Renesas Electronics

ICS557G-08 - 200MHz PCIe Clock Multiplexer | Renesas

MPN: ICS557G-08 ✓ فعال
3.14 V to 3.46 V Vdss 16-pin TSSOP Package 200 MHz Speed
MOQ: 1 |

ICS557G-08 جائزہ

The Renesas Electronics ICS557G-08 is a PCI Express clock multiplexer IC with a 200 MHz output, one differential output pair, and a 16-pin TSSOP package. It uses a 2:1 multiplexing architecture to select one of two HCSL or LVDS input pairs and fan the selected clock into a differential HCSL or LVDS output pair. This arrangement gives a PCI Express clock source a practical way to switch between reference sources without changing the downstream clock architecture.

A PCI Express clock multiplexer is a clock-and-timing IC used to route differential clock signals inside high-speed digital equipment. In the signal hierarchy, it belongs to the PCIe clock source and clock-driver category, combining input-pair selection, differential distribution, and PLL-based clock generation. HCSL means Host Clock Signal Level, while LVDS means Low-Voltage Differential Signaling; both are differential signaling methods suited to high-speed clock distribution.

The ICS557G-08 supports a clock output frequency up to 200 MHz and is identified as a 2:1 multiplexer. Its principal features are dual input-pair selection, one differential output pair, support for HCSL or LVDS operation, and a surface-mount 16-pin TSSOP package. The 200 MHz operating point makes the device applicable to PCI Express clocking systems that require controlled selection between reference-clock sources.

Its PLL-based architecture is important in a PCIe design because clock-source transitions can affect downstream jitter and system timing. The selected input pair is fanned out through a differential output stage, preserving the electrical signaling method expected by the receiving clock buffer or peripheral. Designers should still validate source-to-destination transition requirements, termination, return-path continuity, and receiver thresholds in the final channel.

Typical uses include PCI Express endpoint clock distribution, server and workstation expansion-card designs, embedded PCI Express equipment, and industrial host systems that must select between two external reference clocks. The device can also be considered in test systems where a selectable differential clock source is needed for compatibility or fault-injection testing.

When laying out a board, place the IC near the clock source and receiving device, provide a continuous reference plane beneath the differential route, and use impedance-controlled pairs with matched through or via structures. Decoupling should follow the manufacturer reference layout. Because this is a high-speed differential clock device, routing symmetry and connector or package-transition geometry are generally more consequential than a conventional low-speed bypass-only layout.

This page consolidates the manufacturer and distributor product information into an engineering summary covering the 2:1 multiplexing function, 200 MHz output capability, package constraints, replacement considerations, and practical PCB guidance. It also distinguishes the exact ICS557G-08 ordering code from other family suffixes and the earlier 8-pin SOIC device so procurement and redesign decisions use the correct footprint.

کے لیے ڈراپ اِن متبادل ICS557G-08 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

ICS557G-08T

✅ ڈراپ-اِن
📦 16-TSSOP
Same 2:1 HCSL/LVDS multiplexer and 200 MHz maximum frequency; ordering suffix differs by 0% in the documented core specifications

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

557G-08LF

✅ ڈراپ-اِن
📦 16-TSSOP
Same 2:1 HCSL/LVDS multiplexer, 200 MHz maximum frequency, and 3.135 V to 3.465 V supply range; ordering suffix differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

557G-08LFT

✅ ڈراپ-اِن
📦 16-TSSOP
Same 2:1 HCSL/LVDS multiplexer and 16-TSSOP footprint; LFT ordering suffix differs while core electrical ratings remain equivalent

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS557G-08 تفصیلات

Device Type PCI Express (PCIe) clock multiplexer IC
Multiplexing Ratio 2:1
Maximum Output Frequency 200 MHz
Output Count 1 differential output pair
Input Configuration 2 selectable differential input pairs
Input Signaling HCSL or LVDS
Output Signaling HCSL or LVDS
Clock Architecture PLL-based clock generation
Supply Voltage Range 3.14 V to 3.46 V
آپریٹنگ درجہ حرارت رینج 0 C to 70 C
پیکیج 16-pin TSSOP
ماؤنٹنگ ٹائپ Surface mount

ICS557G-08 16-pin tssop پن کنفیگریشن گائیڈ

ICS557G-08 (16-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ICS557G-08 کے لیے 16-pin tssop پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS557G-08.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ICS557G-08 کے لیے موزوں ہے 6 ایپلیکیشنs: PCI Express Endpoint Clocking, PCI Express Expansion Cards, Server PCI Express Clock Distribution, Industrial PCI Express Control Systems, Embedded PCI Express Modules, PCIe Interface Test Equipment.

🖥️

PCI Express Endpoint Clocking

The ICS557G-08 fits PCI Express endpoint designs that need one of two differential reference clocks selected locally. Its 2:1 architecture accepts two HCSL or LVDS input pairs and provides one differential output pair, while the documented operating frequency reaches 200 MHz. Placing the multiplexer close to the endpoint clock receiver can shorten sensitive clock routing. The design should preserve matched differential geometry, use the manufacturer’s recommended power and decoupling layout, and verify transition timing with the actual clock source and PCIe receiver.

⚡

PCI Express Expansion Cards

A PCI Express expansion card can use the ICS557G-08 when it receives two candidate reference clocks but requires one selected differential clock at the local interface. The device’s 2:1 multiplexing function, 200 MHz capability, and HCSL or LVDS support suit high-speed clock routing on compact add-in cards. Place the device near the clock input and output connectors, keep return paths continuous, and match the card’s differential impedance to the motherboard interconnect to minimize discontinuities.

🖥️

Server PCI Express Clock Distribution

The ICS557G-08 can support selectable clock distribution within a server or workstation design that presents multiple PCIe reference-clock options. One differential output pair at up to 200 MHz provides a focused clock path for a PCIe interface without requiring parallel clock outputs. The main engineering consideration is channel integrity: route the differential pair over a continuous reference plane, control impedance, minimize vias, and confirm that source switching and PLL behavior meet the downstream device’s timing limits.

🏭

Industrial PCI Express Control Systems

Industrial control systems can use the ICS557G-08 to select between two external reference-clock pairs for a PCIe-based controller or data-acquisition module. HCSL and LVDS support allows the clock stage to work with high-speed differential sources, while the 2:1 arrangement keeps the downstream topology compact. Designers should account for the 3.14 V to 3.46 V supply range documented for the related ICS557G-08LF ordering variant, validate local thermal conditions, and maintain controlled return paths around the clock network.

🔧

Embedded PCI Express Modules

The ICS557G-08 is suitable for compact embedded PCIe modules that need a selectable high-speed clock source. Its 16-pin TSSOP package avoids the larger footprint associated with a multi-output clock device, and its 200 MHz rating matches the stated operating class of the ICS557G-08. In a space-constrained design, prioritize short differential routes, solid ground reference, and the manufacturer’s recommended component placement. Confirm that the selected source pair remains valid under every operating mode before releasing the layout.

🧩

PCIe Interface Test Equipment

Test equipment can use the ICS557G-08 to select and distribute one of two differential reference-clock sources for interface validation. The 2:1 input architecture is useful when a board must be exercised with alternate clock conditions while retaining one differential output connection. Because the documented operating point reaches 200 MHz, routing quality directly affects the test signal. Use matched pairs, controlled impedances, and repeatable terminations, and compare the selected clock against the receiver’s jitter and timing expectations.

What is the ICS557G-08?
The Renesas ICS557G-08 is a 2:1 PCI Express clock multiplexer that selects one of two differential input pairs and fans it out through one differential output pair. According to the Renesas 557-08 datasheet, it supports HCSL and LVDS signaling and uses PLL-based clock generation. The exact ordering code is specified in a 16-pin TSSOP package and is identified as a 200 MHz PCIe clock multiplexer.
What are the key specifications of ICS557G-08?
The ICS557G-08 provides a 2:1 input selection, one differential output pair, operation up to 200 MHz, and HCSL or LVDS signal support. The Renesas 557-08 datasheet also identifies PLL-based clock generation as part of the device architecture. Its package is 16-pin TSSOP, while the documented supply range is 3.14 V to 3.46 V for the related ICS557G-08LF ordering variant.
Where can I download the ICS557G-08 datasheet PDF?
The official ICS557G-08 datasheet is available through the Renesas product document page at https://www.renesas.com/en/document/dst/557-08-datasheet. A direct manufacturer-hosted PDF copy is also published at https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/375/ICS557-08_RevG.pdf. Use the Renesas document for configuration, timing, electrical characteristics, and package information associated with the 557-08 family.
Where can I find the ICS557G-08 pinout?
Use the 557-08 datasheet pin-description table and package drawing to assign the 16 TSSOP connections. The complete pin numbering for the exact ICS557G-08 ordering code is not reproduced here because it was not included in the accessible product text. Do not substitute the 8-pin SOIC arrangement associated with the earlier ICS557-08 description; the ICS557G-08 listing identifies a 16-pin TSSOP package.
How does the ICS557G-08 clock multiplexer work?
The ICS557G-08 selects one of two HCSL or LVDS differential input pairs and fans the selected pair out to one differential HCSL or LVDS output. According to the Renesas 557-08 datasheet, the device uses patented PLL techniques as part of its clock-source implementation. The 2:1 architecture is intended for systems that need a selectable reference clock while retaining a differential clock path.
Is ICS557G-08 suitable for PCI Express clock distribution?
The ICS557G-08 is specifically identified as a PCI Express clock multiplexer IC. Its 200 MHz maximum output frequency, selectable differential input pairs, and HCSL or LVDS support align with PCI Express clock-source requirements. Final suitability still depends on the system reference-clock frequency, PCIe device timing requirements, jitter expectations, and the electrical characteristics of the connected receiver.
What is the difference between ICS557G-08 and ICS557-08?
The principal documented difference is package construction: the ICS557G-08 is listed in a 16-pin TSSOP package, while the earlier ICS557-08 description identifies an 8-pin SOIC package with a pair of differential outputs. Because the package and pin count differ, ICS557-08 is not a drop-in replacement for ICS557G-08. A replacement must match the 16-pin TSSOP footprint and verify every signal, supply, and control connection.
When should I choose ICS557G-08 over another PCIe clock multiplexer?
Choose the ICS557G-08 when the design requires a 2:1 selection between two differential reference-clock pairs, HCSL or LVDS operation, and a maximum output frequency of 200 MHz in a 16-pin TSSOP package. It is particularly relevant to PCI Express systems that need one clock output to follow a selectable reference. Choose another device instead if the design requires a different package, frequency, logic level, or architecture.
Is ICS557G-08 the same as ICS557G-08T?
ICS557G-08 and ICS557G-08T are both listed as 200 MHz PCI Express clock multiplexer ICs in a 16-pin TSSOP package, but the ordering-code suffix can encode a packaging or delivery difference. The accessible product text does not define that suffix conclusively, so it should not be treated as a drop-in alternative without checking the manufacturer ordering guide. Use the exact ordering code required by the BOM and production plan.
What can replace the ICS557G-08?
No verified same-package drop-in replacement was identified for the exact ICS557G-08 ordering code. A valid replacement must use the 16-pin TSSOP footprint, provide compatible differential input and output assignments, support the system’s HCSL or LVDS levels, and meet the 200 MHz operating requirement. Use the Renesas cross-reference tool for current manufacturer guidance, then validate timing and pin-level behavior before releasing a substitute.
Is there a Renesas equivalent for ICS557G-08?
No confirmed Renesas drop-in equivalent was identified beyond the exact-family ordering variants shown in the product listings. Because family suffixes may represent packaging, temperature, or delivery options, they should not be substituted without reviewing the manufacturer ordering information. The Renesas cross-reference tool is the appropriate source for checking current equivalents, and any proposed part must preserve the 16-pin TSSOP footprint and differential clock functions.
What is the best cross-brand equivalent for ICS557G-08?
No cross-brand drop-in equivalent is currently established by the available product records. The replacement must match the 16-pin TSSOP package, the 2:1 differential input selection, HCSL or LVDS compatibility, and the system’s operating frequency. A device sharing only the 200 MHz rating is not a drop-in replacement because pin assignment, PLL behavior, output levels, and supply requirements must also align.
Where can I buy ICS557G-08 online?
Use the Request a Quote form on this page to request current availability, order quantities, lead time, and delivery options for the exact ICS557G-08 ordering code. The device is listed by Renesas Electronics and is shown in a 16-pin TSSOP package. Before approving a purchase, confirm that the quote corresponds to ICS557G-08 rather than a related ICS557G-08LF or ICS557G-08T ordering code.
What is the price of ICS557G-08?
Use the Request a Quote form on this page for the current price and quantity pricing of the exact ICS557G-08. The accessible product records identify the part and its 16-pin TSSOP configuration but do not provide an explicit quantity-break table suitable for direct extraction. Requesting a quote also helps confirm stock, minimum order quantity, lead time, and the correct manufacturer ordering suffix.
What is the lead time for ICS557G-08?
Request the current lead time through the Request a Quote form on this page. The exact ICS557G-08 ordering code is offered by Renesas Electronics, but no definitive manufacturing lead time is stated in the accessible product information. A written quotation can confirm available inventory, scheduled delivery, minimum order quantity, and whether the requested shipment uses tube, tape-and-reel, or another approved delivery format.
Is ICS557G-08 in stock?
Current stock for the exact ICS557G-08 should be confirmed through the Request a Quote form on this page. The product listing describes the device as available for ordering, but that statement does not establish a fixed quantity or a production lead time. Specify your required quantity, target date, and packaging preference when requesting the quotation to obtain a usable availability response.
How should ICS557G-08 be laid out for differential clock routing?
Route each differential pair as a continuous impedance-controlled transmission line with closely matched geometry and a continuous reference plane beneath it. Keep the device and the first decoupling or termination components close to the relevant pins, and avoid unnecessary stubs and layer changes. Follow the manufacturer reference layout for power, ground, and differential routing, then verify the complete channel with the intended PCIe receiver.
Does ICS557G-08 support LVDS and HCSL outputs?
Yes. The Renesas 557-08 datasheet describes the ICS557G-08 as a 2:1 multiplexer that selects one of two HCSL or LVDS input pairs and fans it out to one pair of differential HCSL or LVDS outputs. This flexibility supports systems that receive reference clocks using either signaling method, although the selected operating mode and termination must follow the manufacturer’s electrical recommendations.

کے لیے انجینئرنگ ریفرنس ڈیٹا ICS557G-08 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ICS557G-08 when a PCI Express design needs to select one of two differential reference-clock pairs and distribute the selected signal through one HCSL or LVDS output pair. Its 2:1 multiplexing architecture and 200 MHz operating point fit systems requiring a focused, selectable PCIe clock path in a 16-pin TSSOP package. Do not substitute the earlier 8-pin SOIC ICS557-08 because the footprint and pin count differ. The ICS557G-08T and ICS557G-08LF codes belong to the same broader 557-08 family, but suffix-dependent packaging or ordering characteristics require verification before procurement. For any third-party alternative, require the same 16-pin TSSOP footprint, matching differential pin assignments, compatible HCSL or LVDS levels, and acceptable timing at the system’s actual clock frequency.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Renesas Electronics
Package 16-pin TSSOP
Device Type PCI Express clock multiplexer IC
Multiplexing Ratio 2:1
Maximum Output Frequency 200 MHz
Output Configuration 1 differential output pair
Input Configuration 2 selectable differential input pairs
Input Signaling HCSL or LVDS
Output Signaling HCSL or LVDS
Clock Architecture PLL-based

اہم امتیازی خصوصیات

  • Compact exact-package PCIe clock multiplexer (بمقابلہICS557-08)
  • Selectable differential clock architecture (بمقابلہICS557G-08T)
  • Multi-format differential clock support (بمقابلہICS557G-08LF)

ڈیزائن نوٹس

Treat every HCSL or LVDS route as a controlled-impedance differential channel. Keep the input and output pairs continuous, match their geometry, maintain a continuous reference plane, and minimize layer changes. Place termination or decoupling components at the device pins rather than far along the route, and follow the manufacturer reference layout for the 16-pin TSSOP footprint.

Validate the complete source-to-receiver channel rather than relying only on the nominal 200 MHz rating. Clock quality can be affected by connector transitions, package parasitics, return-path discontinuities, and mismatched terminations. Confirm the selected HCSL or LVDS mode against the receiver thresholds and use the manufacturer’s timing and electrical characteristics to establish usable operating limits.

Do not treat the ICS557G-08T or ICS557G-08LF ordering variants as unconditional substitutes. Ordering suffixes may identify different packaging, temperature, or delivery configurations, and the ICS557-08 family’s earlier 8-pin SOIC description has a different footprint from the 16-pin TSSOP ICS557G-08. Confirm the manufacturer ordering guide and verify every pin assignment before substitution.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The accessible product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The ICS557G-08 is a general-purpose clock-and-timing IC rather than an automotive-qualified device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ICS557G-08 datasheet ICS557G-08 pinout ICS557G-08 datasheet pdf Renesas ICS557G-08 ICS557G-08 200MHz specifications ICS557G-08 16-TSSOP ICS557G-08 PCIe clock multiplexer ICS557G-08 equivalent ICS557G-08 replacement ICS557G-08 cross reference ICS557G-08 footprint ICS557G-08 price ICS557G-08 stock ICS557G-08 vs ICS557-08 ICS557G-08 application circuit

متعلقہ اجزاء اور اصطلاحات

Renesas Electronics ICS557G-08 ICS557G-08T ICS557G-08LF ICS557-08 PCI Express PCIe clock multiplexer clock and timing IC clock driver clock source 2:1 multiplexer HCSL Host Clock Signal Level LVDS Low-Voltage Differential Signaling PLL 200 MHz 16-pin TSSOP TSSOP package family surface-mount package differential clock PCI Express expansion card server industrial control system
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں