KSZ9031RNXUA - Automotive Gigabit Ethernet PHY | Microchip
MPN: KSZ9031RNXUA ✓ 啟用中KSZ9031RNXUA 概覽
An Ethernet PHY converts between digital parallel data and signals carried over twisted-pair Ethernet cabling. The KSZ9031 belongs to the Ethernet transceiver and physical-layer hierarchy, where the RGMII interface connects a network processor or Ethernet controller to the PHY. Its integrated delay options help align RGMII timing between the controller and transceiver while reducing external timing components.
Key features include support for all three Ethernet speeds, programmable RGMII delay, on-chip delay according to RGMII version 2.0, and LinkMD cable diagnostics. The device is identified as an automotive RGMII Gigabit PHY rated to 85°C. Its 48-VFQFN package measures 7 mm by 7 mm and includes an exposed pad for improved thermal performance in compact automotive and industrial Ethernet designs.
The KSZ9031 integrates the physical-layer functions required for reliable copper-Ethernet links. Its four-pair Gigabit capability enables 1000Base-T operation, while backward compatibility with 100Base-TX and 10Base-T allows the same PHY to support slower network links. RGMII timing programmability provides a defined mechanism for adjusting interface delays without relying entirely on board-level compensation.
Typical uses include automotive Ethernet gateways, in-vehicle infotainment systems, body and chassis controllers, industrial Ethernet equipment, and network switches requiring a dedicated 10/100/1000 Mbps copper PHY. LinkMD diagnostics can assist system design and field support by identifying cable faults when implemented through the associated controller and software.
PCB design should account for the exposed thermal pad, high-speed differential routing, controlled impedance, and the separation of sensitive analog and digital circuits. Use the manufacturer pin-description table and layout guidance when assigning tracks and thermal-via arrays, and verify all RGMII delay settings against the connected Ethernet controller timing requirements.
This product page combines the confirmed automotive Ethernet PHY capabilities, package information, RGMII timing details, engineering design guidance, and clearly qualified drop-in alternatives. It also distinguishes the target ordering code from related grade and package variants so engineers can make a compatibility-focused selection before schematic release.
直接替換替代品,適用於 KSZ9031RNXUA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: KSZ9031RNXUA (相同外形與佔位) — 差異在於 Product Type, Package, Cable Type, Automotive Qualification, Cable Diagnostics.
KSZ9031RNXUB-TRVAO
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031RNXIA
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031RNXVA
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031RNXVB-TRVAO
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031RNXIC
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031RNXUA 規格
| Product Type | 10/100/1000 Mbps Ethernet PHY transceiver |
| Supported Ethernet Speeds | 10 Mbps, 100 Mbps, and 1000 Mbps |
| Supported Standards | 10Base-T, 100Base-TX, and 1000Base-T |
| Network Standard | IEEE 802.3 |
| Host Interface | RGMII |
| RGMII Timing Support | On-chip delay with programming options for external delay and adjustment |
| RGMII Version | 2.0 |
| Cable Diagnostics | LinkMD |
| Automotive Qualification | Automotive qualified |
| Automotive Temperature Grade | Grade 3 |
| Maximum Operating Temperature | 85 °C |
| 封裝 | 48-VFQFN with exposed pad |
| Package Dimensions | 7 mm × 7 mm |
| 安裝類型 | Surface mount |
| Transceiver Configuration | 4 transmit/4 receive full-duplex Ethernet transceiver |
KSZ9031RNXUA 7 mm × 7 mm 腳位配置指南
KSZ9031RNXUA(7 mm × 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: KSZ9031RNXUA.
請參閱 資料表 以查看完整腳位配置。
典型應用
KSZ9031RNXUA 適用於 6 應用s: Automotive Ethernet Gateway, In-Vehicle Infotainment System, Industrial Ethernet Switch, Body and Chassis Controller, Network Monitoring Equipment, Connected Sensor Gateway.
Automotive Ethernet Gateway
The KSZ9031RNXUA fits an automotive Ethernet gateway that connects an RGMII-based network processor to 10/100/1000 Mbps copper networks. Its triple-speed support allows 1000Base-T operation when the link permits it while retaining 100Base-TX and 10Base-T compatibility. RGMII version 2.0 support and programmable on-chip delay provide the timing control needed between the PHY and controller. LinkMD diagnostics can assist production testing and field diagnosis of cable faults. The Grade 3 automotive variant is identified for operation up to 85 °C, making thermal qualification and exposed-pad layout essential.
推薦
In-Vehicle Infotainment System
The KSZ9031RNXUA can provide the physical Ethernet layer for an in-vehicle infotainment controller with a standardized RGMII interface. Support for 10Base-T, 100Base-TX, and 1000Base-T makes it suitable for vehicle backbones and local links operating at different negotiated rates. Its programmable RGMII delay reduces sensitivity to controller and trace timing differences, while LinkMD assists troubleshooting of installed cable assemblies. The 48-VFQFN exposed-pad package supports compact layouts, but the thermal pad must be connected and loaded according to the manufacturer layout guidance.
推薦
Industrial Ethernet Switch
The KSZ9031RNXUA is suited to a copper Ethernet port in industrial switching and control equipment using an RGMII host controller. Its 1000Base-T capability supports Gigabit links, while 100Base-TX and 10Base-T compatibility allows interoperability with slower equipment and legacy management ports. Programmable RGMII delay gives the board designer a controlled method for meeting transmit and receive timing margins. LinkMD provides a useful basis for cable testing during commissioning and maintenance. Although the target ordering code is automotive Grade 3, industrial users should confirm whether that qualification and thermal profile match their deployment requirements.
推薦
Body and Chassis Controller
The KSZ9031RNXUA can serve as the Gigabit Ethernet physical layer in a vehicle body or chassis controller. The integrated PHY supports IEEE 802.3 links at 10, 100, or 1000 Mbps and connects to a controller through RGMII, allowing diagnostic or service-network traffic to share Ethernet physical infrastructure. Its Grade 3 automotive classification and 85 °C maximum operating temperature are important for harsh vehicle environments. RGMII delay programming supports timing optimization, while the 48-VFQFN exposed pad provides a compact footprint when the PCB has adequate thermal and high-speed routing resources.
推薦
Network Monitoring Equipment
The KSZ9031RNXUA is suitable for a network test appliance or monitoring node requiring a 10/100/1000 Mbps copper connection. A single PHY can negotiate the available link speed and use RGMII to transfer data to a monitoring processor. LinkMD cable diagnostics add field-service value by helping locate faults in deployed copper links, while programmable RGMII timing permits controlled delay adjustment in multi-layer equipment. The 48-VFQFN package keeps the design compact, and its exposed pad can improve heat transfer. Production layouts should preserve controlled-impedance differential routing and the manufacturer's recommended power and ground-plane arrangement.
推薦
Connected Sensor Gateway
The KSZ9031RNXUA can serve as the Ethernet uplink in a connected sensor gateway that aggregates data from industrial or automotive sensors. Its 1000Base-T capability supports high-volume backhaul traffic, and backward compatibility with 100Base-TX and 10Base-T allows the gateway to connect to a broad range of field equipment. RGMII timing control supports deterministic communication with the host controller, while LinkMD can help technicians verify cable integrity after installation. The compact 48-VFQFN package is suitable for space-constrained enclosures, provided the exposed pad is thermally connected and differential pairs are routed with appropriate impedance control.
推薦
推薦產品摘要
工程參考資料,適用於 KSZ9031RNXUA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | KSZ9031RNXUB | KSZ9031RNXIA | KSZ9031RNXVA | KSZ9031RNXVB | KSZ9031RNXIC |
|---|---|---|---|---|---|---|
| Package | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad | 48-VFQFN (7 mm × 7 mm) with exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Supported Ethernet Speeds | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Ethernet Media Types | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T | 10Base-T, 100Base-TX, and 1000Base-T |
| Host Interface | RGMII | RGMII | RGMII | RGMII | RGMII | RGMII |
| Cable Diagnostics | LinkMD | LinkMD | LinkMD | LinkMD | LinkMD | LinkMD |
| RGMII Delay Control | Programmable on-chip and external-delay adjustment | Programmable delay support | Programmable delay support | Programmable delay support | Programmable delay support | Programmable delay support |
主要差異化特點
- Grade 3 automotive temperature capability (對比KSZ9031RNXVA)
- Triple-speed copper Ethernet in one PHY (對比KSZ9031RNXVB)
- Integrated RGMII timing control and diagnostics (對比KSZ9031RNXIA)
設計說明
Use the manufacturer pin-description table and layout guidance for the 48-VFQFN exposed-pad footprint. Place input and output decoupling capacitors close to their assigned power pins, provide a low-impedance ground connection, and stitch the exposed thermal pad to the appropriate ground plane with a via array. Confirm the final land pattern against the current package drawing because exposed-pad geometry and pin numbering must match the PCB library.
Treat the Ethernet differential pairs as controlled-impedance high-speed nets. Keep the 1000Base-T pair geometry consistent, minimize stubs and unnecessary vias, and avoid routing them through noisy power or digital regions. Keep the PHY and magnetics interface area compact while separating sensitive clock and data-routing regions from switching nodes. Apply the manufacturer's reference-layout recommendations for RGMII traces and copper keepouts.
RGMII timing depends on controller output timing, trace length, PHY input delay, and the configured on-chip delay. Establish the required delay budget early, use the manufacturer's recommended register settings, and verify both transmit and receive directions at the intended temperature and Ethernet link speed. Avoid assuming that identical-looking package variants use identical delay defaults; validate each replacement ordering code in hardware.
The exposed pad is part of the thermal strategy, not merely a ground connection. Use the manufacturer's recommended thermal via pattern and connect the pad to a suitable copper area. For an automotive enclosure, route heat from the pad into the PCB structure without compromising return paths beneath the high-speed interface. Validate junction temperature and enclosure temperature with the actual airflow, copper area, and surrounding components.
合規資訊
The KSZ9031RNXUA is identified as an AEC-Q100 Grade 3 automotive variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not confirmed by the retrieved manufacturer page snippets.