Texas Instruments

LM224KDG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments

MPN: LM224KDG4 ✓ সক্রিয়
30 V Vdss 14-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM224KDG4 সারাংশ

The Texas Instruments LM224KDG4 is a quad operational amplifier with four independent, internally frequency-compensated amplifiers, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and a 14-pin SOIC package. It is intended for general-purpose industrial signal conditioning where four amplifiers are needed in one package. According to the Texas Instruments product page, the LM224K family provides improved ESD protection of 2 kV and operates from -25 °C to +85 °C.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify small voltage differences. The LM224 belongs to the operational-amplifier hierarchy and provides four amplifier channels in one quad package. Each channel can amplify sensor, audio, or feedback signals independently. Internal frequency compensation makes the devices suitable for closed-loop designs without external compensation networks, although the available datasheet information should guide stability and unity-gain layout decisions.

The LM224KDG4 combines four general-purpose amplifier channels with a maximum supply voltage of 30 V. Its 1.2 MHz gain-bandwidth product supports signal paths extending from low-frequency measurement circuits to moderate-bandwidth audio and control applications. The reported input offset voltage is 3 mV, a parameter that contributes to DC error when the amplifier operates near its input limits or in precision current-feedback measurements.

The K suffix identifies an industrial temperature grade covering -25 °C to +85 °C. The four circuits share a common supply arrangement but otherwise operate independently, allowing one package to implement summing, buffering, amplification, filtering, or current-feedback stages. A listing identifies the device as a 14-SOIC surface-mount part with gull-wing terminals, while the ordering code G4 denotes its supplied packaging configuration.

Typical uses include industrial process-signal conditioning, low-frequency sensor interfaces, audio preamplification, feedback networks in power converters, and general control systems. Four channels in one package can reduce PCB area and simplify multi-amplifier analog boards. The 30 V supply capability also accommodates industrial rails higher than conventional 5 V or 12 V systems, subject to the common-mode and output-swing limits stated in the manufacturer datasheet.

PCB layout should keep input, feedback, and decoupling connections short, place the bypass capacitor close to the supply pins, and route sensitive input nodes away from switching and high-current paths. Because the LM224K is not rail-to-rail, verify input and output voltage ranges before choosing it for single-supply sensing near ground. This page combines package, temperature, bandwidth, and cross-reference information with practical guidance for evaluating same-footprint replacements.

এর জন্য ড্রপ-ইন বিকল্প LM224KDG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM224KDG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.

LM224KAD

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC
General-purpose operational amplifier · 4 channels · 3 V to 32 V · ±16 V · 1.2 MHz · 2 kV · 14-pin SOIC · 14 pins

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM224KDR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 14-pin SOIC
Quad general-purpose operational amplifier · 4 circuits · 30 V · 1.2 MHz · 2 kV · -25°C to +85°C · 14-pin SOIC (D) · 0.154 in (3.90 mm)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM224KP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 14-pin SOIC
Same LM224K 30 V, 1.2 MHz, and four-channel architecture; the documented core ratings differ by 0%.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM224DR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 14-pin SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ স্টকে আছে

$0.1641 / ইউনিট

ডেটাশিট দেখুন →

LM224D

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 14-pin SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM224KDG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 circuits
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 3 mV
ESD Protection 2 kV
অপারেটিং তাপমাত্রার পরিসর -25 °C to +85 °C
প্যাকেজ 14-pin SOIC
Terminal Count 14 terminals
মাউন্টিং টাইপ Surface mount
Terminal Form Gull wing
Package Shape Rectangular
RoHS স্ট্যাটাস unknown
REACH Status unknown
AEC-Q100 Qualification unknown

LM224KDG4 rectangular পিন কনফিগারেশন গাইড

LM224KDG4 (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

LM224KDG4-এর জন্য rectangular প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LM224KDG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LM224KDG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Audio Preamplification, Power Supply Feedback Control, Process Control Loops, Data Acquisition Front Ends, Motor and Actuator Control.

🏭

Industrial Sensor Signal Conditioning

The LM224KDG4 is well suited to conditioning low-level industrial sensor signals because its four independent channels can amplify, buffer, and stage multiple inputs within one 14-pin SOIC package. The 1.2 MHz gain-bandwidth product provides useful bandwidth for common temperature, pressure, and position sensing paths, while the 30 V supply rating supports higher-voltage industrial control systems. Use two channels for sensor conditioning and the remaining channels for reference buffering or active filtering. Verify the input common-mode range against the sensor output because this general-purpose amplifier is not specified as rail-to-rail.

🎧

Audio Preamplification

The LM224KDG4 can implement four moderate-bandwidth audio preamplifier or mixer channels in a compact circuit. Its 1.2 MHz gain-bandwidth product is substantially above typical audio-bandwidth requirements, and the quad configuration allows left and right channels to be amplified while the other channels support gain or buffer stages. The 30 V maximum supply rating permits operation from elevated single rails when the circuit and output-swing requirements permit it. Because the device is not rail-to-rail, the designer should check output swing and input bias behavior in the selected gain network.

⚡

Power Supply Feedback Control

The LM224KDG4 can provide error amplification and feedback functions in industrial power-control systems because four channels are available in one package. Its 1.2 MHz bandwidth is suitable for moderate-speed feedback loops and its 30 V supply rating allows connection to higher-voltage control circuitry where appropriate. A practical allocation might use one channel for the error amplifier, one for output-voltage buffering, and two for current sensing or fault-path conditioning. The final loop compensation and stability network must be selected using the LM224K datasheet and the power-stage characteristics.

🏭

Process Control Loops

The LM224KDG4 fits process-control boards that require several conditioning channels around a controller. Each of the four amplifiers can handle a separate sensor input, actuator feedback signal, or buffered reference within a system operating from an elevated industrial rail. The 30 V maximum supply rating and -25 °C to +85 °C operating range align with many factory environments, while the 1.2 MHz gain-bandwidth product covers many slow control signals. Common-mode range, output swing, and stability must be checked for every loop rather than inferred from the family headline specifications.

🖥️

Data Acquisition Front Ends

The LM224KDG4 can implement multiple input-buffer or gain stages ahead of an analog-to-digital converter in a low-frequency data-acquisition system. Four channels in one 14-pin SOIC reduce package count, and 1.2 MHz bandwidth is adequate for many temperature, pressure, and instrumentation signals rather than high-speed waveform capture. Use short feedback paths and verify settling behavior at the required gain. The amplifier should be bypassed close to its supply pins, and sensitive inputs should remain away from switching regulators and digital clock lines to minimize coupled noise.

🔧

Motor and Actuator Control

The LM224KDG4 can provide error amplification, current-loop feedback, and input conditioning around industrial actuator-control circuits. Its quad organization makes it practical to implement several related analog functions in a compact controller, and its 30 V supply rating accommodates elevated control rails better than standard 5 V-only devices. The 1.2 MHz bandwidth is appropriate for many low- and moderate-bandwidth actuator loops. Designers must verify output current, output swing, input common-mode limits, and stability, and should keep power-stage switching nodes separated from sensitive amplifier inputs.

What is the LM224KDG4?
The LM224KDG4 is a Texas Instruments quad general-purpose operational amplifier containing four independent, internally frequency-compensated amplifiers in a 14-pin SOIC package. According to the manufacturer product page, the device supports a maximum supply voltage of 30 V, has a 1.2 MHz gain-bandwidth product, and is intended for general-purpose industrial signal-conditioning circuits.
What is the operating voltage of LM224KDG4?
The LM224KDG4 supports operation up to a 30 V maximum supply voltage. The exact minimum supply voltage and usable input and output common-mode limits must be taken from the LM224K manufacturer datasheet for the selected circuit configuration. This is a single-supply operational-amplifier family, but the 30 V rating does not mean every input or output can swing across the full supply range.
What is the gain-bandwidth product of LM224KDG4?
The LM224KDG4 has a gain-bandwidth product of 1.2 MHz. This figure determines the approximate closed-loop bandwidth at different noise gains, so a 10-times noise-gain configuration has roughly one-tenth of the gain-bandwidth product available for signal bandwidth. The Texas Instruments LM224K product page identifies the 1.2 MHz value as a principal family specification.
What is the temperature range of LM224KDG4?
The LM224KDG4 operates from -25 °C to +85 °C. Texas Instruments describes the LM224K as an industrial-temperature-grade device, and distributor records identify the target as a 14-SOIC quad operational amplifier. For designs exposed to temperatures below -25 °C or above +85 °C, select a device whose specified junction or ambient range covers the complete operating envelope.
Where can I download the LM224KDG4 datasheet PDF?
The official LM224K product and support page is https://www.ti.com/product/LM224K, where Texas Instruments provides ordering information, parameters, quality data, and datasheet access for the family. Use the LM224KDG4 orderable-device information and LM224K datasheet to confirm the K temperature grade, SOIC package, electrical limits, and pin configuration before releasing the PCB.
Where can I find the LM224KDG4 pinout?
The LM224KDG4 pinout is defined in the LM224K manufacturer datasheet because all four amplifiers share supply pins in a standard 14-pin SOIC footprint. Use the pin-description table and package drawing in that document when assigning traces. The 14-terminal SOIC package information is also confirmed by distributor and cross-reference listings for the target MPN.
Is LM224KDG4 suitable for industrial applications?
Yes. The LM224KDG4 is rated for -25 °C to +85 °C operation and is specified as a general-purpose quad amplifier with improved 2 kV ESD protection. Its 30 V supply rating is useful in industrial equipment operating above conventional 5 V or 12 V rails, but the design must still satisfy the datasheet limits for input common-mode voltage, output swing, supply current, and channel behavior.
What can replace the LM224KDG4?
The LM224KAD is a documented same-package replacement candidate for LM224KDG4 because its 14-pin SOIC terminals, 1.2 MHz bandwidth, four-channel configuration, and principal performance characteristics are reported as consistent. Other LM224-family orderable variants may share the footprint, but each replacement should be checked for temperature grade, supply range, offset, bandwidth, and ESD requirements before approval.
Is LM224KAD pin-compatible with LM224KDG4?
Yes, the LM224KAD is reported as a complete replacement for LM224KDG4, with matching terminals and package and consistent main performance characteristics. The LM224KAD is described as a four-channel, 1.2 MHz, 14-pin SOIC operational amplifier. Final design approval should still include a comparison of the manufacturer ordering table and electrical characteristics.
LM224KDG4 vs LM224KAD - which is better for replacement?
The LM224KAD is the stronger documented drop-in candidate because it is explicitly described as a complete replacement with consistent terminals, package, and main performance characteristics. The decision should still consider orderable temperature grade, device markings, and any procurement constraints. PCB changes should not be required if the selected part uses the same 14-pin SOIC pin arrangement.
When should I choose LM224KDG4 instead of a single op amp?
Choose the LM224KDG4 when the design needs four independent general-purpose amplifier channels and benefits from consolidating them into one 14-pin SOIC package. It is especially useful for multi-stage sensor conditioning, buffered outputs, feedback networks, and compact industrial control boards. A single amplifier remains preferable when only one channel is needed or when rail-to-rail input and output behavior is required.
Is LM224KDG4 suitable for audio preamplification?
The LM224KDG4 can be used for moderate-bandwidth, low-frequency audio preamplification because it provides four general-purpose channels and a 1.2 MHz gain-bandwidth product. Its 3 mV reported input offset voltage is more relevant to DC accuracy than ordinary audio signals. Check output swing, supply voltage, noise, and stability in the intended gain configuration before using it in a high-fidelity signal path.
What is the price of LM224KDG4?
Current unit pricing and quantity availability for LM224KDG4 should be requested through the Request a Quote form on this page. The quote form is the appropriate channel for checking current pricing, stock, minimum order quantity, and lead time. Because commercial terms can change by quantity and date, avoid relying on a stale historical catalog amount when preparing a new production BOM.
Where can I buy LM224KDG4 with current lead time information?
Use the Request a Quote form on this page to request current LM224KDG4 availability, lead time, minimum order quantity, and orderable package details. The manufacturer identifies the LM224K family on its official product page, while distributor listings can help identify the exact orderable MPN. Confirm the requested G4 packaging code before issuing a purchase order.
What are the key specifications of LM224KDG4 that engineers should know?
The key LM224KDG4 specifications are four amplifier channels, a 30 V maximum supply voltage, 1.2 MHz gain-bandwidth product, 3 mV reported input offset voltage, improved 2 kV ESD protection, and operation from -25 °C to +85 °C. The device is packaged in a 14-pin SOIC. These figures position it as a general-purpose quad amplifier for industrial, control, and moderate-bandwidth analog systems.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM224KDG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LM224KDG4 when a design needs four general-purpose amplifier channels, a 30 V maximum supply rating, 1.2 MHz bandwidth, and operation from -25 °C to +85 °C in a 14-pin SOIC package. It is a practical fit for industrial sensor conditioning, process-control boards, feedback networks, and moderate-bandwidth audio circuits. The LM224KAD is the most directly documented replacement candidate because its package, terminals, and principal performance characteristics are reported as consistent. LM224KDR and LM224KP can be considered within the same family after checking their orderable temperature and device details. LM224DR and LM224D require careful review of temperature limits and exact suffix configuration before use as replacements. If the circuit needs rail-to-rail input or output operation, very low offset, higher bandwidth, or automotive qualification, select a device explicitly specified for those requirements rather than relying only on package compatibility.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM224KAD LM224KDR LM224KP LM224DR LM224D
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Channels 4 4 4 4 4 4
Maximum Supply Voltage 30 V 30 V 30 V 30 V 30 V 30 V
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

মূল পার্থক্যসমূহ

  • Four amplifiers in one 14-pin SOIC package (বনামLM224KAD)
  • Matches the 30 V and 1.2 MHz core operating ratings (বনামLM224KDR)
  • Designed for a documented industrial operating range (বনামLM224DR)

ডিজাইন নোট

Place the supply-bypass capacitor immediately adjacent to the device supply pins, and keep each amplifier's input and feedback traces short. The four channels share package power and ground connections, so common-impedance effects can couple disturbance between channels. Route sensitive inputs away from switching-regulator outputs, power inductors, motor phases, and high-current return paths. The 1.2 MHz gain-bandwidth product makes trace length and parasitic capacitance more relevant as closed-loop gain rises.

Do not assume that the 30 V maximum supply rating permits full 30 V signal swing or rail-to-rail operation. Before using the LM224KDG4 with a sensor whose output approaches ground, verify the input common-mode range and output-swing limits in the manufacturer datasheet. Also confirm that the selected LM224 orderable variant maintains the required -25 °C to +85 °C operating range and the same 14-pin SOIC footprint.

Estimated: four amplifiers can make total supply-current demand more significant than that of a single-channel circuit. Calculate worst-case supply current using the maximum channel-current specification in the LM224K datasheet, multiply it by four, add bias and load requirements, and size the regulator and copper paths accordingly. Because this is a linear amplifier, heat rise also depends on total channel dissipation and the board's thermal resistance.

Use short, direct feedback components and avoid routing inputs near the exposed traces of adjacent channels. When operating at higher closed-loop gains, verify stability with the intended feedback network, source impedance, load capacitance, and board parasitics. The family is internally frequency compensated, but compensation does not remove the need to validate the final gain, bandwidth, and capacitive-loading combination.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit environmental or automotive compliance statements were identified for LM224KDG4. The industrial temperature grade does not by itself imply AEC-Q100 qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM224KDG4 datasheet LM224KDG4 pinout LM224KDG4 datasheet pdf LM224KDG4 equivalent LM224KDG4 replacement LM224KDG4 drop-in replacement LM224KDG4 cross reference LM224KDG4 vs LM224KAD LM224KDG4 SOIC-14 footprint LM224KDG4 price LM224KDG4 stock Texas Instruments LM224KDG4 LM224KDG4 industrial op amp LM224KDG4 signal conditioning

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM224KDG4 LM224KAD LM224KDR LM224KP LM224DR LM224D LM224K quad operational amplifier operational amplifier analog integrated circuit semiconductor general-purpose amplifier single-supply amplifier 14-pin SOIC SOIC package family surface-mount package SMD gain-bandwidth product input offset voltage input common-mode range power-supply rejection ratio industrial signal conditioning process control 2 kV ESD protection
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন