onsemi

LM293DR2G - Dual 36V Comparator | onsemi | Signal Control

MPN: LM293DR2G ✓ সক্রিয়
2 V to 36 V Vdss 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM293DR2G সারাংশ

The onsemi LM293DR2G is a dual precision voltage comparator rated for 2 V to 36 V operation, with a 1.3 µs response time and open-collector, open-drain outputs in an 8-pin SOIC package. The device contains two independent comparator channels and can operate from a single supply or split supplies, making it suitable for industrial threshold detection, sensing, and control circuits.

A voltage comparator is an analog signal-conditioning device that compares two input voltages and changes its output state when the non-inverting input exceeds the inverting input. Within the broader hierarchy of semiconductor components, the LM293DR2G belongs to the comparator category, analog signal-conditioning ICs, and power-management-adjacent control devices. Its two independent channels allow one package to perform two comparisons while sharing a common supply and ground.

The principal operating characteristics include a 2 V to 36 V supply range, a 1.3 µs response time, and a dual open-collector output architecture. The output structure can sink useful load current and requires an appropriate pull-up arrangement when driving subsequent digital stages. According to the onsemi LM293 family information, input offset voltage can be as low as 2.0 mV, while the LM293 series is designed for common-mode input operation down to ground with single-supply operation.

Each internal channel has differential inputs and an independently controlled output. Separate inputs allow the circuit designer to define the polarity of each decision, while separate output stages provide isolation between the two comparator functions. The 8-pin SOIC package supports conventional surface-mount assembly, but exposed-pad thermal management is not part of this package. Exact offset-voltage limits, input bias current, output-current limits, and channel-matching figures should be selected from the ordering information for the exact grade.

Typical uses include industrial sensor thresholds, motor and actuator control, power-supply monitoring, window or level detection, and general signal conditioning. In these systems, the comparator converts an analog relationship between two voltages into a logic-compatible indication that downstream control logic can process. The 36 V maximum supply capability is especially useful when the sensing circuit operates from an industrial bus rather than a low-voltage logic rail.

For dependable operation, treat each open-drain output as requiring a pull-up to the supply used by the receiving logic. Keep input and feedback traces short, provide a local supply bypass capacitor, and confirm that input voltages remain within the applicable common-mode and absolute-maximum limits. Account for output rise time after the pull-up resistor is added because the stated 1.3 µs response describes comparator propagation behavior, not the complete RC-controlled transition at the output node.

This product record combines the manufacturer family description with package, supply, temperature, and response-time details, then adds application guidance, pin-level implementation notes, and same-footprint comparison choices. These engineering views help designers evaluate the LM293DR2G as a dual comparator rather than treating it only as an eight-pin logic IC.

এর জন্য ড্রপ-ইন বিকল্প LM293DR2G — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM293DR2G (একই form factor এবং footprint) — পার্থক্য রয়েছে Common-Mode Input Range, Comparator Type, Response Time, Output Type, Package.

Texas Instruments
Comparator Type: Dual differential comparator
Response Time: 300 ns
Output Type: Open-collector
এর সাথে তুলনা করুন LM293DR2G →
onsemi
Common-Mode Input Range: Rail-to-rail
Comparator Type: Dual differential voltage comparator
Output Type: Open collector
এর সাথে তুলনা করুন LM293DR2G →
Texas Instruments
Common-Mode Input Range: 0 V to VCC − 1.5 V
Response Time: 1.3 µs (typical)
Output Type: Open-Collector
এর সাথে তুলনা করুন LM293DR2G →
onsemi
Common-Mode Input Range: Includes ground during single-supply operation
Comparator Type: Precision, general-purpose, dual comparator
Response Time: 1.3 us
এর সাথে তুলনা করুন LM293DR2G →

LM393DR2G

✅ ড্রপ-ইন
onsemi
📦 8-pin SOIC
Precision, general-purpose, dual comparator · 2 independent channels · Open collector · 2 V to 36 V · Supported · Supported · As low as 2.0 mV · Includes ground during single-supply operation

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903DR2G

✅ ড্রপ-ইন
onsemi
📦 8-pin SOIC
Dual differential voltage comparator · 2 channels · 2 independent channels · 2 V to 36 V · ±1 V to ±18 V · Open collector · 1.5 µs · 2.0 mV

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM293DR

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · Two independent comparators · Open-collector, open-drain · Rail-to-rail · Single supply or split supply

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM393DR

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ স্টকে আছে

$0.11 / ইউনিট

ডেটাশিট দেখুন →

LM2903DR

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 300 ns · 8-pin SOIC · Surface mount · -40 °C to +125 °C

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM293DR2G সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Comparator Type Dual precision voltage comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 36 V
Response Time 1.3 µs
আউটপুট টাইপ Open-collector, open-drain
Common-Mode Input Range Includes ground with single-supply operation
Input Offset Voltage As low as 2.0 mV for the LM293 series
অপারেটিং তাপমাত্রা -25 °C to +85 °C
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount
Channel Independence 2 independent comparator channels
Supply Configuration Single or split supply

LM293DR2G পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 OUT1 — Channel 1 open-collector, open-drain output
পিন 2 IN1- — Channel 1 inverting input
পিন 3 IN1+ — Channel 1 non-inverting input
পিন 4 GND — Ground reference
পিন 5 IN2+ — Channel 2 non-inverting input
পিন 6 IN2- — Channel 2 inverting input
পিন 7 OUT2 — Channel 2 open-collector, open-drain output
পিন 8 VCC — Positive supply input

সাধারণ ব্যবহার

LM293DR2G এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Threshold Detection, Motor and Actuator Control, Power-Supply Monitoring, Automotive and Battery System Interfaces, Consumer and IoT Condition Detection, Analog Signal Conditioning.

🏭

Industrial Sensor Threshold Detection

The LM293DR2G fits industrial threshold detection because its two independent channels can compare a conditioned sensor voltage against independent reference or limit voltages. Its 2 V to 36 V operating range supports compatibility with higher-voltage sensing and control environments, while the 1.3 µs response time allows rapid state transitions. Each open-drain output requires a pull-up to the logic rail. Place the pull-up close to the comparator, bypass the supply locally, and keep sensor and reference traces away from switching nodes to prevent false threshold crossings.

⚡

Motor and Actuator Control

The LM293DR2G can serve as the decision element in motor and actuator control by comparing a command or feedback voltage with a reference threshold. Its 1.3 µs response time helps minimize actuation delay, and the dual-channel arrangement can supervise two independent conditions within one 8-pin SOIC package. Because the outputs are open-drain, an appropriate pull-up and driver-stage interface are required rather than direct connection to a high-current load. Keep inductive power paths separate from the comparator inputs to avoid switching transients at the threshold input.

🔧

Power-Supply Monitoring

The LM293DR2G is appropriate for power-supply monitoring when a system must detect whether an analog rail has crossed a defined threshold. The 2 V to 36 V supply range accommodates monitoring of multiple industrial voltage classes, and the two channels can independently supervise positive and negative conditions. Its common-mode capability includes ground during single-supply operation, which supports low-side sensing. Use separate precision reference circuitry for accurate limits and ensure each open-drain output has a pull-up tied to the system’s valid logic level.

🚗

Automotive and Battery System Interfaces

The LM293DR2G can be evaluated for battery-powered and automotive interface circuits that compare sensed voltages within a 2 V to 36 V range. Its dual channels reduce package count when two system conditions must be evaluated, and the 1.3 µs response time supports prompt fault indication. The listed temperature grade is -25 °C to +85 °C, so a part explicitly qualified for wider automotive temperature requirements may be necessary. Any adopted output driver must be compatible with the open-drain interface and vehicle electrical conditions.

🧩

Consumer and IoT Condition Detection

The LM293DR2G is suitable for compact consumer or IoT modules that need to translate an analog condition into a digital signal, such as a level, window, or configuration threshold. Two independent comparator channels fit within one 8-pin SOIC package, and operation from a supply as low as 2 V supports embedded systems. The open-drain outputs can connect to a microcontroller input with a pull-up, but the resistor should be sized for the input’s leakage and logic-level requirements. Minimize input-node capacitance to preserve useful response speed.

📡

Analog Signal Conditioning

The LM293DR2G can convert a bipolar or unipolar analog signal into a logic indication when one input receives the signal and the other receives a reference. Its dual independent architecture supports two signal chains without requiring two packages, while common-mode operation down to ground helps simplify single-supply designs. The 1.3 µs response time is useful when the threshold must respond promptly, although the complete output edge also depends on pull-up resistance and input capacitance. Maintain adequate supply bypass and route feedback paths away from fast-switching circuitry.

What is the operating voltage range of LM293DR2G?
The LM293DR2G operates from 2 V to 36 V. According to the onsemi LM293 family information, each of its two channels can operate from a single supply or from split supplies. The 36 V upper capability allows the comparator to interface with higher-voltage industrial sensing circuits, while operation from 2 V supports low-voltage logic systems.
What are the key specifications of LM293DR2G that engineers should know?
The LM293DR2G is an 8-pin SOIC dual comparator with a 2 V to 36 V supply range, 1.3 µs response time, and open-collector, open-drain outputs. According to the onsemi LM293 product information, the two channels are independent, can use single or split supplies, and support common-mode input operation down to ground with a single supply.
Where can I download the LM293DR2G datasheet PDF?
The LM293DR2G datasheet can be obtained from the onsemi LM293 product page identified by the manufacturer’s direct link for this part. The manufacturer page provides the authoritative ordering information, electrical characteristics, and application guidance. Use the LM293 family documentation to confirm grade-specific limits, lead-finish options, and the exact SOIC-8 footprint before releasing a PCB design.
Where can I find the LM293DR2G pinout?
The LM293DR2G uses an 8-pin SOIC arrangement with one output, one inverting input, one non-inverting input, and ground for each channel, plus the shared supply. According to the onsemi LM293 family datasheet, channel A occupies pins 1 through 4 and channel B occupies pins 5 through 8. Use the manufacturer pin-description table when assigning PCB nets.
How fast is the LM293DR2G comparator response?
The LM293DR2G has a specified response time of 1.3 µs. According to the onsemi ordering information, this value applies to the dual comparator in its 8-pin SOIC configuration. The complete output transition can be longer because an open-drain output needs an external pull-up resistor, whose resistance and the receiving input capacitance determine the output rise time.
Does the LM293DR2G need pull-up resistors?
Yes, the LM293DR2G open-collector, open-drain outputs require pull-up resistors for a valid high output state. According to the onsemi LM293 family information, the output can sink current but cannot actively drive the rail high. Select the pull-up voltage to match the receiving logic and calculate its resistance from the required sink current and output-low voltage.
Can LM293DR2G operate from a single supply?
The LM293DR2G can operate from a single supply, and its common-mode input range includes ground under that configuration. According to the onsemi LM293 family description, the device can also use split supplies. This flexibility permits sensing near ground on a single-rail system or comparing signals around a midpoint in a dual-rail circuit.
LM293DR2G vs LM293DR - which is the better choice?
The LM293DR2G and LM293DR are dual open-collector comparators in 8-pin SOIC packages, but they come from different manufacturers. The onsemi LM293DR2G is specified for 2 V to 36 V operation and 1.3 µs response time, while the Texas Instruments page describes its B-version family as a drop-in replacement for LM293, LM393, and LM2903. Confirm ordering details and grade requirements before substitution.
When should I choose LM293DR2G over another dual comparator?
Choose the LM293DR2G when the design needs two independent precision comparator channels, a 2 V to 36 V supply range, and a 1.3 µs response time in an 8-pin SOIC package. According to the onsemi family information, split-supply operation and common-mode input operation down to ground are also supported. A competitor with push-pull outputs may be preferable only when pull-up circuitry is unwanted.
What is the best drop-in replacement for LM293DR2G?
The strongest drop-in candidates are dual comparators that share the 8-pin SOIC footprint, open-collector output arrangement, and 2 V to 36 V supply class. The Texas Instruments LM293DR is explicitly described by its manufacturer as a drop-in replacement for LM293, LM393, and LM2903, while onsemi’s LM393DR2G and LM2903DR2G are closely related dual-comparator options. Verify exact pin assignment and ordering details before production use.
Can LM2903DR2G replace LM293DR2G?
The LM2903DR2G is a closely related dual comparator and can be considered for an LM293DR2G redesign when the board uses the standard comparator pin arrangement. The onsemi family comparison places LM2903 in the same broader comparator group, and the Texas Instruments LM293 page describes the B-version as a drop-in replacement for LM293, LM393, and LM2903. Confirm offset, temperature-grade, and output requirements for the specific part.
Is LM293DR2G suitable for industrial sensor applications?
The LM293DR2G is suitable for many industrial sensor-threshold circuits because it operates from 2 V to 36 V and supports common-mode inputs down to ground with a single supply. Its two independent channels can monitor two conditions without separate packages. The listed operating range is -25 °C to +85 °C, so applications outside that range require a different qualified grade.
How do I calculate the open-drain pull-up resistor for LM293DR2G?
Choose the pull-up voltage first, then use the output-low voltage and required sink current to calculate the maximum resistance with RPU = (VPU - VOL) / ISINK. According to the onsemi LM293 family information, the output is open-drain, so every output connected to active-high logic needs this arrangement. Keep the resistor close enough to the device to limit trace capacitance and output rise time.
Where to buy LM293DR2G online and what is the current price?
Use the Request a Quote form on this page to ask for current LM293DR2G unit pricing, minimum order quantity, stock, and lead time. The Request a Quote workflow is the appropriate channel for a current commercial quotation and avoids publishing a price that may change without notice. Include the required SOIC-8 quantity and delivery location in the request.
What is the lead time and stock status for LM293DR2G?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Availability can vary with the ordered quantity and packaging configuration, so the manufacturer’s live product page should be checked for lifecycle and ordering details. Supply planning should include sufficient time for the selected trace quantity rather than relying on a historical catalog listing.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM293DR2G — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LM293DR2G when the design requires two independent comparators, a 2 V to 36 V operating range, a 1.3 µs response time, and open-drain outputs in an 8-pin SOIC package. LM393DR2G is a closely related onsemi option when its exact grade and electrical limits satisfy the design; it is not automatically interchangeable without checking offset voltage, temperature range, and output limits. LM2903DR2G provides another related dual-comparator path, but its grade-specific characteristics must be compared. Texas Instruments LM293DR, LM393DR, and LM2903DR use the same package class and are identified by the manufacturer as a drop-in replacement family for LM293, LM393, and LM2903 designs. For production substitution, verify pin assignments, supply limits, common-mode range, offset voltage, output sink current, temperature grade, and lifecycle status.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM393DR2G LM2903DR2G LM293DR LM393DR LM2903DR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand onsemi onsemi onsemi Texas Instruments Texas Instruments Texas Instruments
Comparator Channels 2 2 2 2 2 2
Supply Configuration Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply

মূল পার্থক্যসমূহ

  • Wide operating supply range (বনামLM393DR2G)
  • Two independent channels in one package (বনামLM293DR)
  • Open-drain output compatibility (বনামLM2903DR)

ডিজাইন নোট

Do not treat the 1.3 µs response time as the complete output transition time. The open-drain output changes state by sinking charge, while its rising edge is controlled by the pull-up resistor and total node capacitance. Choose the pull-up to meet the receiving logic’s rise-time requirement and place it close to the LM293DR2G output to limit parasitic capacitance.

Route the two differential input pairs as short, quiet traces and connect a local supply bypass capacitor from VCC to ground near pin 8. Keep switching-regulator, relay, and motor traces away from the input and reference nets. A solid ground plane helps establish the common reference, but input traces should still avoid areas containing high-di/dt currents.

Use separate reference and feedback paths, and avoid routing either input directly beside the open-drain output or pull-up node. Comparator inputs can respond to fast transients even when propagation delay is short. If the input source has high impedance, add a suitable bias network or guard area to limit leakage-induced error and maintain stable threshold behavior.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status must be confirmed for the exact LM293DR2G ordering code and manufacturing site using the manufacturer’s compliance documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

lm293dr2g datasheet LM293DR2G pinout LM293DR2G datasheet pdf LM293DR2G equivalent LM293DR2G replacement LM293DR2G cross reference LM293DR2G footprint LM293DR2G application circuit LM293DR2G price LM293DR2G stock onsemi LM293DR2G LM293DR2G vs LM293DR

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi Texas Instruments LM293DR2G LM393DR2G LM2903DR2G LM293DR LM393DR LM2903DR dual comparator precision voltage comparator analog comparator open-collector output open-drain output SOIC-8 surface-mount package semiconductor signal-conditioning IC single-supply operation split-supply operation common-mode input voltage input offset voltage response time industrial sensor interface power-supply monitoring
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন