ICS1524AM - Dual Output Phase Controlled SSTL_3/PECL Clock Generator | Renesas
부품 번호: ICS1524AM ✓ 활성ICS1524AM 개요
A clock generator is a timing IC that converts a reference frequency into one or more output clocks, forming the entry point of the clock and timing hierarchy that runs from crystal oscillator through clock generator and PLL to clock buffer and jitter cleaner. Where a plain buffer only reproduces an existing waveform, a phase-controlled clock generator adds programmable delay and frequency synthesis, allowing a board to create two related but independently adjustable clocks without a separate PLL, delay line or FPGA fabric.
Key characteristics of this device include a dual-output architecture, SSTL_3/PECL-compatible differential output signalling designed for high-speed backplane and telecommunications links, phase control of each output, and a 24-SOIC package with a 0.295 inch (7.50 mm) body width. Because it is a differential ECL-family output device, it is normally used with terminated 50 ohm transmission lines, short stub lengths and controlled reference planes in multilayer boards.
Internally, the device combines a phase-locked loop with programmable phase shift elements feeding two output buffers. The phase adjustment range, operating frequency band and lock characteristics are the parameters that determine whether it can lock to the system reference and deliver the required skew margin. Because it is a bipolar ECL-family design, supply rails are positive-referenced, typically around 5 V with PECL-compatible output levels, and the unused supply pins must still be connected to keep the device within its rated operating condition.
Typical uses include telecommunications line-card and network interface clock distribution, server and storage backplane clock synthesis, data-converter sampling clock generation, and instrumentation or test systems that require two phase-offset clocks from a single reference. In these systems the two outputs are commonly used to create a sampling clock and a data-strobe clock, or to feed a PLL capture circuit with an offset reference clock.
When laying out a board around the ICS1524AM, keep output and input traces short, provide solid ground-plane continuity under the device, and place termination close to the receiver. Verify differential pair length matching, keep the phase-control network away from high-speed output routing, and confirm the reference clock amplitude meets the input sensitivity requirement in the manufacturer datasheet before committing the layout.
This page consolidates device classification, package details, drop-in ordering variants, and practical layout guidance into one engineering reference, so you can evaluate the ICS1524AM against alternative dual-output clock generators without hunting through separate distributor listings and application notes.
드롭인 대체품: ICS1524AM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ICS1524AMT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ICS1524
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ICS1524AM 사양
| Device Category | Clock Generators, PLLs, Frequency Synthesizers |
| 기능 | Dual output phase controlled clock generator / clock synthesizer |
| 출력 수 | 2 |
| Output Logic Level | SSTL_3 / PECL |
| Output Signalling | Differential ECL-family clock output |
| 패키지 | SOIC-24 (0.295 in, 7.50 mm width) |
| 실장 유형 | Surface Mount |
| Manufacturer | Renesas Electronics America Inc (formerly Integrated Device Technology / IDT) |
| Datasheet Format | PDF, approximately 400 KB |
| Datasheet Publication Date | 2005-12-23 |
ICS1524AM soic-24 (0.295 in, 7.50 mm width) 핀 구성 가이드
ICS1524AM(soic-24 (0.295 in, 7.50 mm width) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ICS1524AM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ICS1524AM 적합 용도: 6 애플리케이션s: Telecom Line-Card Clock Distribution, Server and Storage Backplane Clock Synthesis, ADC and DAC Sampling Clock Generation, RF and Microwave Module Reference Clocks, Test and Measurement Instrumentation, Industrial and Consumer Network Equipment.
Telecom Line-Card Clock Distribution
The ICS1524AM fits line-card and tributary-unit designs that must derive two related clocks from one network reference. Its dual-output phase-controlled architecture lets one output drive the framer payload path while the second provides an offset clock for the line-side recovery PLL, improving capture margin without adding a second synthesizer. The SSTL_3/PECL differential outputs match the high-speed backplane signalling used in telecommunications equipment, and the 24-SOIC footprint keeps the component accessible for assembly and rework. Compared with a discrete crystal plus two buffer approach, the part removes a component and adds adjustable phase, which shortens board area and gives the design a single tuning point for skew margin.
추천
Server and Storage Backplane Clock Synthesis
Backplane designs in servers and storage systems need a stable reference converted into two phase-aligned clocks for data and strobe paths, and the ICS1524AM provides exactly that from a single input. Its phase-controlled outputs allow the board to trim skew between a data clock and its associated strobe, which directly reduces eye-margin loss on long backplane channels. Differential PECL-family signalling is well matched to current-mode backplane drivers and receivers, and the 24-SOIC package places the device close to the connector region of the board. Unlike a simple clock buffer, this part can present a deliberately offset capture clock, an option often used in source-synchronous interface designs.
추천
ADC and DAC Sampling Clock Generation
Data converters in instrumentation and communications front ends need a low-jitter sampling clock, and the ICS1524AM provides it as a phase-controlled synthesis stage rather than a raw buffer. By driving the sampling path from one output and the auxiliary or interleaved path from the second, a converter front end can be given two related clocks with a deliberate phase relationship, which is valuable for interleaved architectures and for DDR-style capture timing. The differential outputs drive the converter clock inputs cleanly through terminated lines, and the 24-SOIC package allows placement near the converter cluster for short, low-skew routing. The key design check is the phase-adjustment range versus the required sampling offset, which must be confirmed against the manufacturer datasheet.
추천
RF and Microwave Module Reference Clocks
RF modules and microwave synthesizers in radar, satellite and wireless infrastructure depend on a clean, phase-adjustable reference that can be steered into a downstream PLL for lock. The ICS1524AM is used here as the phase-controlled reference stage: one output feeds the synthesizer chain while the second supplies a shifted reference for narrow loop bandwidth or fast lock behaviour. The differential ECL-family output structure couples efficiently into the low-impedance inputs typical of RF and microwave sub-systems, and the surface-mount 24-SOIC package keeps the design compact for module-level integration. Because the device is referenced to a positive supply, the layout must keep return-current paths continuous and isolate the phase-control network from sensitive RF paths.
추천
Test and Measurement Instrumentation
Bench instruments and automated test equipment frequently need a deterministic pair of clocks with a known offset for sampling a DUT at two instants. The ICS1524AM suits this role because the phase relationship between its two outputs can be adjusted, allowing the instrument to present a stimulus clock and a delayed reference clock to the device under test without an external delay line. The differential outputs drive probe and fixture networks with good noise immunity, and the 24-SOIC package allows the part to be placed close to the fixture connector. This application is where the programmable phase feature is worth more than raw frequency alone, and it is why the dual-output, phase-controlled architecture is specified rather than a plain buffer.
추천
Industrial and Consumer Network Equipment
Industrial gateways, switches and consumer networking products embed the ICS1524AM to fan out a single oscillator reference into phase-controlled clocks for PHY, processor and memory subsystems. Using one generator instead of several buffers keeps the number of clock domains managed, since the two outputs share a common PLL and therefore a common jitter and phase relationship. Differential PECL-family signalling is used where the design drives short board-level links between a PHY and a line-card daughterboard, while the 24-SOIC package allows economical surface-mount assembly in cost-sensitive consumer products. The main design consideration is decoupling: supply and ground pins must be tied with a solid plane and terminated at the receiver to maintain signal integrity at the ECL-family swing.
추천
추천 제품 요약
엔지니어링 참조 데이터: ICS1524AM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ICS1524AMT | ICS1524 |
|---|---|---|---|
| Package | SOIC-24 (0.295 in, 7.50 mm width) | SOIC-24 - same | SOIC-24 - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Function | Dual output phase controlled clock generator / synthesizer | Dual output phase controlled clock generator / synthesizer | Dual output phase controlled clock generator / synthesizer |
| Number of Outputs | 2 | 2 | 2 |
| Output Logic Level | SSTL_3 / PECL | SSTL_3 / PECL | SSTL_3 / PECL |
| Output Signalling | Differential ECL-family clock output | Differential ECL-family clock output | Differential ECL-family clock output |
| Phase Control | Yes, phase controlled outputs | Yes, phase controlled outputs | Yes, phase controlled outputs |
| Assembly Order Code | ICS1524AM | ICS1524AMT - same die, tape-and-reel ordering code | ICS1524 - base catalog ordering code |
주요 차별점
- Integrated phase control on both outputs avoids an external delay line or second synthesizer (vs Plain clock buffer solutions)
- SSTL_3/PECL differential output family matches high-speed backplane signalling directly (vs CMOS or LVDS clock generator families)
- Same-family ordering codes let a 24-SOIC design stay on its existing land pattern (vs ICS1524AMLF)
설계 노트
This device is an ECL-family (SSTL_3/PECL) part, so its output current must be terminated into the receiver's supply-referenced network rather than a plain 50 ohm to ground. Follow the reference termination arrangement in the manufacturer datasheet typical application circuit: keep the termination resistors adjacent to the receiving device, keep output and input pair lengths matched, and route the differential pairs over a continuous ground plane so the return path is not broken by a split or a plane change.
Route the two clock output pairs away from the feedback and phase-control nets. Because the phase-adjust network influences the synthesised clock, placing it adjacent to high-speed output routing creates a coupling path that can show up as jitter or unexpected phase shift. Keep the feedback trace short and quiet, use a solid plane for ground and supply distribution to the device, and place any bypass capacitors immediately at the supply pins of the SOIC-24 footprint rather than at the far end of the run.
Do not treat the two outputs as independent free-running clocks: they are derived from a common PLL, so both outputs share the same lock behaviour and jitter. Confirm the phase adjustment range and the PLL lock characteristics in the manufacturer datasheet before committing to an inter-output offset. Also remember that supply pins on ECL-family devices are referenced to a positive rail, so leaving any supply or ground pin unconnected will degrade or destroy operation even if the functional pins are correct.
When driving a cable, connector or long trace from this clock output, apply the differential termination at the far end and keep stub branches extremely short, because each stub adds a discontinuity that degrades the ECL-family edge rate. If the design must fan out to more than two destinations, insert a separate clock buffer rather than splitting the ICS1524AM output directly, since a split point harms the phase relationship the part was chosen to deliver.
규정 준수 정보
Compliance status was not stated in the available catalog and distributor records for this catalog entry; the lead-free surface-mount ordering code is part of the standard 24-SOIC product line. Confirm the current declaration of conformity for the specific ordering code and packaging before releasing a regulated design.