Renesas Electronics

ICS1524AM - Dual Output Phase Controlled SSTL_3/PECL Clock Generator | Renesas

MPN: ICS1524AM ✓ সক্রিয়
SOIC-24 (0.295 in, 7.50 mm width) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ICS1524AM সারাংশ

The Renesas (formerly Integrated Device Technology / IDT) ICS1524AM is a dual-output phase-controlled SSTL_3/PECL clock generator integrated into a 24-pin SOIC surface-mount package. It is cataloged under clock generators, PLLs and frequency synthesizers and is described as a low-cost, very high-performance frequency generator and phase-controlled clock synthesizer, delivering two independently phase-controlled differential clock outputs from a common reference source.

A clock generator is a timing IC that converts a reference frequency into one or more output clocks, forming the entry point of the clock and timing hierarchy that runs from crystal oscillator through clock generator and PLL to clock buffer and jitter cleaner. Where a plain buffer only reproduces an existing waveform, a phase-controlled clock generator adds programmable delay and frequency synthesis, allowing a board to create two related but independently adjustable clocks without a separate PLL, delay line or FPGA fabric.

Key characteristics of this device include a dual-output architecture, SSTL_3/PECL-compatible differential output signalling designed for high-speed backplane and telecommunications links, phase control of each output, and a 24-SOIC package with a 0.295 inch (7.50 mm) body width. Because it is a differential ECL-family output device, it is normally used with terminated 50 ohm transmission lines, short stub lengths and controlled reference planes in multilayer boards.

Internally, the device combines a phase-locked loop with programmable phase shift elements feeding two output buffers. The phase adjustment range, operating frequency band and lock characteristics are the parameters that determine whether it can lock to the system reference and deliver the required skew margin. Because it is a bipolar ECL-family design, supply rails are positive-referenced, typically around 5 V with PECL-compatible output levels, and the unused supply pins must still be connected to keep the device within its rated operating condition.

Typical uses include telecommunications line-card and network interface clock distribution, server and storage backplane clock synthesis, data-converter sampling clock generation, and instrumentation or test systems that require two phase-offset clocks from a single reference. In these systems the two outputs are commonly used to create a sampling clock and a data-strobe clock, or to feed a PLL capture circuit with an offset reference clock.

When laying out a board around the ICS1524AM, keep output and input traces short, provide solid ground-plane continuity under the device, and place termination close to the receiver. Verify differential pair length matching, keep the phase-control network away from high-speed output routing, and confirm the reference clock amplitude meets the input sensitivity requirement in the manufacturer datasheet before committing the layout.

This page consolidates device classification, package details, drop-in ordering variants, and practical layout guidance into one engineering reference, so you can evaluate the ICS1524AM against alternative dual-output clock generators without hunting through separate distributor listings and application notes.

এর জন্য ড্রপ-ইন বিকল্প ICS1524AM — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ICS1524AMT

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-24
same die, same 24-SOIC land pattern and electrical function, differing only in tape-and-reel ordering code (identical key ratings: 2 outputs, SSTL_3/PECL, same frequency and phase ranges)

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ICS1524

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-24
base catalog ordering code of the same ICS1524 dual-output phase-controlled PECL clock generator in the identical 24-SOIC package (no frequency or phase-range change versus ICS1524AM)

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ICS1524AM বিশেষণ

Device Category Clock Generators, PLLs, Frequency Synthesizers
ফাংশন Dual output phase controlled clock generator / clock synthesizer
আউটপুটের সংখ্যা 2
Output Logic Level SSTL_3 / PECL
Output Signalling Differential ECL-family clock output
প্যাকেজ SOIC-24 (0.295 in, 7.50 mm width)
মাউন্টিং টাইপ Surface Mount
Manufacturer Renesas Electronics America Inc (formerly Integrated Device Technology / IDT)
Datasheet Format PDF, approximately 400 KB
Datasheet Publication Date 2005-12-23

ICS1524AM soic-24 (0.295 in, 7.50 mm width) পিন কনফিগারেশন গাইড

ICS1524AM (soic-24 (0.295 in, 7.50 mm width) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

ICS1524AM-এর জন্য soic-24 (0.295 in, 7.50 mm width) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ICS1524AM.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ICS1524AM এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Telecom Line-Card Clock Distribution, Server and Storage Backplane Clock Synthesis, ADC and DAC Sampling Clock Generation, RF and Microwave Module Reference Clocks, Test and Measurement Instrumentation, Industrial and Consumer Network Equipment.

🌐

Telecom Line-Card Clock Distribution

The ICS1524AM fits line-card and tributary-unit designs that must derive two related clocks from one network reference. Its dual-output phase-controlled architecture lets one output drive the framer payload path while the second provides an offset clock for the line-side recovery PLL, improving capture margin without adding a second synthesizer. The SSTL_3/PECL differential outputs match the high-speed backplane signalling used in telecommunications equipment, and the 24-SOIC footprint keeps the component accessible for assembly and rework. Compared with a discrete crystal plus two buffer approach, the part removes a component and adds adjustable phase, which shortens board area and gives the design a single tuning point for skew margin.

🖥️

Server and Storage Backplane Clock Synthesis

Backplane designs in servers and storage systems need a stable reference converted into two phase-aligned clocks for data and strobe paths, and the ICS1524AM provides exactly that from a single input. Its phase-controlled outputs allow the board to trim skew between a data clock and its associated strobe, which directly reduces eye-margin loss on long backplane channels. Differential PECL-family signalling is well matched to current-mode backplane drivers and receivers, and the 24-SOIC package places the device close to the connector region of the board. Unlike a simple clock buffer, this part can present a deliberately offset capture clock, an option often used in source-synchronous interface designs.

📈

ADC and DAC Sampling Clock Generation

Data converters in instrumentation and communications front ends need a low-jitter sampling clock, and the ICS1524AM provides it as a phase-controlled synthesis stage rather than a raw buffer. By driving the sampling path from one output and the auxiliary or interleaved path from the second, a converter front end can be given two related clocks with a deliberate phase relationship, which is valuable for interleaved architectures and for DDR-style capture timing. The differential outputs drive the converter clock inputs cleanly through terminated lines, and the 24-SOIC package allows placement near the converter cluster for short, low-skew routing. The key design check is the phase-adjustment range versus the required sampling offset, which must be confirmed against the manufacturer datasheet.

✈️

RF and Microwave Module Reference Clocks

RF modules and microwave synthesizers in radar, satellite and wireless infrastructure depend on a clean, phase-adjustable reference that can be steered into a downstream PLL for lock. The ICS1524AM is used here as the phase-controlled reference stage: one output feeds the synthesizer chain while the second supplies a shifted reference for narrow loop bandwidth or fast lock behaviour. The differential ECL-family output structure couples efficiently into the low-impedance inputs typical of RF and microwave sub-systems, and the surface-mount 24-SOIC package keeps the design compact for module-level integration. Because the device is referenced to a positive supply, the layout must keep return-current paths continuous and isolate the phase-control network from sensitive RF paths.

🔧

Test and Measurement Instrumentation

Bench instruments and automated test equipment frequently need a deterministic pair of clocks with a known offset for sampling a DUT at two instants. The ICS1524AM suits this role because the phase relationship between its two outputs can be adjusted, allowing the instrument to present a stimulus clock and a delayed reference clock to the device under test without an external delay line. The differential outputs drive probe and fixture networks with good noise immunity, and the 24-SOIC package allows the part to be placed close to the fixture connector. This application is where the programmable phase feature is worth more than raw frequency alone, and it is why the dual-output, phase-controlled architecture is specified rather than a plain buffer.

🏭

Industrial and Consumer Network Equipment

Industrial gateways, switches and consumer networking products embed the ICS1524AM to fan out a single oscillator reference into phase-controlled clocks for PHY, processor and memory subsystems. Using one generator instead of several buffers keeps the number of clock domains managed, since the two outputs share a common PLL and therefore a common jitter and phase relationship. Differential PECL-family signalling is used where the design drives short board-level links between a PHY and a line-card daughterboard, while the 24-SOIC package allows economical surface-mount assembly in cost-sensitive consumer products. The main design consideration is decoupling: supply and ground pins must be tied with a solid plane and terminated at the receiver to maintain signal integrity at the ECL-family swing.

What is the ICS1524AM?
The ICS1524AM is a dual-output phase-controlled SSTL_3/PECL clock generator from Renesas Electronics (formerly IDT), packaged in a 24-pin SOIC. It is a low-cost, high-performance frequency generator and phase-controlled clock synthesizer with two independently phase-controlled outputs, and it is cataloged in the clock generators, PLLs and frequency synthesizers class.
What is the ICS1524AM used for?
The ICS1524AM is used to synthesize and distribute two phase-related clocks from a common reference in telecommunications, networking, server backplane, data-converter sampling and instrumentation designs. Because both outputs are phase controlled, one output can drive a sampling clock while the other supplies a shifted data-strobe or offset reference clock to a PLL capture circuit.
What package does the ICS1524AM come in?
The ICS1524AM is offered in a 24-pin SOIC surface-mount package with a body width of 0.295 inch (7.50 mm). Distributor listings confirm the SOIC-24 package designation, which matters when allocating board area and defining the land pattern for surface-mount assembly.
How do I download the ICS1524AM datasheet PDF?
The Renesas ICS1524AM datasheet PDF is accessible from the manufacturer datasheet entry point linked on this page, with a mirrored copy listed at approximately 400 KB and published on 2005-12-23. Use the manufacturer datasheet for the authoritative pin description table, recommended supply circuit and phase-control truth tables before laying out a board.
Where can I find the ICS1524AM pinout?
The pin assignment for the ICS1524AM must be taken from the pin description table in the manufacturer datasheet, because the 24-pin SOIC pinout combines power, ground, reference clock input, feedback input and two differential output pairs. Assign PCB tracks from that table rather than from a generic 24-pin SOIC template, since supply and feedback pins occupy specific positions.
What is the difference between ICS1524AM and ICS1524AMLF?
The ICS1524AM and ICS1524AMLF are the same clock generator family in different surface-mount packages: ICS1524AM is the 24-pin SOIC version, while ICS1524AMLF is the lead-free fine-pitch variant. They are functionally equivalent for most designs, but the land pattern and assembly process differ, so ICS1524AMLF is a board-level substitution rather than a pin-for-pin drop-in on an existing ICS1524AM footprint.
Is the ICS1524AM still available?
The manufacturer lists the ICS1524AM as an active catalog entry with current distributor inventory and standard ordering codes in production packaging. For a firm availability check and lead time for your specific quantity, submit the Request a Quote form on this page and confirm the delivery schedule at order placement.
Where can I buy the ICS1524AM and what is the price?
The ICS1524AM is sourced through the Request a Quote form on this page, which returns current pricing, stock position and lead time for the exact ordering code you need. Because this part is distributed through several specialty channels with different stocking models, a quote request gives a single confirmed commercial answer for your required quantity and delivery date.
What is the lead time for the ICS1524AM?
Lead time for the ICS1524AM depends on the quantity ordered and the manufacturing cycle of the exact ordering code, so request the current lead time through the Request a Quote form on this page. Requests for prototype quantities and for production volumes are handled differently, so state the annual usage and the required delivery window when you submit the request.
ICS1524AM vs a switching-regulator-based clock solution - which is better?
For a low-jitter, phase-controlled clock in a high-speed backplane or telecom line card, the ICS1524AM is the better choice because it is a dedicated phase-controlled PLL clock synthesizer with differential PECL-class outputs. A switch-mode clock tree is simpler to source but injects more jitter and radiating noise near sensitive data paths, so it suits lower-performance distribution instead.
When should I choose the ICS1524AM over a plain clock buffer?
Choose the ICS1524AM when the design needs two phase-related outputs derived from one reference, or when an adjustable phase offset is required for capture margin. A clock buffer only reproduces an existing waveform with fixed skew, so it cannot synthesise a second frequency or trim phase, and it cannot substitute when a PLL-based clock synthesizer is required.
What is the best drop-in replacement for the ICS1524AM?
The closest drop-in replacement is the same-family ICS1524AM ordering code with a different package or tape-and-reel suffix, such as ICS1524AMT, which uses the identical 24-SOIC footprint and the same internal function. Because the ICS1524AMLF variant uses a different land pattern, it requires a layout change and is not a true pin-for-pin drop-in on an existing ICS1524AM board.
Can ICS1524AMLF replace ICS1524AM on an existing PCB?
No, the ICS1524AMLF is not a pin-for-pin drop-in replacement for the ICS1524AM because the two use different surface-mount packages, 24-pin SOIC versus a fine-pitch lead-free variant. The footprints are not compatible, so a new land pattern and new assembly stencil are required before the change can be made on an existing design.
What are the key specifications engineers should know about the ICS1524AM?
The key specifications of the ICS1524AM are its dual-output architecture, SSTL_3/PECL differential output signalling, phase-controlled clock synthesis function and 24-pin SOIC package. The device is designed as a low-cost, very high-performance frequency generator and phase-controlled clock synthesizer, and its supply, frequency and phase-adjustment limits are defined in the manufacturer datasheet.
How should the ICS1524AM be laid out for reliable PECL operation?
Lay out the ICS1524AM with short output traces, solid uninterrupted ground-plane reference under the device, and the PECL/SSTL_3 termination network placed close to the receiving device rather than at the transmitter. Keep the phase-control and feedback routing away from the differential output pairs, and follow the recommended decoupling and layout figures in the manufacturer datasheet.
Is the ICS1524AM RoHS compliant?
The RoHS status of the ICS1524AM is confirmed in the manufacturer product documentation and material declaration for the catalog entry; the ordering code suffix used in the 24-pin SOIC version reflects the lead-free surface-mount option. Check the current declaration of conformity for your specific lot and packaging before shipping a regulated product.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ICS1524AM — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ICS1524AM when the design needs two phase-related differential clocks from a single reference and the board is a telecommunications, backplane, data-converter or instrumentation platform. Its value is the adjustable phase relationship between the two outputs, which lets one channel act as a sampling clock and the other as an offset or capture clock. If a design only needs to reproduce one waveform with fixed skew, a clock buffer is simpler and cheaper, so this part would be overkill. If the system must drive multiple destinations from one reference, add a dedicated clock buffer after the ICS1524AM rather than splitting its outputs directly, since stubs degrade edge rate and phase control. For an existing board, stay with 24-SOIC ordering codes such as ICS1524AMT or ICS1524; moving to the fine-pitch lead-free variant is a redesign, not a substitution. Finally, confirm supply voltage, operating frequency band and phase-adjustment limits in the manufacturer datasheet before committing the layout.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ICS1524AMT ICS1524
Package SOIC-24 (0.295 in, 7.50 mm width) SOIC-24 - same SOIC-24 - same
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Function Dual output phase controlled clock generator / synthesizer Dual output phase controlled clock generator / synthesizer Dual output phase controlled clock generator / synthesizer
Number of Outputs 2 2 2
Output Logic Level SSTL_3 / PECL SSTL_3 / PECL SSTL_3 / PECL
Output Signalling Differential ECL-family clock output Differential ECL-family clock output Differential ECL-family clock output
Phase Control Yes, phase controlled outputs Yes, phase controlled outputs Yes, phase controlled outputs
Assembly Order Code ICS1524AM ICS1524AMT - same die, tape-and-reel ordering code ICS1524 - base catalog ordering code

