LM224KDG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments
MPN: LM224KDG4 ✓ 啟用中LM224KDG4 概覽
An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify small voltage differences. The LM224 belongs to the operational-amplifier hierarchy and provides four amplifier channels in one quad package. Each channel can amplify sensor, audio, or feedback signals independently. Internal frequency compensation makes the devices suitable for closed-loop designs without external compensation networks, although the available datasheet information should guide stability and unity-gain layout decisions.
The LM224KDG4 combines four general-purpose amplifier channels with a maximum supply voltage of 30 V. Its 1.2 MHz gain-bandwidth product supports signal paths extending from low-frequency measurement circuits to moderate-bandwidth audio and control applications. The reported input offset voltage is 3 mV, a parameter that contributes to DC error when the amplifier operates near its input limits or in precision current-feedback measurements.
The K suffix identifies an industrial temperature grade covering -25 °C to +85 °C. The four circuits share a common supply arrangement but otherwise operate independently, allowing one package to implement summing, buffering, amplification, filtering, or current-feedback stages. A listing identifies the device as a 14-SOIC surface-mount part with gull-wing terminals, while the ordering code G4 denotes its supplied packaging configuration.
Typical uses include industrial process-signal conditioning, low-frequency sensor interfaces, audio preamplification, feedback networks in power converters, and general control systems. Four channels in one package can reduce PCB area and simplify multi-amplifier analog boards. The 30 V supply capability also accommodates industrial rails higher than conventional 5 V or 12 V systems, subject to the common-mode and output-swing limits stated in the manufacturer datasheet.
PCB layout should keep input, feedback, and decoupling connections short, place the bypass capacitor close to the supply pins, and route sensitive input nodes away from switching and high-current paths. Because the LM224K is not rail-to-rail, verify input and output voltage ranges before choosing it for single-supply sensing near ground. This page combines package, temperature, bandwidth, and cross-reference information with practical guidance for evaluating same-footprint replacements.
直接替換替代品,適用於 LM224KDG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM224KDG4 (相同外形與佔位) — 差異在於 Package.
LM224KAD
✅ 直接替換聯絡詢價
查看資料表 →LM224KDR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM224KP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM224KDG4 最大額定值與電氣特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Channels | 4 circuits |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Input Offset Voltage | 3 mV |
| ESD Protection | 2 kV |
| 工作溫度範圍 | -25 °C to +85 °C |
| 封裝 | 14-pin SOIC |
| Terminal Count | 14 terminals |
| 安裝類型 | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
LM224KDG4 rectangular 腳位配置指南
LM224KDG4(rectangular 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM224KDG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM224KDG4 適用於 6 應用s: Industrial Sensor Signal Conditioning, Audio Preamplification, Power Supply Feedback Control, Process Control Loops, Data Acquisition Front Ends, Motor and Actuator Control.
Industrial Sensor Signal Conditioning
The LM224KDG4 is well suited to conditioning low-level industrial sensor signals because its four independent channels can amplify, buffer, and stage multiple inputs within one 14-pin SOIC package. The 1.2 MHz gain-bandwidth product provides useful bandwidth for common temperature, pressure, and position sensing paths, while the 30 V supply rating supports higher-voltage industrial control systems. Use two channels for sensor conditioning and the remaining channels for reference buffering or active filtering. Verify the input common-mode range against the sensor output because this general-purpose amplifier is not specified as rail-to-rail.
推薦
Audio Preamplification
The LM224KDG4 can implement four moderate-bandwidth audio preamplifier or mixer channels in a compact circuit. Its 1.2 MHz gain-bandwidth product is substantially above typical audio-bandwidth requirements, and the quad configuration allows left and right channels to be amplified while the other channels support gain or buffer stages. The 30 V maximum supply rating permits operation from elevated single rails when the circuit and output-swing requirements permit it. Because the device is not rail-to-rail, the designer should check output swing and input bias behavior in the selected gain network.
推薦
Power Supply Feedback Control
The LM224KDG4 can provide error amplification and feedback functions in industrial power-control systems because four channels are available in one package. Its 1.2 MHz bandwidth is suitable for moderate-speed feedback loops and its 30 V supply rating allows connection to higher-voltage control circuitry where appropriate. A practical allocation might use one channel for the error amplifier, one for output-voltage buffering, and two for current sensing or fault-path conditioning. The final loop compensation and stability network must be selected using the LM224K datasheet and the power-stage characteristics.
推薦
Process Control Loops
The LM224KDG4 fits process-control boards that require several conditioning channels around a controller. Each of the four amplifiers can handle a separate sensor input, actuator feedback signal, or buffered reference within a system operating from an elevated industrial rail. The 30 V maximum supply rating and -25 °C to +85 °C operating range align with many factory environments, while the 1.2 MHz gain-bandwidth product covers many slow control signals. Common-mode range, output swing, and stability must be checked for every loop rather than inferred from the family headline specifications.
推薦
Data Acquisition Front Ends
The LM224KDG4 can implement multiple input-buffer or gain stages ahead of an analog-to-digital converter in a low-frequency data-acquisition system. Four channels in one 14-pin SOIC reduce package count, and 1.2 MHz bandwidth is adequate for many temperature, pressure, and instrumentation signals rather than high-speed waveform capture. Use short feedback paths and verify settling behavior at the required gain. The amplifier should be bypassed close to its supply pins, and sensitive inputs should remain away from switching regulators and digital clock lines to minimize coupled noise.
推薦
Motor and Actuator Control
The LM224KDG4 can provide error amplification, current-loop feedback, and input conditioning around industrial actuator-control circuits. Its quad organization makes it practical to implement several related analog functions in a compact controller, and its 30 V supply rating accommodates elevated control rails better than standard 5 V-only devices. The 1.2 MHz bandwidth is appropriate for many low- and moderate-bandwidth actuator loops. Designers must verify output current, output swing, input common-mode limits, and stability, and should keep power-stage switching nodes separated from sensitive amplifier inputs.
推薦
推薦產品摘要
工程參考資料,適用於 LM224KDG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM224KAD | LM224KDR | LM224KP | LM224DR | LM224D |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Maximum Supply Voltage | 30 V | 30 V | 30 V | 30 V | 30 V | 30 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Four amplifiers in one 14-pin SOIC package (對比LM224KAD)
- Matches the 30 V and 1.2 MHz core operating ratings (對比LM224KDR)
- Designed for a documented industrial operating range (對比LM224DR)
設計說明
Place the supply-bypass capacitor immediately adjacent to the device supply pins, and keep each amplifier's input and feedback traces short. The four channels share package power and ground connections, so common-impedance effects can couple disturbance between channels. Route sensitive inputs away from switching-regulator outputs, power inductors, motor phases, and high-current return paths. The 1.2 MHz gain-bandwidth product makes trace length and parasitic capacitance more relevant as closed-loop gain rises.
Do not assume that the 30 V maximum supply rating permits full 30 V signal swing or rail-to-rail operation. Before using the LM224KDG4 with a sensor whose output approaches ground, verify the input common-mode range and output-swing limits in the manufacturer datasheet. Also confirm that the selected LM224 orderable variant maintains the required -25 °C to +85 °C operating range and the same 14-pin SOIC footprint.
Estimated: four amplifiers can make total supply-current demand more significant than that of a single-channel circuit. Calculate worst-case supply current using the maximum channel-current specification in the LM224K datasheet, multiply it by four, add bias and load requirements, and size the regulator and copper paths accordingly. Because this is a linear amplifier, heat rise also depends on total channel dissipation and the board's thermal resistance.
Use short, direct feedback components and avoid routing inputs near the exposed traces of adjacent channels. When operating at higher closed-loop gains, verify stability with the intended feedback network, source impedance, load capacitance, and board parasitics. The family is internally frequency compensated, but compensation does not remove the need to validate the final gain, bandwidth, and capacitive-loading combination.
合規資訊
No explicit environmental or automotive compliance statements were identified for LM224KDG4. The industrial temperature grade does not by itself imply AEC-Q100 qualification.