EFM32G290F128-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32G290F128-BGA112 ✓ NakahandaEFM32G290F128-BGA112 Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G290 belongs to the EFM32 Gecko family and the broader embedded-controller hierarchy: Cortex-M3 processor core, 32-bit microcontroller, embedded processor, and semiconductor. Its combination of 128 kB flash, 16 kB RAM, and extensive mixed-signal peripherals makes it suitable for compact control systems that require local processing without a separate external processor.
The EFM32G290F128-BGA112 runs at up to 32 MHz and provides 90 digital I/O pins, giving a high pin count for a 10 x 10 mm BGA device. Three 16-bit timers support precise timing, motor control, and periodic sensing tasks. Eight 12-bit ADC channels and two 12-bit DAC channels provide integrated analog measurement and signal generation, reducing the need for external converters in many designs. Integrated AES hardware accelerates cryptographic operations for data protection and authenticated communication.
Its low-power architecture is central to the Gecko design. Energy-saving modes, fast wake-up behavior, and low-energy techniques allow the processor to remain responsive while reducing consumption during idle periods. This is particularly useful in battery-operated equipment where the duty cycle alternates between brief processing intervals and long standby periods. The combination of a 32 MHz Cortex-M3 core and dedicated sleep behavior supports responsive control without requiring continuous high-frequency operation.
Typical applications include connected sensor nodes, industrial condition-monitoring equipment, compact energy meters, building-automation endpoints, wearable accessories, and embedded gateways. The 90 available digital I/O pins can support displays, buttons, communication interfaces, status indicators, and external sensors, while the ADC and DAC channels support analog front ends. The integrated AES hardware can protect firmware-related secrets, configuration data, or communication payloads when an application requires encryption.
For PCB design, use the manufacturer datasheet and application note AN0002, EFM32 Hardware Design Considerations, to assign BGA pads, route power and ground, manage decoupling, and verify exposed-pad and thermal-via requirements. Because this package has 112 fine-pitch BGA lands, inspection and assembly depend on suitable PCB density, pad geometry, solder-paste control, and reflow profiling.
This product page combines device specifications, package guidance, application fit, and same-package replacement context to help engineers evaluate the EFM32G290F128-BGA112 before committing a new design. The comparison focuses on documented memory, speed, analog resources, security features, and package compatibility rather than treating devices with different memory configurations as interchangeable without review.
Mga alternatibo na pwedeng ilagay na EFM32G290F128-BGA112 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok EFM32G290F128-BGA112 (parehas na form factor at footprint) — pagkakaiba sa Package, Digital I/O Pins, Maximum CPU Frequency, Mounting Type, RAM.
EFM32G290F32-BGA112
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EFM32G890F128-BGA112
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EFM32GG290F1024-BGA112
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →EFM32WG290F64-BGA112
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
EFM32G290F128-BGA112 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 kB |
| RAM | 16 kB |
| Digital I/O Pins | 90 pins |
| ADC Channels | 8 channels at 12-bit resolution |
| DAC Channels | 2 channels at 12-bit resolution |
| Timer Count | 3 timers at 16-bit resolution |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Processor Architecture | ARM Cortex-M3, 32-bit RISC |
| Packhaging | 112-BGA, 10 x 10 mm |
| Uri ng Pagpapasok | Surface-mount BGA |
| Security Feature | Integrated AES hardware |
| Memory Protection Unit | Up to 8 memory segments |
| Low-Power Feature | Energy-saving modes and fast wake-up |
| Wake-up Interrupt Controller | Integrated |
Gabay sa Pin Configuration ng EFM32G290F128-BGA112 112-bga, 10 x 10 mm
Pin configuration para sa EFM32G290F128-BGA112 (112-bga, 10 x 10 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa EFM32G290F128-BGA112.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
EFM32G290F128-BGA112 ay nararapat para sa 6 aplikasyons: Industrial Sensor Node, Connected Smart Home Endpoint, Wearable Health Monitor, Secure IoT Meter, Battery-Powered Condition Monitoring, Audio and Control Interface.
Industrial Sensor Node
The EFM32G290F128-BGA112 suits compact industrial sensor nodes that must acquire analog measurements and remain responsive during short active intervals. Its eight 12-bit ADC channels provide direct inputs for temperature, pressure, or level sensing, while the 32 MHz Cortex-M3 core can filter samples and manage communications without a separate processor. The 16 kB RAM supports buffering and protocol state, and 128 kB flash provides room for firmware, calibration data, and diagnostics. Energy-saving modes are especially valuable when the node wakes periodically to sample and transmit, although the final duty cycle should be validated against the specified operating-mode currents.
Inirekomenda
Connected Smart Home Endpoint
The EFM32G290F128-BGA112 can implement a compact smart-home endpoint that combines local control, analog sensing, and encrypted communication. Its 90 digital I/O pins provide ample connections for buttons, indicators, relay-control signals, and external sensors, while eight ADC channels support environmental measurements. AES hardware accelerates protection of configuration or communication data, and the 32 MHz processor leaves performance headroom for protocol processing. The device's sleep modes help reduce energy use in always-installed equipment, while its 128 kB flash and 16 kB RAM support a networking stack and application firmware without immediate reliance on external memory.
Inirekomenda
Wearable Health Monitor
The EFM32G290F128-BGA112 is appropriate for a compact wearable or health-monitor module that records sensor data and maintains a low-power operating profile. The eight 12-bit ADC channels can acquire signals from biometric or exercise sensors, and the 32 MHz Cortex-M3 core can perform filtering between measurements. Three 16-bit timers provide timing resources for sampling, sensor timing, and low-power duty-cycle control. The integrated AES capability can protect stored or transmitted health-related data, while energy-saving modes and fast wake-up help limit consumption during inactive periods.
Inirekomenda
Secure IoT Meter
The EFM32G290F128-BGA112 fits an IoT meter requiring local measurement, tamper-aware control, and protected communications. The two 12-bit DAC channels can support excitation, calibration, or test-signal functions, while eight ADC channels handle voltage and current sensing. AES hardware provides a dedicated basis for encrypted data handling, and the 128 kB flash and 16 kB RAM provide capacity for calibration tables, metering algorithms, and communication code. Low-energy operation is valuable because grid-connected and battery-backed meters spend much of their service interval idle or waiting for a measurement event.
Inirekomenda
Battery-Powered Condition Monitoring
The EFM32G290F128-BGA112 supports battery-powered condition-monitoring equipment where the MCU must wake, measure, evaluate, and sleep again. Its fast-wake-up behavior and energy-saving modes can shorten the active interval compared with continuously running designs, while the 32 MHz core provides enough processing speed to complete sensor filtering and local event detection. The 90 digital I/O pins can accommodate expansion sensors, status signals, and communications. Three 16-bit timers can establish periodic sampling or debounce intervals, and the 16 kB RAM allows temporary storage of samples without immediate external-memory expansion.
Inirekomenda
Audio and Control Interface
The EFM32G290F128-BGA112 can serve as the controller for a compact audio or general-purpose control module that requires both digital interfaces and analog functions. Its 90 digital I/O pins can support buttons, encoders, display signals, and external audio-control lines, while the ADC and DAC channels provide 12-bit conversion resources. The 32 MHz Cortex-M3 core can implement control logic and signal management, and AES hardware can protect configuration exchange. Because the device is not specified here as a dedicated high-performance audio codec, analog signal quality and interface timing should be evaluated against the external circuitry and the device's electrical characteristics.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for EFM32G290F128-BGA112 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | EFM32G290F32-BGA112 | EFM32G890F128-BGA112 | EFM32GG290F1024-BGA112 | EFM32WG290F64-BGA112 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) | 112-BGA (10x10) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Flash Memory | 128 kB | 32 kB | 128 kB | 1024 kB | 64 kB |
Pangunahing mga Pagkakaiba
- Higher memory capacity within the G290 family (kumpara saEFM32G290F32-BGA112)
- Matches the flash capacity of the G890 candidate while retaining the target device architecture (kumpara saEFM32G890F128-BGA112)
- Lower clock speed with substantially lower memory demand (kumpara saEFM32GG290F1024-BGA112)
- Avoids adding the wireless-feature variant while retaining the 112-BGA format (kumpara saEFM32WG290F64-BGA112)
Talaan ng Disenyo
Use the 112-BGA land pattern and assembly recommendations in the EFM32G290 datasheet. Keep the 1.98 V to 3.8 V supply routing short, place decoupling capacitors close to their associated supply pins, and provide a low-impedance ground plane. Application note AN0002, EFM32 Hardware Design Considerations, is the appropriate starting point for pad assignment, PCB stack-up, and general layout guidance.
Design the 3.3 V power path for both average demand and startup transients. The target's operating supply range is 1.98 V to 3.8 V, but the allowable ripple, droop, and sequencing behavior must be checked in the electrical characteristics. Use local bulk capacitance where load transients occur and route high-current return paths to avoid sharing narrow neck regions with sensitive analog signals.
The 112-BGA construction limits direct heat dissipation and may require thermal vias beneath the device according to the package drawing and PCB assembly process. Calculate junction temperature from actual ambient temperature, device dissipation, and the board-specific thermal resistance rather than relying only on a generic package estimate. Review pad and via geometry with the manufacturer guidelines before releasing the PCB for fabrication.
Route analog inputs away from switching nodes and digital clock signals, and reference them to a quiet ground region where possible. Although the ADC is 12-bit, practical accuracy also depends on source impedance, acquisition time, reference stability, and input filtering. Use the datasheet's recommended analog topology and avoid long traces that add coupling between adjacent high-impedance sensor nodes.
Do not approve a replacement solely because it has the same 112-BGA package designation. Compare pad functions, peripheral mappings, memory map, boot behavior, clock requirements, and development-tool compatibility for EFM32G290F32-BGA112, EFM32G890F128-BGA112, EFM32GG290F1024-BGA112, or EFM32WG290F64-BGA112. Also confirm that the exact production suffix and packaging form match the approved BOM entry.
Impormasyon ng Pagsunod sa Kautusan
The available product information identifies the EFM32G290F128-BGA112 as a Silicon Labs microcontroller but does not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.