NXP Semiconductors

LPC2129FBD64 - 60MHz ARM7 MCU with 256KB Flash | NXP

MPN: LPC2129FBD64 ✓ সক্রিয়
3.3 V Vdss 64-LQFP, 10 x 10 mm Package 60 MHz Speed 256 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LPC2129FBD64 সারাংশ

NXP LPC2129FBD64 is a 16/32-bit Arm7TDMI-S microcontroller with a 60 MHz maximum clock frequency, 256 KB of embedded flash memory, and a 64-LQFP 10 x 10 mm package. It integrates ISP/IAP programming, a 10-bit ADC, CAN connectivity, real-time emulation, and embedded trace support. These characteristics position the device as a compact embedded-control platform for industrial communications, data acquisition, and CAN-connected equipment.

An Arm7TDMI-S microcontroller combines a 32-bit ARM processor core with 16-bit Thumb instruction support. The LPC2129 family belongs to the broader hierarchy of Arm microcontrollers, embedded processors, and integrated circuits designed for real-time control. Its 128-bit memory interface and accelerator architecture support efficient 32-bit execution, while Thumb mode can reduce code footprint when memory capacity is constrained.

The 256 KB embedded high-speed flash provides dedicated program storage without an external memory device. ISP and IAP capabilities support programming and field-update workflows, while the integrated 10-bit ADC supports analog measurement and threshold-based control. CAN support is valuable for industrial networking, and boundary-scan functionality assists board-level validation. Real-time emulation and embedded trace improve debugging visibility for control-loop and communication diagnostics.

The 64-LQFP package uses a 0.5 mm terminal pitch and is designed for surface mounting. Its 10 x 10 mm body offers substantially more board area than smaller leadless packages while retaining through-board inspection visibility. The LPC2129's 60 MHz Arm7TDMI-S core is suitable for protocol processing, supervisory control, sensor interfaces, and embedded CAN nodes that do not require the software ecosystem of a newer Cortex-M MCU.

Typical applications include industrial CAN gateways, motor and machine controllers, building automation modules, data loggers, test equipment, and embedded instrumentation. The combination of on-chip flash, ADC, CAN, and debug support reduces external component count and simplifies firmware deployment where field programming and deterministic peripheral access are important.

Designers should confirm pin-level multiplexing, regulator tolerances, peripheral availability, and memory mapping against the NXP datasheet. Crystal and decoupling layouts should follow the manufacturer's reference configuration. Firmware migration should also verify startup code, bootloader behavior, and peripheral-driver compatibility because ARM7 and Cortex-M products use different exception and interrupt architectures.

This page consolidates the NXP product information, ordering variants, drop-in compatibility guidance, application guidance, and design considerations into one engineering-focused reference for selecting and implementing the LPC2129FBD64.

এর জন্য ড্রপ-ইন বিকল্প LPC2129FBD64 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LPC2129FBD64 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Memory Interface Width, Flash Memory, Operating Temperature, Programming Support.

NXP Semiconductors
Package: 64-pin LQFP, 10 mm x 10 mm
Flash Memory: 256 KB
Operating Temperature: -40 °C to +85 °C for LPC2124FBD64/00,15
এর সাথে তুলনা করুন LPC2129FBD64 →
NXP Semiconductors
Package: LQFP-64 (10x10 mm)
Memory Interface Width: 128-bit with accelerator
Flash Memory: 64 KB

LPC2129FBD64/01

✅ ড্রপ-ইন
📦 LQFP-64 (10 x 10 mm)
Same 60 MHz core and 256 KB flash; ordering-code revision differs by the /01 suffix, with no quantified core or memory change

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC2129FBD64/01,15

✅ ড্রপ-ইন
📦 LQFP-64 (10 x 10 mm)
Same 60 MHz core and 256 KB flash; /01,15 ordering qualification differs while clock and flash remain unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC2129FBD64,151

✅ ড্রপ-ইন
📦 LQFP-64 (10 x 10 mm)
Same 60 MHz Arm7TDMI-S configuration and 256 KB flash; ,151 ordering form replaces the base suffix

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC2129FBD64-S

✅ ড্রপ-ইন
📦 LQFP-64 (10 x 10 mm)
Same Arm7 MCU family and 256 KB flash configuration; -S ordering suffix indicates a distinct device code

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LPC2119FBD64

✅ ড্রপ-ইন
NXP Semiconductors
📦 LQFP-64 (10 x 10 mm)
Arm7TDMI-S 16/32-bit RISC · 60 MHz · 128 KB · 16 KB · 8 bit · 128 bit · 46 lines · 10 bit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC2132FBD64/01151

