Texas Instruments

INA2126UA - Dual 36V Micropower INA | Texas Instruments

MPN: INA2126UA ✓ সক্রিয়
36 V Vdss 175 µA Id 16-pin SOIC (D) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

INA2126UA সারাংশ

Texas Instruments INA2126UA is a dual-channel precision instrumentation amplifier with a 36 V maximum supply, 175 µA quiescent current per channel, and 250 µV input offset voltage in a 16-pin SOIC (D) package. It is designed for accurate, low-noise differential-signal acquisition where low power and common-mode rejection are important.

An instrumentation amplifier is a specialized analog amplifier that combines differential input measurement, high input impedance, and accurate gain-setting in one package. Within the signal-chain hierarchy, it sits between sensors or bridge networks and higher-level ADC, control, or monitoring systems. Its differential architecture rejects common-mode interference while preserving the small voltage variations being measured.

The INA2126UA provides two amplifier channels, a 5 V/V to 10,000 V/V programmable gain range, and a gain error of no more than 0.04%. A typical input offset of 250 µV supports precision measurements, while the low 175 µA-per-channel quiescent current suits battery-powered and portable instrumentation. The device operates across an extended temperature range of -40°C to +85°C.

Internally, the INA2126 family uses a two-op-amp instrumentation-amplifier architecture. This structure provides a practical balance between low power, low noise, common-mode rejection, and user-programmable gain. The external resistor between the RG pins establishes the differential gain, allowing one device to serve multiple measurement ranges without changing the analog front end architecture.

Typical uses include bridge-transducer signal conditioning, portable measurement systems, battery-powered diagnostic equipment, industrial sensor interfaces, and low-current precision sensing. Its differential inputs are particularly useful when the source includes substantial common-mode voltage or interference relative to the wanted signal.

Design the layout around the RG resistor, input filtering, and supply grounding. Place the gain-setting resistor close to the device, provide adequate bypassing on both supply rails, and maintain a quiet return path to minimize errors that can dominate microvolt-level measurements. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and checking exposed alternatives.

This product page combines the manufacturer specifications with practical selection guidance, application analysis, pin-package context, and a parameter-by-parameter comparison. It is intended to help engineers identify whether the INA2126UA fits a low-power precision measurement design and how closely related same-family devices compare.

এর জন্য ড্রপ-ইন বিকল্প INA2126UA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible INA2126UA (একই form factor এবং footprint) — পার্থক্য রয়েছে Maximum Voltage Gain, Package.

Texas Instruments
Maximum Voltage Gain: 10000 V/V
Package: 16-pin SOIC
এর সাথে তুলনা করুন INA2126UA →

INA2126U

✅ ড্রপ-ইন
Texas Instruments
📦 SOIC-16 (D)
Dual precision instrumentation amplifier · 2 channels · 36 V · ±1.35 V to ±18 V · 2.7 V · 36 V · 175 µA · 250 µV

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

INA2126UE4

✅ ড্রপ-ইন
📦 SOIC-16 (D)
Supply 36 V, quiescent current 175 µA/channel, and offset 250 µV match; ordering and qualification suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

INA2126E/250G4

✅ ড্রপ-ইন
📦 SOIC-16 (D)
Core family ratings of 36 V maximum supply, 175 µA/channel, and 250 µV offset match; ordering, qualification, and packaging suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

INA2126UA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Dual precision instrumentation amplifier
Number of Channels 2 channels
Maximum Supply Voltage 36 V
Minimum Supply Voltage 2.7 V
Quiescent Current per Channel 175 µA
Input Offset Voltage 250 µV
Minimum Voltage Gain 5 V/V
Maximum Voltage Gain 10,000 V/V
Gain Error 0.04% maximum
Gain-Bandwidth Product 200 kHz
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
প্যাকেজ 16-pin SOIC (D)
মাউন্টিং টাইপ Surface mount

INA2126UA 16-pin soic (d) পিন কনফিগারেশন গাইড

INA2126UA (16-pin soic (d) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

INA2126UA-এর জন্য 16-pin soic (d) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি INA2126UA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

INA2126UA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Sensor Measurement, Bridge Transducer Signal Conditioning, Battery-Powered Diagnostic Equipment, Precision Current Sensing, Industrial Sensor Interfaces, Portable Data Acquisition.

📱

Portable Sensor Measurement

The INA2126UA suits portable and battery-operated sensor systems because its 175 µA quiescent current per channel limits the amplifier's contribution to standby demand. Two precision differential channels can measure paired sensors while a 2.7 V minimum supply supports low-energy operation. Its 250 µV offset and programmable gain from 5 V/V to 10,000 V/V permit small sensor outputs to be amplified without requiring a separate low-noise amplifier. The practical trade-off is that output common-mode behavior, reference configuration, and available input headroom must be checked against the selected gain and supply voltage.

🏭

Bridge Transducer Signal Conditioning

The INA2126UA is appropriate for resistive bridge outputs because its differential input arrangement reduces common-mode pickup and supports programmable gains up to 10,000 V/V. A 250 µV maximum input offset and 0.04% maximum gain error help preserve measurement accuracy in compact industrial transducers. The external RG resistor makes it practical to match gain to the bridge sensitivity without changing the amplifier package. Engineers should verify excitation voltage, bridge output range, input common-mode limits, and the resistor tolerance needed to meet the final system error budget.

💊

Battery-Powered Diagnostic Equipment

The dual-channel INA2126UA helps reduce the amplifier count in portable diagnostic instruments that acquire two related low-level signals. Its 175 µA-per-channel quiescent current supports a low-power design, while the 36 V maximum supply provides flexibility for higher-voltage diagnostic interfaces. Differential acquisition helps reject common-mode noise present on sensor wiring. Because the offset specification is 250 µV, the actual signal-to-error ratio depends strongly on sensor excitation and output amplitude; low-level channels may require calibration or a more precise gain-setting resistor.

⚡

Precision Current Sensing

The INA2126UA can amplify low differential voltages from current-sense elements in battery systems and industrial controllers. Differential inputs are useful when the sense voltage is small relative to its common-mode level, while programmable gain increases the usable ADC range without placing large signals directly on the converter input. The 250 µV offset must be evaluated against the target current resolution and shunt dissipation. Layout should use a compact sense path, avoid copper routes parallel to the low-level inputs, and provide local supply bypassing to prevent conducted noise from obscuring the measurement.

🔧

Industrial Sensor Interfaces

The INA2126UA offers a compact way to condition two industrial sensor outputs with high common-mode content. Its 36 V maximum supply accommodates a broader operating environment than low-voltage-only amplifiers, while the two-op-amp architecture maintains low power at 175 µA per channel. Gain can be selected from 5 V/V to 10,000 V/V using the external RG resistor, allowing one architecture to cover several sensor sensitivities. The design must still include input filtering, overvoltage protection, and reference selection appropriate to the expected common-mode and output ranges.

🖥️

Portable Data Acquisition

The INA2126UA fits two-channel portable data-acquisition systems requiring precision differential inputs and limited operating power. The 2.7 V minimum supply supports compact low-voltage platforms, while 175 µA quiescent current per channel leaves more of the system power budget available to sensors and signal processing. Its 5 V/V to 10,000 V/V gain range covers many low-level transducer outputs. For high-resolution conversion, evaluate input noise, common-mode rejection, offset across temperature, and RG-resistor tolerance because these characteristics can determine whether the amplifier or converter dominates the measurement error.

