ICS557G-08 - 200MHz PCIe Clock Multiplexer | Renesas
MPN: ICS557G-08 ✓ সক্রিয়ICS557G-08 সারাংশ
A PCI Express clock multiplexer is a clock-and-timing IC used to route differential clock signals inside high-speed digital equipment. In the signal hierarchy, it belongs to the PCIe clock source and clock-driver category, combining input-pair selection, differential distribution, and PLL-based clock generation. HCSL means Host Clock Signal Level, while LVDS means Low-Voltage Differential Signaling; both are differential signaling methods suited to high-speed clock distribution.
The ICS557G-08 supports a clock output frequency up to 200 MHz and is identified as a 2:1 multiplexer. Its principal features are dual input-pair selection, one differential output pair, support for HCSL or LVDS operation, and a surface-mount 16-pin TSSOP package. The 200 MHz operating point makes the device applicable to PCI Express clocking systems that require controlled selection between reference-clock sources.
Its PLL-based architecture is important in a PCIe design because clock-source transitions can affect downstream jitter and system timing. The selected input pair is fanned out through a differential output stage, preserving the electrical signaling method expected by the receiving clock buffer or peripheral. Designers should still validate source-to-destination transition requirements, termination, return-path continuity, and receiver thresholds in the final channel.
Typical uses include PCI Express endpoint clock distribution, server and workstation expansion-card designs, embedded PCI Express equipment, and industrial host systems that must select between two external reference clocks. The device can also be considered in test systems where a selectable differential clock source is needed for compatibility or fault-injection testing.
When laying out a board, place the IC near the clock source and receiving device, provide a continuous reference plane beneath the differential route, and use impedance-controlled pairs with matched through or via structures. Decoupling should follow the manufacturer reference layout. Because this is a high-speed differential clock device, routing symmetry and connector or package-transition geometry are generally more consequential than a conventional low-speed bypass-only layout.
This page consolidates the manufacturer and distributor product information into an engineering summary covering the 2:1 multiplexing function, 200 MHz output capability, package constraints, replacement considerations, and practical PCB guidance. It also distinguishes the exact ICS557G-08 ordering code from other family suffixes and the earlier 8-pin SOIC device so procurement and redesign decisions use the correct footprint.
এর জন্য ড্রপ-ইন বিকল্প ICS557G-08 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ICS557G-08T
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
557G-08LF
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
557G-08LFT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ICS557G-08 বিশেষণ
| Device Type | PCI Express (PCIe) clock multiplexer IC |
| Multiplexing Ratio | 2:1 |
| Maximum Output Frequency | 200 MHz |
| Output Count | 1 differential output pair |
| Input Configuration | 2 selectable differential input pairs |
| Input Signaling | HCSL or LVDS |
| Output Signaling | HCSL or LVDS |
| Clock Architecture | PLL-based clock generation |
| Supply Voltage Range | 3.14 V to 3.46 V |
| অপারেটিং তাপমাত্রার পরিসর | 0 C to 70 C |
| প্যাকেজ | 16-pin TSSOP |
| মাউন্টিং টাইপ | Surface mount |
ICS557G-08 16-pin tssop পিন কনফিগারেশন গাইড
ICS557G-08 (16-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ICS557G-08.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ICS557G-08 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: PCI Express Endpoint Clocking, PCI Express Expansion Cards, Server PCI Express Clock Distribution, Industrial PCI Express Control Systems, Embedded PCI Express Modules, PCIe Interface Test Equipment.
PCI Express Endpoint Clocking
The ICS557G-08 fits PCI Express endpoint designs that need one of two differential reference clocks selected locally. Its 2:1 architecture accepts two HCSL or LVDS input pairs and provides one differential output pair, while the documented operating frequency reaches 200 MHz. Placing the multiplexer close to the endpoint clock receiver can shorten sensitive clock routing. The design should preserve matched differential geometry, use the manufacturer’s recommended power and decoupling layout, and verify transition timing with the actual clock source and PCIe receiver.
সুপারিশকৃত
PCI Express Expansion Cards
A PCI Express expansion card can use the ICS557G-08 when it receives two candidate reference clocks but requires one selected differential clock at the local interface. The device’s 2:1 multiplexing function, 200 MHz capability, and HCSL or LVDS support suit high-speed clock routing on compact add-in cards. Place the device near the clock input and output connectors, keep return paths continuous, and match the card’s differential impedance to the motherboard interconnect to minimize discontinuities.
সুপারিশকৃত
Server PCI Express Clock Distribution
The ICS557G-08 can support selectable clock distribution within a server or workstation design that presents multiple PCIe reference-clock options. One differential output pair at up to 200 MHz provides a focused clock path for a PCIe interface without requiring parallel clock outputs. The main engineering consideration is channel integrity: route the differential pair over a continuous reference plane, control impedance, minimize vias, and confirm that source switching and PLL behavior meet the downstream device’s timing limits.
সুপারিশকৃত
Industrial PCI Express Control Systems
Industrial control systems can use the ICS557G-08 to select between two external reference-clock pairs for a PCIe-based controller or data-acquisition module. HCSL and LVDS support allows the clock stage to work with high-speed differential sources, while the 2:1 arrangement keeps the downstream topology compact. Designers should account for the 3.14 V to 3.46 V supply range documented for the related ICS557G-08LF ordering variant, validate local thermal conditions, and maintain controlled return paths around the clock network.
সুপারিশকৃত
Embedded PCI Express Modules
The ICS557G-08 is suitable for compact embedded PCIe modules that need a selectable high-speed clock source. Its 16-pin TSSOP package avoids the larger footprint associated with a multi-output clock device, and its 200 MHz rating matches the stated operating class of the ICS557G-08. In a space-constrained design, prioritize short differential routes, solid ground reference, and the manufacturer’s recommended component placement. Confirm that the selected source pair remains valid under every operating mode before releasing the layout.
সুপারিশকৃত
PCIe Interface Test Equipment
Test equipment can use the ICS557G-08 to select and distribute one of two differential reference-clock sources for interface validation. The 2:1 input architecture is useful when a board must be exercised with alternate clock conditions while retaining one differential output connection. Because the documented operating point reaches 200 MHz, routing quality directly affects the test signal. Use matched pairs, controlled impedances, and repeatable terminations, and compare the selected clock against the receiver’s jitter and timing expectations.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ICS557G-08 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Renesas Electronics |
| Package | 16-pin TSSOP |
| Device Type | PCI Express clock multiplexer IC |
| Multiplexing Ratio | 2:1 |
| Maximum Output Frequency | 200 MHz |
| Output Configuration | 1 differential output pair |
| Input Configuration | 2 selectable differential input pairs |
| Input Signaling | HCSL or LVDS |
| Output Signaling | HCSL or LVDS |
| Clock Architecture | PLL-based |
মূল পার্থক্যসমূহ
- Compact exact-package PCIe clock multiplexer (বনামICS557-08)
- Selectable differential clock architecture (বনামICS557G-08T)
- Multi-format differential clock support (বনামICS557G-08LF)
ডিজাইন নোট
Treat every HCSL or LVDS route as a controlled-impedance differential channel. Keep the input and output pairs continuous, match their geometry, maintain a continuous reference plane, and minimize layer changes. Place termination or decoupling components at the device pins rather than far along the route, and follow the manufacturer reference layout for the 16-pin TSSOP footprint.
Validate the complete source-to-receiver channel rather than relying only on the nominal 200 MHz rating. Clock quality can be affected by connector transitions, package parasitics, return-path discontinuities, and mismatched terminations. Confirm the selected HCSL or LVDS mode against the receiver thresholds and use the manufacturer’s timing and electrical characteristics to establish usable operating limits.
Do not treat the ICS557G-08T or ICS557G-08LF ordering variants as unconditional substitutes. Ordering suffixes may identify different packaging, temperature, or delivery configurations, and the ICS557-08 family’s earlier 8-pin SOIC description has a different footprint from the 16-pin TSSOP ICS557G-08. Confirm the manufacturer ordering guide and verify every pin assignment before substitution.
কমপ্লায়েন্স তথ্য
The accessible product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The ICS557G-08 is a general-purpose clock-and-timing IC rather than an automotive-qualified device.