মূল পার্থক্যসমূহ

  • Integrated phase control on both outputs avoids an external delay line or second synthesizer (বনামPlain clock buffer solutions)
  • SSTL_3/PECL differential output family matches high-speed backplane signalling directly (বনামCMOS or LVDS clock generator families)
  • Same-family ordering codes let a 24-SOIC design stay on its existing land pattern (বনামICS1524AMLF)

ডিজাইন নোট

This device is an ECL-family (SSTL_3/PECL) part, so its output current must be terminated into the receiver's supply-referenced network rather than a plain 50 ohm to ground. Follow the reference termination arrangement in the manufacturer datasheet typical application circuit: keep the termination resistors adjacent to the receiving device, keep output and input pair lengths matched, and route the differential pairs over a continuous ground plane so the return path is not broken by a split or a plane change.

Route the two clock output pairs away from the feedback and phase-control nets. Because the phase-adjust network influences the synthesised clock, placing it adjacent to high-speed output routing creates a coupling path that can show up as jitter or unexpected phase shift. Keep the feedback trace short and quiet, use a solid plane for ground and supply distribution to the device, and place any bypass capacitors immediately at the supply pins of the SOIC-24 footprint rather than at the far end of the run.

Do not treat the two outputs as independent free-running clocks: they are derived from a common PLL, so both outputs share the same lock behaviour and jitter. Confirm the phase adjustment range and the PLL lock characteristics in the manufacturer datasheet before committing to an inter-output offset. Also remember that supply pins on ECL-family devices are referenced to a positive rail, so leaving any supply or ground pin unconnected will degrade or destroy operation even if the functional pins are correct.

When driving a cable, connector or long trace from this clock output, apply the differential termination at the far end and keep stub branches extremely short, because each stub adds a discontinuity that degrades the ECL-family edge rate. If the design must fan out to more than two destinations, insert a separate clock buffer rather than splitting the ICS1524AM output directly, since a split point harms the phase relationship the part was chosen to deliver.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status was not stated in the available catalog and distributor records for this catalog entry; the lead-free surface-mount ordering code is part of the standard 24-SOIC product line. Confirm the current declaration of conformity for the specific ordering code and packaging before releasing a regulated design.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ICS1524AM datasheet ICS1524AM pinout ICS1524AM datasheet pdf ICS1524AM SOIC-24 ICS1524AM price ICS1524AM stock ICS1524AM equivalent ICS1524AM replacement ICS1524AM vs ICS1524AMLF Renesas ICS1524AM dual output phase controlled PECL clock generator ICS1524 clock generator telecommunications SSTL_3 PECL clock generator SOIC-24 ICS1524AM footprint

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Renesas Electronics Integrated Device Technology (IDT) ICS1524AM ICS1524AMT ICS1524AMLF clock generator PLL frequency synthesizer phase-controlled clock synthesis SSTL_3 PECL ECL differential clock output SOIC-24 QFN family surface mount SMD timing IC clock buffer jitter backplane clock distribution sampling clock RoHS telecommunications line card
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন