EFM32G290F128-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32G290F128-BGA112 ✓ সক্রিয়EFM32G290F128-BGA112 সারাংশ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G290 belongs to the EFM32 Gecko family and the broader embedded-controller hierarchy: Cortex-M3 processor core, 32-bit microcontroller, embedded processor, and semiconductor. Its combination of 128 kB flash, 16 kB RAM, and extensive mixed-signal peripherals makes it suitable for compact control systems that require local processing without a separate external processor.
The EFM32G290F128-BGA112 runs at up to 32 MHz and provides 90 digital I/O pins, giving a high pin count for a 10 x 10 mm BGA device. Three 16-bit timers support precise timing, motor control, and periodic sensing tasks. Eight 12-bit ADC channels and two 12-bit DAC channels provide integrated analog measurement and signal generation, reducing the need for external converters in many designs. Integrated AES hardware accelerates cryptographic operations for data protection and authenticated communication.
Its low-power architecture is central to the Gecko design. Energy-saving modes, fast wake-up behavior, and low-energy techniques allow the processor to remain responsive while reducing consumption during idle periods. This is particularly useful in battery-operated equipment where the duty cycle alternates between brief processing intervals and long standby periods. The combination of a 32 MHz Cortex-M3 core and dedicated sleep behavior supports responsive control without requiring continuous high-frequency operation.
Typical applications include connected sensor nodes, industrial condition-monitoring equipment, compact energy meters, building-automation endpoints, wearable accessories, and embedded gateways. The 90 available digital I/O pins can support displays, buttons, communication interfaces, status indicators, and external sensors, while the ADC and DAC channels support analog front ends. The integrated AES hardware can protect firmware-related secrets, configuration data, or communication payloads when an application requires encryption.
For PCB design, use the manufacturer datasheet and application note AN0002, EFM32 Hardware Design Considerations, to assign BGA pads, route power and ground, manage decoupling, and verify exposed-pad and thermal-via requirements. Because this package has 112 fine-pitch BGA lands, inspection and assembly depend on suitable PCB density, pad geometry, solder-paste control, and reflow profiling.
This product page combines device specifications, package guidance, application fit, and same-package replacement context to help engineers evaluate the EFM32G290F128-BGA112 before committing a new design. The comparison focuses on documented memory, speed, analog resources, security features, and package compatibility rather than treating devices with different memory configurations as interchangeable without review.
এর জন্য ড্রপ-ইন বিকল্প EFM32G290F128-BGA112 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible EFM32G290F128-BGA112 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Digital I/O Pins, Maximum CPU Frequency, Mounting Type, RAM.
EFM32G290F32-BGA112
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EFM32G890F128-BGA112
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EFM32GG290F1024-BGA112
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →EFM32WG290F64-BGA112
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
EFM32G290F128-BGA112 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 kB |
| RAM | 16 kB |
| Digital I/O Pins | 90 pins |
| ADC Channels | 8 channels at 12-bit resolution |
| DAC Channels | 2 channels at 12-bit resolution |
| Timer Count | 3 timers at 16-bit resolution |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Processor Architecture | ARM Cortex-M3, 32-bit RISC |
| প্যাকেজ | 112-BGA, 10 x 10 mm |
| মাউন্টিং টাইপ | Surface-mount BGA |
| Security Feature | Integrated AES hardware |
| Memory Protection Unit | Up to 8 memory segments |
| Low-Power Feature | Energy-saving modes and fast wake-up |
| Wake-up Interrupt Controller | Integrated |
EFM32G290F128-BGA112 112-bga, 10 x 10 mm পিন কনফিগারেশন গাইড
EFM32G290F128-BGA112 (112-bga, 10 x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি EFM32G290F128-BGA112.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
EFM32G290F128-BGA112 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Node, Connected Smart Home Endpoint, Wearable Health Monitor, Secure IoT Meter, Battery-Powered Condition Monitoring, Audio and Control Interface.
Industrial Sensor Node
The EFM32G290F128-BGA112 suits compact industrial sensor nodes that must acquire analog measurements and remain responsive during short active intervals. Its eight 12-bit ADC channels provide direct inputs for temperature, pressure, or level sensing, while the 32 MHz Cortex-M3 core can filter samples and manage communications without a separate processor. The 16 kB RAM supports buffering and protocol state, and 128 kB flash provides room for firmware, calibration data, and diagnostics. Energy-saving modes are especially valuable when the node wakes periodically to sample and transmit, although the final duty cycle should be validated against the specified operating-mode currents.
সুপারিশকৃত
Connected Smart Home Endpoint
The EFM32G290F128-BGA112 can implement a compact smart-home endpoint that combines local control, analog sensing, and encrypted communication. Its 90 digital I/O pins provide ample connections for buttons, indicators, relay-control signals, and external sensors, while eight ADC channels support environmental measurements. AES hardware accelerates protection of configuration or communication data, and the 32 MHz processor leaves performance headroom for protocol processing. The device's sleep modes help reduce energy use in always-installed equipment, while its 128 kB flash and 16 kB RAM support a networking stack and application firmware without immediate reliance on external memory.
