Microchip Technology

KSZ9031RNXUA - Automotive Gigabit Ethernet PHY | Microchip

MPN: KSZ9031RNXUA ✓ সক্রিয়
10Base-T, 100Base-TX, and 1000Base-T Rds(on) 48-VFQFN with exposed pad Package 10 Mbps, 100 Mbps, and 1000 Mbps Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

KSZ9031RNXUA সারাংশ

The Microchip Technology KSZ9031RNXUA is an automotive-qualified 10/100/1000 Mbps Ethernet PHY with LinkMD cable diagnostics, RGMII timing support, and configurable on-chip delay in a 48-VFQFN exposed-pad package. It supports 10Base-T, 100Base-TX, and 1000Base-T operation for IEEE 802.3 network interfaces.

An Ethernet PHY converts between digital parallel data and signals carried over twisted-pair Ethernet cabling. The KSZ9031 belongs to the Ethernet transceiver and physical-layer hierarchy, where the RGMII interface connects a network processor or Ethernet controller to the PHY. Its integrated delay options help align RGMII timing between the controller and transceiver while reducing external timing components.

Key features include support for all three Ethernet speeds, programmable RGMII delay, on-chip delay according to RGMII version 2.0, and LinkMD cable diagnostics. The device is identified as an automotive RGMII Gigabit PHY rated to 85°C. Its 48-VFQFN package measures 7 mm by 7 mm and includes an exposed pad for improved thermal performance in compact automotive and industrial Ethernet designs.

The KSZ9031 integrates the physical-layer functions required for reliable copper-Ethernet links. Its four-pair Gigabit capability enables 1000Base-T operation, while backward compatibility with 100Base-TX and 10Base-T allows the same PHY to support slower network links. RGMII timing programmability provides a defined mechanism for adjusting interface delays without relying entirely on board-level compensation.

Typical uses include automotive Ethernet gateways, in-vehicle infotainment systems, body and chassis controllers, industrial Ethernet equipment, and network switches requiring a dedicated 10/100/1000 Mbps copper PHY. LinkMD diagnostics can assist system design and field support by identifying cable faults when implemented through the associated controller and software.

PCB design should account for the exposed thermal pad, high-speed differential routing, controlled impedance, and the separation of sensitive analog and digital circuits. Use the manufacturer pin-description table and layout guidance when assigning tracks and thermal-via arrays, and verify all RGMII delay settings against the connected Ethernet controller timing requirements.

This product page combines the confirmed automotive Ethernet PHY capabilities, package information, RGMII timing details, engineering design guidance, and clearly qualified drop-in alternatives. It also distinguishes the target ordering code from related grade and package variants so engineers can make a compatibility-focused selection before schematic release.

এর জন্য ড্রপ-ইন বিকল্প KSZ9031RNXUA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible KSZ9031RNXUA (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type, Package, Cable Type, Automotive Qualification, Cable Diagnostics.

Microchip Technology
Product Type: Ethernet Transceiver (PHY)
Package: 48-QFN (7x7 mm)
Cable Type: CAT-5 UTP
এর সাথে তুলনা করুন KSZ9031RNXUA →
Microchip Technology
Product Type: Ethernet Physical Layer Transceiver (PHY)
Package: 48-pin QFN (7x7 mm) with Exposed Pad
Cable Type: CAT-5 Unshielded Twisted Pair (UTP)
এর সাথে তুলনা করুন KSZ9031RNXUA →
Microchip Technology
Product Type: Ethernet Transceiver (PHY)
Cable Type: CAT-5 UTP
এর সাথে তুলনা করুন KSZ9031RNXUA →
Microchip Technology
Product Type: Integrated triple-speed Ethernet physical-layer transceiver
Automotive Qualification: AEC-Q100 Grade 2
এর সাথে তুলনা করুন KSZ9031RNXUA →
Microchip Technology
Product Type: Gigabit Ethernet Physical Layer Transceiver (PHY)
Package: 48-pin WQFN (lead-free)
Cable Type: CAT-5 / CAT-5e UTP
এর সাথে তুলনা করুন KSZ9031RNXUA →

KSZ9031RNXUB-TRVAO

✅ ড্রপ-ইন
Microchip Technology
📦 48-VFQFN (7 mm × 7 mm) with exposed pad
Ethernet Transceiver (PHY) · 10Base-T/100Base-TX/1000Base-T · RGMII/GMII/MII · 4/4 · Full · 1.8V, 2.5V, 3.3V · 48-pin WQFN (wettable flank) · Surface Mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031RNXIA

✅ ড্রপ-ইন
Microchip Technology
📦 48-VFQFN (7 mm × 7 mm) with exposed pad
Ethernet Transceiver (PHY) · 10/100/1000 Mbps · 10Base-T, 100Base-TX, 1000Base-T · RGMII · 1 Port · 1.8V / 2.5V / 3.3V · 3.3V · CAT-5 UTP

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031RNXVA

✅ ড্রপ-ইন
Microchip Technology
📦 48-VFQFN (7 mm × 7 mm) with exposed pad
Integrated triple-speed Ethernet physical-layer transceiver · 1 port · 10 Mbps, 100 Mbps, and 1000 Mbps · 10BASE-T, 100BASE-TX, and 1000BASE-T · RGMII · RGMII Version 2.0 with internal and external delay programming options · 1.8 V, 2.5 V, and 3.3 V · LinkMD

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031RNXVB-TRVAO

✅ ড্রপ-ইন
Microchip Technology
📦 48-VFQFN (7 mm × 7 mm) with exposed pad
Gigabit Ethernet Physical Layer Transceiver (PHY) · 10/100/1000 Mbps · 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) · RGMII v1.3 / v2.0 (HSTL selectable) · 4-pair differential, on-chip termination · CAT-5 / CAT-5e UTP · 25 MHz crystal or external oscillator · 125 MHz

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031RNXIC

✅ ড্রপ-ইন
Microchip Technology
📦 48-VFQFN (7 mm × 7 mm) with exposed pad
Ethernet Physical Layer Transceiver (PHY) · 10/100/1000 Mbps (Triple-Speed) · IEEE 802.3 10BASE-T / 100BASE-TX / 1000BASE-T · RGMII (version 2.0, on-chip delay) · 4/4 Transceiver (Full Duplex) · 1.8 V / 2.5 V / 3.3 V · 48-pin QFN (7x7 mm) with Exposed Pad · CAT-5 Unshielded Twisted Pair (UTP)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031RNXUA বিশেষণ

Product Type 10/100/1000 Mbps Ethernet PHY transceiver
Supported Ethernet Speeds 10 Mbps, 100 Mbps, and 1000 Mbps
Supported Standards 10Base-T, 100Base-TX, and 1000Base-T
Network Standard IEEE 802.3
Host Interface RGMII
RGMII Timing Support On-chip delay with programming options for external delay and adjustment
RGMII Version 2.0
Cable Diagnostics LinkMD
Automotive Qualification Automotive qualified
Automotive Temperature Grade Grade 3
Maximum Operating Temperature 85 °C
প্যাকেজ 48-VFQFN with exposed pad
Package Dimensions 7 mm × 7 mm
মাউন্টিং টাইপ Surface mount
Transceiver Configuration 4 transmit/4 receive full-duplex Ethernet transceiver

KSZ9031RNXUA 7 mm × 7 mm পিন কনফিগারেশন গাইড

KSZ9031RNXUA (7 mm × 7 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

KSZ9031RNXUA-এর জন্য 7 mm × 7 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি KSZ9031RNXUA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

KSZ9031RNXUA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Ethernet Gateway, In-Vehicle Infotainment System, Industrial Ethernet Switch, Body and Chassis Controller, Network Monitoring Equipment, Connected Sensor Gateway.

🚗

Automotive Ethernet Gateway

The KSZ9031RNXUA fits an automotive Ethernet gateway that connects an RGMII-based network processor to 10/100/1000 Mbps copper networks. Its triple-speed support allows 1000Base-T operation when the link permits it while retaining 100Base-TX and 10Base-T compatibility. RGMII version 2.0 support and programmable on-chip delay provide the timing control needed between the PHY and controller. LinkMD diagnostics can assist production testing and field diagnosis of cable faults. The Grade 3 automotive variant is identified for operation up to 85 °C, making thermal qualification and exposed-pad layout essential.

📺

In-Vehicle Infotainment System

The KSZ9031RNXUA can provide the physical Ethernet layer for an in-vehicle infotainment controller with a standardized RGMII interface. Support for 10Base-T, 100Base-TX, and 1000Base-T makes it suitable for vehicle backbones and local links operating at different negotiated rates. Its programmable RGMII delay reduces sensitivity to controller and trace timing differences, while LinkMD assists troubleshooting of installed cable assemblies. The 48-VFQFN exposed-pad package supports compact layouts, but the thermal pad must be connected and loaded according to the manufacturer layout guidance.

🏭

Industrial Ethernet Switch

The KSZ9031RNXUA is suited to a copper Ethernet port in industrial switching and control equipment using an RGMII host controller. Its 1000Base-T capability supports Gigabit links, while 100Base-TX and 10Base-T compatibility allows interoperability with slower equipment and legacy management ports. Programmable RGMII delay gives the board designer a controlled method for meeting transmit and receive timing margins. LinkMD provides a useful basis for cable testing during commissioning and maintenance. Although the target ordering code is automotive Grade 3, industrial users should confirm whether that qualification and thermal profile match their deployment requirements.

🚗

Body and Chassis Controller

The KSZ9031RNXUA can serve as the Gigabit Ethernet physical layer in a vehicle body or chassis controller. The integrated PHY supports IEEE 802.3 links at 10, 100, or 1000 Mbps and connects to a controller through RGMII, allowing diagnostic or service-network traffic to share Ethernet physical infrastructure. Its Grade 3 automotive classification and 85 °C maximum operating temperature are important for harsh vehicle environments. RGMII delay programming supports timing optimization, while the 48-VFQFN exposed pad provides a compact footprint when the PCB has adequate thermal and high-speed routing resources.

🌐

Network Monitoring Equipment

The KSZ9031RNXUA is suitable for a network test appliance or monitoring node requiring a 10/100/1000 Mbps copper connection. A single PHY can negotiate the available link speed and use RGMII to transfer data to a monitoring processor. LinkMD cable diagnostics add field-service value by helping locate faults in deployed copper links, while programmable RGMII timing permits controlled delay adjustment in multi-layer equipment. The 48-VFQFN package keeps the design compact, and its exposed pad can improve heat transfer. Production layouts should preserve controlled-impedance differential routing and the manufacturer's recommended power and ground-plane arrangement.

🧩

Connected Sensor Gateway

The KSZ9031RNXUA can serve as the Ethernet uplink in a connected sensor gateway that aggregates data from industrial or automotive sensors. Its 1000Base-T capability supports high-volume backhaul traffic, and backward compatibility with 100Base-TX and 10Base-T allows the gateway to connect to a broad range of field equipment. RGMII timing control supports deterministic communication with the host controller, while LinkMD can help technicians verify cable integrity after installation. The compact 48-VFQFN package is suitable for space-constrained enclosures, provided the exposed pad is thermally connected and differential pairs are routed with appropriate impedance control.

What is the KSZ9031RNXUA?
The KSZ9031RNXUA is an automotive-qualified 10/100/1000 Mbps Ethernet PHY from Microchip Technology. According to the manufacturer product page and KSZ9031 datasheet, it supports 10Base-T, 100Base-TX, and 1000Base-T operation, provides an RGMII interface with programmable on-chip timing delay, and includes LinkMD cable diagnostics. The device is packaged in a 48-VFQFN package with an exposed pad.
What Ethernet speeds does KSZ9031RNXUA support?
The KSZ9031RNXUA supports 10 Mbps, 100 Mbps, and 1000 Mbps Ethernet operation. The manufacturer identifies the device as a triple-speed PHY supporting 10Base-T, 100Base-TX, and 1000Base-T for IEEE 802.3 applications. This combination allows a connected controller to negotiate across 10, 100, and 1000 Mb/s copper links while retaining RGMII timing control.
Where can I download the KSZ9031RNXUA datasheet PDF?
The KSZ9031RNXUA datasheet and supporting technical documents are available through the official Microchip Technology KSZ9031 product page at https://www.microchip.com/en-us/product/KSZ9031. From that page, open the documentation section and select the KSZ9031 datasheet. The errata should also be reviewed because it lists silicon-specific corrections for identified device revisions.
Where can I find the KSZ9031RNXUA pinout?
The KSZ9031RNXUA pin assignments are documented in the pin-description table of the manufacturer KSZ9031 datasheet. The device uses a 48-VFQFN package measuring 7 mm by 7 mm with an exposed pad. Use the pin-description table for exact signal names, power pins, ground connections, and exposed-pad requirements rather than relying on a generic QFN land pattern.
What is RGMII and why does KSZ9031RNXUA support programmable delay?
RGMII is a parallel digital interface commonly used between an Ethernet controller and a 10/100/1000 Mbps PHY. The KSZ9031RNXUA supports RGMII version 2.0 and provides programming options for on-chip and external delay adjustments. According to the manufacturer datasheet, this timing control allows the transmit and receive paths to be aligned with controller and board timing requirements.
Is the KSZ9031RNXUA suitable for automotive Ethernet?
The KSZ9031RNXUA is suitable for automotive Ethernet designs requiring Grade 3 qualification. The manufacturer identifies the KSZ9031 family as automotive qualified and lists the UA and UB variants as AEC-Q100 Grade 3 parts with a maximum operating temperature of 85 °C. Its 10/100/1000 Mbps support and RGMII interface suit vehicle network controllers operating over copper Ethernet.
What does LinkMD provide on the KSZ9031RNXUA?
LinkMD provides Ethernet cable diagnostic capability within the KSZ9031 PHY. The manufacturer describes the KSZ9031 as an integrated triple-speed Ethernet PHY with LinkMD diagnostics. When used with suitable controller software and the recommended test procedure, this capability helps identify cable faults and assists commissioning, production testing, and maintenance of the physical network link.
KSZ9031RNXUA vs KSZ9031RNXIA - which is the better replacement?
The KSZ9031RNXUA is the better choice when Grade 3 automotive operation and an 85 °C maximum temperature are required; the related IA ordering code should be checked against its specific grade and qualification records before substitution. Both families use the 48-QFN Ethernet PHY format, but automotive qualification and ordering-code suffixes must match the deployment. Verify pin, temperature, and qualification requirements in the manufacturer documentation.
KSZ9031RNXUA vs KSZ9031RNXVA - can the VA part replace the UA part?
The KSZ9031RNXVA should not replace the KSZ9031RNXUA without confirming temperature-grade requirements. The manufacturer identifies UA and UB as Grade 3 automotive variants rated to 85 °C, while VA and VB are Grade 2 variants. Although the devices share the KSZ9031RNX 48-pin QFN format, a Grade 2 part may not satisfy a Grade 3 automotive qualification requirement.
When should I choose KSZ9031RNXUA over another KSZ9031RNX variant?
Choose the KSZ9031RNXUA when the design requires the Grade 3 automotive version of the KSZ9031 Ethernet PHY and can operate within the stated 85 °C maximum temperature. Select a Grade 2 alternative only when its thermal and qualification limits meet the system requirement. The package and RGMII architecture may be shared, but lifecycle, qualification, temperature, and purchasing configuration should still be confirmed.
Is KSZ9031RNXUA suitable for industrial Ethernet equipment?
The KSZ9031RNXUA is technically suitable for industrial Ethernet equipment that uses a compatible RGMII controller and requires the 10/100/1000 Mbps PHY functions. Its 48-VFQFN package, exposed pad, programmable RGMII timing, and LinkMD diagnostics are useful in compact control equipment. Because the exact suffix carries automotive Grade 3 characteristics, confirm the industrial thermal requirement and operating-temperature policy before production release.
What can replace KSZ9031RNXUA?
The closest drop-in choices are qualified ordering variants of the Microchip KSZ9031RNX family that retain the 48-VFQFN footprint and compatible RGMII interface. The principal selection issue is automotive temperature grade rather than a change in Ethernet speed. KSZ9031RNXUB, KSZ9031RNXIA, KSZ9031RNXVA, KSZ9031RNXVB, and KSZ9031RNXIC can be evaluated as same-family drop-in candidates, subject to a final qualification and pin-function review.
Is KSZ9031RNXUA the same as KSZ9031RNXUB?
The KSZ9031RNXUA and KSZ9031RNXUB are closely related Grade 3 variants of the same 48-pin KSZ9031RNX Ethernet PHY family. Both are identified in the manufacturer information as AEC-Q100 Grade 3 automotive parts rated to 85 °C. They are therefore a strong same-package replacement option, but ordering suffixes can encode additional release or configuration details, so the manufacturer ordering table must be checked before substitution.
Where can I buy KSZ9031RNXUA online?
Use the Request a Quote form on this page to request KSZ9031RNXUA availability, current lead time, and purchasing terms. The form routes the request through XAIPART's normal quotation workflow and avoids static pricing that can become outdated. Provide the target quantity, reel or tray packaging preference, and required delivery location so the manufacturer configuration can be matched accurately.
What is the lead time for KSZ9031RNXUA?
Current lead time for the KSZ9031RNXUA should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, packaging format, and destination, so a fixed delivery interval would be unreliable. Include your required quantity and production schedule, and request a written delivery commitment before placing the order.
What are the key specifications of KSZ9031RNXUA that engineers should know?
The KSZ9031RNXUA is a 10/100/1000 Mbps Ethernet PHY in a 48-VFQFN 7 mm by 7 mm package with an exposed pad. It supports 10Base-T, 100Base-TX, and 1000Base-T, provides RGMII version 2.0 timing control with programmable on-chip delay, includes LinkMD cable diagnostics, and is an automotive Grade 3 device rated to 85 °C. These characteristics define its primary Ethernet, timing, diagnostic, thermal, and footprint constraints.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা KSZ9031RNXUA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the KSZ9031RNXUA when the design requires Microchip's Grade 3 automotive KSZ9031 Ethernet PHY with 10/100/1000 Mbps support, RGMII version 2.0 timing control, LinkMD diagnostics, and an 85 °C maximum operating temperature. KSZ9031RNXUB is the closest same-grade option and should be selected when the ordering table confirms that it satisfies the required configuration. KSZ9031RNXIA and KSZ9031RNXIC are same-family candidates for which suffix-specific qualification and temperature details must be checked. KSZ9031RNXVA and KSZ9031RNXVB are Grade 2 choices and therefore may not satisfy a Grade 3 requirement even though they share the 48-VFQFN footprint. For every candidate, verify the pin-description table, RGMII delay configuration, exposed-pad layout, lifecycle status, and errata before releasing a production design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য KSZ9031RNXUB KSZ9031RNXIA KSZ9031RNXVA KSZ9031RNXVB KSZ9031RNXIC
Package 48-VFQFN (7 mm × 7 mm) with exposed pad 48-VFQFN (7 mm × 7 mm) with exposed pad 48-VFQFN (7 mm × 7 mm) with exposed pad 48-VFQFN (7 mm × 7 mm) with exposed pad 48-VFQFN (7 mm × 7 mm) with exposed pad 48-VFQFN (7 mm × 7 mm) with exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Supported Ethernet Speeds 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps
Ethernet Media Types 10Base-T, 100Base-TX, and 1000Base-T 10Base-T, 100Base-TX, and 1000Base-T 10Base-T, 100Base-TX, and 1000Base-T 10Base-T, 100Base-TX, and 1000Base-T 10Base-T, 100Base-TX, and 1000Base-T 10Base-T, 100Base-TX, and 1000Base-T
Host Interface RGMII RGMII RGMII RGMII RGMII RGMII
Cable Diagnostics LinkMD LinkMD LinkMD LinkMD LinkMD LinkMD
RGMII Delay Control Programmable on-chip and external-delay adjustment Programmable delay support Programmable delay support Programmable delay support Programmable delay support Programmable delay support

মূল পার্থক্যসমূহ

  • Grade 3 automotive temperature capability (বনামKSZ9031RNXVA)
  • Triple-speed copper Ethernet in one PHY (বনামKSZ9031RNXVB)
  • Integrated RGMII timing control and diagnostics (বনামKSZ9031RNXIA)

ডিজাইন নোট

Use the manufacturer pin-description table and layout guidance for the 48-VFQFN exposed-pad footprint. Place input and output decoupling capacitors close to their assigned power pins, provide a low-impedance ground connection, and stitch the exposed thermal pad to the appropriate ground plane with a via array. Confirm the final land pattern against the current package drawing because exposed-pad geometry and pin numbering must match the PCB library.

Treat the Ethernet differential pairs as controlled-impedance high-speed nets. Keep the 1000Base-T pair geometry consistent, minimize stubs and unnecessary vias, and avoid routing them through noisy power or digital regions. Keep the PHY and magnetics interface area compact while separating sensitive clock and data-routing regions from switching nodes. Apply the manufacturer's reference-layout recommendations for RGMII traces and copper keepouts.

RGMII timing depends on controller output timing, trace length, PHY input delay, and the configured on-chip delay. Establish the required delay budget early, use the manufacturer's recommended register settings, and verify both transmit and receive directions at the intended temperature and Ethernet link speed. Avoid assuming that identical-looking package variants use identical delay defaults; validate each replacement ordering code in hardware.

The exposed pad is part of the thermal strategy, not merely a ground connection. Use the manufacturer's recommended thermal via pattern and connect the pad to a suitable copper area. For an automotive enclosure, route heat from the pad into the PCB structure without compromising return paths beneath the high-speed interface. Validate junction temperature and enclosure temperature with the actual airflow, copper area, and surrounding components.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The KSZ9031RNXUA is identified as an AEC-Q100 Grade 3 automotive variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not confirmed by the retrieved manufacturer page snippets.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

KSZ9031RNXUA datasheet KSZ9031RNXUA pinout KSZ9031RNXUA datasheet pdf KSZ9031RNXUA equivalent KSZ9031RNXUA replacement KSZ9031RNXUA vs KSZ9031RNXUB KSZ9031RNXUA price KSZ9031RNXUA stock Microchip KSZ9031RNXUA KSZ9031RNXUA RGMII delay KSZ9031RNXUA 48-VFQFN KSZ9031RNXUA automotive Ethernet KSZ9031RNXUA LinkMD diagnostics KSZ9031RNXUA footprint KSZ9031RNXUA application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology KSZ9031RNXUA KSZ9031RNXUB KSZ9031RNXIA KSZ9031RNXVA KSZ9031RNXVB KSZ9031RNXIC Ethernet PHY physical layer Ethernet transceiver RGMII LinkMD 10Base-T 100Base-TX 1000Base-T IEEE 802.3 automotive Ethernet AEC-Q100 Grade 3 48-VFQFN QFN family surface mount exposed pad programmable delay cable diagnostics
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন