LPC2129FBD64 - 60MHz ARM7 MCU with 256KB Flash | NXP
MPN: LPC2129FBD64 ✓ 啟用中LPC2129FBD64 概覽
An Arm7TDMI-S microcontroller combines a 32-bit ARM processor core with 16-bit Thumb instruction support. The LPC2129 family belongs to the broader hierarchy of Arm microcontrollers, embedded processors, and integrated circuits designed for real-time control. Its 128-bit memory interface and accelerator architecture support efficient 32-bit execution, while Thumb mode can reduce code footprint when memory capacity is constrained.
The 256 KB embedded high-speed flash provides dedicated program storage without an external memory device. ISP and IAP capabilities support programming and field-update workflows, while the integrated 10-bit ADC supports analog measurement and threshold-based control. CAN support is valuable for industrial networking, and boundary-scan functionality assists board-level validation. Real-time emulation and embedded trace improve debugging visibility for control-loop and communication diagnostics.
The 64-LQFP package uses a 0.5 mm terminal pitch and is designed for surface mounting. Its 10 x 10 mm body offers substantially more board area than smaller leadless packages while retaining through-board inspection visibility. The LPC2129's 60 MHz Arm7TDMI-S core is suitable for protocol processing, supervisory control, sensor interfaces, and embedded CAN nodes that do not require the software ecosystem of a newer Cortex-M MCU.
Typical applications include industrial CAN gateways, motor and machine controllers, building automation modules, data loggers, test equipment, and embedded instrumentation. The combination of on-chip flash, ADC, CAN, and debug support reduces external component count and simplifies firmware deployment where field programming and deterministic peripheral access are important.
Designers should confirm pin-level multiplexing, regulator tolerances, peripheral availability, and memory mapping against the NXP datasheet. Crystal and decoupling layouts should follow the manufacturer's reference configuration. Firmware migration should also verify startup code, bootloader behavior, and peripheral-driver compatibility because ARM7 and Cortex-M products use different exception and interrupt architectures.
This page consolidates the NXP product information, ordering variants, drop-in compatibility guidance, application guidance, and design considerations into one engineering-focused reference for selecting and implementing the LPC2129FBD64.
直接替換替代品,適用於 LPC2129FBD64 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LPC2129FBD64 (相同外形與佔位) — 差異在於 Package, Memory Interface Width, Flash Memory, Operating Temperature, Programming Support.
LPC2129FBD64/01
✅ 直接替換📋 參考替代品(不在目錄中)
LPC2129FBD64/01,15
✅ 直接替換📋 參考替代品(不在目錄中)
LPC2129FBD64,151
✅ 直接替換📋 參考替代品(不在目錄中)
LPC2129FBD64-S
✅ 直接替換📋 參考替代品(不在目錄中)
LPC2119FBD64
✅ 直接替換聯絡詢價
查看資料表 →LPC2132FBD64/01151
✅ 直接替換聯絡詢價
查看資料表 →LPC2129FBD64 最大額定值與電氣特性
| Product Type | 16/32-bit microcontroller |
| Processor Core | Arm7TDMI-S |
| 最大時脈頻率 | 60 MHz |
| Embedded Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| ADC Resolution | 10 bit |
| CAN Interface | Yes |
| Programming Support | ISP and IAP |
| Debug Support | Real-time emulation and embedded trace |
| Boundary Scan | Supported |
| Memory Interface Width | 128 bit |
| 封裝 | 64-LQFP, 10 x 10 mm |
| Terminal Pitch | 0.5 mm |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40°C to +85°C |
| Nominal 3.3 V Supply | 3.3 V |
| Nominal 1.8 V Supply | 1.8 V |
LPC2129FBD64 64-lqfp, 10 x 10 mm 腳位配置指南
LPC2129FBD64(64-lqfp, 10 x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LPC2129FBD64.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC2129FBD64 適用於 6 應用s: Industrial CAN Control Node, Data Acquisition and Sensor Interface, Embedded Test and Measurement Equipment, Building Automation Module, Machine and Motor Supervisory Controller, Field-Programmable Data Logger.
Industrial CAN Control Node
The LPC2129FBD64 fits an industrial CAN control node because it combines a 60 MHz Arm7TDMI-S core with an integrated CAN controller, 256 KB of flash, and a 10-bit ADC. The processor can manage protocol handling, supervisory logic, and analog monitoring without requiring a separate external memory device. Its -40°C to +85°C operating range and 64-LQFP package suit industrial equipment that must perform field firmware updates. A CAN transceiver, protection network, and isolated or non-isolated power architecture must still be designed around the MCU, while the embedded 256 KB supports application code, diagnostics, and ISP/IAP update workflows.
推薦
Data Acquisition and Sensor Interface
The LPC2129FBD64 is suitable for data-acquisition and sensor-interface equipment that benefits from an integrated 10-bit ADC and deterministic 60 MHz processing. Engineers can sample analog channels, filter readings, apply thresholds, and expose results through CAN or other serial peripherals while retaining 256 KB of embedded program storage. The 128-bit memory interface and accelerator architecture support efficient 32-bit code execution, while Thumb mode can reduce code size in space-sensitive firmware. Because the ADC is 10-bit, accuracy calculations must include reference-voltage tolerance, input impedance, sampling time, and the analog front end required by the sensor.
推薦
Embedded Test and Measurement Equipment
The LPC2129FBD64 can serve as the control processor in embedded test and measurement equipment where real-time sequencing, calibration data, and communication must be handled in one device. Its 60 MHz Arm7TDMI-S core provides timing headroom for instrument control, while 256 KB of flash stores firmware, calibration tables, and communication routines. Real-time emulation and embedded trace support development of timing-sensitive acquisition sequences, and boundary scan assists board-level validation. The 64-LQFP footprint remains inspectable after assembly, although its 0.5 mm pitch requires adequate board-routing and inspection capabilities.
推薦
Building Automation Module
The LPC2129FBD64 is appropriate for a building-automation module that coordinates sensors, actuators, and networked equipment. Its integrated ADC can monitor analog environmental or occupancy-related signals, while CAN can connect supervisory controllers to field equipment. The 256 KB flash capacity provides room for protocol stacks, scheduling logic, diagnostics, and over-the-air update components. Operation across -40°C to +85°C supports equipment located in controlled plant rooms, while the LQFP package offers a practical compromise between compact size and solder-joint inspection. The power design should accommodate both the identified 3.3 V and 1.8 V supply rails and peripheral load requirements.
推薦
Machine and Motor Supervisory Controller
The LPC2129FBD64 can act as a supervisory controller for industrial machines or motor systems where deterministic control, status monitoring, and network communications are required. At 60 MHz, the Arm7TDMI-S core can execute control logic and communicate over CAN while the 10-bit ADC handles feedback signals within its specified accuracy limits. Embedded flash enables application code and parameter storage, and ISP/IAP supports maintenance updates. Actual motor-drive safety, current sensing, and power-stage control require separate components because the microcontroller does not directly replace a gate driver or high-power stage.
推薦
Field-Programmable Data Logger
The LPC2129FBD64 fits a field-programmable data logger that stores operating code and capture parameters in its 256 KB embedded flash and can be serviced through ISP or IAP. The integrated ADC supports periodic sensor conversion, while the 60 MHz processor leaves capacity for buffering, timestamps, event classification, and CAN-based transfer to a host. Its -40°C to +85°C range supports many industrial environments, and the LQFP package simplifies inspection and rework compared with a leadless package. Deployment planning should include flash endurance, update integrity, brownout handling, and recovery behavior for interrupted field programming.
推薦
推薦產品摘要
工程參考資料,適用於 LPC2129FBD64 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC2129FBD64/01 | LPC2129FBD64/01,15 | LPC2119FBD64 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-64 (10 x 10 mm) | LQFP-64 (10 x 10 mm) | LQFP-64 (10 x 10 mm) | LQFP-64 (10 x 10 mm) |
| Processor Core | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S |
| Maximum Clock Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Embedded Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit |
| CAN Interface | Yes | Yes | Yes | Yes |
| Programming Support | ISP and IAP | ISP and IAP | ISP and IAP | ISP and IAP |
主要差異化特點
- Provides twice the flash capacity of the LPC2119FBD64 family member (對比LPC2119FBD64)
- Retains the same 60 MHz Arm7TDMI-S performance in the closest LPC2129 ordering configurations (對比LPC2129FBD64/01,15)
- Combines CAN, a 10-bit ADC, and on-chip flash in one MCU (對比LPC2132FBD64/01)
- Supports a compact 64-LQFP footprint with inspectable leads (對比LPC2129FBD64/01)
設計說明
Plan the power tree around the device's identified 1.8 V and 3.3 V operating rails, including the exact core, I/O, analog, and peripheral supply requirements in the manufacturer datasheet. Place the required bypass capacitors at their designated supply pins with short ground returns, and separate sensitive analog routing from switching-node and high-current return paths. Validate startup sequencing, brownout behavior, and regulator headroom across the full temperature range before releasing a production design.
Use the manufacturer reference layout for the 64-LQFP footprint, including the 10 x 10 mm body, 0.5 mm pitch, pad dimensions, and exposed thermal strategy if specified. Confirm land geometry against the current package drawing rather than scaling a generic LQFP footprint. Preserve access to the debug, reset, clock, and programming signals, and place decoupling close to the corresponding pins. Adequate copper and thermal-via coverage improve heat transfer from the 60 MHz processing device.
Do not assume that equal package dimensions guarantee firmware compatibility across LPC21xx devices. Verify startup configuration, memory sizes, interrupt vectors, peripheral availability, pin multiplexing, and device identifiers before substituting LPC2119FBD64 or LPC2132FBD64/01. For exact LPC2129 order-code variants, confirm the suffix meaning, qualification status, and intended operating conditions in the ordering table. Use the Request a Quote form to confirm the exact production MPN before placing an order.
Treat clock, reset, debug-trace, and high-speed memory signals as potentially timing-sensitive even though the device operates from a comparatively moderate 60 MHz. Follow the NXP recommended crystal, oscillator, reset, and debug-circuit arrangements, and keep clock routing short and away from CAN, ADC, and switching-supply paths. For CAN communication, keep the transceiver placement close to the connector, provide the required protection and return path, and follow the transceiver layout guidance to limit radiated emissions and susceptibility.
合規資訊
The product information identifies the device as an industrial-temperature microcontroller but does not provide definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 status is not applicable to the base industrial part designation.