ICS557G-08 - 200MHz PCIe Clock Multiplexer | Renesas
Référence : ICS557G-08 ✓ ActifICS557G-08 Présentation
A PCI Express clock multiplexer is a clock-and-timing IC used to route differential clock signals inside high-speed digital equipment. In the signal hierarchy, it belongs to the PCIe clock source and clock-driver category, combining input-pair selection, differential distribution, and PLL-based clock generation. HCSL means Host Clock Signal Level, while LVDS means Low-Voltage Differential Signaling; both are differential signaling methods suited to high-speed clock distribution.
The ICS557G-08 supports a clock output frequency up to 200 MHz and is identified as a 2:1 multiplexer. Its principal features are dual input-pair selection, one differential output pair, support for HCSL or LVDS operation, and a surface-mount 16-pin TSSOP package. The 200 MHz operating point makes the device applicable to PCI Express clocking systems that require controlled selection between reference-clock sources.
Its PLL-based architecture is important in a PCIe design because clock-source transitions can affect downstream jitter and system timing. The selected input pair is fanned out through a differential output stage, preserving the electrical signaling method expected by the receiving clock buffer or peripheral. Designers should still validate source-to-destination transition requirements, termination, return-path continuity, and receiver thresholds in the final channel.
Typical uses include PCI Express endpoint clock distribution, server and workstation expansion-card designs, embedded PCI Express equipment, and industrial host systems that must select between two external reference clocks. The device can also be considered in test systems where a selectable differential clock source is needed for compatibility or fault-injection testing.
When laying out a board, place the IC near the clock source and receiving device, provide a continuous reference plane beneath the differential route, and use impedance-controlled pairs with matched through or via structures. Decoupling should follow the manufacturer reference layout. Because this is a high-speed differential clock device, routing symmetry and connector or package-transition geometry are generally more consequential than a conventional low-speed bypass-only layout.
This page consolidates the manufacturer and distributor product information into an engineering summary covering the 2:1 multiplexing function, 200 MHz output capability, package constraints, replacement considerations, and practical PCB guidance. It also distinguishes the exact ICS557G-08 ordering code from other family suffixes and the earlier 8-pin SOIC device so procurement and redesign decisions use the correct footprint.
Alternatives de remplacement direct pour ICS557G-08 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ICS557G-08T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
557G-08LF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
557G-08LFT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ICS557G-08 Spécifications
| Device Type | PCI Express (PCIe) clock multiplexer IC |
| Multiplexing Ratio | 2:1 |
| Maximum Output Frequency | 200 MHz |
| Output Count | 1 differential output pair |
| Input Configuration | 2 selectable differential input pairs |
| Input Signaling | HCSL or LVDS |
| Output Signaling | HCSL or LVDS |
| Clock Architecture | PLL-based clock generation |
| Supply Voltage Range | 3.14 V to 3.46 V |
| Plage de température de fonctionnement | 0 C to 70 C |
| Boîtier | 16-pin TSSOP |
| Type de montage | Surface mount |
Guide de configuration des broches du ICS557G-08 16-pin tssop
Configuration des broches du ICS557G-08 (boîtier 16-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour ICS557G-08.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ICS557G-08 convient pour 6 applications: PCI Express Endpoint Clocking, PCI Express Expansion Cards, Server PCI Express Clock Distribution, Industrial PCI Express Control Systems, Embedded PCI Express Modules, PCIe Interface Test Equipment.
PCI Express Endpoint Clocking
The ICS557G-08 fits PCI Express endpoint designs that need one of two differential reference clocks selected locally. Its 2:1 architecture accepts two HCSL or LVDS input pairs and provides one differential output pair, while the documented operating frequency reaches 200 MHz. Placing the multiplexer close to the endpoint clock receiver can shorten sensitive clock routing. The design should preserve matched differential geometry, use the manufacturer’s recommended power and decoupling layout, and verify transition timing with the actual clock source and PCIe receiver.
Recommandé
PCI Express Expansion Cards
A PCI Express expansion card can use the ICS557G-08 when it receives two candidate reference clocks but requires one selected differential clock at the local interface. The device’s 2:1 multiplexing function, 200 MHz capability, and HCSL or LVDS support suit high-speed clock routing on compact add-in cards. Place the device near the clock input and output connectors, keep return paths continuous, and match the card’s differential impedance to the motherboard interconnect to minimize discontinuities.
Recommandé
Server PCI Express Clock Distribution
The ICS557G-08 can support selectable clock distribution within a server or workstation design that presents multiple PCIe reference-clock options. One differential output pair at up to 200 MHz provides a focused clock path for a PCIe interface without requiring parallel clock outputs. The main engineering consideration is channel integrity: route the differential pair over a continuous reference plane, control impedance, minimize vias, and confirm that source switching and PLL behavior meet the downstream device’s timing limits.
Recommandé
Industrial PCI Express Control Systems
Industrial control systems can use the ICS557G-08 to select between two external reference-clock pairs for a PCIe-based controller or data-acquisition module. HCSL and LVDS support allows the clock stage to work with high-speed differential sources, while the 2:1 arrangement keeps the downstream topology compact. Designers should account for the 3.14 V to 3.46 V supply range documented for the related ICS557G-08LF ordering variant, validate local thermal conditions, and maintain controlled return paths around the clock network.
Recommandé
Embedded PCI Express Modules
The ICS557G-08 is suitable for compact embedded PCIe modules that need a selectable high-speed clock source. Its 16-pin TSSOP package avoids the larger footprint associated with a multi-output clock device, and its 200 MHz rating matches the stated operating class of the ICS557G-08. In a space-constrained design, prioritize short differential routes, solid ground reference, and the manufacturer’s recommended component placement. Confirm that the selected source pair remains valid under every operating mode before releasing the layout.
Recommandé
PCIe Interface Test Equipment
Test equipment can use the ICS557G-08 to select and distribute one of two differential reference-clock sources for interface validation. The 2:1 input architecture is useful when a board must be exercised with alternate clock conditions while retaining one differential output connection. Because the documented operating point reaches 200 MHz, routing quality directly affects the test signal. Use matched pairs, controlled impedances, and repeatable terminations, and compare the selected clock against the receiver’s jitter and timing expectations.
Recommandé
Données de référence d'ingénierie pour ICS557G-08 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Renesas Electronics |
| Package | 16-pin TSSOP |
| Device Type | PCI Express clock multiplexer IC |
| Multiplexing Ratio | 2:1 |
| Maximum Output Frequency | 200 MHz |
| Output Configuration | 1 differential output pair |
| Input Configuration | 2 selectable differential input pairs |
| Input Signaling | HCSL or LVDS |
| Output Signaling | HCSL or LVDS |
| Clock Architecture | PLL-based |
Principaux différenciateurs
- Compact exact-package PCIe clock multiplexer (vs ICS557-08)
- Selectable differential clock architecture (vs ICS557G-08T)
- Multi-format differential clock support (vs ICS557G-08LF)
Notes de conception
Treat every HCSL or LVDS route as a controlled-impedance differential channel. Keep the input and output pairs continuous, match their geometry, maintain a continuous reference plane, and minimize layer changes. Place termination or decoupling components at the device pins rather than far along the route, and follow the manufacturer reference layout for the 16-pin TSSOP footprint.
Validate the complete source-to-receiver channel rather than relying only on the nominal 200 MHz rating. Clock quality can be affected by connector transitions, package parasitics, return-path discontinuities, and mismatched terminations. Confirm the selected HCSL or LVDS mode against the receiver thresholds and use the manufacturer’s timing and electrical characteristics to establish usable operating limits.
Do not treat the ICS557G-08T or ICS557G-08LF ordering variants as unconditional substitutes. Ordering suffixes may identify different packaging, temperature, or delivery configurations, and the ICS557-08 family’s earlier 8-pin SOIC description has a different footprint from the 16-pin TSSOP ICS557G-08. Confirm the manufacturer ordering guide and verify every pin assignment before substitution.
Informations de conformité
The accessible product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The ICS557G-08 is a general-purpose clock-and-timing IC rather than an automotive-qualified device.