)
  • Fixed high-speed display-channel allocation (vsMultipurpose interface controller)

Ghi chú thiết kế

Place the 3.3 V supply and ground decoupling capacitors adjacent to the transmitter’s supply terminals, with the shortest possible return path through a continuous ground plane. Treat the four LVDS data pairs and the clock pair as controlled-impedance differential routes. Keep the pairs tightly coupled, match their geometry, and avoid discontinuities such as test pads, vias, or abrupt width changes immediately beneath the device.

Evaluate the complete transmitter-to-receiver channel rather than only the source outputs. At the documented 65 MHz maximum transmit-clock frequency, confirm differential impedance, pair-length balance, clock jitter margin, receiver input thresholds, and the resulting eye diagram. The separate clock link must reach the receiving endpoint with adequate amplitude and timing margin, because clock degradation can impair decoding even when the data-eye test appears acceptable.

Do not interpret the four LVDS data outputs as four complete video links. Together they serialize the 28-bit input word, and the separate differential clock output supplies the timing reference. Verify RGB bit order, the three control-bit assignments, receiver mapping, and connector polarity before power-up. Incorrect data mapping can produce corrupted pixels even when supply voltage, clock frequency, and differential amplitude are correct.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the technical records for this exact MPN.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

DS90CF383AMTD datasheet DS90CF383AMTD pinout DS90CF383AMTD datasheet pdf DS90CF383AMTD equivalent DS90CF383AMTD replacement DS90CF383AMTD cross reference DS90CF383AMTD price DS90CF383AMTD stock Texas Instruments DS90CF383AMTD DS90CF383AMTD 56 pin TSSOP DS90CF383AMTD 65MHz LVDS transmitter DS90CF383AMTD flat panel display interface DS90CF383AMTD application circuit DS90CF383AMTD vs DS90C387VJD-TI

Các bộ phận và thuật ngữ liên quan

Texas Instruments DS90CF383AMTD DS90C383A DS90C387VJD-TI DS90CR213MTD DS90CF562MTD LVDS FPD-Link Low Voltage Differential Signaling flat-panel-display transmitter LVDS interface IC video interface IC digital signal-processing semiconductor CMOS TTL phase-locked transmit clock differential output 24-bit RGB data 28-bit parallel input 65 MHz transmit clock 3.3 V power supply TSSOP surface-mount package digital flat-panel display industrial HMI medical imaging display automotive navigation display signal integrity differential impedance
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