✅ ড্রপ-ইন
NXP Semiconductors
📦 LQFP-64 (10 x 10 mm)
ARM7TDMI-S (16/32-bit) · LPC2100 (LPC2131/32/34/36/38) · 60 MHz · 64 KB · 16 KB · 128-bit with accelerator · 3.0 V to 3.6 V (single 3.3 V supply) · 10-bit, multi-channel

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC2129FBD64 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 16/32-bit microcontroller
Processor Core Arm7TDMI-S
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 60 MHz
Embedded Flash Memory 256 KB
Flash Organization 256K x 8
ADC Resolution 10 bit
CAN Interface Yes
Programming Support ISP and IAP
Debug Support Real-time emulation and embedded trace
Boundary Scan Supported
Memory Interface Width 128 bit
প্যাকেজ 64-LQFP, 10 x 10 mm
Terminal Pitch 0.5 mm
মাউন্টিং টাইপ Surface mount
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
Nominal 3.3 V Supply 3.3 V
Nominal 1.8 V Supply 1.8 V

LPC2129FBD64 64-lqfp, 10 x 10 mm পিন কনফিগারেশন গাইড

LPC2129FBD64 (64-lqfp, 10 x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

LPC2129FBD64-এর জন্য 64-lqfp, 10 x 10 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LPC2129FBD64.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LPC2129FBD64 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial CAN Control Node, Data Acquisition and Sensor Interface, Embedded Test and Measurement Equipment, Building Automation Module, Machine and Motor Supervisory Controller, Field-Programmable Data Logger.

🏭

Industrial CAN Control Node

The LPC2129FBD64 fits an industrial CAN control node because it combines a 60 MHz Arm7TDMI-S core with an integrated CAN controller, 256 KB of flash, and a 10-bit ADC. The processor can manage protocol handling, supervisory logic, and analog monitoring without requiring a separate external memory device. Its -40°C to +85°C operating range and 64-LQFP package suit industrial equipment that must perform field firmware updates. A CAN transceiver, protection network, and isolated or non-isolated power architecture must still be designed around the MCU, while the embedded 256 KB supports application code, diagnostics, and ISP/IAP update workflows.

🧩

Data Acquisition and Sensor Interface

The LPC2129FBD64 is suitable for data-acquisition and sensor-interface equipment that benefits from an integrated 10-bit ADC and deterministic 60 MHz processing. Engineers can sample analog channels, filter readings, apply thresholds, and expose results through CAN or other serial peripherals while retaining 256 KB of embedded program storage. The 128-bit memory interface and accelerator architecture support efficient 32-bit code execution, while Thumb mode can reduce code size in space-sensitive firmware. Because the ADC is 10-bit, accuracy calculations must include reference-voltage tolerance, input impedance, sampling time, and the analog front end required by the sensor.

🔧

Embedded Test and Measurement Equipment

The LPC2129FBD64 can serve as the control processor in embedded test and measurement equipment where real-time sequencing, calibration data, and communication must be handled in one device. Its 60 MHz Arm7TDMI-S core provides timing headroom for instrument control, while 256 KB of flash stores firmware, calibration tables, and communication routines. Real-time emulation and embedded trace support development of timing-sensitive acquisition sequences, and boundary scan assists board-level validation. The 64-LQFP footprint remains inspectable after assembly, although its 0.5 mm pitch requires adequate board-routing and inspection capabilities.

🏭

Building Automation Module

The LPC2129FBD64 is appropriate for a building-automation module that coordinates sensors, actuators, and networked equipment. Its integrated ADC can monitor analog environmental or occupancy-related signals, while CAN can connect supervisory controllers to field equipment. The 256 KB flash capacity provides room for protocol stacks, scheduling logic, diagnostics, and over-the-air update components. Operation across -40°C to +85°C supports equipment located in controlled plant rooms, while the LQFP package offers a practical compromise between compact size and solder-joint inspection. The power design should accommodate both the identified 3.3 V and 1.8 V supply rails and peripheral load requirements.

⚡

Machine and Motor Supervisory Controller

The LPC2129FBD64 can act as a supervisory controller for industrial machines or motor systems where deterministic control, status monitoring, and network communications are required. At 60 MHz, the Arm7TDMI-S core can execute control logic and communicate over CAN while the 10-bit ADC handles feedback signals within its specified accuracy limits. Embedded flash enables application code and parameter storage, and ISP/IAP supports maintenance updates. Actual motor-drive safety, current sensing, and power-stage control require separate components because the microcontroller does not directly replace a gate driver or high-power stage.

🖥️

Field-Programmable Data Logger

The LPC2129FBD64 fits a field-programmable data logger that stores operating code and capture parameters in its 256 KB embedded flash and can be serviced through ISP or IAP. The integrated ADC supports periodic sensor conversion, while the 60 MHz processor leaves capacity for buffering, timestamps, event classification, and CAN-based transfer to a host. Its -40°C to +85°C range supports many industrial environments, and the LQFP package simplifies inspection and rework compared with a leadless package. Deployment planning should include flash endurance, update integrity, brownout handling, and recovery behavior for interrupted field programming.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

LPC2119FBD64 NXP Semiconductors ব্যবহৃত হয়: Industrial CAN Control Node, Data Acquisition and Sensor Interface, Building Automation Module, Machine and Motor Supervisory Controller LPC2132FBD64/01 Related LPC21xx controller for expanded design evaluation ব্যবহৃত হয়: Industrial CAN Control Node, Embedded Test and Measurement Equipment LPC2129FBD64/01 Related order code for firmware-driven sensor acquisition ব্যবহৃত হয়: Data Acquisition and Sensor Interface, Machine and Motor Supervisory Controller LPC2129FBD64/01,15 Related ordering configuration for embedded instrument control ব্যবহৃত হয়: Embedded Test and Measurement Equipment, Field-Programmable Data Logger LPC2129FBD64,151 Related LPC2129 ordering configuration ব্যবহৃত হয়: Building Automation Module LPC2129FBD64-S Related order code for field-configurable logging equipment ব্যবহৃত হয়: Field-Programmable Data Logger
What are the key specifications of LPC2129FBD64 that engineers should know?
The LPC2129FBD64 combines a 60 MHz Arm7TDMI-S core, 256 KB of embedded flash, a 10-bit ADC, CAN connectivity, and a 64-LQFP package. According to the NXP product page, its 128-bit memory interface and accelerator architecture support 32-bit code execution at the maximum clock rate. ISP/IAP programming, real-time emulation, embedded trace, and boundary scan provide integrated firmware-development and board-validation capabilities without requiring a separate external memory device.
What is the operating frequency and flash memory of LPC2129FBD64?
The LPC2129FBD64 operates at up to 60 MHz and contains 256 KB of embedded high-speed flash organized as 256K x 8. According to the NXP product page, the processor supports both 32-bit ARM instructions and 16-bit Thumb code. The Thumb mode can reduce code size, while the 128-bit memory interface and accelerator architecture help sustain 32-bit execution performance for communications, control, and data-processing tasks.
Where can I download the LPC2129FBD64 datasheet?
The official LPC2129FBD64 datasheet and product documentation can be reached through the NXP product page at https://www.nxp.com/part/LPC2129FBD64. The manufacturer documentation should be used to verify the 64-pin assignments, power requirements, clock configuration, memory map, peripheral multiplexing, and recommended application circuitry. Third-party datasheet mirrors can assist with archival viewing, but the NXP document should govern production design decisions.
Where can I find the LPC2129FBD64 pinout?
The LPC2129FBD64 pinout is defined by the manufacturer datasheet for its 64-LQFP package, including the 0.5 mm terminal pitch and 10 x 10 mm body dimensions. Use the NXP pin-description table when assigning power, ground, reset, clock, debug, communication, and GPIO signals. The product summary confirms the package and boundary-scan capability but does not reproduce every terminal name, so the datasheet pin table remains the authoritative assignment reference.
What interfaces are integrated in the LPC2129FBD64 microcontroller?
The LPC2129FBD64 integrates a 10-bit ADC and CAN connectivity alongside its Arm7TDMI-S processor, flash memory, and general-purpose peripherals. According to NXP product information, the device also supports ISP/IAP programming, real-time emulation, embedded trace, and boundary scan. These resources make it suitable for CAN-connected monitoring, supervisory industrial control, analog signal acquisition, and compact embedded instruments.
Is the LPC2129FBD64 suitable for industrial CAN applications?
The LPC2129FBD64 is suitable for industrial CAN applications because it combines a CAN interface, 60 MHz Arm7TDMI-S processing, 256 KB of embedded flash, and a 10-bit ADC in one package. The NXP operating range of -40°C to +85°C supports many industrial environments, while the 64-LQFP construction provides a practical surface-mount option for control cabinets and equipment. CAN transceiver selection and isolation remain separate board-level requirements.
Where can I buy LPC2129FBD64 online?
Use the Request a Quote form on this page to request LPC2129FBD64 availability, current unit pricing, and a quotation for the required quantity. The form allows procurement teams to confirm exact ordering-code suffix, packaging, production allocation, and delivery expectations before placing an order. Request current supply status rather than relying on an older catalog or listing snapshot.
What is the current price of LPC2129FBD64?
Current LPC2129FBD64 pricing should be obtained through the Request a Quote form on this page because quotations can depend on quantity, exact suffix, packaging, and current supply. The structured pricing information on this page contains no qualifying quantity-break table, so no static unit price should be treated as a current purchasing offer. Submit the required MPN and quantity to receive the applicable quotation.
What is the lead time and stock status for LPC2129FBD64?
Use the Request a Quote form on this page to confirm current stock, production allocation, and lead time for the exact LPC2129FBD64 ordering code. Supply status can vary by suffix, package, quantity, and manufacturing schedule, so older distribution records should not be treated as a live inventory commitment. Including the target quantity and required delivery date in the request enables a more useful procurement response.
What is the difference between LPC2129FBD64 and LPC2129FBD64/01,15?
Both LPC2129FBD64 and LPC2129FBD64/01,15 are identified as 64-LQFP NXP devices based on the Arm7TDMI-S core with a 60 MHz maximum frequency and 256 KB flash. The /01,15 ordering code distinguishes the device's specified ordering or qualification condition, but the web listing does not identify the exact commercial or temperature difference. Confirm the full part-number decoding and datasheet ordering table before substituting one order code for another.
LPC2129FBD64 vs LPC2119FBD64 - which is better for a new design?
The LPC2129FBD64 is the better choice when the design benefits from 256 KB of embedded flash, while the LPC2119FBD64 provides 128 KB in the same general LPC21xx platform. According to NXP family information, both families use the Arm7TDMI-S architecture and 64-LQFP options. Choose LPC2119FBD64 when 128 KB is sufficient and device qualification is appropriate; choose LPC2129FBD64 when code storage, ISP/IAP updates, or firmware growth justify the additional flash.
When should I choose LPC2129FBD64 over LPC2119FBD64?
Choose LPC2129FBD64 over LPC2119FBD64 when firmware size, field-update flexibility, or future code growth makes 256 KB of flash more useful than 128 KB. Both devices belong to the Arm7TDMI-S LPC21xx family and offer comparable core-oriented embedded-control capabilities. The 128 KB difference is the clearest selection factor, so compare the complete application firmware, bootloader, diagnostics, and update images against the required memory margin.
Can LPC2129FBD64 replace LPC2119FBD64 on an existing PCB?
The LPC2129FBD64 may be considered as a same-package upgrade from LPC2119FBD64, but the installed PCB should be checked for pin and peripheral compatibility before substitution. The family uses 64-LQFP options and both provide 128 KB or 256 KB flash variants, yet package equality alone does not establish identical peripheral population, startup behavior, or device identification. Review the manufacturer pin descriptions, memory organization, and application firmware requirements.
What can replace LPC2129FBD64?
The closest documented drop-in choices are the LPC2129FBD64 order-code variants, including LPC2129FBD64/01, LPC2129FBD64/01,15, LPC2129FBD64,151, and LPC2129FBD64-S. Each is associated with the same 64-LQFP Arm7TDMI-S platform and 256 KB flash configuration, while LPC2119FBD64 provides a 128 KB flash alternative for firmware-compatible designs. No qualified cross-brand drop-in replacement is identified, and firmware, qualification, and exact ordering requirements must still be verified.
Is there an equivalent NXP Semiconductors drop-in replacement for LPC2129FBD64?
The NXP order-code variants are the most direct equivalent choices because they retain the 60 MHz Arm7TDMI-S core, 256 KB embedded flash, and 64-LQFP package format. LPC2119FBD64 is a related family member with 128 KB flash, while LPC2132FBD64/01 appears in a published comparison but differs enough that firmware and peripheral compatibility require review. No verified cross-manufacturer part can be treated as a drop-in replacement for this legacy Arm7 design.
Does LPC2129FBD64 support boundary scan and embedded debugging?
The LPC2129FBD64 supports boundary-scan functionality and includes real-time emulation with embedded trace. According to the NXP product description, these capabilities are integrated into the LPC2109, LPC2119, and LPC2129 family. Boundary scan can assist production testing and interconnect inspection, while embedded trace exposes processor activity during development. The exact trace connector and debug interface wiring should be taken from the manufacturer reference design.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LPC2129FBD64 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LPC2129FBD64 for legacy or maintenance designs that require 256 KB of embedded flash, a 60 MHz Arm7TDMI-S core, an integrated 10-bit ADC, CAN, and a 64-LQFP footprint. The /01, /01,15, ,151, and -S order codes are the closest choices when a production variant must match a specific qualification, marking, or purchasing requirement; confirm the suffix meaning and operating condition before substitution. Choose LPC2119FBD64 when 128 KB of flash is sufficient and reducing code-storage requirements matters more. LPC2132FBD64/01 may be relevant when evaluating another LPC21xx member, but its detailed flash and peripheral configuration must be checked before treating it as a drop-in replacement. No cross-brand equivalent is qualified here because changing from Arm7TDMI-S to another MCU architecture requires firmware, startup, peripheral, and memory-system migration.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LPC2129FBD64/01 LPC2129FBD64/01,15 LPC2119FBD64
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package LQFP-64 (10 x 10 mm) LQFP-64 (10 x 10 mm) LQFP-64 (10 x 10 mm) LQFP-64 (10 x 10 mm)
Processor Core Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S
Maximum Clock Frequency 60 MHz 60 MHz 60 MHz 60 MHz
Embedded Flash Memory 256 KB 256 KB 256 KB 128 KB
ADC Resolution 10 bit 10 bit 10 bit 10 bit
CAN Interface Yes Yes Yes Yes
Programming Support ISP and IAP ISP and IAP ISP and IAP ISP and IAP

মূল পার্থক্যসমূহ

  • Provides twice the flash capacity of the LPC2119FBD64 family member (বনামLPC2119FBD64)
  • Retains the same 60 MHz Arm7TDMI-S performance in the closest LPC2129 ordering configurations (বনামLPC2129FBD64/01,15)
  • Combines CAN, a 10-bit ADC, and on-chip flash in one MCU (বনামLPC2132FBD64/01)
  • Supports a compact 64-LQFP footprint with inspectable leads (বনামLPC2129FBD64/01)

ডিজাইন নোট

Plan the power tree around the device's identified 1.8 V and 3.3 V operating rails, including the exact core, I/O, analog, and peripheral supply requirements in the manufacturer datasheet. Place the required bypass capacitors at their designated supply pins with short ground returns, and separate sensitive analog routing from switching-node and high-current return paths. Validate startup sequencing, brownout behavior, and regulator headroom across the full temperature range before releasing a production design.

Use the manufacturer reference layout for the 64-LQFP footprint, including the 10 x 10 mm body, 0.5 mm pitch, pad dimensions, and exposed thermal strategy if specified. Confirm land geometry against the current package drawing rather than scaling a generic LQFP footprint. Preserve access to the debug, reset, clock, and programming signals, and place decoupling close to the corresponding pins. Adequate copper and thermal-via coverage improve heat transfer from the 60 MHz processing device.

Do not assume that equal package dimensions guarantee firmware compatibility across LPC21xx devices. Verify startup configuration, memory sizes, interrupt vectors, peripheral availability, pin multiplexing, and device identifiers before substituting LPC2119FBD64 or LPC2132FBD64/01. For exact LPC2129 order-code variants, confirm the suffix meaning, qualification status, and intended operating conditions in the ordering table. Use the Request a Quote form to confirm the exact production MPN before placing an order.

Treat clock, reset, debug-trace, and high-speed memory signals as potentially timing-sensitive even though the device operates from a comparatively moderate 60 MHz. Follow the NXP recommended crystal, oscillator, reset, and debug-circuit arrangements, and keep clock routing short and away from CAN, ADC, and switching-supply paths. For CAN communication, keep the transceiver placement close to the connector, provide the required protection and return path, and follow the transceiver layout guidance to limit radiated emissions and susceptibility.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The product information identifies the device as an industrial-temperature microcontroller but does not provide definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 status is not applicable to the base industrial part designation.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

lpc2129fbd64 datasheet LPC2129FBD64 specifications LPC2129FBD64 pinout LPC2129FBD64 datasheet pdf LPC2129FBD64 equivalent LPC2129FBD64 replacement LPC2129FBD64 vs LPC2119FBD64 LPC2129FBD64 vs LPC2132FBD64 LPC2129FBD64 LQFP-64 footprint LPC2129FBD64 CAN application LPC2129FBD64 ADC interface NXP LPC2129FBD64 price LPC2129FBD64 stock LPC2129FBD64 lead time LPC2129FBD64 programming guide

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors LPC2129FBD64 LPC2129FBD64/01 LPC2129FBD64/01,15 LPC2119FBD64 LPC2132FBD64/01 Arm7TDMI-S ARM7 microcontroller microcontroller embedded processor ISP IAP CAN controller 10-bit ADC embedded flash memory real-time emulation embedded trace boundary scan LQFP-64 surface-mount package industrial control CAN networking sensor acquisition field-programmable data logger 256 KB flash memory
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন