DS90CF383AMTD - 65MHz 24-Bit LVDS Transmitter | TI
Артикул: DS90CF383AMTD ✓ АктивенDS90CF383AMTD Обзор
A flat-panel-display transmitter is an interface IC that converts parallel digital pixels into a low-voltage differential signaling link suitable for transmission between a graphics controller and a display. In the product hierarchy, the DS90CF383AMTD belongs to the LVDS interface family, which forms part of display interface ICs and broader digital signal-processing semiconductors. Its differential outputs reduce signal-integrity and EMI challenges compared with single-ended parallel routing over longer cable or cable-like interconnects.
The principal device features include four LVDS data outputs, one differential clock output, a 3 V to 3.6 V supply range, and support for a 65 MHz transmit clock. Every transmit-clock cycle samples 28 input bits, allowing 24 RGB data bits and three control bits to be transferred. The programmable architecture supports configured flat-panel interfaces while maintaining a fixed parallel input side and standardized LVDS output side.
Technically, the transmitter combines a parallel CMOS/TTL input interface with a phase-locked clocking and differential-output architecture. The clock is transmitted in parallel with the pixel data so the receiving endpoint can recover a timing reference from the same physical link. Four data lanes each carry seven transmitted bits in the described operating format, while the separate clock lane supports synchronization across the complete display word.
Typical applications include digital flat-panel monitors, industrial human-machine-interface panels, point-of-sale displays, medical imaging terminals, automotive navigation displays, and other graphics systems that transmit 24-bit RGB data over an LVDS FPD-Link connection. The device is most appropriate where the transmitter endpoint operates from 3.3 V and the receiving endpoint supports the corresponding LVDS clock and data interface.
PCB implementation requires careful treatment of the 56-pin TSSOP and its differential outputs. Place power-supply decoupling capacitors close to the supply pins, maintain continuous reference planes beneath the device, and route each differential pair as a tightly coupled pair over a controlled impedance path. Decoupling and clock-quality evaluation should be performed on the assembled PCB because package parasitics and trace geometry affect signal integrity.
This product page combines the manufacturer’s device description with practical application guidance, interface-selection context, and a traceable comparison framework. It focuses on the DS90CF383AMTD’s verified architecture and package characteristics rather than introducing functionally similar parts that have not been established as pin-to-pin drop-in replacements.
Аналоги без доработки для DS90CF383AMTD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DS90CF383AMTD (тот же форм-фактор и посадочное место) — отличается по Number of Drivers/Receivers, Package, Protocol.
DS90CF383A
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CF383
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90C383AMTD
✅ Прямая заменаУточнить цену
Открыть даташит →DS90CF383AMTD Характеристики
| Product Type | Programmable LVDS flat-panel-display transmitter |
| Supply Voltage Range | 3 V to 3.6 V |
| Transmit Clock Frequency | 65 MHz maximum |
| CMOS/TTL Input Width | 28 bits |
| RGB Data Width | 24 bits |
| LVDS Data Outputs | 4 differential outputs |
| LVDS Clock Outputs | 1 differential output |
| Number of Drivers/Receivers | 28 drivers and 4 receivers |
| Protocol | FPD-Link and LVDS |
| Transmitter Architecture | Programmable |
| Clock Architecture | Phase-locked transmit clock |
| Корпус | 56-pin TSSOP |
| Package Width | 6.10 mm |
| Package Height | 0.240 mm lead pitch |
| Packaging | Tube |
Руководство по цоколевке DS90CF383AMTD в корпусе 0.240 mm lead pitch
Цоколевка для DS90CF383AMTD (корпус 0.240 mm lead pitch). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для DS90CF383AMTD.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DS90CF383AMTD подходит для 6 применениеs: Desktop Flat-Panel Monitor, Industrial HMI Panel, Point-of-Sale Terminal, Medical Imaging Display, Automotive Navigation Display, Embedded LCD Controller Board.
Desktop Flat-Panel Monitor
The DS90CF383AMTD fits a desktop flat-panel monitor because it accepts a 28-bit parallel RGB and control input and converts it into four differential LVDS data streams at a maximum transmit-clock frequency of 65 MHz. The separate differential clock link allows the receiving LCD controller or scaler to recover the transmitted timing reference. A typical implementation places the transmitter beside the graphics-source interface and routes controlled-impedance LVDS pairs to the panel input circuitry.
Рекомендуется
Industrial HMI Panel
An industrial human-machine-interface panel can use the DS90CF383AMTD when the controller board operates at 3.3 V and the display accepts a 65 MHz FPD-Link signal. The device transfers 24 RGB bits and three additional control bits each transmit-clock cycle while transmitting the phase-locked clock over a separate differential link. This architecture reduces parallel routing distance and supports a cleaner interface between a graphics engine and a remote or integrated flat-panel display.
Рекомендуется
Point-of-Sale Terminal
Point-of-sale terminals often place a display controller and LCD panel on separate boards, making LVDS preferable to a long parallel bus. The DS90CF383AMTD provides four differential data outputs and one clock output for a 65 MHz maximum link, carrying the complete 28-bit input word per cycle. In this application, keep the differential pairs short and matched, provide local 3.3 V decoupling, and confirm that the panel receiver supports the same transmitted data mapping.
Рекомендуется
Medical Imaging Display
The DS90CF383AMTD can support the display-link stage of a medical imaging terminal when the system already uses a compatible 3.3 V receiver and validated pixel timing. Its 65 MHz maximum clock, 24-bit RGB payload, three control bits, and separate transmitted clock provide a defined path for synchronizing image data. Signal-integrity testing should evaluate eye quality, clock jitter margin, and connector or PCB-channel loss rather than assuming that a nominal 65 MHz clock guarantees display-image integrity.
Рекомендуется
Automotive Navigation Display
The DS90CF383AMTD suits a 3.3 V navigation-display link when the source controller and LCD receiver share the required FPD-Link format. Differential LVDS data and clock outputs help control common-mode noise and support reliable transfer across a compact harness or controlled PCB route. Automotive deployment requires additional qualification of the chosen device variant, operating-temperature range, EMC performance, and the complete display subsystem against the vehicle’s environmental requirements.
Рекомендуется
Embedded LCD Controller Board
An embedded LCD controller board can use the DS90CF383AMTD to bridge a parallel graphics engine to a differential panel interface. The transmitter samples 28 CMOS/TTL bits on each transmit-clock cycle and serializes the payload across four LVDS data lanes, with the phase-locked clock delivered over a fifth link. Place the device near the panel connector or cable interface, keep power and ground planes continuous, and verify connector pin mapping against both transmitter and receiver datasheets.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DS90CF383AMTD — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Product Type | Programmable LVDS flat-panel-display transmitter |
| Brand | Texas Instruments |
| Package | 56-pin TSSOP |
| Supply Voltage Range | 3 V to 3.6 V |
| Maximum Transmit Clock | 65 MHz |
| Parallel Input Width | 28 bits |
| RGB Data Width | 24 bits |
| LVDS Data Outputs | 4 differential outputs |
| Clock Output | 1 differential phase-locked transmit-clock output |
| Protocol | FPD-Link and LVDS |
| Packaging | Tube |
Ключевые отличия
- Dedicated 24-bit display transmitter architecture (против DS90C387VJD-TI)
- Integrated phase-locked clock transmission (против General-purpose parallel display interface)
- Fixed high-speed display-channel allocation (против Multipurpose interface controller)
Заметки по проектированию
Place the 3.3 V supply and ground decoupling capacitors adjacent to the transmitter’s supply terminals, with the shortest possible return path through a continuous ground plane. Treat the four LVDS data pairs and the clock pair as controlled-impedance differential routes. Keep the pairs tightly coupled, match their geometry, and avoid discontinuities such as test pads, vias, or abrupt width changes immediately beneath the device.
Evaluate the complete transmitter-to-receiver channel rather than only the source outputs. At the documented 65 MHz maximum transmit-clock frequency, confirm differential impedance, pair-length balance, clock jitter margin, receiver input thresholds, and the resulting eye diagram. The separate clock link must reach the receiving endpoint with adequate amplitude and timing margin, because clock degradation can impair decoding even when the data-eye test appears acceptable.
Do not interpret the four LVDS data outputs as four complete video links. Together they serialize the 28-bit input word, and the separate differential clock output supplies the timing reference. Verify RGB bit order, the three control-bit assignments, receiver mapping, and connector polarity before power-up. Incorrect data mapping can produce corrupted pixels even when supply voltage, clock frequency, and differential amplitude are correct.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the technical records for this exact MPN.