সুপারিশকৃত
Wearable Health Monitor
The EFM32G290F128-BGA112 is appropriate for a compact wearable or health-monitor module that records sensor data and maintains a low-power operating profile. The eight 12-bit ADC channels can acquire signals from biometric or exercise sensors, and the 32 MHz Cortex-M3 core can perform filtering between measurements. Three 16-bit timers provide timing resources for sampling, sensor timing, and low-power duty-cycle control. The integrated AES capability can protect stored or transmitted health-related data, while energy-saving modes and fast wake-up help limit consumption during inactive periods.
সুপারিশকৃত
Secure IoT Meter
The EFM32G290F128-BGA112 fits an IoT meter requiring local measurement, tamper-aware control, and protected communications. The two 12-bit DAC channels can support excitation, calibration, or test-signal functions, while eight ADC channels handle voltage and current sensing. AES hardware provides a dedicated basis for encrypted data handling, and the 128 kB flash and 16 kB RAM provide capacity for calibration tables, metering algorithms, and communication code. Low-energy operation is valuable because grid-connected and battery-backed meters spend much of their service interval idle or waiting for a measurement event.
সুপারিশকৃত
Battery-Powered Condition Monitoring
The EFM32G290F128-BGA112 supports battery-powered condition-monitoring equipment where the MCU must wake, measure, evaluate, and sleep again. Its fast-wake-up behavior and energy-saving modes can shorten the active interval compared with continuously running designs, while the 32 MHz core provides enough processing speed to complete sensor filtering and local event detection. The 90 digital I/O pins can accommodate expansion sensors, status signals, and communications. Three 16-bit timers can establish periodic sampling or debounce intervals, and the 16 kB RAM allows temporary storage of samples without immediate external-memory expansion.
সুপারিশকৃত
Audio and Control Interface
The EFM32G290F128-BGA112 can serve as the controller for a compact audio or general-purpose control module that requires both digital interfaces and analog functions. Its 90 digital I/O pins can support buttons, encoders, display signals, and external audio-control lines, while the ADC and DAC channels provide 12-bit conversion resources. The 32 MHz Cortex-M3 core can implement control logic and signal management, and AES hardware can protect configuration exchange. Because the device is not specified here as a dedicated high-performance audio codec, analog signal quality and interface timing should be evaluated against the external circuitry and the device's electrical characteristics.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা EFM32G290F128-BGA112 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | EFM32G290F32-BGA112 | EFM32G890F128-BGA112 | EFM32GG290F1024-BGA112 | EFM32WG290F64-BGA112 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Flash Memory | 128 kB | 32 kB | 128 kB | 1024 kB | 64 kB |
মূল পার্থক্যসমূহ
- Higher memory capacity within the G290 family (বনামEFM32G290F32-BGA112)
- Matches the flash capacity of the G890 candidate while retaining the target device architecture (বনামEFM32G890F128-BGA112)
- Lower clock speed with substantially lower memory demand (বনামEFM32GG290F1024-BGA112)
- Avoids adding the wireless-feature variant while retaining the 112-BGA format (বনামEFM32WG290F64-BGA112)
ডিজাইন নোট
Use the 112-BGA land pattern and assembly recommendations in the EFM32G290 datasheet. Keep the 1.98 V to 3.8 V supply routing short, place decoupling capacitors close to their associated supply pins, and provide a low-impedance ground plane. Application note AN0002, EFM32 Hardware Design Considerations, is the appropriate starting point for pad assignment, PCB stack-up, and general layout guidance.
Design the 3.3 V power path for both average demand and startup transients. The target's operating supply range is 1.98 V to 3.8 V, but the allowable ripple, droop, and sequencing behavior must be checked in the electrical characteristics. Use local bulk capacitance where load transients occur and route high-current return paths to avoid sharing narrow neck regions with sensitive analog signals.
The 112-BGA construction limits direct heat dissipation and may require thermal vias beneath the device according to the package drawing and PCB assembly process. Calculate junction temperature from actual ambient temperature, device dissipation, and the board-specific thermal resistance rather than relying only on a generic package estimate. Review pad and via geometry with the manufacturer guidelines before releasing the PCB for fabrication.
Route analog inputs away from switching nodes and digital clock signals, and reference them to a quiet ground region where possible. Although the ADC is 12-bit, practical accuracy also depends on source impedance, acquisition time, reference stability, and input filtering. Use the datasheet's recommended analog topology and avoid long traces that add coupling between adjacent high-impedance sensor nodes.
Do not approve a replacement solely because it has the same 112-BGA package designation. Compare pad functions, peripheral mappings, memory map, boot behavior, clock requirements, and development-tool compatibility for EFM32G290F32-BGA112, EFM32G890F128-BGA112, EFM32GG290F1024-BGA112, or EFM32WG290F64-BGA112. Also confirm that the exact production suffix and packaging form match the approved BOM entry.
কমপ্লায়েন্স তথ্য
The available product information identifies the EFM32G290F128-BGA112 as a Silicon Labs microcontroller but does not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.