What is the INA2126UA instrumentation amplifier?
The INA2126UA is a dual-channel precision instrumentation amplifier designed for low-noise differential-signal acquisition. According to the Texas Instruments product page, it combines a 36 V maximum supply, 175 µA quiescent current per channel, and 250 µV input offset voltage in a 16-pin SOIC (D) package.
What are the key specifications of INA2126UA that engineers should know?
The INA2126UA is a dual instrumentation amplifier with 36 V maximum supply voltage, 175 µA quiescent current per channel, 250 µV input offset voltage, and programmable gain from 5 V/V to 10,000 V/V. The Texas Instruments product page identifies a -40°C to +85°C operating range and a 16-pin SOIC (D) package.
Where can I download the INA2126UA datasheet PDF?
The INA2126UA technical documentation is available through the Texas Instruments product page at https://www.ti.com/product/INA2126. The manufacturer documentation includes device specifications, pin descriptions, gain-setting guidance, and typical application information needed for schematic and PCB design.
Where can I find the INA2126UA pinout?
The INA2126UA uses a 16-pin SOIC (D) package. Use the pin-description table in the manufacturer datasheet to verify every connection before laying out the PCB, particularly the supply, ground, differential input, reference, output, and gain-setting resistor assignments.
How much current does the INA2126UA consume?
The INA2126UA consumes 175 µA of quiescent current per channel according to the Texas Instruments product description. Its dual-channel architecture therefore provides two low-noise measurement channels without requiring two separate precision amplifier packages.
What supply voltage does the INA2126UA require?
The INA2126UA supports supply voltages from 2.7 V to 36 V. The manufacturer describes the device as a dual 36 V micropower instrumentation amplifier, making it applicable to both low-voltage portable systems and higher-voltage industrial measurement equipment.
Is the INA2126UA suitable for low-voltage battery applications?
Yes, the INA2126UA is suitable for many battery-powered measurement systems because its quiescent current is 175 µA per channel and its minimum supply voltage is 2.7 V. The actual battery life also depends on sensor current, output loading, duty cycle, and the selected gain.
What is the difference between INA2126UA and INA2126U?
The INA2126UA and INA2126U both belong to the same Texas Instruments INA2126 family and use the 16-pin SOIC (D) package. Comparison information identifies the same 36 V maximum supply, 175 µA-per-channel supply current, 250 µV offset rating, and 5 V/V to 10,000 V/V gain range.
When should I choose the INA2126UA over INA2126U?
Choose the INA2126UA when the required temperature grade and ordering configuration match the INA2126UA part number and your design uses the 16-pin SOIC (D) footprint. The INA2126U offers the same core gain, supply, offset, and current ratings, so final selection should follow the manufacturer ordering table and qualification requirements.
What is the best drop-in replacement for the INA2126UA?
The closest same-family drop-in candidates are the INA2126U and INA2126UE4 because they use the 16-pin SOIC (D) package and match the 36 V, 175 µA-per-channel, and 250 µV offset ratings. Confirm the exact ordering suffix, temperature requirements, gain range, and pin assignment before replacing the device.
Can INA2126U replace INA2126UA without PCB changes?
Yes, the INA2126U can be a pin-compatible replacement because it uses the same 16-pin SOIC (D) package and matches the principal ratings of 36 V maximum supply, 175 µA per channel, 250 µV offset, and 5 V/V to 10,000 V/V gain. Verify the exact suffix and application qualification with the manufacturer ordering information.
What is the best Analog Devices equivalent for INA2126UA?
A cross-brand drop-in equivalent cannot be confirmed from the available manufacturer and comparison information for the INA2126UA. Do not substitute an amplifier solely because it supports similar differential inputs; verify the 16-pin pinout, supply range, gain-setting method, offset, noise, quiescent current, and qualification before approving a cross-brand replacement.
What can replace INA2126UA on the same PCB footprint?
The INA2126U is the clearest same-footprint replacement candidate because it retains the 16-pin SOIC (D) package and the same 36 V maximum supply, 175 µA-per-channel current, 250 µV offset, and 5 V/V to 10,000 V/V gain range. Treat the substitution as conditional until the exact suffix requirements are checked.
Is INA2126UA the same as INA2126U?
The INA2126UA and INA2126U are electrically similar members of the INA2126 family with matching 36 V maximum supply, 175 µA-per-channel current, 250 µV offset, gain range, and 16-pin SOIC (D) package. Their ordering suffixes can still encode different qualification or shipment configurations, so check the manufacturer ordering table.
Where can I request a quote for INA2126UA?
Use the Request a Quote form on this page to request current commercial terms, availability, lead time, and order quantities for INA2126UA. The manufacturer lists the device in a 16-pin SOIC (D) package with a -40°C to +85°C operating range.
What is the lead time and stock status of INA2126UA?
Current stock, minimum order quantity, and lead time for INA2126UA should be requested through the Request a Quote form on this page. The Texas Instruments ordering page identifies the part as a dual 36 V micropower instrumentation amplifier in the 16-pin SOIC (D) package.
How is the gain of an INA2126UA set?
The INA2126UA uses the standard instrumentation-amplifier arrangement with an external gain-setting resistor connected between the RG pins. The resistor selects the differential gain within the supported 5 V/V to 10,000 V/V range, and its value and tolerance should be checked against the manufacturer gain-setting equation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা INA2126UA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the INA2126UA when the design needs two precision differential channels, a 2.7 V to 36 V supply range, 175 µA quiescent current per channel, and programmable gain up to 10,000 V/V in a 16-pin SOIC (D) footprint. It is particularly suitable for portable instrumentation, bridge transducers, and low-level current sensing where common-mode rejection and low power matter. The INA2126U is the closest same-family choice when its ordering configuration satisfies the qualification and availability requirements; its core supply, current, offset, gain, and package ratings match. Consider INA2126UE4 when its ordering and qualification suffix aligns with the target design. INA2126E/250G4 may serve designs requiring that specific orderable configuration. Use a single-channel device only when one measurement channel is sufficient, because a dual package reduces board area and signal-chain component count. Before finalizing any substitution, verify the exact pin assignments, temperature grade, gain-setting equation, and qualification status.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য INA2126U INA2126UE4 INA2126E/250G4
Package SOIC-16 (D) SOIC-16 (D) SOIC-16 (D) SOIC-16 (D)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments

মূল পার্থক্যসমূহ

  • Two-channel integration in one 16-pin SOIC package (বনামINA126UA)
  • Same-footprint ordering alternatives retain the core electrical ratings (বনামINA2126U)
  • Low-power dual-channel precision acquisition (বনামINA2126E/250G4)

ডিজাইন নোট

Place the RG gain-setting resistor directly between the designated RG pins and minimize surrounding copper that could increase sensitivity to leakage. Keep input traces short, avoid routing them parallel to switching nodes, and use a continuous ground reference beneath the analog signal path. These practices are particularly important when the expected differential signal is comparable to the 250 µV input offset specification.

Evaluate the complete analog power budget using the 175 µA quiescent current per channel before finalizing a portable design. Supply bypass capacitors should be placed close to the power pins, with the ground connection returning directly to the device. Confirm that the 36 V maximum supply rating is never exceeded during startup, shutdown, or fault conditions, including transient overshoot from the upstream rail.

Do not select gain solely from the 5 V/V to 10,000 V/V headline range. Check input and output common-mode limits, the chosen RG resistor value, reference configuration, and the sensor's full-scale output at the intended supply voltage. An apparently correct gain can still clip or become inaccurate if the output range or input headroom is insufficient.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not stated in the available product information. Confirm these requirements through the manufacturer product documentation or ordering records.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

INA2126UA datasheet INA2126UA datasheet pdf INA2126UA pinout INA2126UA specifications INA2126UA equivalent INA2126UA replacement INA2126UA vs INA2126U INA2126UA SOIC-16 footprint INA2126UA price INA2126UA stock Texas Instruments INA2126UA INA2126 instrumentation amplifier INA2126 bridge sensor amplifier INA2126 current sensing application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments INA2126UA INA2126U INA2126UE4 INA2126E/250G4 INA126UA INA126PA instrumentation amplifier precision instrumentation amplifier differential signal acquisition two-op-amp architecture common-mode rejection input offset voltage quiescent current programmable gain gain-setting resistor SOIC-16 SOIC package family surface mount bridge transducer current sensing portable instrumentation industrial sensor interface battery-powered measurement
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন