KSZ9031RNXUA - Automotive Gigabit Ethernet PHY | Microchip
부품 번호: KSZ9031RNXUA ✓ 활성KSZ9031RNXUA 개요
An Ethernet PHY converts between digital parallel data and signals carried over twisted-pair Ethernet cabling. The KSZ9031 belongs to the Ethernet transceiver and physical-layer hierarchy, where the RGMII interface connects a network processor or Ethernet controller to the PHY. Its integrated delay options help align RGMII timing between the controller and transceiver while reducing external timing components.
Key features include support for all three Ethernet speeds, programmable RGMII delay, on-chip delay according to RGMII version 2.0, and LinkMD cable diagnostics. The device is identified as an automotive RGMII Gigabit PHY rated to 85°C. Its 48-VFQFN package measures 7 mm by 7 mm and includes an exposed pad for improved thermal performance in compact automotive and industrial Ethernet designs.
The KSZ9031 integrates the physical-layer functions required for reliable copper-Ethernet links. Its four-pair Gigabit capability enables 1000Base-T operation, while backward compatibility with 100Base-TX and 10Base-T allows the same PHY to support slower network links. RGMII timing programmability provides a defined mechanism for adjusting interface delays without relying entirely on board-level compensation.
Typical uses include automotive Ethernet gateways, in-vehicle infotainment systems, body and chassis controllers, industrial Ethernet equipment, and network switches requiring a dedicated 10/100/1000 Mbps copper PHY. LinkMD diagnostics can assist system design and field support by identifying cable faults when implemented through the associated controller and software.
PCB design should account for the exposed thermal pad, high-speed differential routing, controlled impedance, and the separation of sensitive analog and digital circuits. Use the manufacturer pin-description table and layout guidance when assigning tracks and thermal-via arrays, and verify all RGMII delay settings against the connected Ethernet controller timing requirements.
This product page combines the confirmed automotive Ethernet PHY capabilities, package information, RGMII timing details, engineering design guidance, and clearly qualified drop-in alternatives. It also distinguishes the target ordering code from related grade and package variants so engineers can make a compatibility-focused selection before schematic release.
드롭인 대체품: KSZ9031RNXUA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: KSZ9031RNXUA (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Cable Type, Automotive Qualification, Cable Diagnostics.
KSZ9031RNXUB-TRVAO
✅ 드롭인가격 문의
데이터시트 보기 →KSZ9031RNXIA
✅ 드롭인가격 문의
데이터시트 보기 →KSZ9031RNXVA
✅ 드롭인가격 문의
데이터시트 보기 →KSZ9031RNXVB-TRVAO
✅ 드롭인가격 문의
데이터시트 보기 →KSZ9031RNXIC
✅ 드롭인가격 문의
데이터시트 보기 →KSZ9031RNXUA 사양
| Product Type | 10/100/1000 Mbps Ethernet PHY transceiver |
| Supported Ethernet Speeds | 10 Mbps, 100 Mbps, and 1000 Mbps |
| Supported Standards | 10Base-T, 100Base-TX, and 1000Base-T |
| Network Standard | IEEE 802.3 |
| Host Interface | RGMII |
| RGMII Timing Support | On-chip delay with programming options for external delay and adjustment |
| RGMII Version | 2.0 |
| Cable Diagnostics | LinkMD |
| Automotive Qualification | Automotive qualified |
| Automotive Temperature Grade | Grade 3 |
| Maximum Operating Temperature | 85 °C |
| 패키지 | 48-VFQFN with exposed pad |
| Package Dimensions | 7 mm × 7 mm |
| 실장 유형 | Surface mount |
| Transceiver Configuration | 4 transmit/4 receive full-duplex Ethernet transceiver |
KSZ9031RNXUA 7 mm × 7 mm 핀 구성 가이드
KSZ9031RNXUA(7 mm × 7 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: KSZ9031RNXUA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
KSZ9031RNXUA 적합 용도: 6 애플리케이션s: Automotive Ethernet Gateway, In-Vehicle Infotainment System, Industrial Ethernet Switch, Body and Chassis Controller, Network Monitoring Equipment, Connected Sensor Gateway.
Automotive Ethernet Gateway
The KSZ9031RNXUA fits an automotive Ethernet gateway that connects an RGMII-based network processor to 10/100/1000 Mbps copper networks. Its triple-speed support allows 1000Base-T operation when the link permits it while retaining 100Base-TX and 10Base-T compatibility. RGMII version 2.0 support and programmable on-chip delay provide the timing control needed between the PHY and controller. LinkMD diagnostics can assist production testing and field diagnosis of cable faults. The Grade 3 automotive variant is identified for operation up to 85 °C, making thermal qualification and exposed-pad layout essential.
추천
In-Vehicle Infotainment System
The KSZ9031RNXUA can provide the physical Ethernet layer for an in-vehicle infotainment controller with a standardized RGMII interface. Support for 10Base-T, 100Base-TX, and 1000Base-T makes it suitable for vehicle backbones and local links operating at different negotiated rates. Its programmable RGMII delay reduces sensitivity to controller and trace timing differences, while LinkMD assists troubleshooting of installed cable assemblies. The 48-VFQFN exposed-pad package supports compact layouts, but the thermal pad must be connected and loaded according to the manufacturer layout guidance.
추천
Industrial Ethernet Switch
The KSZ9031RNXUA is suited to a copper Ethernet port in industrial switching and control equipment using an RGMII host controller. Its 1000Base-T capability supports Gigabit links, while 100Base-TX and 10Base-T compatibility allows interoperability with slower equipment and legacy management ports. Programmable RGMII delay gives the board designer a controlled method for meeting transmit and receive timing margins. LinkMD provides a useful basis for cable testing during commissioning and maintenance. Although the target ordering code is automotive Grade 3, industrial users should confirm whether that qualification and thermal profile match their deployment requirements.
추천
Body and Chassis Controller
The KSZ9031RNXUA can serve as the Gigabit Ethernet physical layer in a vehicle body or chassis controller. The integrated PHY supports IEEE 802.3 links at 10, 100, or 1000 Mbps and connects to a controller through RGMII, allowing diagnostic or service-network traffic to share Ethernet physical infrastructure. Its Grade 3 automotive classification and 85 °C maximum operating temperature are important for harsh vehicle environments. RGMII delay programming supports timing optimization, while the 48-VFQFN exposed pad provides a compact footprint when the PCB has adequate thermal and high-speed routing resources.
추천
Network Monitoring Equipment
The KSZ9031RNXUA is suitable for a network test appliance or monitoring node requiring a 10/100/1000 Mbps copper connection. A single PHY can negotiate the available link speed and use RGMII to transfer data to a monitoring processor. LinkMD cable diagnostics add field-service value by helping locate faults in deployed copper links, while programmable RGMII timing permits controlled delay adjustment in multi-layer equipment. The 48-VFQFN package keeps the design compact, and its exposed pad can improve heat transfer. Production layouts should preserve controlled-impedance differential routing and the manufacturer's recommended power and ground-plane arrangement.
추천
Connected Sensor Gateway
The KSZ9031RNXUA can serve as the Ethernet uplink in a connected sensor gateway that aggregates data from industrial or automotive sensors. Its 1000Base-T capability supports high-volume backhaul traffic, and backward compatibility with 100Base-TX and 10Base-T allows the gateway to connect to a broad range of field equipment. RGMII timing control supports deterministic communication with the host controller, while LinkMD can help technicians verify cable integrity after installation. The compact 48-VFQFN package is suitable for space-constrained enclosures, provided the exposed pad is thermally connected and differential pairs are routed with appropriate impedance control.
추천
추천 제품 요약
엔지니어링 참조 데이터: KSZ9031RNXUA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | KSZ9031RNXUB | KSZ9031RNXIA | KSZ9031RNXVA | KSZ9031RNXVB | KSZ9031RNXIC |
|---|---|---|---|---|---|---|
| Package | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Supported Ethernet Speeds | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Ethernet Media Types | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T |
| Host Interface | RGMII | RGMII | RGMII | RGMII | RGMII | RGMII |
| Cable Diagnostics | LinkMD | LinkMD | LinkMD | LinkMD | LinkMD | LinkMD |
| RGMII Delay Control | Programmable on-chip and external-delay adjustment | Programmable delay support | Programmable delay support | Programmable delay support | Programmable delay support | Programmable delay support |
주요 차별점
- Grade 3 automotive temperature capability (vs KSZ9031RNXVA)
- Triple-speed copper Ethernet in one PHY (vs KSZ9031RNXVB)
- Integrated RGMII timing control and diagnostics (vs KSZ9031RNXIA)
설계 노트
Use the manufacturer pin-description table and layout guidance for the 48-VFQFN exposed-pad footprint. Place input and output decoupling capacitors close to their assigned power pins, provide a low-impedance ground connection, and stitch the exposed thermal pad to the appropriate ground plane with a via array. Confirm the final land pattern against the current package drawing because exposed-pad geometry and pin numbering must match the PCB library.
Treat the Ethernet differential pairs as controlled-impedance high-speed nets. Keep the 1000Base-T pair geometry consistent, minimize stubs and unnecessary vias, and avoid routing them through noisy power or digital regions. Keep the PHY and magnetics interface area compact while separating sensitive clock and data-routing regions from switching nodes. Apply the manufacturer's reference-layout recommendations for RGMII traces and copper keepouts.
RGMII timing depends on controller output timing, trace length, PHY input delay, and the configured on-chip delay. Establish the required delay budget early, use the manufacturer's recommended register settings, and verify both transmit and receive directions at the intended temperature and Ethernet link speed. Avoid assuming that identical-looking package variants use identical delay defaults; validate each replacement ordering code in hardware.
The exposed pad is part of the thermal strategy, not merely a ground connection. Use the manufacturer's recommended thermal via pattern and connect the pad to a suitable copper area. For an automotive enclosure, route heat from the pad into the PCB structure without compromising return paths beneath the high-speed interface. Validate junction temperature and enclosure temperature with the actual airflow, copper area, and surrounding components.
규정 준수 정보
The KSZ9031RNXUA is identified as an AEC-Q100 Grade 3 automotive variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not confirmed by the retrieved manufacturer page snippets.